Search

The paper presents a GIS plugin, named Bridge Assessment System via MTInSAR (BAS-MTInSAR), aimed at assessing deformations in existing simply supported concrete girder bridges through Multi-Temporal Interferometry Synthetic Aperture Radar (MTInSAR). Existing bridges require continuous maintenance to ensure functionality toward external effects undermining the safety of these structures, such as aging, material degradation, and environmental factors. Although effective and standardized methodologies exist (e.g., structural monitoring, periodic onsite inspections), new emerging technologies could be employed to provide time- and cost-effective information on the current state of structures and to drive prompt interventions to mitigate risk. One example is represented by MTInSAR data, which can provide near-continuous information about structural displacements over time. To easily manage these data, the paper presents BAS-MTInSAR. The tool allows users to insert information of the focused bridge (displacement time series, structural information, temperature data) and, through a user-friendly GUI, observe the occurrence of abnormal deformations. In addition, the tool implements a procedure of multisource data management and defines proper thresholds to assess bridge behavior against current code prescriptions. BAS-MTInSAR is fully described throughout the text and was tested on a real case study, showing the main potentialities of the tool in managing bridge portfolios. [ABSTRACT FROM AUTHOR]

In professional practice, the design and verification of Reinforced Concrete (RC) and Prestressed Reinforced Concrete (PRC) structures are performed using a simplified calculation provided by the Eurocodes that limits resistance but that also includes a certain level of structural safety. Some aspects that directly affect the simplified methods involve the use of linear constitutive laws of materials. The use of non-linear laws is evident in the exploitation of reservoirs of strength and deformations of plastic materials in the Ultimate Limit State. The purpose of this research is to evaluate the increase in resistance to bending actions during the plasticization of the beam of existing bridges to support the decision-making process of the engineer in the assessment of existing structures. To achieve this, two codes (MEG Ductility, MEG Fiber Sections) were developed to provide the moment–curvature diagram of RC and PRC sections using non-linear bonds, and in this paper, the study of RC sections is reported. Furthermore, through a push-down analysis, two RC and PRC viaducts have been analyzed using the moment–curvature characteristics obtained from the realized codes and by varying the non-linear constitutive bonds. The results of this study provide valuable insights into the behavior of RC structures under bending actions and demonstrate the importance of considering non-linear material laws for accurate structural assessments. The findings contribute to the enhancement of the decision-making process of engineers when dealing with existing infrastructures. [ABSTRACT FROM AUTHOR]

The safety of existing bridges represents a serious problem in Italy since these structures are fundamental for the national transportation system and, at the same time, can be subject to significant deterioration phenomena linked to the fact that the construction period typically dates back to the 1960s. This study involves the seismic analysis of five case study bridges belonging to the Italian Road Network. Using nonlinear time–history analysis with sets of code-spectrum compatible ground motions, analytical fragility curves have been constructed for each of the five bridges. The results obtained interpreting the analytical fragility curves agree with the fact that the seismic behavior of existing bridges can be problematic and that higher seismicity can be associated with more detrimental behavior. In particular, the results reveal that in regions with higher seismicity, the main problems in bridges are related to bearings and connecting elements located in the piers. Five case studies have also been analyzed to determine the Structural and Foundational Class of Attention and Seismic Class of Attention, following the approach proposed by the 2020 Italian Guidelines. In this way, it is possible to compare two different assessment approaches with different safety levels. The results obtained with the two approaches are in good agreement considering bridges in high seismicity regions, while the procedure of the Guidelines could lead to not reflecting the seismic behavior of bridges when the seismicity of the area is lower. [ABSTRACT FROM AUTHOR]

Advanced reliability assessment can be required when evaluating existing bridge structures through proof load testing. The target load of a proof load test typically requires input from resistance models; however, bridges with a low documentation level are often the most relevant for proof load testing, and resistance models thus involve significant uncertainties. This paper presents a different approach to proof loading and target proof load, in which the resistance model is not included in the determination of this load. Instead, the target proof load is determined based on load models coupled to the desired target failure probability, thus ensuring sufficient safety of the existing bridge. The method is in line with the proposal for a new Eurocode on assessment of existing structures and is deemed to be superior to existing approaches. An essential assumption of the method is that monitoring systems can identify stop criteria before irreversible damage occurs. The approach was applied in a case study, where an OT-slab bridge with a span of 6.5 m was proof-load-tested and reclassified for capacity upgrading of a road stretch in Denmark. [ABSTRACT FROM AUTHOR]

This paper provides a discussion and thoughtful application on a large sample of the procedures for the classification of existing bridges recently adopted in Italy and defined within the Italian Guidelines for the classification, risk management, safety evaluation and monitoring of existing bridges and the early published Operating Instructions. Focusing on the classification at the territorial level, first the logic flows to the classification on the base of the structural risk are shown, resulting in the definition of the "structural warning class", providing the motivations that support the criteria for the definition of such procedures. Then, a statistical analysis of the results obtained from the classification of 661 existing Italian bridges is performed, focusing on the vulnerability classification and on the influence of each parameter on its evaluation. [ABSTRACT FROM AUTHOR]

The heritage of existing road infrastructures and in particular of bridges consists of structures that are approaching or exceeding their designed service life. Detrimental causes such as aging, fatigue and deterioration processes other than variation in loading conditions introduce uncertainties that make structural assessment a challenging task. Experimental data on their performances are crucial for a proper calibration of numerical models able to predict their behavior and life-cycle structural performance. In this scenario, an experimental research program was established with the aim of investigating a set of 50-year-old prestressed concrete bridge girders that were recovered from a decommissioned bridge. The activities included initial non-destructive tests, and then full-scale load tests followed by a destructive test on the material samples. This paper reports the experimental results of the full-scale tests conducted on the first group of four I-beams assumed to be in good condition from visual inspection at the time of testing. Loading tests were performed using a specifically designed steel reaction frame and a test setup equipment, as detailed in the present work. Due to the structural response of this first group of girders, a uniform behavior was found at both service and ultimate conditions. The failure mechanism was characterized by the crushing of the cast-in-situ top slab corresponding to a limited deflection, highlighting a non-ductile behavior. The outcomes of the experimental research are expected to provide new data for the life-cycle safety assessment of existing bridges through an extended database of validated experimental tests and models. [ABSTRACT FROM AUTHOR]

Orthotropic steel deck (OSD) bridges are lightweight constructions which are convenient, especially for the achievement of long spans. Conversely, due to the stress concentration in correspondence to the numerous and unavoidable welded construction details, this bridge typology is prone to fatigue cracking under the effect of cyclic loading with high-stress amplitudes. Existing OSD bridges are particularly vulnerable to fatigue damage accumulation because of the dated standards adopted at the time of their design and the fact that heavy lorries have increased in travel frequency and weight. In the present paper, a case study of a northern Italian existing highway viaduct, built in the 1990s, is presented and analyzed. The fatigue damage accumulation was carried out according to the fatigue load models for road bridges reported in Eurocode EN 1991-2 and the assessment criteria indicated in EN 1993-1-9. The stress amplitude, in correspondence to the critical details of the bridge, is assessed by means of detailed finite-element calculations carried out with the software MIDAS GEN®. The amplitude and frequency of the travelling weights are assessed based on real traffic monitoring from the highway. Moreover, an automatic "rain-flow" algorithm is implemented, which is able to detect each nominal stress variation above the fatigue limit. In general, the bridge is not fully compliant with today's standards when considering the entire duration of the prescribed life of the design. Countermeasures, like lane number reductions and lane reshaping, are critically analyzed since their effectiveness is questionable as far as the reduction in heavy traffic is concerned. Other interventions, like the replacement of the pavement in order to improve the stress redistribution upon the connection details below the wheel footprint, and continuous bridge inspections or monitoring, look more promising. [ABSTRACT FROM AUTHOR]

Existing reinforced concrete (RC) bridges that were designed in the decades between 1950 and 1990 exhibit inadequate structural safety with reference to both traffic loads and hazard conditions. Competent authorities are planning extensive inspections to collect data about these structures and to address retrofit interventions. In this context, Remotely Piloted Aircraft Systems (RPASs) represent a prospect to facilitate in-situ inspections, reducing time, cost and risk for the operators. A practice-oriented methodology to perform RPAS-based surveys is described. After that, a workflow to perform an in-situ RPAS inspection oriented to a photogrammetric data extraction is discussed. With the aim to connect the advantages of the RPAS technologies to the seismic risk assessment of bridges, a simplified mechanic-based procedure is described, oriented to map the structural risk in road networks and support prioritization strategies. A six-span RC bridge of the Basilicata road network, representing a typical Italian bridge typology is selected to practically describe the operating steps of the RPAS inspection and of the simplified seismic risk assessment approach. [ABSTRACT FROM AUTHOR]