Search

Optimizing heat generation capacity is crucial for geothermal system design and evaluation. Computer simulation is a valuable approach for determining the influence of various parameter combinations on a geothermal system's ability to produce heat. However, computer simulation evaluations are often computationally demanding since all potential parameter combinations must be examined, posing significant hurdles for heat generation performance evaluation and optimization. This research proposes an adaptive Kriging-based heat generation performance optimization method. Firstly, a two-horizontal-well geothermal system with rectangular multi-parallel fractures is constructed. The heat production performance optimization problem is then established, and the temperature and enthalpy of the outlet water are calculated using computer simulation and Kriging. A parameterized lower confidence bounding sampling scheme (PLCB) is developed to adaptively update Kriging in order to strike a compromise between optimization accuracy and computation burden. The outcomes of the optimization are compared to those of the Kriging-based optimization approach and other common infill options to demonstrate the efficiency of the proposed method. The outlet temperature curve obtained with PLCB-AKO-1 rose for a longer time and the heat generation power curve reached a stable output without a downward trend. According to the Friedman and Wilcoxon signed ranks tests, the PLCB-1-AKO technique is statistically superior to alternative strategies. [ABSTRACT FROM AUTHOR]

The Woka-Cuona rift zone on the southeastern side of the Qinghai-Tibet Plateau is characterized by complex geological background conditions, comprising three independent or semi-grabens that traverse from south to north across the Himalayan and Gangdise terranes. Conducting research on the distribution patterns and genesis mechanisms of geothermal resources within the Woka-Cuona rift zone has certain guiding significance for understanding the genesis mechanisms of the geothermal system in the southern Tibetan rift and its exploitation. This paper utilized methods such as data collection, ground investigations, and geochemical analyses to analyze the distribution characteristics and evolutionary processes of geothermal waters in the Cuona rift area based on the geological background conditions of the study area. The research findings demonstrate a significant correlation between the occurrence of geothermal waters in the Cuona rift zone and geological structures, with most geothermal waters primarily distributed near intersections of graben boundary faults and east–west-trending faults. Different regions exhibit variations in the intensity of geothermal activity and geochemical characteristics, with the genesis of geothermal waters associated with deep magmatic activity, characterized by Na+ and K+ as the primary cations and Cl− as the primary anions. Geothermal waters mainly originate from atmospheric precipitation and snowmelt water from surrounding mountainous areas, with recharge elevations ranging from 4500 to 6200 m and an average elevation of 5400 m. [ABSTRACT FROM AUTHOR]

High-temperature geothermal systems hold promise for sustainable and environmentally friendly power generation. However, China's geothermal power capacity significantly underutilizes its abundant resources. This study focuses on the geothermal potential of the Pamir Plateau, particularly its northeastern edge, where complex tectonic forces converge. We aim to unveil the mechanisms driving the emergence of high-temperature geothermal reservoirs in this unique geological setting. Hydrogeochemical analysis reveals diverse profiles in geothermal water, primarily derived from atmospheric precipitation. Estimation of reservoir temperatures and simulation of geotherms unveil distinct geothermal systems. Kongur exhibits a medium–low-temperature hydrothermal system and Tashkurgan demonstrates high-temperature hydrothermal system characteristics, while the Pamir's northeastern edge hints at a potential high-temperature dry geothermal system where there might not be a fault. These findings have important implications for sustainable energy development and future geothermal exploration. [ABSTRACT FROM AUTHOR]

To better understand the geothermal system of the Gonghe Basin, we deployed 471 magnetotelluric survey points with an average distance of 2~3 km, covering the eastern and southern areas of the Basin. We used ModEM inversion software to carry out 3D inversion of 431 survey points and established a 3D-electrical model at a depth of 50 km in the area. The resistivity model shows that the low resistivity in the shallow part of the basin is related to the Cenozoic loose sedimentary cover, while the resistivity values of the mountains around the basin and the magmatic rock uplift zone are higher. The electrical model also shows that the high-conductivity layer is widely distributed in the middle and lower crust (15~35 km) of the basin, and direction of the high-conductivity layer is consistent with that of NW–SE fault in the basin. These high-conductivity layers may be the principal reason for the high heat flow values in the Gonghe Basin. Our resistivity model also shows that there is an obvious discontinuity between high- and low-resistivity blocks at different depths in the middle and upper crust. These discontinuities are consistent with the faults observed on the surface, which are related to the strong topographic relief. Our electrical model shows that these faults in the middle and upper crust are connected with the high-conductivity layer as the channel of heat transfer to the shallow part. Finally, the heat energy is enriched in the Triassic granite to form dry hot rock (HDR). The 3D-magnetotelluric imaging results depict the 3D-distribution characteristics of the geothermal system in the eastern and southern parts of the Gonghe Basin. [ABSTRACT FROM AUTHOR]

The existence of high-temperature geothermal anomalies in the Gonghe Basin on the northeastern margin of the Tibetan Plateau has highlighted a new perspective on the geothermal system of the Himalayan-Tibetan Plateau orogen. In this study, we collected 32 groups of liquid and gas samples from geothermal water, rivers, and boreholes in the Gonghe basin to analyze hydrochemistry, stable isotopes, and geochronology, which allow us to further reveal the geothermal fluid circulations of geothermal reservoirs. The ion contents of liquids identify two distinguished types of water, namely the Na-SO4-Cl type primarily from geothermal water and the Na-SO4-HCO3 and Na-Ca-CO3-SO4 types primarily from cold water. The compositions of the hydrogen and oxygen isotopes of the samples indicate geothermal waters were recharged by atmospheric precipitation and 3000–4600 m high snow mountain meltwater, which may have experienced circulation of 16,300–17,300 years and mixtures of submodern and recent recharge water sources evidenced by isotopes of 3H, 13C, and 14C data. The 3He/4He ratios of these geothermal waters varying from 0.03 to 0.84 Ra further highlighted a crustal-dominated heat source in the region. The deep thermal reservoir temperature in the Gonghe Basin at 160 ± 10 °C and the depth of circulation of geothermal water is 2200–2500 m. Based on this evidence, we have established a geothermal fluid circulation model and refined the exchange processes of fluids and geothermal heat, further enriching the details of the geothermal system in Gonghe Basin. [ABSTRACT FROM AUTHOR]

Morocco has an important geothermal potential materialized by its several thermal springs which constitute an essential surface geothermal indicator. These springs are dispersed throughout the country and present in every major structural domain. However, a significant amount is concentrated in the northern and northeastern areas. Associated with the great hydrothermal system of eastern Morocco, the thermal spring of Goutitir emerges in the Meso-Cenozoic sedimentary formations located east of the Guercif Basin, composed of a mixture of clays, carbonates, and marls, covered in unconformity by Quaternary tabular molasses. The upflow of the thermal water is dependent of Alpine faults systems with N30 and N100 directions, which are probable reactivated Hercynian structures that facilitate its circulation to the surface. The Goutitir spring has been studied by an interdisciplinary approach to identify the origin of the thermal water, the rock–water interactions, and the reservoir temperatures, contributing to the establishment of the conceptual model of the associated hydrothermal system. This thermal water is of chloride-sodium type with a hyperthermal character (43–47 °C). The isotopic composition (δ18O = −8.7 to −8.35‰; δ2H = −58.6 to −54.3‰) indicates a meteoric origin and a recharging zone located at around 2000 m of altitude. The chemical composition allows to classify the water as chloride-sodium hydrochemical facies, stabilized at ~100 °C in crystalline basement rocks, which, according to seismic data, are located at ~3 km depth. The concentrations, patterns, and correlations of trace elements point out water–rock interaction processes between the deep water and basic magmatic rocks. The integration of the chemical and isotopic data and the surface geological context shows that the Goutitir water flows within a hydrothermal zone were basic to ultrabasic lamprophyres rich in gabbroic xenoliths outcrop, witnessing the existence, at depth, of basic plutons. Moreover, near the source, these veins are strongly altered and hydrothermalized, showing late recrystallization of centimetric-sized biotites. The chloride-sodium composition of this water may also be a testimony to the presence and reaction with the overlying Triassic saline and gypsiferous and Meso-Cenozoic mainly carbonated formations. [ABSTRACT FROM AUTHOR]

Geothermal is a renewable energy source, but this is not as often seen as other renewable energy sources, such as solar, wind, hydro, etc. Several applications could be implemented through geothermal energy, and heating & cooling systems are one of them. Because of the limits of technology, it is hard to improve cooling systems as an application. To address long-term sustainable space heating and cooling, it is imperative to develop geothermal technology. It is known as the oldest, most flexible, most adaptable, and most prevalent approach toward using renewable energy. Therefore, this review has reviewed the global development and challenges of geothermal energy for cooling systems. There are large reserves of geothermal energy available around the world, and numerous scholars have emphasized its importance, but due to a lack of knowledge, no operational work has been done in using these systems for cooling up to this point. This review paper examines globally available geothermal energy sources and technologies for environmentally friendly and sustainable cooling supplies. Finally, the benefits and challenges of geothermal systems for cooling are outlined to promote local, regional, and global investment in utilizing these resources for cooling. [ABSTRACT FROM AUTHOR]

Estimating deep geothermal reservoir temperatures is an essential mission of geothermal exploration and development. The thermal reservoir temperature estimated directly using geothermometry without comparative analysis is often far from the actual temperature. In this paper, taking the typical geothermal systems in the Xiamen Island–Zhangzhou area of southeastern China as an example, different methods such as a water–rock equilibrium analysis, SiO2 geothermometer, multi-mineral equilibrium diagram, and silica-enthalpy mixing model are used to make a quantitative and qualitative analysis of the chemical equilibrium of minerals and fluids in the geothermal system. Finally, the applicability of different methods was compared and analyzed, and the geothermal reservoir temperature was estimated using the appropriate method. The results show that the calculated results of the Si-enthalpy mixing model of a typical geothermal system in southeastern China are significantly high. At the same time, the SiO2 geothermometer (without vapor loss), which is closest to the results of the multi-mineral equilibrium diagram, was chosen as the geothermal reservoir temperature of the geothermal system in the study area. This study can provide a reference for the future selection of methods of deep geothermal reservoir temperature estimation in similar areas. [ABSTRACT FROM AUTHOR]

In this paper, we study the stationary configurations of a vapor-dominated geothermal system. We propose a general mathematical model, which turns out to be a free boundary problem, and we focus on the stationary solutions. The analysis, developed considering the data of the geothermal field in Larderello, Tuscany (Italy), shows that steady-stable states may exist both when the re-injection takes place in depth and when the natural recharge is distributed both in the area occupied by vapor and in the one occupied by liquid. [ABSTRACT FROM AUTHOR]

Southwestern Tibet plays a crucial role in the protection of the ecological environment and biodiversity of Southern Asia but lacks energy in terms of both power and fuel. The widely distributed geothermal resources in this region could be considered as potential alternative sources of power and heat. However, most of the known geothermal fields in Southwestern Tibet are poorly prospected and currently almost no geothermal energy is exploited. Here we present a case study mapping the Mapamyum (QP) geothermal field of Southwestern Tibet using audio magnetotellurics (AMT) and magnetotellurics (MT) methods. AMT in the frequency range 11.5-11,500 Hz was used to map the upper part of this geothermal reservoir to a depth of 1000 m, and MT in the frequency range 0.001-320 Hz was used to map the heat source, thermal fluid path, and lower part of the geothermal reservoir to a depth greater than 1000 m. Data from 1300 MT and 680 AMT stations were acquired around the geothermal field. Bostick conversion with electromagnetic array profiling (EMAP) filtering and nonlinear conjugate gradient inversion (NLCGI) was used for data inversion. The AMT and MT results presented here elucidate the geoelectric structure of the QP geothermal field, and provide a background for understanding the reservoir, the thermal fluid path, and the heat source of the geothermal system. We identified a low resistivity anomaly characterized by resistivity in the range of 1-8 Ω·m at a depth greater than 7 km. This feature was interpreted as a potential reflection of the partially melted magma in the upper crust, which might correlate to mantle upwelling along the Karakorum fault. It is likely that the magma is the heat source of the QP geothermal system, and potentially provides new geophysical evidence to understand the occurrence of the partially melted magmas in the upper crust in Southwestern Tibet. [ABSTRACT FROM AUTHOR]

The Campi Flegrei geothermal system sets in one of the most famous and hazardous volcanic caldera in the world. The geothermal dynamics is suspected to have a crucial role in the monitored unrest phases and in the eruption triggering as well. Numerical models in the literature do not properly consider the geochemical effects of fluid-rock interaction into the hydrothermal circulation and this gap limits the wholly understanding of the dynamics. This paper focuses on fluid-rock interaction effects at the Campi Flegrei and presents relevant information requested for reactive transport simulations. In particular, we provide: (1) an extensive review of available data and new petrographic analyses of the San Vito cores rearranged in a conceptual model useful to define representative geochemical and petrophysical parameters of rock formations suitable for numerical simulations and (2) the implemented thermodynamic and kinetic data set calibrated for the San Vito 1 well area, central in the geothermal reservoir. A preliminary 0D-geochemical model, performed with a different contribution of CO2 at high (165 °C) and low (85 °C) temperatures, firstly allows reproducing the hydrothermal reactions over time of the Campanian Ignimbrite formation, the most important deposits in the case study area. [ABSTRACT FROM AUTHOR]

The most promising Polish region in terms of its geothermal resource potential is the Podhale Trough in the Inner West Carpathians, where the thermal water occurs in the Eocene-Mesozoic strata. The origin and conditions of formation of the chemical composition of the thermal water are different in a regional scale due to the impact of infiltrating water on the chemical compounds present in nearby thermal intakes, chemical processes responsible for the concentration of major elements and residence time. The article presents the regional conceptual model in regard to the factors controlling the chemistry of thermal water from Podhale Trough and the conditions of its exchange. It was allowed by performing the hydrogeochemical characteristics of studied water and analyzing its changes according to flow direction from HCO3-Ca-Mg type to SO4-Cl-Na-Ca and SO4-Ca-Mg types. The hydrogeochemical modelling was also made allowing identification of the impact of reservoir rocks on the formation of the chemical composition. For confirmation of the theories formulated and for more accurate interpretation of the results obtained from hydrogeochemical modelling, hydrochemical indices were calculated, i.e., rHCO3−/rCl−, rNa+/rCl−, rCa2+/rMg2+, rCa2+/(rCa2+ + rSO42−) and rNa+/(rNa+ + rCl−). The results revealed the most important processes evolving the chemistry of thermal water are progressive freshening of the thermal water reservoir, which in the past was filled with salty water, dissolution of gypsum, and ongoing dolomitization. Conducted research presents the important factors that in the case of increased exploitation of thermal water in the Podhale Trough, may influence the quality of thermal water in terms of its physical and chemical parameters. [ABSTRACT FROM AUTHOR]

The results of total chromium determination (by ICP-OES method) in samples collected from nine working wells named GW1–GW9, exploiting geothermal water from the Podhale Trough (southern part of Poland, near the Tatra Mountains), which is used for recreational purposes, were implemented for hydrogeochemical modeling to indicate dominating chromium speciation. The reliability of the results was determined by the application of a quality assurance/quality control program, both in the laboratory and during field work. Based on chromium speciation, the risk associated with the utilization of geothermal water was calculated. The outcome showed that the concentration of Cr(III) is almost equal to the total chromium concentration (1–2 µg·L−1). Crtot concentrations were also used in a health risk assessment in the case of epidermal absorption (EDIderm) during bathing in thermal pools and four assumed scenarios in relation to the handling of geothermal water. The effect of the very low Crtot concentration in the analyzed water on health risk calculation was estimated as low (hazard quotient value <10−7). In the case of risk matrix analysis, the environmental risks were estimated as moderate, major and very severe, dependent on the assumed scenario. [ABSTRACT FROM AUTHOR]

The Italian building stock consists of buildings mainly constructed until the mid-20th century using pre-industrial construction techniques. These buildings require energy refurbishment that takes into account the preservation of their architectural heritage. In this view, this work studies an innovative integrated modelling and simulation framework consisting of the implementation of Historical Building Information Modeling (HBIM) for the energy retrofit of historical buildings with renewable geothermal HVAC system. To this aim, the field case study is part of a medieval complex in Central Italy (Perugia), as representative ancient rural offshore architecture in the European countryside. The system involves of a ground source heat pump, a water tank for thermal-energy storage connected to a low-temperature radiant system, and an air-handling unit. The building heating energy performance, typically influenced by thermal inertia in historical buildings, when coupled to the novel HVAC system, is comparatively assessed against a traditional scenario implementing a natural-gas boiler, and made inter-operative within the HBIM ad hoc platform. Results show that the innovative renewable energy system provides relevant benefits while preserving minor visual and architectural impact within the historical complex, and also in terms of both energy saving, CO2 emissions offset, and operation costs compared to the traditional existing system. The integrated HBIM approach may effectively drive the path toward regeneration and re-functioning of heritage in Europe. [ABSTRACT FROM AUTHOR]

An implicit finite difference numerical model has been developed to investigate the influence of fracture heterogeneity on the propagation of thermal front in a single horizontal fracture-matrix system. Instead of depending on a complex and data-demanding geostatistical method for a precise representation of fracture aperture, a statistical linear congruential generator (LCG) method was applied in the present study to replicate the unpredictable nature of fracture aperture morphology. The results have been compared with the parallel plate model and simple sinusoidal model. Finally, sensitivity analysis of fracture aperture size and fluid flow rate has been carried out to identify the conditions at which fracture heterogeneity is critical. The results indicate that LCG-aperture enhances the heat transfer between fracture and hot rock matrix compared to the parallel and sinusoidal fractures. Further, the temperature profiles in hot rock indicate that there was a greater loss of heat for the case of LCG-aperture (25% loss) compared to sinusoidal (16%) and parallel plate (8%) apertures. It was found that heterogeneity does not play a major role at small fracture aperture size (≤50 μm) and at low flow rates. However, as fracture aperture size increases, the heterogeneity plays a vital part even at low flow rates. [ABSTRACT FROM AUTHOR]