Search

Nuclear energy plays a crucial role in global carbon reduction. However, thermal discharges from nuclear power plants can potentially impact marine ecosystems. This study investigates the long-term thermal impact of the Haiyang Nuclear Power Plant on the adjacent marine environment using a decade-long Landsat thermal infrared dataset. Spatial and temporal patterns of thermal discharge were analyzed, focusing on the temperature difference between intake and outlet water, the warming trend in the thermal mixing zone, and the spatial distribution of the thermal plume. Our results indicate the following: (1) Seasonal Variation in Thermal Discharge: The temperature difference between intake and outlet water exhibited significant seasonal variability, with higher values in winter and lower values in summer. The spatial distribution of the thermal plume was influenced by tidal currents, leading to a cyclical pattern. (2) Long-Term Warming Trend: Prolonged thermal discharge resulted in a notable warming trend in the thermal mixing zone, with an average annual increase of 0.3 °C. This warming effect was most pronounced in winter and least in summer. (3) Spatial Distribution of Thermal Plume: The spatial extent and intensity of the thermal plume varied seasonally. Summer exhibited a larger influence range but with lower temperature rises, while winter showed a smaller influence range but with higher temperature rises. In winter, the 4 °C temperature rise area exceeded the designated environmental functional zone boundary in some instances. These findings provide valuable insights into the thermal impact of nuclear power plants and highlight the importance of considering seasonal variations and long-term monitoring to ensure environmental sustainability. [ABSTRACT FROM AUTHOR]

For the first time, we investigated species composition, phytoplankton community structure, and hydrochemical parameters in the artificial cooling reservoir of a major thermal power plant (TPP) in northeastern Europe located in the Pechora River basin (Komi Republic). Our research, conducted during June and August, revealed a total of 81 species of algae and cyanobacteria, with cyanobacteria predominating. Among these cyanobacteria and microalgae (Bacillariophyta and Chlorophyta), algae that serve as reliable indicators of water quality were identified. The assessment of water quality based on abundance and species composition of indicator phytoplankton species revealed that the waters of the Pechorskoe Reservoir belong to the III class (β-mesosaprobic or moderately polluted). This indicates that water quality is satisfactory, and the reservoir retains the ability to self-purify. The power plant's discharges heat the surface layers, increasing plankton communities' diversity, abundance, and biomass. Such stable warming in the upper layers throughout the season, uncommon for natural water bodies in the north, results in a slight increase in the trophic status of the studied reservoir, supported by hydrochemical analysis. These results provide valuable information about ecosystem functioning under temperature increasing for predicting changes in the phototrophic biota of small northern reservoirs facing the impacts of climate change. [ABSTRACT FROM AUTHOR]

The globalisation of the beer market forces brewers to have methodologies that rapidly evaluate the evolution of beer flavour stability. Commonly used forced ageing methods have limitations since temperature and transportation conditions (temperature, vibrations, long-distance travel, and other factors) impact beer quality. This study assessed the prediction power of a forced ageing methodology on the evolution of aldehydes during maritime transportation across four sample groups (maritime transport, storage simulation, and three ageing periods: 7, 21, and 28 days at 37 °C), which differed in their bottle-opening system (either crown cap or ring pull cap). The results revealed that forced ageing up to 28 days could estimate the evolution of phenylacetaldehyde, 3-methylbutanal, 2-methylpropanal, and hexanal during maritime transport. In contrast, the benzaldehyde content was consistently underestimated, on average, 0.8 times lower. In general, the ageing conditions significantly favoured the formation or liberation from a bound state, up to 2.2 times higher, of trans-2-nonenal, acetaldehyde, and 5-hydroximethylfurfural in comparison to the levels registered on exportation simulation beers. Moreover, forced-aged beers with ring pull caps developed quantifiable levels of nonanal and increased phenylacetaldehyde, benzaldehyde, and acetaldehyde content over time. Moreover, thermal stress induced a continuous increase in the extent of beer staling, up to seven times higher, in most samples. [ABSTRACT FROM AUTHOR]

A gas explosion can impact the roadway and cause serious damage. The thermal effect of the roadway wall is an important factor affecting the gas explosion and its impact. In view of the shortcomings of existing research studies, a basic numerical model of a pipe is established under the thermal impact effect of a gas explosion based on LS-DYNA software. The thermal conductivity coefficients of the pipe wall are set as 15, 30, 45 and 60 W/(m·K), respectively. Five measuring points A–E are set on the inner wall of the pipe, and four measuring points F-I are set in the air region. The equivalent stress distribution of the pipe wall, the pressure and displacement of each measuring point and the time history curve of shock wave velocity at the measuring point in the air region are numerically simulated under the impact of a gas explosion with different thermal effects. The research results show that the stress concentration phenomenon is more obvious and the equivalent stress distribution is more uneven, and the gas explosion intensity is greater when the pipe wall is approximately adiabatic. With an increase in the thermal conductivity coefficient, the amount of thermal dissipation through the pipe wall increases, the pressure peak value of each measuring point of the pipe wall decreases as a whole, and the radial displacement value of the arranged measuring points presents a smaller trend. With an increase in the thermal conductivity coefficient of the pipe wall, the thermal dissipation of the pipe wall increases, so the subsequent energy that drives the shock wave decreases, the impact degree on the pipe wall also decreases, and at the same time, in the pipe with a high thermal conductivity coefficient, the gas explosion energy involved in expansion work is lower, and thus the explosion intensity reduces. The shock wave velocity at a location farther away from the explosion source after a gas explosion also decreases. The research results have important practical significance for improving the theory of the wall thermal effect and the level of gas explosion prevention in confined spaces. [ABSTRACT FROM AUTHOR]

In the face of climate change and constantly progressing urbanization processes, so-called heat islands are observed with growing frequency. These phenomena are mainly characteristic of large cities, where increased air and land surface temperatures form an atmospheric (AUHI) or surface (SUHI) urban heat island (UHI). Moreover, UHIs have also been recognized in the underground environments of many cities worldwide, including groundwater (GUHI). However, this phenomenon is not yet as thoroughly studied as AUHI and SUHI. To recognize and characterize the thermal conditions beneath the city of Wrocław (SW, Poland), we analyze the groundwater temperature (GWT) of the first aquifer, measured in 64 wells in 2004–2005. The study aimed to identify groundwater urban heat islands (GUHI) in Wrocław. Therefore, we used a novel approach to gather data and analyze them in predefined seasonal periods. Meteorological data and satellite imagery from the same period allowed us to link GWT anomalies to the typical conditions that favor UHI formation. GWT anomaly related to the GUHI was identified in the central, urbanized part of Wrocław. Moreover, we found that the GUHI phenomenon occurs only seasonally during the winter, which is related to the city's climate zone and anthropogenic heat sources. Comparing our results with previous works from other cities showed untypical behavior of the observed anomalies. In contrast to AUHI and SUHI temperatures, the GWT anomalies detected in Wrocław are characterized by seasonal transitions from a heat island in winter to a cold lake in summer. Such a transitional character of GUHI is described for the first time. [ABSTRACT FROM AUTHOR]

An alluvial fan is a good area to install open-loop geothermal heat pump (GHP) systems due to shallower aquifers, faster groundwater flow, and fewer land subsidence risks. The natural temperature change in groundwater occurs in alluvial fans due to the recharge of river water and faster groundwater flow, and the thermal impact of the open-loop system has not been studied well in such areas. The purpose of this research is to understand the thermal impact of open-loop GHP systems on an alluvial fan. A regional 3D model of groundwater flow with heat transport was created to determine the distribution of flow velocity and temperature of groundwater. After that, two local models with different groundwater velocities were constructed to demonstrate the thermal impact of an open-loop GHP system using one extraction and one injection well. The results indicated that the local model with faster groundwater flow had a smaller thermal impact. The natural temperature change in groundwater causes groundwater temperature to be lower in the summer and higher in winter during the operation in the local model, with faster groundwater flow. [ABSTRACT FROM AUTHOR]

Permafrost is characterized by low temperature, and its thermal stability is key to geohydrological cycles, energy exchange, and climate regulation. Increasing engineering activities, i.e., road construction and operations, are affecting the thermal stability in permafrost regions and have already led to the degradation of permafrost and caused environmental problems. To understand the spatiotemporal influence of road construction and operations on the thermal dynamics in permafrost regions, we conducted a study in the Ela Mountain Pass where multiple roads intersect on the Qinghai–Tibet Plateau (QTP) and calculated the thermal dynamics from 2000 to 2017 using normalized spectral entropy (measuring the disorderliness of time-series data). Our results indicate that road level is a significant influencing factor, where high-level roads (expressways) exhibit stronger thermal impacts than low-level roads (province- and county-level roads). Our results also indicate that duration of operation is the most significant factor that determines the thermal impacts of roads on permafrost: the thermal impacts of the newly paved expressway are positively related to elevation, while the thermal impacts of the old expressway are positively related to less vegetated areas. The study provides an excellent method for understanding the spatiotemporal impacts of engineering activities on the temperature dynamics in permafrost regions, thereby helping policymakers in China and other countries to better plan their infrastructure projects to avoid environmentally vulnerable regions. The study also calls for advanced techniques in road maintenance, which can reduce the accumulated disturbance of road operations on permafrost regions. [ABSTRACT FROM AUTHOR]

Relative humidity (RH) at the body-seat interface is considered an important factor in both sitting comfort and generation of health concerns such as skin lesions. Technical difficulties appear to have limited research aimed at the detailed and simultaneous exploration of RH and temperature changes at the body-seat interface; using RH sensors without the capability to record temperature where RH is recorded. To explore the causes of a spike in RH consistently produced on first contact between body and seat surface, we report data from the first use of dual temperature and RH (HTU21D) sensors in this interface. Following evaluation of sensor performance, the effect of local thermal changes on RH was investigated. The expected strong negative correlation between temperature and RH (R2 = −0.94) supported the importance of considering both parameters when studying impact of sitting on skin health. The influence of sensor movement speed (higher velocity approach: 0.32 cm/s ± 0.01 cm/s; lower velocity approach: 0.17 cm/s ± 0.01 cm/s) into a static RH region associated with a higher local temperature were compared with data gathered by altering the rate of a person sitting. In all cases, the faster sitting down (or equivalent) generated larger RH outcomes: e.g., in human sitting 53.7% ± 3.3% RH (left mid-thigh), 56.4% ± 5.1% RH (right mid-thigh) and 53.2% ± 2.7% RH (Coccyx). Differences in size of RH change were seen across the measurement locations used to study the body-seat interface. The initial sitting contact induces a transient RH response (duration ≤ 40 s) that does not accurately reflect the microenvironment at the body-seat interface. It is likely that any movement during sitting would result in similar artefact formation. As a result, caution should be taken when investigating RH performance at any enclosed interface when the surfaces may have different temperatures and movement may occur. [ABSTRACT FROM AUTHOR]