Search

To address the critical issue of slope stability in jointed rock masses with complex and rough structural planes, a rough joint network model using the Fourier transform was proposed and applied to the Shilu open pit mine. The on-site structural plane survey results were combined with MATLAB and PFC2D to establish numerical models for slope stability analysis considering both linear-jointed and rough-jointed rock slopes. By comparing the slip body and fracture distribution, it was found that the rough-jointed slope was stabler than the linear-jointed slope. In addition, the fracture patterns and slip displacement were significantly influenced by the inclination and undulation of the bedding planes. Slip failure patterns occurred when the angle of inclination was set at 60°. The joints played a crucial role in inducing the shear strength of slope rock masses, and the slide area was mainly observed in the shallow slope surface for inclination angles of 0° and 45°, and in the middle deep area for 60° and 90°. These results demonstrated the importance of considering rough non-persistent fractures when developing a new numerical model for slope failure modes. [ABSTRACT FROM AUTHOR]

The article presents a novel yielding mechanism, especially designed for the rock bolt support. Mechanical rock bolts with an expansion head and equipped with one, two, four and six dome bearing plates were tested in the laboratory conditions. Furthermore, in the Phase2D numerical program, five room and pillar widths were modeled. The main aim of numerical modeling was to determine the maximal range of the rock damage area and the total displacements in the expanded room. The models were made for a room and pillar method with a roof sag for copper ore deposits in the Legnica-Głogów Copper District in Poland. Additionally, in the article a load model of the rock bolt support as a result of a geomechanical seismic event is presented. Based on the results of laboratory tests (load–displacement characteristics), the strain energy of the bolt support equipped with the yielding device in the form of dome bearing plates was determined and compared with the impact energy caused by predicted falling rock layers. Based on the laboratory tests, numerical modeling and mathematical dynamic model of rock bolt support, the dependence of the drop height and the corresponding impact energy for the expanded room was determined. [ABSTRACT FROM AUTHOR]