Search

Silk fibroin (SF) is an ideal material for microneedle (MN) preparation. However, long extraction and short storage durations limit its application. Furthermore, MNs prepared from SF alone are easy to break during skin insertion. In this study, a regenerated SF solution was autoclaved and freeze-dried to produce a stable and water-soluble SF sponge. The freeze-dried SF (FD-SF) solution was ultrasonically treated before being used in the fabrication of MNs. The ultrasonically modified SFMNs (US-SFMNs) were evaluated in comparison to FD-SFMNs made from FD-SF and conventional SFMNs made from regenerated SF. The results indicated that the FD-SF could be completely dissolved in water and remained stable even after 8 months of storage. FTIR and XRD analyses showed that SF in US-SFMNs had increased β-sheet content and crystallization compared to FD-SFMNs, by 7.3% and 8.1%, respectively. The US-SFMNs had higher mechanical strength than conventional SFMNs and FD-SFMNs, with a fracture force of 1.55 N per needle and a rat skin insertion depth of 370 μm. The US-SFMNs also demonstrated enhanced transdermal drug delivery and enzymatic degradation in vitro. In conclusion, the autoclaving and freeze drying of SF, as well as ultrasonication-induced MN preparation, provide promising SF-based microneedles for transdermal drug delivery. [ABSTRACT FROM AUTHOR]

In recent years, various aspects of research related to pervious concrete (PC) have progressed rapidly, and it is necessary to summarise and generalise the latest research results. This paper reviews and compares the raw materials of pervious concrete, examining elements such as porosity, permeability, mechanical properties, and durability. According to comparisons, we put forward an ideal aggregate model with Uneven Surface, which may reinforce the mechanical properties. By summarising the important issues of aggregate, particle size, water–cement ratio, additives and admixtures, mixing ratio design, mixing and moulding, and other factors that affect porosity, new design methods are proposed. A new effective stress model of pervious concrete based on continuous porosity and Terzaghi effective stress is developed which may fit the effective stress principle better. Finally, by summarising the research frontiers of pervious concrete, key issues that need to be addressed in future scientific research on pervious concrete are raised. [ABSTRACT FROM AUTHOR]

An ultrafine-grained Al71Ni14.5Co14.5/CNT poly-quasicrystal (QC/CNT) composite was synthesized using spark plasma sintering of powder components developed through electroless Ni-P/CNT plating of Co particles and mechanical alloying. The performance of the synthesized samples was studied using various testing methods, such as room temperature/hot compression, wear, and corrosion tests. The results were compared to the properties of alloy samples fabricated from raw and coated powders (without CNTs). The wear rate and friction coefficient of the quasicrystalline samples improved significantly due to the contribution of the CNTs. The wear rate of the CNT-containing specimens was 0.992 × 10−4 mm3/N/m, which is 47.1% lower than that of the QC sample. The positive impact of the CNTs on the corrosion potential and current density was further validated by the potentiodynamic polarization tests in a saline solution. However, these improvements in surface properties came at the cost of a 21.5% reduction in compressive strength, although the compressive strength still remained above 1.1 GPa at 600 °C. The results highlight an interesting trade-off between surface properties and mechanical strength, pointing toward the development of materials suitable for extreme conditions. [ABSTRACT FROM AUTHOR]

Recycled concrete incorporating additional super-absorbent polymer (SAP) and machine-made stone powder (MSP) was prepared using a two-factor, four-level orthogonal test. To enhance the frost resistance of recycled concrete and improve its mechanical properties, such as compressive and flexural strength, the prepared concrete underwent 200 freeze–thaw cycles. Before freeze–thaw cycles, the amount of SAP has a predominant influence on the mechanical properties of recycled concrete in comparison with MSP. After 200 cycles of freeze–thaw, the influence of MSP became more significant than that of SAP. Typically, the compressive strength and flexural strength exhibited a trend of initially increasing and then decreasing as the contents of SAP and MSP increased. The optimized recycled concrete was identified as S16M6, containing 0.16% SAP and 6% MSP, as demonstrated by the minimal strength loss after freeze–thaw cycles. This study also proposed a linear regression model for predicting the mechanical properties which offered valuable guidance for the engineering application of recycled concrete mixed with SAP under the freeze–thaw cycle environment. [ABSTRACT FROM AUTHOR]

Our comprehensive review plunges into the cutting-edge advancements of polymeric microneedle drug delivery systems, underscoring their transformative potential in the realm of transdermal drug administration. Our scrutiny centers on the substrate materials pivotal for microneedle construction and the core properties that dictate their efficacy. We delve into the distinctive interplay between microneedles and dermal layers, underscoring the mechanisms by which this synergy enhances drug absorption and precision targeting. Moreover, we examine the acupoint–target organ–ganglion nexus, an innovative strategy that steers drug concentration to specific targets, offering a paradigm for precision medicine. A thorough analysis of the clinical applications of polymeric microneedle systems is presented, highlighting their adaptability and impact across a spectrum of therapeutic domains. This review also accentuates the systems' promise to bolster patient compliance, attributed to their minimally invasive and painless mode of drug delivery. We present forward-looking strategies aimed at optimizing stimulation sites to amplify therapeutic benefits. The anticipation is set for the introduction of superior biocompatible materials with advanced mechanical properties, customizing microneedles to cater to specialized clinical demands. In parallel, we deliberate on safety strategies aimed at boosting drug loading capacities and solidifying the efficacy of microneedle-based therapeutics. In summation, this review accentuates the pivotal role of polymeric microneedle technology in contemporary healthcare, charting a course for future investigative endeavors and developmental strides within this burgeoning field. [ABSTRACT FROM AUTHOR]

The release of Neogene volcanism in the southeastern part of the Iberian Peninsula produced a series of volcanic structures in the form of stratovolcanoes and calderas; however, other materials also accumulated such as large amounts of pyroclastic materials such as cinerites, ashes, and lapilli, which were later altered to form deposits of zeolites and bentonites. This work has focused on an area located on the northern flank of the San José-Los Escullos zeolite deposit, the only one of its kind with industrial capacity in Spain. The main objective of this research is to characterize the zeolite (SZ) of this new area from the mineral, chemical, and technical points of view and establish its possible use as a natural pozzolan. In the first stage, a study of the mineralogical and chemical composition of the selected samples was carried out using X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray fluorescence (XRF), and thermogravimetric analysis (TGA); in the second stage, chemical-qualitative and pozzolanicity technical tests were carried out at 8 and 15 days. In addition, a chemical analysis was performed using XRF on the specimens of mortars made with a standardized mixture of Portland cement (PC: 75%) and natural zeolite (SZ: 25%) at the ages of 7, 28, and 90 days. The results of the mineralogical analyses indicated that the samples are made up mainly of mordenite and subordinately by smectite, plagioclase, quartz, halloysite, illite, and muscovite. Qualitative chemical assays indicated a high percentage of reactive silica and reactive CaO and also negligible contents of insoluble residues. The results of the pozzolanicity test indicate that all the samples analyzed behave like natural pozzolans of good quality, increasing their pozzolanic reactivity from 8 to 15 days of testing. Chemical analyses of PC/SZ composite mortar specimens showed how a significant part of SiO2 and Al2O3 are released by zeolite while it absorbs a large part of the SO3 contained in the cement. The results presented in this research could be of great practical and scientific importance as they indicate the continuation of zeolitic mineralization beyond the limits of the San José-Los Escullos deposit, which would result in an increase in geological reserves and the extension of the useful life of the deposit, which is of vital importance to the local mining industry. [ABSTRACT FROM AUTHOR]

Silica fume (SF) is an essential component in ultra-high-performance concrete (UHPC) to compact the matrix, but the nucleus effect also causes rapid hydration, which results in high heat release and large shrinkage. In this paper, the carboxylic agents, including polyacrylic acid and polycarboxylate superplasticizer, were used to surface modify SF to adjust the activity to mitigate hydration at an early time and to promote continuous hydration for a long period. The surface and dispersion properties of modified SF (MSF), as well as the strength and pore structure of UHPC, were studied, and the stability of the modification was also investigated. The results demonstrated that, after treatment, the carboxylic groups were grafted on the SF surface, the dispersion of SF was improved due to the increased negative pentanal of the particle surface and the steric hindrance effect, the early hydration was delayed about 3–5 h, and the hydration heat release was also mitigated. The compressive strength of UHPC with MSF reached a maximum of 138.7 MPa at 3 days, which decreased about 3.7% more than the plain group, while flexural strength varied insignificantly. More pores and cracks were observed in the matrix with MSF, and the hydration degree was promoted with MSF addition. The grafted group on SF fell off under an alkali environment after 1 h. [ABSTRACT FROM AUTHOR]

This study presents the feasibility of improving some selected mechanical strengths and the inner-structural analyses of cement matrix by electrospun nanofibers containing nylon 66, nanosilica, and carbon nanotube. The hybrid electrospun nanofibers were fabricated and mixed into ordinary Portland cement. From the mechanical strength test results, the hybrid nanofibers have shown their role in improving the tensile, compressive, and toughness behavior of the mixed cement material. The improvements of 62%, 38%, and 69%, respectively, were observed compared to those of the control paste. The novelty of the surface and inner structure of the hybrid fibers, as well as the modified cement matrix, were observed by the scanned images from electron microscopes. Besides, the additional pozzolanic reaction between the generated calcium hydroxide and the attached silica was clarified thanks to the results of energy dispersive spectroscopy, X-ray diffraction, and thermal gravimetric analysis. Finally, the consistency between mechanical strength results and inner-structure analyses showed the potential of the proposed fiber to improve cement-based materials. [ABSTRACT FROM AUTHOR]

Conductive hydrogels combine the properties of both hydrogels and conductors, making them soft, flexible, and biocompatible. These properties enable them to conform to irregular surfaces, stretch and bend without losing their electrical conductivity, and interface with biological systems. Conductive hydrogels can be utilized as conductive traces, electrodes, or as a matrix for flexible electronics. Exciting applications in sensors, tissue engineering, and human-machine interaction have been demonstrated worldwide. This review comprehensively covers the progress in this field, focusing on several main aspects: functional materials, performance improvement strategies, and wearable applications in human-related areas. Furthermore, the major approaches and challenges for improving their mechanical properties, conductivity, and long-term stability are systematically summarized. [ABSTRACT FROM AUTHOR]

Rubberized cement-based materials are widely utilized because of their good ductility, impact resistance, and fatigue resistance. This research investigated the effect of the rubber aggregates content, particle size of rubber aggregates, and water–cement ratio on the early-age mechanical properties and deformation behaviors of mortar through laboratory tests, and strength reduction coefficient fitting models were established according to the testing results. The results show that the compressive strength growth rate of cement mortar is about 15% slower than that of flexural strength. The existence of rubber aggregates lowers the strength increase rate of mortar. The reduction coefficient of strength decreases with increasing rubber aggregates content and increases with the age of mortar. Increasing rubber aggregates content and decreasing particle size of rubber aggregate can lower the autogenous shrinkage in the initial stage, but the autogenous shrinkage of the later stage increases as the rubber aggregates content increases, with a turning point between 30 h and 50 h. After 3 days, the dry shrinkage of mortar accounts for about 70–80% of the total shrinkage, and it increases with higher rubber aggregate content, smaller particle size of rubber aggregates, and higher water–cement ratios. [ABSTRACT FROM AUTHOR]

Reliability analysis of mechanical strength could be used for evaluation of wood scrimber properties in this study. Normal, lognormal, and Weibull distributions were used to determine and selected the optimal model for wood scrimber for the first time. The results of reliability analysis indicated that the bending and tensile strength were well fit for normal distribution. Weibull distribution could describe the probability distribution law of compression strength, and lognormal distribution could reflect the probability distribution law of shear strength, respectively. The standard value of each mechanical strength was determined and compared in accordance with two methods. This illustrated that a significant difference between these two methods is evident in the case of modulus of elasticity (MOE), compression strength (CS), and shear strength (SS), while modulus of rupture (MOR) and tensile strength (TS) yielded similar data. The improvement in mechanical strengths was remarkably affected by the increase in density. Moreover, the microstructure of wood scrimber has a good ratio of deformation with respect to density, which can be significantly explained by compressive densification. The results suggest that the deformation ratio increased from 49.75% to 78.67%, which might reflect the variation in macroscopic mechanical strength of wood scrimber. [ABSTRACT FROM AUTHOR]

In this study, Poly(vinyl alcohol)/cellulose nanofiber (PVA/CNF) hydrogels have been successfully prepared using γ-ray irradiation, annealing, and rehydration processes. In addition, the effects of CNF content and annealing methods on the hydrogel properties, including gel fraction, micromorphology, crystallinity, swelling behavior, and tensile and friction properties, are investigated. Consequently, the results show that at an absorbed dose of 30 kGy, the increase in CNF content increases the gel fraction, tensile strength, and elongation at break of irradiated PVA/CNF hydrogels, but decreases the water absorption. In addition, the cross-linking density of the PVA/CNF hydrogels is significantly increased at an annealing temperature of 80 °C, which leads to the transition of the cross-sectional micromorphology from porous networks to smooth planes. For the PVA/CNF hydrogel with a CNF content of 0.6%, the crystallinity increases from 19.9% to 25.8% after tensile annealing of 30% compared to the original composite hydrogel. The tensile strength is substantially increased from 65.5 kPa to 21.2 MPa, and the modulus of elasticity reaches 4.2 MPa. Furthermore, it shows an extremely low coefficient of friction (0.075), which suggests that it has the potential to be applied as a material for artificial joint cartilage. [ABSTRACT FROM AUTHOR]

Low-cost and high-performance materials or techniques that could synergistically remove phenanthrene (PHE) in a simple manner were highly desired. Herein, we reported an alkali-activated slag (AAS) that proved applicable in both construction and environmental protection efforts. AAS was synthesized by mixing ground granulated blast furnace slag (GGBFS) and an alkaline solution. The prepared AAS mortar achieved the highest mechanical strength when using an alkaline activator with a Na2O concentration of 8% by slag weight. Moreover, AAS exhibited excellent sorption performance towards PHE, with the highest sorption performance reaching 44.0 mg/g, which was much higher than that of GGBFS. Sorption of PHE reached equilibrium within approximately 120 h and fit well with the pseudo-second-order model. Furthermore, the primary sorption mechanisms for PHE on AAS were attributed to cation-π interactions, hydrogen bonding, and flocculation. The strategy of using AAS not only met the requirements for high-performance and low-cost materials but also addressed the challenging issues of developing an all-in-one treatment for PHE pollutants, which was of great significance to wastewater purification. [ABSTRACT FROM AUTHOR]

The intricate composition of wastewater impedes the recycling of agricultural and industrial effluents. This study aims to investigate the potential of sisal leaf wastewater (SLW), both water-treated (WTSLW) and alkali-treated (ATSLW), as a substitute for the alkali activator (NaOH solution) in the production of slag-powder- and fly-ash-based composites, with a focus on the effects of WTSLW substitution ratios and sisal leaf soaking durations. Initially, the fresh properties were assessed including electrical conductivity and fluidity. A further analysis was conducted on the influence of both WTSLW and ATSLW on drying shrinkage, density, and mechanical strength, including flexural and compressive measures. Microstructural features were characterized using SEM and CT imaging, while XRD patterns and FTIR spectra were employed to dissect the influence of WTSLW substitution on the composite's products. The results show that incorporating 14 wt% WTSLW into the composite enhances 90-day flexural and compressive strengths by 34.8% and 13.2%, respectively, while WTSLW curtails drying shrinkage. Conversely, ATSLW increases porosity and decreases density. Organic constituents in both WTSLW and ATSLW encapsulated in the alkaline matrix fail to modify the composites' chemical composition. These outcomes underscore the potential for sustainable construction materials through the integrated recycling of plant wastewater and solid by-products. [ABSTRACT FROM AUTHOR]

As one of the raw materials of basic magnesium sulfate cement (BMSC), the activity of light-burned magnesium oxide (MgO) has an important effect on the hydration rate, hydration products, and mechanical properties of BMSC. To reveal the influence of packaging method, storage environment, and storage time on the activity of MgO and the mechanical properties of BMSC, an experiment was conducted by using ordinary woven bags, peritoneal woven bags, and plastic and paper compound bags to store the finished BMSC and the raw materials (light-burned MgO, MgSO4·7H2O, fly ash, and a chemical additive) under the conditions of natural environment, sealed environment, and wet environment, respectively. Comparative analysis of the effects of packaging method, storage conditions, and storage time on the activity of MgO and the mechanical properties of BMSC was performed through the mechanical strength test of mortar specimens. The results showed that in a sealed environment, the loss of a-MgO content in light-burned MgO was minimized, which was more conducive to keeping the mechanical properties of BMSC stable. In the wet environment, the mechanical strength of BMSC was significantly reduced in the early stage (1 day) due to the significant reduction in the activity of MgO, and the mechanical strength of the finished BMSC and prepared BMSC after 120 days of storage was still lost, regardless of the packaging method. However, the storage environment and packaging method had relatively little effect on the late mechanical strength (28 days) of BMSC. It is advisable to use ordinary woven bags for packaging in natural and sealed environments as this is more economical for engineering applications. Plastic and paper compound bags are superior to ordinary woven bags and peritoneal woven bags in wet environments. [ABSTRACT FROM AUTHOR]

In this paper, a new method involving a wear-resistant and reusable template is proposed for the preparation of high-mechanical-strength superhydrophobic polymer film based on wire electrical discharge machining (WEDM). A solid−liquid-contact-angle simulation model was established to obtain surface-texture types and sizes that may achieve superhydrophobicity. The experimental results from template preparation show that there is good agreement between the simulation and experimental results for the contact angle. The maximum contact angle on the template can reach 155.3° given the appropriate triangular surface texture and WEDM rough machining. Besides, the prepared superhydrophobic template exhibits good wear resistance and reusability. PDMS superhydrophobic polymer films were prepared by the template method, and their properties were tested. The experimental results from the preparation of superhydrophobic polymer films show that the maximum contact angle of the polymer films can be up to 154.8° and that these films have good self-cleaning and anti-icing properties, wear resistance, bending resistance, and ductility. [ABSTRACT FROM AUTHOR]

In this study, the effects of the δ phase and annealing twins on the hardness, tensile properties, and Charpy impact toughness of Inconel 718 fabricated using L-PBF were investigated. The as-printed components underwent two stages of heat treatment to modify their microstructure and phases. The δ phase was induced through solid-solution heat treatment at 980 °C for 1 h, while annealing twins were formed at 1100 °C for 3 h. Following precipitation hardening, specimens containing δ precipitates exhibited a higher ultimate tensile strength (13%), yield strength (27%), and hardness (12%) compared to those rich in annealing twins. The enhanced mechanical strength was attributed to the presence of δ precipitates and differences in the extent of recrystallization, leading to variations in the density of retained lattice defects, including subgrain boundaries and primary phases. Conversely, specimens with annealing twins demonstrated a significantly higher impact toughness (four times) and ductility (twice) than those with δ precipitates. Annealing twins were found to enhance plasticity by impeding dislocation movement, while δ precipitates reduced plasticity by acting as sites for void formation and crack propagation. Microstructural, compositional, phase, crystallographic, and fractographic analyses were conducted using OM, SEM, TEM, and XRD techniques to identify the factors influencing the observed differences. The results indicate that the heat treatment approach involving annealing twins can effectively enhance the ductility of Inconel 718 while maintaining the necessary mechanical strength. [ABSTRACT FROM AUTHOR]

Mandibular reconstructive surgery is necessary for large bone defects. Although various reconstruction methods have been performed clinically, there is no mandibular reconstruction method that meets both sufficient strength criteria and the patient's specific morphology. In this study, the material strength of the cylindrical lattice structures formed by electron-beam melting additive manufacturing using titanium alloy powder was investigated for mandibular reconstruction. The virtual strengths of 28 lattice structures were compared using numerical material tests with finite element method software. Subsequently, to compare the material properties of the selected structures from the preliminary tests, compression test, static bending test and fatigue test were conducted. The results showed that there were correlations with relative density and significant differences among the various structures when comparing internal stress with deformation, although there was a possibility of localized stress concentration and non-uniform stress distribution based on the lattice structure characteristics. These results suggest that the lattice structure of body diagonals with nodes and a cell size of 3.0 mm is a potential candidate for metallic artificial mandibles in mandibular reconstruction surgery. [ABSTRACT FROM AUTHOR]

Fibers crystallize and become brittle at high temperatures for a long time, so the surface coating must maintain long-lasting emission performance, which requires superior antioxidant properties of the high-emissivity fillers. To improve the radiation performance of the coating and the tensile strength of the fiber fabric, a double-layer coating with high emissivity was prepared on the surface of flexible aluminum silicate fiber fabric (ASFF) using MoSi2 and SiC as emissive agents. The incorporation of borosilicate glass into the outer coating during high-temperature oxidation of ZrB2 results in superior encapsulation of emitter particles, effectively filling the pores of the coating and significantly reducing the oxidation rate of MoSi2 and SiC. Furthermore, the addition of an intermediate ZrO2 layer enhances the fiber bundle's toughness. The obtained double-coated ASFF exhibits an exceptionally high tensile strength of 57.6 MPa and a high bond strength of 156.2 kPa. After being subjected to a 3 h heating process, the emissivity exhibits a minimal decrease of only 0.032, while still maintaining a high value above 0.9. The thermal insulation composites, consisting of a flexible ASFF matrix and a ZrB2-modified double-layer coating, exhibit significant potential for broad applications in the field of thermal protection. [ABSTRACT FROM AUTHOR]

Nickel–chromium–molybdenum Alloy 625 exhibits an excellent combination of mechanical properties and corrosion resistance. However, the high-temperature plastic deformation process and the heat treatment represent critical aspects for the loss in mechanical strength by grain coarsening. This detrimental behavior is worsened by the absence of phase transformation temperatures. However, the chemical composition permits slow precipitation-hardening response upon single aging. Therefore, when the soft- or solution-annealed condition is associated with insufficient mechanical properties, this potentiality can be exploited to improve the mechanical strength. Since the γ ″ precipitation can be accelerated by double-aging treatment, different time–temperature combinations of double aging at 732 °C and 621 °C are investigated. The simultaneous precipitation of intergranular carbides can dramatically affect the corrosion resistance. Such an undesired phenomenon occurs very quickly at 732 °C, but it is obtained only after very long exposure times at 621 °C. For this reason, a performance chart is developed to compare all the tested conditions. In particular, single aging at 621 °C for 72 h and 130 h are associated with an acceptable combination of mechanical and corrosion properties. Double aging permits a conspicuous acceleration of the aging response. For instance, with double aging at 732 °C 3 h and 621 °C 72 h, it is possible to obtain the same mechanical properties of single aging at 621 °C for 260 h. Such acceleration is accompanied by a more critical corrosion behavior, especially because of the primary step. However, even after its optimization, none of the tested conditions were acceptable. [ABSTRACT FROM AUTHOR]

Autologous-engineered artificial tissues constitute an ideal alternative for radical surgery in terms of natural anticoagulation, self-repair, tissue regeneration, and the possibility of growth. Previously, we focused on the development and practical application of artificial tissues using "in-body tissue architecture (iBTA)", a technique that uses living bodies as bioreactors. This study aimed to further develop iBTA by fabricating tissues with diverse shapes and evaluating their physical properties. Although the breaking strength increased with tissue thickness, the nominal breaking stress increased with thinner tissues. By carving narrow grooves on the outer periphery of an inner core with narrow grooves, we fabricated approximately 2.2 m long cord-shaped tissues and net-shaped tissues with various designs. By assembling the two inner cores inside the branched stainless-steel pipes, a large graft with branching was successfully fabricated, and its aortic arch replacement was conducted in a donor goat without causing damage. In conclusion, by applying iBTA technology, we have made it possible, for the first time, to create tissues of various shapes and designs that are difficult using existing tissue-engineering techniques. Thicker iBTA-induced tissues exhibited higher rupture strength; however, rupture stress was inversely proportional to thickness. These findings broaden the range of iBTA-induced tissue applications. [ABSTRACT FROM AUTHOR]

The high demand for lithium (Li) relates to clean, renewable storage devices and the advent of electric vehicles (EVs). The extraction of Li ions from aqueous media calls for efficient adsorbent materials with various characteristics, such as good adsorption capacity, good selectivity, easy isolation of the Li-loaded adsorbents, and good recovery of the adsorbed Li ions. The widespread use of metal-based adsorbent materials for Li ions extraction relates to various factors: (i) the ease of preparation via inexpensive and facile templation techniques, (ii) excellent selectivity for Li ions in a matrix, (iii) high recovery of the adsorbed ions, and (iv) good cycling performance of the adsorbents. However, the use of nano-sized metal-based Lithium-ion sieves (LISs) is limited due to challenges associated with isolating the loaded adsorbent material from the aqueous media. The adsorbent granulation process employing various binding agents (e.g., biopolymers, synthetic polymers, and inorganic materials) affords composite functional particles with modified morphological and surface properties that support easy isolation from the aqueous phase upon adsorption of Li ions. Biomaterials (e.g., chitosan, cellulose, alginate, and agar) are of particular interest because their structural diversity renders them amenable to coordination interactions with metal-based LISs to form three-dimensional bio-composite materials. The current review highlights recent progress in the use of biopolymer binding agents for the granulation of metal-based LISs, along with various crosslinking strategies employed to improve the mechanical stability of the granules. The study reviews the effects of granulation and crosslinking on adsorption capacity, selectivity, isolation, recovery, cycling performance, and the stability of the LISs. Adsorbent granulation using biopolymer binders has been reported to modify the uptake properties of the resulting composite materials to varying degrees in accordance with the surface and textural properties of the binding agent. The review further highlights the importance of granulation and crosslinking for improving the extraction process of Li ions from aqueous media. This review contributes to manifold areas related to industrial application of LISs, as follows: (1) to highlight recent progress in the granulation and crosslinking of metal-based adsorbents for Li ions recovery, (2) to highlight the advantages, challenges, and knowledge gaps of using biopolymer-based binders for granulation of LISs, and finally, (3) to catalyze further research interest into the use of biopolymer binders and various crosslinking strategies to engineer functional composite materials for application in Li extraction industry. Properly engineered extractants for Li ions are expected to offer various cost benefits in terms of capital expenditure, percent Li recovery, and reduced environmental footprint. [ABSTRACT FROM AUTHOR]

The current paper reports on the quantification of the effect of magnetic fields on the mechanical performance of ferromagnetic nanocomposites in situ during basic standard tensile testing. The research investigates altering the basic mechanical properties (modulus and strength) via the application of a contact-less magnetic field as a primary attempt for a future composites strengthening mechanism. The nanocomposite specimens were fabricated using filament-based 3D printing and were comprised of ferromagnetic nanoparticle-embedded thermoplastic polymers. The nanoparticles were iron particles dispersed at 21 wt.% (10.2 Vol.%) inside a polylactic acid (PLA) polymer, characterised utilising optical microscopy and 3D X-ray computed tomography. The magnetic field was stationary and produced using permanent neodymium round-shaped magnets available at two field strengths below 1 Tesla. The 3D printing was a MakerBot Replicator machine operating based upon a fused deposition method, which utilised 1.75 mm-diameter filaments made of iron particle-based PLA composites. The magnetic field-equipped tensile tests were accompanied by a real-time digital image correlation technique for localized strain measurements across the specimens at a 10-micron pixel resolution. It was observed that the lateral magnetic field induces a slight Poisson effect on the development of extrinsic strain across the length of the tensile specimens. However, the effect reasonably interferes with the evolution of strain fields via the introduction of localised compressive strains attributed to accumulated magnetic polarisation at the magnetic particles on an extrinsic scale. The theory overestimated the moduli by a factor of approximately 3.1. To enhance the accuracy of its solutions for 3D-printed specimens, it is necessary to incorporate pore considerations into the theoretical derivations. Additionally, a modest 10% increase in ultimate tensile strength was observed during tensile loading. This finding suggests that field-assisted strengthening can be effective for as-received 3D-printed magnetic composites in their solidified state, provided that the material and field are optimally designed and implemented. This approach could propose a viable method for remote field tailoring to strengthen the material by mitigating defects induced during the 3D printing process. [ABSTRACT FROM AUTHOR]

Bi1−xSbx crystal is one of the best n-type thermoelectric materials below 200 K, but its weak mechanical strength hinders practical applications for deep refrigeration. Herein, we adopted the mechanical enhancement method of hot extrusion to investigate the comprehensive mechanical and thermoelectric properties of Bi0.905Sb0.095. It revealed that reducing the grain size of the matrix and increasing the extrusion ratio can improve the gain size uniformity and mechanical properties. Meanwhile, the thermoelectric performance depends on the texture, grain size, and local composition. The extruded sample prepared by ingot with the high extrusion ratio of 9:1 generated uniform small grains, which resulted in the high bending strength of Bi1−xSbx~130 Mpa and a high power factor of ~68 μW·cm−1·K−2@173 K, as well as the relatively high figure of merit of 0.25@173K. This work highlights the importance of the uniform distribution of the grain size and the compositions for Bi1−xSbx, as well as the required universal key parameter for the hot extrusion method. [ABSTRACT FROM AUTHOR]

To improve the performance of shotcrete in high-altitude and low-temperature environments, emulsified asphalt shotcrete (EASC), which can be used in negative-temperature environments, was prepared by using low-freezing-point emulsified asphalt, calcium aluminate cement, and sodium pyrophosphate as modified materials. The effect of emulsified asphalt on the performance of shotcrete was investigated through concrete spraying and indoor tests. Then, the modification mechanism of emulsified asphalt with respect to EASC was analyzed by combining scanning electron microscopy images and the pore structure characteristics of EASC. The results showed that in a negative-temperature environment, the incorporation of emulsified asphalt delayed the formation of the peak of the cement hydration exotherm, slowed the rate of the cement hydration exotherm, reduced the thermal perturbation of permafrost by EASC, increased the cohesion of the concrete, improved the bond strength between EASC and permafrost, and reduced the rate of rebound. The mechanical strength of the studied EASC decreased upon increasing the amount of emulsified asphalt in the admixture, and its resistance to cracking gradually improved. A content of less than 5% emulsified asphalt could improve the internal pore structure of EASC, thus improving its durability. Increasing the content of emulsified asphalt affected the hydration process of the cement, and the volume content of the capillary pores and macropores increased, which reduced the durability of the EASC. [ABSTRACT FROM AUTHOR]

Over the last 20 years, flue gas desulfurization gypsum (FGD gypsum) has become a valuable and widely used substitute for a natural raw material to produce plasters, mortars, and many other construction products. The essential advantages of FGD gypsum include its high purity and stability, which allow for better technical parameters compared to natural gypsum, and, until recently, its low price and easy availability. This FGD gypsum is obtained in the process of desulfurization of flue gases and waste gases in power plants, thermal power plants, refineries, etc., using fossil fuels such as coal or oil. The gradual reduction in energy production from fossil raw materials implemented by European Union countries until its complete cessation in 2049 in favor of renewable energy sources significantly affects the availability of synthetic gypsum, and forces producers of mortars and other construction products to look for new solutions. The gypsum content in commonly used light plaster mortars is usually from 50 to 60% by mass. This work presents the results of tests on mortars wherein the authors reduced the amount of gypsum to 30%, and, to meet the strength requirements specified in the EN 13279-1:2008 standard, added Portland cement in the amount of 6–12% by mass. Such a significant reduction in the content of synthetic gypsum will reduce this raw material's consumption, thus extending its availability and developing other solutions. The study presented the test results on strength, density, porosity, pore size distribution, and changes in the microstructure of mortars during up to 180 days of maturation in conditions of increased relative humidity. The results show that decreased porosity and increased mechanical strength occur due to the densification of the microstructure caused by the formation of hydration products, such as C-S-H, ettringite, and thaumasite. [ABSTRACT FROM AUTHOR]

In this article, ABA triblock copolymer (tri-BCP) thermoplastic elastomers with poly(ethylene oxide) (PEO) middle block and polyzwitterionic poly(4-vinylpyridine) propane-1-sulfonate (PVPS) outer blocks were synthesized. The PVPS-b-PEO-b-PVPS tri-BCPs were doped with lithium bis-(trifluoromethane-sulfonyl) imide (LiTFSI) and used as solid polyelectrolytes (SPEs). The thermal properties and microphase separation behavior of the tri-BCP/LiTFSI hybrids were studied. Small-angle X-ray scattering (SAXS) results revealed that all tri-BCPs formed asymmetric lamellar structures in the range of PVPS volume fractions from 12.9% to 26.1%. The microphase separation strength was enhanced with increasing the PVPS fraction (fPVPS) but was weakened as the doping ratio increased, which affected the thermal properties of the hybrids, such as melting temperature and glass transition temperature, to some extent. As compared with the PEO/LiTFSI hybrids, the PVPS-b-PEO-b-PVPS/LiTFSI hybrids could achieve both higher modulus and higher ionic conductivity, which were attributed to the physical crosslinking and the assistance in dissociation of Li+ ions by the PVPS blocks, respectively. On the basis of excellent electrical and mechanical performances, the PVPS-b-PEO-b-PVPS/LiTFSI hybrids can potentially be used as solid electrolytes in lithium-ion batteries. [ABSTRACT FROM AUTHOR]

Hydrogels with high hydrophilicity and excellent biocompatibility have been considered as potential candidates for various applications, including biomimetics, sensors and wearable devices. However, their high water content will lead to poor load-bearing and high friction. Currently, two-dimensional (2D) materials have been widely investigated as promising nanofillers to improve the mechanical and lubrication performances of hydrogels because of their unique physical–chemical properties. On one hand, 2D materials can participate in the cross-linking of hydrogels, leading to enhanced load-bearing capacity and fatigue resistance, etc.; on the other hand, using 2D materials as nanofillers also brings unique biomedical properties. The combination of hydrogels and 2D materials shows bright prospects for bioapplications. This review focusses on the recent development of high-strength and low-friction hydrogels with the addition of 2D nanomaterials. Functional properties and the underlying mechanisms of 2D nanomaterials are firstly overviewed. Subsequently, the mechanical and friction properties of hydrogels with 2D nanomaterials including graphene oxide, black phosphorus, MXenes, boron nitride, and others are summarized in detail. Finally, the current challenges and potential applications of using 2D nanomaterials in hydrogel, as well as future research, are also discussed. [ABSTRACT FROM AUTHOR]

France is Europe's leading producer of flaxseed. This seed is rich in omega-3, energy, and protein for animals, but it also contains anti-nutritional factors such as mucilage. Thus, mucilage must be removed and could be used as a bio-admixture in cementitious materials development, reducing the environmental impact of cementitious materials. This study aims to valorize the usage of flaxseed mucilage (FM) in ordinary Portland cement. FM caused macroscopic and microscopic changes in the materials studied. The higher the concentration, the greater the changes were. The admixed samples showed an exponentially concentration-dependent delay in setting. FM degradation products induced by the cementitious conditions accentuated the delay. However, this delay in setting did not affect the hydrates' growth in the material. In fact, FM showed a "delay accelerator" behavior, meaning that once hydration began, it was accelerated as compared to a reference. Macroscopically, FM induced significant flocculation, increasing material porosity and carbonation. Consequently, bulk density and thermal conductivity were reduced. At the highest amount of FM admixture (0.75% w/w), FM allowed bridge formation between Ca(OH)2 crystals, which can improve the mechanical properties of mortars. Because FM is highly hygroscopic, it has the capability to absorb water and subsequently release it gradually and under controlled conditions into the cement matrix. Therefore, regulation of water diffusion from the mucilage may induce the self-healing properties responsible for mechanical properties similar to that of the reference in the medium to long term. [ABSTRACT FROM AUTHOR]

In this investigation, coral sand is presented as a sustainable substitute for conventional river and machine-manufactured sand. This study comprehensively investigated the macro-scale strength, deformation, and permeability characteristics of coral sand, alongside analyzing the mechanical behavior, deformation, and permeability under various conditions and in relation to distinct particle characteristics. It revealed that coral sand primarily consists of biotite and high-Mg calcite, featuring abundant internal pore space. Its compressive properties resemble clayey soils, displaying minimal unloading rebound and predominant plastic deformation during compression. In direct shear tests, the stress–strain relationship follows an approximate hyperbola, with no pronounced strain softening. Describing particle fragmentation in the process proves challenging, making indicators like internal friction angle less applicable in engineering. Triaxial tests indicate a rapid initial bias stress increase, followed by a gradual decrease post-stress peak, suggesting a strain softening phenomenon. As surrounding pressure rises, the axial strain needed to reach peak strength also increases. The permeability coefficient of coral sand correlates linearly with pore ratio increase, represented by 10e. The complex interaction of multiple factors influences the strength, deformation, and permeability of coral sand blown fill mixes, with specimen porosity having the greatest impact. The design and construction of high-weight foundation elements in coral sand blown fill projects should consider porosity effects. [ABSTRACT FROM AUTHOR]

The recycling of construction and demolition waste (CDW) for the extraction of recycled concrete aggregates (RCAs) to be used to produce recycled aggregate concrete (RAC) is widely acknowledged internationally. However, CDW not only contains concrete debris but may also contain burnt clay bricks. The recycling of such CDW without the segregation of different components would result in recycled aggregates having different proportions of concrete and brick aggregates. The utilization of these aggregates in concrete requires a detailed investigation of their mechanical and durability properties. In this regard, the present study focused on investigating the mechanical and durability properties of hybrid recycled aggregate concrete (HRAC) made by the 100% replacing of natural aggregates with recycled brick (RBAs) and RCA in hybrid form. The partial replacement of cement with fly ash was also considered to reduce the corban footprint of concrete. An extensive experimental program was designed and carried out in two phases. In the first phase, a total of 48 concrete mixes containing coarse RBA and RCA in mono and hybrid forms were prepared and tested for their compressive strength. The test results indicated that the compressive strength of HRAC is greatly affected by the proportion of coarse RBA and RCA. In the second phase, based on the results of the first phase, eight concrete mixes with the most critical proportions of RBA and RCA in hybrid form were selected to evaluate their mechanical and durability performance. In addition, four mixes with natural aggregates were also prepared for comparison purposes. To evaluate the mechanical properties of the concrete mixes, compressive strength and modulus of rupture (MOR) tests were performed, while for the evaluation of durability properties, water absorption and behavior after exposure to aggressive conditions of acidic and brine solutions were studied. The results revealed that a 20% replacement of cement with fly ash resulted in acceptable mechanical and durability properties of HRAC intended to be used for making concrete bricks or pavers. [ABSTRACT FROM AUTHOR]

In this study, silver birch (Betula pendula) and Scots pine (Pinus sylvestris) wood planks (1000 × 100 × 25 mm) were thermally modified in pilot-scale equipment. Research extended our knowledge of the thermal modification (TM) process in a closed system under nitrogen pressure, as well as how process parameters affect the chemical composition and mechanical strength of wood. Various TM regimes were selected—maximum temperature (150–180 °C), modification time (30–180 min), and initial nitrogen pressure (3–6 bar). Chemical analyses were performed to assess the amount of extractives, lignin, polysaccharides and acetyl group content following the TM process. The mechanical properties of TM wood were characterized using the modulus of rupture (MOR), modulus of elasticity (MOE), and Brinell hardness. The MOR of both studied wood species following TM in nitrogen was reduced, but MOE changes were insignificant. The Brinell hardness of TM birch wood's tangential surface was much higher than that of the radial surface, although Scots pine wood showed the opposite pattern. TM birch and pine wood specimens with the highest mass loss, acetone soluble extractive amount, and the lowest xylan and acetyl group content had the lowest MOR and Brinell hardness. [ABSTRACT FROM AUTHOR]

In the view of the recycling and upscaling processes of waste materials, three different precursors, namely metakaolin, fly ash and volcanic ash, were mixed with Na- or K-silicate to produce binders aimed for the synthesis of geopolymer mortars based on construction and demolition wastes (CDWs). These later, used as aggregates in amount of 50 wt.%, were sampled in two geologically different Italian areas. A comparative study was carried out through a multidisciplinary approach using mineralogical–chemical analyses and physical–mechanical tests for the characterization of six binders and twelve mortars. The aim was to verify the effects of CDW interactions on binders as well as the extent of their compositional influences on the final properties. The chemical and mineralogical results evidenced strong compositional differences among the CDWs, differently influencing the physical–mechanical performances (i.e., compressive strength, density, water absorption and porosity) of the mortar samples. Regardless of the types of precursors and CDWs used, a better influence of K-silicate than sodium on the synthetised samples was observed. Furthermore, the higher versatility of metakaolin mortars with any type of CDW used was noted. Contrary, fly ash and volcanic ash mortars showed better properties with CDWs based on their high silica content and volcanic minerals. The study highlighted the critical roles of the CDW composition and precursor selection in mortar production. It confirmed that CDWs can be recycled for geopolymeric synthesis through proper characterisation and binder selection. Optimising these parameters allows for the successful integration of CDWs into geopolymeric materials. This process supports the advancement of a circular economy in the construction industry. [ABSTRACT FROM AUTHOR]

Due to the high prices, the popularity of radiation shielding concrete (RSC) has been greatly limited. To solve this, this research reused the lead–zinc tailings (LZT) as a fine aggregate replacement ranging from 0% to 60% for the RSC. The results revealed that the RSC containing 30% LZT presented better workability and achieved 95.84% of the compressive strength and 98.49% of the linear attenuation coefficient of the RSC, and reached the highest splitting tensile strength values, which increased by 4.43%. Meanwhile, after the heat treatments, there were favorable correlations between the relative velocity and relative strength, as well as between the damage index and the relative linear attenuation coefficient, which could accurately reflect the degradation of not only the mechanical but also the shielding properties. Considering the temperature and shielding thickness, the reuse of LZT can bring considerable economic and environmental benefits. [ABSTRACT FROM AUTHOR]

With the increasing demand for lighter, more environmentally friendly, and affordable solutions in the mobility sector, designers and engineers are actively promoting the use of innovative integral dissimilar structures. In this field, friction stir-based technologies offer unique advantages compared with conventional joining technologies, such as mechanical fastening and adhesive bonding, which recently demonstrated promising results. In this study, an aluminum alloy and a glass fiber-reinforced polymer were friction stir joined in an overlap configuration. To assess the main effects, interactions, and influence of processing parameters on the mechanical strength and processing temperature of the fabricated joints, a full factorial design study with three factors and two levels was carried out. The design of experiments resulted in statistical models with excellent fit to the experimental data, enabling a thorough understanding of the influence of rotational speed, travel speed, and tool tilt angle on dissimilar metal-to-polymer friction stir composite joints. The mechanical strength of the composite joints ranged from 1708.1 ± 45.5 N to 3414.2 ± 317.1, while the processing temperature was between 203.6 ± 10.7 °C and 251.5 ± 9.7. [ABSTRACT FROM AUTHOR]

The inherent characteristics of cellulose-derived aerogels, such as their natural abundance and environmental friendliness, make them highly interesting. However, its significant shrinkage before and after the supercritical drying procedure and low mechanical strength limit its potential application. Here, we propose a strategy to prepare cellulose diacetate aerogels (CDAAs) with low drying shrinkage, exceptional thermal insulation, and superior mechanical strength. The low drying shrinkage (radial drying shrinkage of 1.4%) of CDAAs is attributed to their relative strong networking skeletons, which are greatly formed by tert-butanol solvent exchange in exerting the interaction of reducing the surface tension force. In this case, CDAAs are eventually endowed with the low bulk density of 0.069 g cm−3 as well. Additionally, as-prepared CDAAs possess an abundant three-dimensional networking structure whose pore size is concentrated in the diameter range of ~50 nm, and the result above is beneficial for improving the thermal insulation performance (thermal conductivity of 0.021 W m−1 K−1 at ambient environmental and pressure conditions). On the other hand, the optimal compressive stresses of CDAAs at 3% and 5% strain are 0.22 and 0.27 MPa respectively, indicating a mechanically well robustness. The above evidence demonstrates indeed the exceptional thermal insulation and superior compressive properties of CDAAs. This work may provide a new solution for developing a kind of high-performance cellulose-derived aerogel in the future. [ABSTRACT FROM AUTHOR]

Ignimbrite rock is a volcanic material located in the Arequipa region (Peru), and for centuries, it has been used as a construction material, giving a characteristic light pastel, white to pink color to the city of Arequipa, with white being the most common. In the present study, the potential use of three types of Arequipa raw materials (ignimbrite rock powder, calcined clay powder, and demolition mortar powder) as the main source of new binders or the manufacture of environmentally friendly mortars, without the addition of ordinary Portland cement (OPC) is discussed. In this work, an in-depth characterization of the materials used was carried out. The proposed fabrication route for geopolymeric materials was considered for the manufacture of binders and mortars using an alkaline solution of NaOH with values between 12 and 18 molar, as a trigger for the geopolymerization process. Geopolymeric mortars were obtained by adding a controlled amount of fine sand to the previously prepared mixture of binder raw material and an alkaline solution. Conventional OPC and geopolymeric mortars manufactured under the same conditions were mechanically evaluated by uniaxial compression tests at a constant compression rate of 0.05 mm/min and under normal conditions of temperature and atmosphere, where the most optimal values were obtained for 15 molar alkaline solutions of ignimbrite without the addition of aggregates, with values of compressive strength of 42 MPa and a modulus elastic of 30 GPa. The results revealed a significant increase in the maximum strength and modulus of elasticity values when the volumetric fractions of OPC are completely replaced with geopolymeric binders in the study conditions of this work, demonstrating the enormous potential of the ignimbrite rock and construction waste studied, as raw material of alternative mortar binders without the addition of OPC. With this work, the ignimbrite rock, of great value in the region and also found in other areas of the Earth's geography, was characterized and valued, in addition to the calcined clay and demolition mortar of the region. [ABSTRACT FROM AUTHOR]

This study explores the impact of silica nanoparticles on jute fiber-reinforced composites with epoxy resin matrices. Silica nanoparticles were synthesized at three concentrations (3%, 6%, and 9%) and incorporated into composites at varying fiber–resin weight ratios. The composites were subjected to tests for tensile strength, flexural strength, impact strength, and hardness. The Taguchi signal-to-noise ratio method was employed for optimization. Results indicate that a 9% addition of silica nanoparticles significantly enhances the mechanical properties of jute fiber-reinforced composites. Tensile and flexural strength increased with higher silica nanoparticle content, while impact strength and hardness also improved. Notably, a 9% silica addition achieved a maximum tensile strength of 72 MPa, resulting in a 10% increase over that yielded by the 3% addition. Flexural and impact strengths improved by 23% and 20%, respectively, when compared to the 3% silica addition. Furthermore, a neural network model accurately predicted the composite's mechanical characteristics with 100% accuracy. These findings hold promise for the automobile and aircraft industries, as they require high-performance materials. The integration of jute fibers and silica nanoparticles into composites offers a sustainable and eco-friendly alternative to conventional materials. The enhancement strategy employed in this analysis can be applied to enhance the mechanical properties of other composite materials. [ABSTRACT FROM AUTHOR]

In 2021, approximately 4.1 billion tonnes of cement were globally produced and the annual CO2 emissions from cement plants reached almost 2.8 billion metric tonnes. In recent years, many efforts have been made to manufacture low-CO2 cements. In this regard, great consideration has been given towards calcium sulfoaluminate (CSA) binders for both their technical features and sustainable properties, principally connected to their industrial process. The use of blended cements composed by CSA binders and supplementary cementitious materials (SCMS) can be an effective way to (a) reduce the CO2 footprint and (b) produce greener binders. This scientific work studied the utilization of different amounts (15–35 wt%) of calcined reservoir sediments (RS) as SCMS in blended CSA binders, where the binders were cured for up to 56 days and characterised by various analytical techniques. It was found that thermally treated RS were particularly noteworthy as their utilization allowed for a dilution of the CSA clinker, thus implying a decrease in CO2 emissions and a reduction in costs related to their production. However, compared to a plain CSA cement, the blended systems showed rather similar volume stability levels, whilst their compressive strength and porosity values were, respectively, lower and higher at all the investigated aging periods. [ABSTRACT FROM AUTHOR]

Laser processing is an efficient method for fabricating a superhydrophobic surface and has attracted much attention due to its multifunctionality. However, excessive laser processing, such as laser beam overlap and multiple scans, generates both a thick, brittle recast layer and a thin material thickness, thereby greatly reducing the mechanical strength of the substrate. In addition, there is no report on fabricating a superhydrophobic surface on a superalloy substrate whose application includes a self-cleaning property. This work proposes the fabrication of a superhydrophobic surface on a superalloy substrate with high mechanical strength by optimizing the laser processing parameters including laser power, scanning speed, line spacing, and number of scans. We found that the microstructures required by superhydrophobicity could be constructed with a single laser scan. which could guarantee a minimal loss of the mechanical strength. The fabricated superhydrophobic surface on the superalloy substrate exhibited excellent self-cleaning of carbon deposition, showing good application potential in the aero engine field. [ABSTRACT FROM AUTHOR]

Utilizing waste materials in producing ultra-high-performance concrete (UHPC) represents a highly effective approach to creating environmentally sustainable concrete using renewable resources. This study focused on incorporating ground glass cullet (GP) at various replacement levels in UHPC production. Additionally, plastic bottle fibers (PBFs) were derived from discarded plastic bottles and employed in the mix. The replacement levels for GP spanned from 0% to 40%. Single-use plastic bottles were transformed into strip fibers, both with and without the inclusion of microsteel fibers, at varying contents of 1.1% and 2.2% (volume-based). A single-fiber test was conducted on PBFs under different strain rates. The introduction of optimal GP content had a profound positive iMPact on compressive strength. Incorporating 2.2% plastic strips induced strain hardening behavior, while further inclusion of microsteel fibers resulted in substantial enhancements in mechanical properties. Two types of microsteel fibers were employed, characterized by different aspect ratios of 65 and 100. The optimum GP content was identified as 10%. Moreover, the UHPC mix achieved superior compressive strength, exceeding 140 MPa when composed of 1.3% (volume-based) microsteel fibers with an aspect ratio of 65 and 2.2% PBF (volume-based). Notably, mixtures featuring microsteel fibers with a higher aspect ratio demonstrated the highest flexural strength, exceeding 8000 N in the presence of 2.2% PBF. Longer microsteel fibers exhibited adequate slip properties, facilitating strain transfer and achieving a strain-hardening response in conjunction with plastic bottle fibers. These findings illuminate the potential for harnessing hazardous waste materials to improve the performance and sustainability of UHPC formulations. [ABSTRACT FROM AUTHOR]

One of the biggest challenges in the construction industry in recent times is the mitigation of the environmental impact of this sector, the reduction in dependence on primary raw materials, and the reduction in CO2 production while maintaining functional properties. Alkaline activation of a number of waste products represents a promising way to achieve the above-mentioned goals, but the availability of a number of waste products changes over time, especially in Europe. While freshwater sediments were in the past widely utilized as an agricultural fertilizer, recent precautions have significantly decreased such application, and thus new destinations must be delivered. To explore the potential of freshwater sediments, select samples from various locations were subjected to detailed characterization to verify the applicability of the material for alkali activation. As recognized, the selected sediments contain a substantial volume of desired mineralogical compounds that can serve, after 900 °C curing, as suitable precursors. Such samples have consequently activated the mixture of alkaline activators to obtain dense structures and were subjected to detailed investigation aimed at understanding the mechanical parameters. The obtained mechanical results ranging between 14.9 MPa and 36.8 MPa reveal the engineering potential of sediments for valorization through alkali activation and outline new research challenges in this area. [ABSTRACT FROM AUTHOR]

This study investigates the impact of incorporating Juncus fibers (JF) into compressed earth blocks (CEBs) stabilized with varying Portland cement contents, aiming to enhance local construction materials' performance and reduce housing costs. CEB composites were produced with soil stabilized using different cement contents (4%, 8%, and 12% by weight) and JF reinforcement (0 to 0.2% by weight), compressed at 10 MPa with a hydraulic press. After 28 days of drying, the CEBs underwent diverse experimental characterizations to assess their physical, mechanical, thermal, and durability properties. The results revealed that incorporating JF led to a reduction in unit weight, ultrasonic pulse velocity (up to 36%), and dry compressive strength (approximately 17%). Higher fiber content correlated with increased water absorption and an increased capillarity coefficient. Thermal conductivity analysis indicated improved thermal performance, decreasing from 0.4350 W/m·K (12% cement without fibers) to 0.2465 W/m·K (4% cement with 0.2% JF). Despite the decrease in mechanical strength, CEBs with lower cement (4%) and higher fiber content (0.2%) demonstrated satisfactory durability (abrasion and erosion) and thermal insulation properties. This research suggests the potential of this material as a promising composite for the building materials industry. The findings contribute valuable insights into sustainable construction materials and have implications for cost-effective housing solutions. [ABSTRACT FROM AUTHOR]

Sodium sulfate (SS) is a neutral activator. SS-activated alkali-activated slag cement (AASC) has lower shrinkage. However, it sets slowly, and the mechanical property develops slowly. Slaked lime (SL) is an alkaline substance widely used in industry that can be used as an activator in AASC. In this paper, SL was used alone, and SL and SS were mixed together to prepare AASC. The effects of SL content on the setting time, shrinkage properties and mechanical strength of AASC were investigated. Furthermore, the mechanism was explored with the analysis of microscopic tests. The results showed that SS could not be used as an activator alone, while SL could be used as an activator alone, and SS could be combined with SL to prepare AASC. The setting time of the SL system or the SS-SL mix system decreased with the increase in SL. The mechanical properties of the SL system were poor. The SS-SL system showed the highest mechanical properties when SL was 3%. With the increase in SL, the autogenous and drying shrinkage of the SL system increased, while the former of the SS-SL system increased and the latter decreased. At the same time, due to the different changes in pore structure and mesoporous volume in the two systems, the drying shrinkage showed different changes. Compared with the SL system, ettringite (AFt) with a slight expansion property and more crystal phases were formed in the SS-SL system, which reduced the drying shrinkage. [ABSTRACT FROM AUTHOR]

Improving the hydrophilicity and mechanical strength of membranes in water treatment applications remains challenging. In this study, modified vermiculite (VT-M) and a hydrophilic polyvinylpyrrolidone (PVP) were introduced into a polyethyleneimine-functionalized polyvinylidene fluoride composite membrane (PVDF/PEI) to prepare a comprehensively modified mixed-matrix PVDF composite membrane adsorbent that exhibited high mechanical strength and excellent hydrophilicity. The modified composite membrane featured good tensile properties, with a maximum tensile strength of 2.093 MPa, which was 2.5 times that of the PVDF/PEI membrane. After 7 s, the water contact angle of the composite membrane decreased to 0°, leading to significantly improved hydrophilicity. The modified composite membrane exhibited excellent adsorption selectivity for mercury ions, with a fitted maximum adsorption capacity of 807 mg/g. In a mixed-metal ion solution, the selectivity of the membrane for Hg(II) ions was 1.2 × 105 times that for Cd(II) ions. The adsorption mechanism of Hg(II) ions involved chelation, electrostatic attraction, and crystal growth processes. The present work suggests the great potential of mixed-matrix PVDF composite materials in the remediation of mercury-polluted water environments. [ABSTRACT FROM AUTHOR]

To enhance the density and properties of Tsoongiodendron odorum and expand its range of applications, the physical and mechanical characteristics, such as density and hardness, were investigated after impregnating a solution of sodium carbonate and calcium chloride to generate calcium carbonate filler within the wood, followed by thermal compression. The results showed that the surface density of wood was significantly increased by 86.4%. The rate of weight gain gradually increased with sodium carbonate concentration, reaching a maximum of 55.67%. Hardness increased by 85.3%. The optimal treatment process is a compression rate of 5%, a pressing temperature of 170 °C, and a hot-pressing time of 30 min. Microscopic observations revealed that the calcium carbonate was predominantly distributed on the surfaces of wood, while the surface cells exhibited deformation upon compression. Conversely, the cells in the innermost region of the wood remained largely unaltered, thereby achieving a stratified compression effect. Impregnation and compression treatment increases the hardness and bending strength of Tsoongiodendron odorum, but spring-back may occur, and the dimensional stability measures necessitate further investigation and analysis. [ABSTRACT FROM AUTHOR]

Bridges are structures subjected to multiple types of loads and combinations during their service life. The uncertainties linked with the materials' behavior and manufacturing processes often necessitate the testing of produced elements on a real scale. This is particularly true for bridge concrete precast girders, which are frequently tested to predict the ultimate carrying load. Testing procedures are time-consuming, expensive in terms of both time and money, and involve a large amount of logistics and auxiliary equipment and devices. Thus, testing scaled-down models in laboratory conditions and extrapolating the obtained results with respect to the real-scale element using similitude theory has become a very common alternative method in the last decade. In this paper, experimental data regarding the efficiency of dimensional analysis computation are discussed. The proposed method involves comparing the values at which failure in bending and shear occurs for a 1:10 cementitious concrete bridge beam model with respect to the values computed for the prototype beam. Regarding the obtained results, a very small difference between the test results and the calculated values can be noticed. [ABSTRACT FROM AUTHOR]

The present work focuses on the further development of a new family of geopolymers obtained by the alkaline activation of a binder. The aim is to find a viable alternative to concrete that can be used in civil construction. Regarding the influence of the curing temperature on this type of mixture, the recommendations in the existing literature are different for fly ash, ground granulated blast-furnace slag, and metakaolin-based geopolymers. While for fly ash and slag, increasing the curing temperature above 60 °C is reported to be advantageous, for metakaolin geopolymers, the opposite is reported. In this context, the objective of this work is to evaluate the mechanical strength of several metakaolin-based geopolymer specimens subjected to different curing temperatures (10, 15, 20, 30, 40 and 50 °C). Furthermore, several stress-strain diagrams are also shown. Based on the results, we recommend using curing temperatures below 30 °C in order to avoid reducing the strength of metakaolin-based geopolymers. Curing at 50 °C, relative to room temperature, results in a reduction of more than 35% in flexural strength and a reduction of more than 60% in compressive strength. Regarding the behavior of the geopolymers, it was found that the strain, at the ultimate stress, is about 2 to 2.5 times the strain of an equivalent cement mortar. [ABSTRACT FROM AUTHOR]

The disposal of industrial wastewater (IWW) discharged from factories is a significant topic in the environment field, and the use of cement-based materials is a useful way to treat materials with unexpected ions. In this work, IWW with abundant SO42− collected from a factory was utilized to prepare cement mortar (IWWCM), and three kinds of nanomaterials (NMs), including nano-SiO2 (NS), nano-CaCO3 (NC), and nano-metakaolin (NMK), were used to improve the performance of IWWCM. The compressive strengths, hydration degree, hydration products, and micropore structure of the specimens were investigated. The test results showed that IWW reduced the strength of the specimens, and the use of NMs could compensate for this strength reduction. To be specific, the 28-day strength of the freshwater (FW) mixed specimen was 44.6 MPa, and the use of IWW decreased this value to 41.8 MPa. However, the strengths of the specimens with NMs were all higher than 50 MPa, indicating the advantage of NMs for the strengths of the IWWCMs. Moreover, the IWWCM showed a lower hydration degree with a poor pore structure, whereas the use of NMs in IWWCMs refined these properties, explaining the strength increase in the specimens. The results of the SO42− content measurements also showed that the use of NMs could improve the SO42− binding ratio, which is conducive to relieving the pressure of IWW disposal for industrial factories. [ABSTRACT FROM AUTHOR]

The physical and mechanical properties of novel bio-based polymer blends of polylactic acid (PLA), poly(butylene succinate) (PBS), and poly (butylene adipate-co-terephthalate) (PBAT) with various added amounts of nanohydroxyapatite (nHA) were investigated in this study. The formulations of PLA/PBS/PBAT/nHA blends were divided into two series, A and B, containing 70 or 80 wt% PLA, respectively. Samples of four specimens per series were prepared using a twin-screw extruder, and different amounts of nHA were added to meet the regeneration needs of bone graft materials. FTIR and XRD analyses were employed to identify the presence of each polymer and nHA in the various blends. The crystallization behavior of these blends was examined using DSC. Tensile and impact strength tests were performed on all samples to screen feasible formulations of polymer blends for bone graft material applications. Surface morphology analyses were conducted using SEM, and the dispersion of nHA particles in the blends was further tested using TEM. The added nHA also served as a nucleating agent aimed at improving the crystallinity and mechanical properties of the blends. Through the above analyses, the physical and mechanical properties of the polymer blends are reported and the most promising bone graft material formulations are suggested. All blends were tested for thermal degradation analysis using TGA and thermal stability was confirmed. The water absorption experiments carried out in this study showed that the addition of nHA could improve the hydrophilicity of the blends. [ABSTRACT FROM AUTHOR]