Search

Functionalized nanomaterials with surface-active groups have garnered significant research interest due to their wide-ranging applications, particularly in water treatment for removing various contaminants. This study focuses on developing a novel, multi-functional nanobiosorbent by synthesizing nanosized biochar from artichoke leaves (NBAL) and molybdic acid (MA). The resulting nanobiosorbent, MA@NBAL, is produced through a microwave-irradiation process, offering a promising material for enhanced environmental remediation. The characteristics of assembled MA@NBAL were evaluated from SEM-EDX, XPS, TGA, FT-IR, and zeta potential detection. The size of particles ranged from 18.7 to 23.7 nm. At the same time, the EDX analysis denoted the existence of several major elements with related percentage values of carbon (52.9%), oxygen (27.6%), molybdenum (8.8%), and nitrogen (4.5%) in the assembled MA@NBAL nanobiosorbent. The effectiveness of MA@NBAL in removing Hg(II) ions was monitored via the batch study method. The optimized maximum removal capacity of Hg(II) ions onto MA@NBAL was established at pH 6.0, 30.0 min equilibrium time, and 20 mg of nanobiosorbent, providing 1444.25 mg/g with a 10.0 mmol/L concentration of Hg(II). Kinetic studies revealed that the adsorption process followed a pseudo-second-order model, with R2 values ranging from 0.993 to 0.999 for the two tested Hg(II) concentrations, indicating excellent alignment with the experimental data. This suggests that the chemisorption mechanism involves cation exchange and complex formation. Isotherm model evaluation further confirmed the adsorption mechanism, with the Freundlich model providing the best fit, yielding an R2 of 0.962. This result indicates that Hg(II) adsorption onto the surface of MA@NBAL nanobiosorbent occurs on a heterogeneous surface with multilayer formation characteristics. The results of the temperature factor and computation of the thermodynamic parameters referred to endothermic behavior via a nonspontaneous process. Finally, the valid applicability of MA@NBAL nanobiosorbent in the adsorptive recovery of 2.0 and 5.0 µg/mL Hg(II) from contaminated real aquatic matrices was explored in this study, providing 91.2–98.6% removal efficiency. [ABSTRACT FROM AUTHOR]

At present, animal bone glue has been widely used in industry, but there are no relevant research reports on its application in the petroleum industry. In this paper, the rheological properties, inhibition, filtration, and temperature resistance performance of modified bone glue (Mbg) were evaluated in water-based drilling fluids, and the results showed that Mbg can significantly affect the performance of water-based muds with minimal dosage, and temperature resistance of Mbg could reach up to 130 °C. The inhibition mechanism of Mbg in drilling fluids was investigated by infrared spectroscopy (FT-IR), X-ray diffraction (XRD), zeta potential, thermogravimetric analysis (TGA), and scanning electron microscope (SEM). Results revealed that when 2% Mbg was added, a three-dimensional network structure was formed in an aqueous solution, which reduced the water content from 4.83% to 4.23%. FT-IR analysis showed that Mbg strongly adsorbed onto clay through hydrogen bonding, which reduced the clay particles in based muds from 1.251 µm to 0.789 µm and effectively controlled the filtration loss of the drilling fluids. [ABSTRACT FROM AUTHOR]

This research targets the need for eco-friendly strategies in the synthesis of bioactive materials, addressing the importance of valorization of vegetal waste. This study focuses on developing biohybrids containing biomimetic lipid vesicles and phytosynthesized gold–silver chloride nanoparticles (AuAgCl NPs) derived from Achillea millefolium L. extract. By leveraging the natural antioxidant and antimicrobial properties of the plant, the research proposes a sustainable approach to creating materials with potential biomedical applications. The biomimetic membranes were loaded with chlorophyll a, a natural spectral marker. Three types of bioactive materials (biohybrids) were developed by varying the lipid vesicle/AuAgCl NP ratio. Optical (UV-Vis, fluorescence emission, FTIR), structural (XRD), elemental (EDX, XPS), and morphological (TEM) studies were performed to characterize the bio-developed materials. The hydrophobic/hydrophilic characteristics of the samples were investigated by measuring the water contact angle, and their size was estimated by DLS and TEM. Zeta potential measurements were used to evaluate the physical stability of phyto-developed particles. Antioxidant properties of phyto-particles were investigated through the chemiluminescence technique. The obtained biomaterials exhibited high antioxidant activity and antiproliferative activity against HT-29 and B-16 cancer cells. Therapeutic index values were calculated for each biohybrid. Additionally, the bio-prepared hybrids revealed biocidal action against Staphylococcus aureus and Enterococcus faecalis. The phyto-developed biomaterials are promising in biomedical applications, particularly as adjuvants in cancer therapy. [ABSTRACT FROM AUTHOR]

Treatment of infections caused by Pseudomonas aeruginosa presents a challenge due to its ability to adapt and acquire drug resistance rapidly. Therefore, a key challenge is identifying and investigating new compounds with antibacterial and anti-virulence activity. Tannins, a group of plant polyphenolic compounds, can interact with bacterial cells and their virulence factors. The purpose of this study was to assess the antibacterial potential of using 3,6-bis-O-di-O-galloyl-1,2,4-tri-O-galloyl-β-D-glucose (C55H40O34) isolated from Rhus typhina against P. aeruginosa ATCC BAA-1744. The investigation involved viability analyses using the INT assay, fluorescence analyses of the tannins' interaction with the cell membrane and membrane proteins of P. aeruginosa, and analysis of changes in the Zeta potential. The results obtained allowed us to conclude that C55H40O34 exhibits antimicrobial activity by inducing changes in the biophysical properties of P. aeruginosa's cell membrane. The thermodynamic parameters indicated that C55H40O34 binds to bacterial membrane proteins through hydrophobic interactions. These interactions with proteins may impact their structure and disrupt their functions, such as disturbing or inhibiting the efflux pumps, which are part of P. aeruginosa's resistance mechanisms. Therefore, C55H40O34 may be a new, natural agent and could potentially be used against P. aeruginosa. [ABSTRACT FROM AUTHOR]

This study aimed to assess pumpkin leaves as a protein source and determine the feasibility of these proteins to form complexes with alginate for the encapsulation of folic acid. Different isolation protocols, two based on isoelectric precipitation (one with thermal pretreatment and the other with alkali pre-extraction) and one based on stepwise precipitation with ammonium sulfate, were compared regarding the yield and structural properties of the obtained leaf protein concentrates (LPC). The highest purity of protein was achieved using the thermal-acid protocol and the salting-out protocol at 40% saturation. RuBisCO protein was detected by SDS-PAGE in all LPCs, except for the fractions obtained through salting-out at saturation level ≥ 60%. Complexation of the LPC solutions (1 mg/mL) and sodium alginate solution (10 mg/mL) was monitored as a function of LPC:alginate ratio (2:1, 5:1, and 10:1) and pH (2–8) by zeta-potential measurements and confirmed by FT-IR analysis. Based on the results, the strongest interaction between LPCs and alginate occurred at a pH between 2.20 and 2.80 and an LPC:alginate ratio of 10:1. Complexation resulted in particle yields of 42–71% and folic acid entrapment of 46–92%. The LPC-folic acid interactions elucidated by computational protein–ligand docking demonstrated the high potential of RuBisCO as a biocarrier material for folic acid. The in vitro release study in the simulated gastrointestinal fluids indicated that complexes would be stable in gastric conditions, while folic acid would be gradually released in the intestinal fluids. [ABSTRACT FROM AUTHOR]

Background/Objectives: The aims of the presented study were the development of four types of silibinin-loaded liposomes (multilamellar liposomes—MLVs, sonicated small unilamellar liposomes—SUVs, UV-irradiated liposomes, and lyophilized liposomes) and their physicochemical characterization and biological potential related to skin health benefits. Methods: The characterization was performed via the determination of the encapsulation efficiency (EE), particle size, polydispersity index, zeta potential, conductivity, mobility, storage stability, density, surface tension, viscosity, FT-IR, and Raman spectra. In addition, cytotoxicity on the keratinocytes and antioxidant and anti-inflammatory potential were also determined. Results: UV irradiation significantly changed the rheological and chemical properties of the liposomes and increased their cytotoxic effect. The lyophilization of the liposomes caused significant changes in their EE and physical characteristics, decreased their ABTS and DPPH radical scavenging potential, and increased their potential to reduce the expression of interleukin 1 beta (IL-1β) in cells treated with bacterial lipopolysaccharide. Sonication significantly changed the EE and physical and rheological properties of the liposomes, and slightly increased their cytotoxicity and reduction effect on IL-1β, while the anti-ABTS and anti-DPPH capacity of the liposomes significantly increased. All developed liposomes showed an increasing trend in particle size and a decreasing trend in zeta potential (absolute values) during storage. Conclusions: Silibinin-loaded liposomes (MLVs and lyophilized) showed promising antioxidant activity (toward reactive oxygen species generated in cells) and anti-inflammatory effects (reducing macrophage inhibitory factor expression) on keratinocytes and did not lead to a change in their viability. Future perspectives will focus on wound healing, anti-aging, and other potential of developed liposomes with silibinin in sophisticated cell-based models of skin diseases, wounds, and aging. [ABSTRACT FROM AUTHOR]

Background/Objectives: Trans-resveratrol (Res) has been reported to possess many biological activities, including neuroprotective effects, owing to its anti-inflammatory and antioxidant properties. However, Res has very low water solubility, which limits its therapeutic application. In this work, we formulated water-soluble micellar formulations incorporating Res using polyethylene glycol monostearate (stPEG). Methods: These formulations (stPEG/Res) were developed using five types of stPEG containing 10, 25, 40, 55 and 140 PEG repeat units. The formulations were characterized for Res content, water solubility, particle size, zeta potential, precipitation, biodistribution, and efficacy against neuronal and motor dysfunction in intracerebral hemorrhage (ICH). Results: Intravenous administration of stPEG40/Res, which demonstrated particle size, water solubility, and biodistribution properties suitable for intravenous administration, suppressed neurological and motor dysfunction following in a collagenase-induced ICH mouse model. These effects were inhibited by zinc protoporphyrin-9, an inhibitor of the antioxidant enzyme heme oxygenase-1, suggesting that Res contributes to antioxidant enzyme expression and anti-inflammatory activity. Conclusions: The stPEG/Res micellar formulation developed in this study may offer a promising therapeutic approach for ICH treatment. [ABSTRACT FROM AUTHOR]

Background: This study introduces a novel dexamethasone (DEX) mixed micellar system (DEX-MM) using Soluplus® and Pluronic F-127 (PF127) to enhance ocular drug delivery. The enhancement of ocular application properties was achieved by creating a chitosan-coated DEX-MM (DEX-CMM), which promotes better adherence to the ocular surface, thereby improving drug absorption. Methods: Using the solvent evaporation method, a formulation was developed with a Soluplus®-to-drug ratio of 1:10, enhanced with 0.25% PF127. After dispersing in water, 1% chitosan (CS) was added. The stability and integrity of DEX within the micelles were verified using attenuated total reflection–Fourier transform infrared spectroscopy (ATR-FTIR) and differential scanning calorimetry (DSC). Additionally, in vitro and ex vivo drug release studies were conducted. Results: DEX-CMM (F6) demonstrated a particle size of 151.9 ± 1 nm and a polydispersity index (PDI) of 0.168 ± 0.003, suggesting uniformity and high electrostatic stability with a zeta potential of +35.96 ± 2.13 mV. The non-Fickian drug release mechanism indicated prolonged drug retention. Comparative analyses showed DEX-CMM outperforming a standard DEX suspension in drug release and ocular tissue permeation, with flux measurements significantly higher than the DEX suspension. Conclusion: The study confirmed the efficacy of DEX-CMM in enhancing drug delivery to ocular tissues, evidenced by improved permeability. Safety evaluations using the HET-CAM test demonstrated that DEX-CMM was non-irritant, supporting its potential for effective ocular drug delivery. [ABSTRACT FROM AUTHOR]

Background: Gene therapy can be viewed as a promising/valuable therapeutic approach directed to cancer treatment, including glioblastoma. Concretely, the combination of gene therapy with chemotherapy could increase its therapeutic index due to a synergistic effect. In this context, bovine serum albumin (BSA)-coated temozolomide (TMZ)-peptide (WRAP5)/p53 gene-based plasmid DNA complexes were developed to promote payload co-delivery. Methods: Design of experiments (DoE) was employed to unravel the BSA-coated TMZ-WRAP5/p53 nanocomplexes with the highest potential by considering the nitrogen to phosphate groups ratio (N/P), and the BSA concentration as inputs and the size, polydispersity index, surface charge and p53-based plasmid complexation capacity (CC) as DoE outputs. Results: The obtained quadratic models were statistically significant (p-value < 0.05) with an adequate coefficient of determination, and the correspondent optimal points were successfully validated. The optimal complex formulation had N/P of 1.03, a BSA concentration of 0.08%, a size of approximately 182 nm, a zeta potential of +9.8 mV, and a pDNA CC of 96.5%. The optimal nanocomplexes are approximately spherical. A cytotoxicity assay showed that these BSA-coated TMZ-WRAP5/p53 complexes did not elicit toxicity in normal brain cells, and a hemolysis study demonstrated the hemocompatibility of the complexes. The complexes were stable in cell culture medium and fetal bovine serum and assured pDNA protection and release. Moreover, the optimal BSA-coated complexes were able of gene transcription and promoted a significant inhibition of glioblastoma cell viability. Conclusions: The reported findings instigate the development of future research to evaluate their potential utility to TMZ/p53 co-delivery. The DoE tool proved to be a powerful approach to explore and tailor the composition of BSA-coated TMZ-WRAP5/p53 complexes, which are expected to contribute to the progress toward a more efficient therapy against cancer and, more specifically, against glioblastoma. [ABSTRACT FROM AUTHOR]

Background/Objectives: Nanoemulsions (NEs) possess properties that enhance the solubility, bioavailability and therapeutic efficacy of drugs. Chalcones are compounds known for their antifungal properties. In this study, we evaluated different emulsification techniques to create alginate nanoemulsions containing chalcone (1E,4E)-1,5-bis (4-methoxyphenyl) penta-1,4-dien-3-one (DB4OCH3). Our goal was to develop an antifungal formulation targeting Candida albicans strains. Methods: Ultrasound and ultrasound combined with high-speed homogenization techniques were used to prepare alginate-stabilized nanoemulsions. Particle size, zeta potential and encapsulation efficiency were evaluated. Additionally, in vitro release studies were conducted. Results: The combined emulsification technique produced stable nanoparticles with high encapsulation efficiency and antifungal activity, with a minimum inhibitory concentration of 8.75 μg/mL for the nanoemulsions compared to 312 µg/mL for free DB4OCH3. NEs' effectiveness can be attributed to their ability to form nanodroplets efficiently, facilitating the solubilization of the chalcone in the oily phase. The particle size varied between 195.70 ± 2.69 and 243.40 ± 4.49 nm, with an increase in chalcone concentration leading to larger particle sizes. The zeta potential showed values from −91.77 ± 5.58 to −76.90 ± 4.44 mV. The UHS-7 sample exhibited an encapsulation efficiency of 92.10% ± 0.77, with a controlled in vitro release of 83% after 34 h. Molecular docking simulations showed that the aromatic nature of DB4OCH3 resulted in the formation of apolar interactions with aromatic residues located in the active site of the TMK, as observed in their respective co-crystallized inhibitors, within an affinity energy range that enables optimum specificity of the ligand for these two pathways. Pharmacokinetic analyses indicated high passive cell permeability and low hepatic clearance, and phase I metabolism reduces its oral bioavailability and metabolic stability, suggesting a promising active ingredient as an oral drug with control of the daily oral dose administered. Conclusions: The combined nanoemulsification technique led to the formation of finely dispersed nanodroplets that favored the solubilization of the chalcone in the oil phase, which led to a better performance in the antifungal properties. DB4OCH3 shows promise as an oral drug with controlled dosing. [ABSTRACT FROM AUTHOR]

Background: Voriconazole is an antifungal drug, which is classified under Bio-Classification System-II and has low water solubility (0.71 mg/mL) and high permeability. Hardly any endeavors have been made to increase the bioavailability of voriconazole. Objective: To develop and evaluate a solid SMEDDS (self-microemulsifying drug delivery system) for antifungal activity. Methods: Based on solubility studies of Labrafil-M 1994 CS (oil), Cremophor-RH 40 (a surfactant) and Transcutol-HP (a co-surfactant) were selected as components of the SMEDDS and a pseudo-ternary phase diagram was prepared. Thereafter, the oil, surfactant, and co-surfactant were mixed with altered weight ratios (1:1/1:2/2:1) and evaluated through various in vitro, in vivo analyses. Results: The particle size of the optimized formulation was observed to be 19.04 nm and the polydispersity index (PDI) value was found to be 0.162 with steady-state zeta potential. The optimized liquid SMEDDS was converted into a solid SMEDDS. Various adsorbents, such as Aerosil-200, Avicel-PH101, Neusilin-US2, and Neusilin UFL2 were screened to better detect the oil-absorbing capacity and flow properties of the powder. Neusilin UFL2 was selected as an adsorbent due to its better oil-absorbing capacity. DSC, X-ray diffraction, and dissolution studies were carried out to characterize the formulation. Further, the Pharmacokinetic profile was also studied in Wistar rats and the Cmax, tmax, and AUC0→t were calculated. The Cmax and AUC0→t plasma concentration is considerably better for the SMEDDS than for the pure drug and marketed formulation. Conclusions: This investigation clearly reveals the potential of developing a solid SMEDDS for candidiasis and invasive aspergillosis treatment, with better efficacy as compared to the commercially available marketed formulation. [ABSTRACT FROM AUTHOR]

Berberine hydrochloride (BH) extracted from Coptis chinensis (CC) and Matrine (MT) separated from Sophora flavescens (SF) are alkaloids with potent anti-bacterial, anti-inflammatory, and anti-tumor effects. Motivated by the clinical practice of using CC and SF together, we aimed to demonstrate that the synergistic application of the natural compounds BH and MT could enhance therapeutic effects and minimize side effects. Two types of liposomes, liposomes containing only BH (BH-LP) and liposomes containing both BH and MT (BH-MT-LP), were successfully prepared via the reverse evaporation method. The liposome preparation process was optimized by single-factor screening and the Box–Behnken experimental design method. The results showed that the liposomes had particle sizes in the range of 222.7 to 235.4 nm, polydispersity indicated in the range of 11.8% to 23.3%, and zeta potentials in the range of −35.9 to −31.1 mv. BH-MT-LP showed superior anti-tumor activity against MDA-MB-231, HepG-2, and HGC-27 cells in vitro. The incorporation of MT effectively promoted the anti-tumor effect of BH, while the controlled release from liposomes further enhanced the therapeutic efficacy of BH. Furthermore, based on the flow cytometry results, we speculated that BH-MT-LP might promote apoptosis by blocking the G1 phase of cells and inducing cell death. In conclusion, BH-MT-LP provides evidence for the combined use of natural compounds as a stable, safe, and practical drug delivery system for the treatment of potential cancers. Meanwhile, the successful preparation for BH-MT-LP also provides a new approach to the combined use of traditional Chinese medicine ingredients. [ABSTRACT FROM AUTHOR]

Chitosan (Ch), a natural polysaccharide, is known for its biocompatibility, biodegradability, and various beneficial properties, including antioxidant and antibacterial activities. The objective of this study is to investigate the functionalization of zinc oxide (ZnO) with chitosan to develop a novel ZnO@Ch adduct for use in cosmetic formulations, specifically as a sun protection agent. The functionalization was achieved through ionotropic gelation, which enhanced the stability and reduced the photocatalytic activity of ZnO, thereby improving its safety profile for skin applications. FTIR spectroscopy confirmed the successful functionalization, while TGA and DSC characterized the thermal properties and stability. The Zeta potential and particle size analyses demonstrated improved stability of ZnO@Ch across various pH levels compared to uncoated ZnO. The structure of the obtained adduct was also confirmed by SEM analysis. The ZnO@Ch adduct exhibited enhanced stability at neutral and slightly alkaline pH values, reduced photocatalytic activity compared to pure ZnO, and had lower cytotoxicity in 3T3 cells compared to pure ZnO, particularly at higher concentrations. The ZnO@Ch adduct provided a higher Sun Protection Factor (SPF) and UVA Protection Factor (UVA-PF) than pure ZnO, indicating enhanced UV protection. The adduct's ability to provide higher SPF at lower ZnO concentrations offers economic and environmental benefits, aligning with sustainable product design principles. Future studies will focus on optimizing the formulation and testing the efficacy and safety at higher concentrations to fully realize its potential as a natural, eco-friendly sunscreen ingredient. [ABSTRACT FROM AUTHOR]

The biosynthesis of silver nanoparticles (AgNPs) presents an innovative and sustainable approach in nanotechnology with promising applications in fields such as medicine, food safety, and pharmacology. In this study, AgNPs were successfully synthesized using the probiotic strain Lacticaseibacillus rhamnosus (BCRC16000), addressing challenges related to stability, biocompatibility, and scalability that are common in conventional nanoparticle production methods. The formation of AgNPs was indicated by a color change from yellow to brown, and UV–visible spectrophotometry confirmed their presence with a characteristic absorption peak at 443 nm. Furthermore, Fourier transform infrared (FTIR) spectroscopy revealed the involvement of biomolecules in reducing silver ions, which suggests their role in stabilizing the nanoparticles. In addition, field emission scanning electron microscopy (FE-SEM) showed significant morphological and structural changes. At the same time, dynamic light scattering (DLS) and zeta potential analyses provided valuable insights such as average size (199.7 nm), distribution, and stability, reporting a polydispersity index of 0.239 and a surface charge of −36.3 mV. Notably, the AgNPs demonstrated strong antibacterial activity and photocatalytic efficiency, underscoring their potential for environmental and biomedical applications. Therefore, this study highlights the effectiveness of Lacticaseibacillus rhamnosus in the biosynthesis of AgNPs, offering valuable antibacterial and photocatalytic properties with significant industrial and scientific implications. [ABSTRACT FROM AUTHOR]

Plant-derived nanovesicles represent a novel approach in the field of plant-derived biomaterials, offering a sustainable and biocompatible option for various biomedical applications. The unique properties of these vesicles, such as their ability to encapsulate bioactive compounds, make them suitable for therapeutic, cosmetic, and nutraceutical purposes. In this study, we have, for the first time, successfully bio-fabricated vesicles derived from Opuntia ficus-indica (FicoVes) using an efficient and cost-effective method. Characterized by a size of approximately of 114 nm and a negative zeta potential of −20.9 mV, FicoVes exhibited excellent biocompatibility and hemocompatibility, showing no reduction in the viability of human and animal cells. Our results showed that FicoVes possess significant antioxidant properties as they reduced ROS generation in TBH-stimulated cells. FicoVes displayed anti-inflammatory properties by reducing the expression of pro-inflammatory cytokines (Il 1β, TNF α) and enhancing the expression of anti-inflammatory cytokines (IL4, IL10) following an inflammatory stimulus. Furthermore, FicoVes accelerated epithelial wound closure in L929 fibroblast monolayers in a dose-dependent manner, highlighting their potential role in tissue repair. This study establishes FicoVes as a promising candidate for nutrigenomic applications, particularly in the context of inflammation-related disorders and wound healing. Further research, including in vivo studies, is essential to validate these findings and fully explore their therapeutic potential. [ABSTRACT FROM AUTHOR]

Biopolymer chitosan sub-micron particles (CSMPs) were prepared by the ionic gelation technique crosslinked with sodium tripolyphosphate co-loaded with trans-cinnamaldehyde (TCIN), and either curcumin (CUR) or paclitaxel (PTX). The size of the spherical CSMPs increased from 118 nm to 136 nm and 170 nm after the loading of TCIN and CUR, whereas the loading of PTX led to a slight decrease (114 nm). Polydispersity indexes of all the samples were smaller than 0.4, indicating monodisperse particles. Zeta potential values higher than +40 mV were determined, which is direct proof of the high stability of these nanoparticles. TCIN and PTX release studies in vitro, at pH 6.5 and 7.4, showed a pH dependence on the release rate with a higher value at pH 6.5. However, CUR was not released from CSMPs probably due to strong interactions with CS biopolymer chains. Cytotoxicity studies showed that the systems loaded with TCIN and PTX were more cytotoxic for HeLa cancer cells than for MDCK cells. Moreover, a synergistic effect against HeLa cells was observed for the TCIN-PTX-loaded CSMP samples. The Sensitivity Index indicated that the CSMPs loaded with TCIN have a prospective attraction to carry and release conventional or new chemotherapeutic drugs. This study demonstrates the in vitro efficiency of the obtained drug delivery system, but in vivo studies are necessary to confirm its potential for clinical applications. [ABSTRACT FROM AUTHOR]

This study analyzes the behavior of sodium polyacrylate (NaPA) as a rheological modifier for clay-based tailings. Special emphasis is placed on the impact of calcium and magnesium ions in industrial water, which are analyzed through rheograms, zeta potential measurements, and molecular dynamics simulations. The results are interpreted as electrostatic interactions, steric phenomena, and cation solvation. This interpretation integrates experimental studies with microscopic analyses, employing molecular dynamics simulations to elucidate the underlying mechanisms. In all cases, a decrease in the yield stress of synthetic slurries is observed as the dosing of NaPA increases due to greater repulsion between tailings particles through an increase in electrostatic repulsion and larger steric forces that hinder agglomeration. However, efficiency is reduced in the presence of divalent cations as zeta potential measurements suggest a reduction in the electrical charges of the particles and the polymer, making its application more challenging. The differences obtained in the presence of calcium compared to magnesium are explained in terms of the solvation of these ions and their impact on the polymer conformation in solution and adsorption on the mineral surfaces. This explanation is reinforced by molecular dynamics studies, which indicate that polymer adsorption on minerals depends on the type of mineral and type of ion. Particularly for quartz, the highest adsorption of NaPA occurs in the presence of calcium, whereas for a kaolinite surface, the highest polymer adsorption is obtained in the presence of magnesium. The competitive effect of these phenomena leads to the rheological behavior of the tailings being dominated by the effects originating in the clay. [ABSTRACT FROM AUTHOR]

The combination of proteins with polysaccharides and polyphenols is expected to improve their physicochemical and functional properties. In this study, a novel plant-based antioxidant emulsifier was formed by soybean protein isolate (SPI), inulin (INU), and dihydromyricetin (DMY). Based on the binary system of SPI/INU, we focused on exploring the effect of the DMY concentration (0.5 mg/mL~2.5 mg/mL) on the formation and properties of the ternary complex. The structure, interaction mechanism, and interfacial and functional properties of the ternary complex were investigated. The results indicate that compared to the SPI/INU binary complex, the SPI/INU/DMY ternary complex had a significant decrease in particle size (~100 nm) and a slight decrease in absolute zeta potential. The SPI/INU binary complex with DMY mainly interacted by hydrogen bonding and hydrophobic interactions. Due to the incorporation of DMY, the structure of SI was denser and more flexible. The ternary complex exhibited an ideal three-phase contact angle and demonstrated better foaming and antioxidant ability. Additionally, compared to SPI/INU, the ternary complex had a significant improvement in EAI. These results provide a strategy for polyphenols to modify the structure, interfacial properties, and functions of protein/polysaccharide complexes. This provides a potential reference for the preparation of more ternary complexes with excellent emulsifying and antioxidant properties for application in emulsions. [ABSTRACT FROM AUTHOR]

Plant-based meat analogs (PBMAs) are promising sustainable food sources. However, their high moisture and protein contents make them prone to microbial deterioration, limiting their shelf life and sensory appeal. This study explored enhancing PBMAs' shelf life using nanoemulsions of Litsea cubeba and cinnamon essential oils, emulsified with chitosan and Tween 80. The composite nanoemulsion, produced through high-pressure homogenization, exhibited a droplet size of 4.99 ± 0.03 nm, a polydispersity index (PDI) of 0.221 ± 0.008, and a zeta potential of 95.13 ± 2.67 mV, indicating remarkable stability (p < 0.05). Applied to PBMAs stored at 4 °C, it significantly improved color and pH balance and reduced thiobarbituric acid reactive substances and cooking loss. Most notably, it inhibited the growth of Escherichia coli and Staphylococcus aureus, curbing spoilage and protein oxidation, thereby extending the products' shelf life and preserving sensory quality. As shown above, the encapsulation of LCEO/CEO in nanoemulsions effectively inhibits spoilage and deterioration in PBMAs, improving flavor and quality more than direct addition. Future studies should explore using various essential oils and emulsifiers, as well as alternative encapsulation techniques like microcapsules and nanoparticles, to further prevent PBMA deterioration. [ABSTRACT FROM AUTHOR]

In recent years, in addition to the positive effects of probiotics and prebiotics on health, increasing research has shown that postbiotics also have significant potential in the health field. Postbiotics are bioactive components produced by probiotic bacteria during fermentation and may exhibit antimicrobial activity. This study investigated the antimicrobial effects of liposomal postbiotics formulated in gel. Various postbiotic-containing liposomal systems have been developed and optimized to prepare formulations. Optimized liposomes and liposomal postbiotic-containing gel forms were examined in terms of particle size, polydispersity index, zeta potential, structural properties, encapsulation efficiency, permeability, release profiles, and stability. Finally, the antimicrobial activities of the postbiotics and the optimum gel formulation LG1 were evaluated on Pseudomonas aeruginosa, Staphylococcus aureus, Escherichia coli, Enterococcus hirae, and Candida albicans strains using disk diffusion and microdilution methods. The optimum liposome formulation L1 was determined to have a particle size of 185.32 ± 0.80 nm, a polydispersity index of 0.206 ± 0.012, a zeta potential of 35.0 ± 0.5 mV, and an encapsulation efficiency of 17.52%. Its permeability was determined as 51.52% at the end of 6 h. In vitro release studies showed that the drug release profile was in accordance with first-order kinetics and suitable for controlled release. The findings show that formulated postbiotics have similar antimicrobial activity to free postbiotics. These results suggest that liposomal gel formulations support the antimicrobial effects of postbiotics while providing advantages of use. In conclusion, the findings contribute to a better understanding of the antimicrobial potential of postbiotics and lipogelosomal postbiotics and optimize their use in pharmaceutical applications. [ABSTRACT FROM AUTHOR]

In this study, a new oleogel system was constructed and used as a fat substitute in the processing of cookies. The preparation process of Amomum villosum Lour. extract (AVE) was optimized based on antioxidant activity and yield firstly. Then, the AVE, ovalbumin, chitosan, and xanthan gum were used as raw materials to prepare a composite Pickering emulsion oleogel. The results showed that when the concentration of AVE, chitosan, and XG were 0.1%, 2.5%, and 0.3%, respectively, a stable and uniformly distributed Pickering emulsion oleogel was formed. In this case, the particle size of the composite oleogel was relatively small; the absolute value of zeta potential was higher; the microstructure was more stable, with less aggregation and flocculation; and the thermal stability and freeze–thaw stability were excellent. In addition, the addition of AVE enhanced the gel properties of the oleogel and had good solid-like properties, and strengthened the binding force, as well as the oxidation stability, making the whole system more stable. In addition, the results of the application of the composite oleogel in the cookies showed that the AVE–ovalbumin/xanthan gum/chitosan Pickering emulsion oleogel had similar sensory and texture properties to the butter group. The addition of AVE can delay the crispness, cohesiveness, hardness, and the rate of malondialdehyde formation in cookies during storage. In conclusion, the AVE–ovalbumin/xanthan gum/chitosan Pickering emulsion oleogel had good physicochemical stability and showed great potential in replacing saturated fat (butter) in baking products (cookies). [ABSTRACT FROM AUTHOR]

Protein adsorption behavior was examined on poly(N-isopropylacrylamide-co-sodium methacrylate)-based hydrogels at different temperatures: 5, 20, and 37 °C, and pH: 4.5, 7, and 9.2. The hydrogels, whose covalent skeleton contains pendant anionic units due to the presence of the sodium methacrylate co-monomer, exhibited both thermo- and pH-sensitivity with different extents, which depended on the content of ionizable moieties and the cross-linker density. The hydrogel composition, temperature, and pH influenced the zeta potential of the hydrogels and their swelling properties. The proteins selected for the study, i.e., bovine serum albumin (BSA), ovalbumin (OVA), lysozyme (LYZ), and a monoclonal antibody (mAb2), differed in their aminoacidic composition and conformation, thus in isoelectric point, molecular weight, electrostatic charge, and hydrophobicity. Therefore, the response of their adsorption behavior to changes in the solution properties and the hydrogel composition was different. LYZ exhibited the strongest adsorption of all proteins with a maximum at pH 7 (189.5 m g   g g e l − 1 ); adsorption of BSA and OVA reached maximum at pH 4.5 (24.4 and 23.5 m g   g g e l − 1 ), whereas mAb2 was strongly adsorbed at 9.2 (21.7 m g   g g e l − 1 ). This indicated the possibility of using the hydrogels for pH-mediated separation of proteins differing in charge under mild conditions in a water-rich environment of both the liquid solution and the adsorbed phase. The adsorption affinity of all proteins increased with temperature, which was attributed to the synergistic effects of attractive electrostatic and hydrophobic interactions. That effect was particularly marked for mAb2, for which the temperature change from 5 to 37 °C caused a twentyfold increase in adsorption. In all cases, the proteins could be released from the hydrogel surface by a reduction in temperature, an increase in pH, or a combination of both. This allows for the elimination of the use of salt solution as a desorbing agent, whose presence renders the recycling of buffering solutions difficult. [ABSTRACT FROM AUTHOR]

The objective of this study was to develop two lipid nanoparticle (LNP) formulations capable of efficiently expressing a reporter mRNA while co-delivering the anti-inflammatory drug dexamethasone (DX) to reduce inflammatory side effects in protein replacement therapies. Two types of LNPs were developed, in which 25% of cholesterol was replaced by DX. These LNPs contained either 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC) or 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE) as a helper lipid. The resulting LNPs exhibited high stability, homogeneity, and near-neutral Zeta potentials. SAXS experiments confirmed DX incorporation into the LNP core, with slow in vitro DX release observed over 48 h. The LNPs achieved high mRNA encapsulation efficiency (95–100%) and effectively transfected HepG2 cells, dendritic cells, and hPBMCs. While LNPs increased cytokine release (IL-1β, TNF-α, MCP-1), LNPs-DX significantly reduced cytokine levels, demonstrating enhanced anti-inflammatory properties while maintaining mRNA expression levels. In vivo biodistribution showed predominant liver localization post-intramuscular injection, regardless of the DSPC or DOPE composition. LNPs co-loaded with mRNA and DX are promising candidates for continuous protein replacement. Due to their ability to reduce treatment-related inflammation while maintaining significant mRNA expression levels, these LNPs are perfectly suited for the treatment of liver-related metabolic diseases. [ABSTRACT FROM AUTHOR]

This study aimed to create Pickering emulsions with varying oil fractions and assess the impact of ultrasonic treatment on the properties of Whey Protein Isolates (WPIs). At 640 W for 30 min, ultrasound reduced WPI aggregate size, raised zeta potential, and improved foaming, emulsifying, and water-holding capacities. FTIR analysis showed structural changes, while fluorescence and hydrophobicity increased, indicating tertiary structure alterations. This suggests that sonication efficiently modifies WPI functionality. Under ideal conditions, φ = 80 emulsions were most stable, with no foaming or phase separation. Laser scanning revealed well-organized emulsions at φ = 80. This study provides a reference for modifying and utilizing WPI. [ABSTRACT FROM AUTHOR]

In addition to bubble–particle interaction, particle–particle interaction also has a significant influence on mineral flotation. Fine particles that coat the mineral surface prevent direct contact with collectors and/or air bubbles, thereby lowering flotation recovery. Calculating the particle interaction energy can help in evaluating the interaction behavior of particles. In this study, the floatability of coarse ilmenite (−151 + 74 μm) and different particle sizes (−45 + 25, −25 + 19, −19 μm) of forsterite with NaOL as a collector was investigated. The results showed that forsterite sizes of −45 + 25 and −25 + 19 μm had no effect on the ilmenite floatability, whereas −19 μm forsterite significantly reduced ilmenite floatability. A particle size analysis of artificially mixed minerals and a scanning electron microscopy (SEM) analysis of the flotation products showed that heterogeneous aggregation occurred between ilmenite and −19 μm forsterite particles. The extended DLVO (Derjaguin–Landau–Verwey–Overbeek) theory was applied to calculate the interaction energy between mineral particles using data from zeta potential and contact angle measurements. The results showed that the interaction barriers between ilmenite (−151 + 74 μm) and forsterite (−45 + 25, −25 + 19, and −19 μm) were 11.94 × 103 kT, 8.23 × 103 kT and 4.09 × 103 kT, respectively. Additionally, the interaction barrier between forsterite particles smaller than 19 μm was 0.51 × 103 kT. The strength of the barrier decreased as the size of the forsterite decreased. Therefore, fine forsterite particles and aggregated forsterite can easily overcome the energy barrier, coating the ilmenite particle surface. This explains the effect of different forsterite sizes on the floatability of ilmenite and the underlying mechanism of particle interaction. [ABSTRACT FROM AUTHOR]

A new type of amino acid surfactant, lauroyl lysine (LL), is used as a green collector for the low-temperature flotation of quartz. The micro-flotation test results indicate that, under flotation conditions of 10–40 °C, pH = 11.0, 20 mg/L CaCl2, and 60 mg/L LL, the highest recovery of quartz by LL could reach up to 97.08%. The temperature at which flotation occurs little impacts LL collection efficiency. In contrast, sodium oleate (NaOL) gives inferior performance to LL at all tested temperatures. The adsorption measurement and SEM-EDS results confirm that a quantity of LL is absorbed onto the quartz surface at low temperatures. Investigations into the interaction between the reagents and mineral surfaces are conducted using X-ray photoelectron spectroscopy (XPS) analysis, zeta potential measurements, and Fourier transform infrared (FT-IR) spectra. Findings indicate that LL is adsorbed onto the quartz surface through hydrogen bonds and intense chemisorption. Additionally, the amide groups in the LL molecular structure increase the solubility of the collector at low temperatures, and simultaneously, the amide bond can form an intermolecular hydrogen bond between O and H, which is conducive to quartz flotation. [ABSTRACT FROM AUTHOR]

(1) Background: Methyl jasmonate-treated D. morbifera adventitious root extract (MeJA-DMARE), enriched with phenolics, has enhanced bioactivities. However, phenolics possess low stability and bioavailability. Substantial evidence indicates that plant extract–phospholipid complex assemblies, known as phytosomes, represent an innovative drug delivery system. (2) Methods: The phytosome complex was created by combining MeJA-DMARE with Soy-L-α-phosphatidylcholine (PC) using three different ratios through two distinct methods (co-solvency method: A1, A2, and A3; thin-layer film method: B1, B2, and B3). (3) Results: Initial evaluation based on UV-Vis, entrapment efficiency (EE%), and loading content (LC%) indicated that B2 exhibited the highest EE% (79.98 ± 1.45) and LC% (69.17 ± 0.14). The phytosome displayed a spherical morphology with a particle size of 210 nm, a notably low polydispersity index of 0.16, and a superior zeta potential value at −25.19 mV. The synthesized phytosome exhibited superior anti-inflammatory activities by inhibiting NO and ROS production (reduced to 8.9% and 55.1% at 250 μg/mL) in RAW cells and adjusting the expression of related inflammatory cytokines; they also slowed lung tumor cell migration (only 2.3% of A549 cells migrated after treatment with phytosomes at 250 μg/mL), promoting ROS generation in A549 cell lines (123.7% compared to control) and stimulating apoptosis of lung cancer-related genes. (4) Conclusions: In conclusion, the MeJA-DMARE phytosome offers stable, economically efficient, and environmentally friendly nanoparticles with superior inflammation and lung tumor inhibition properties. Thus, the MeJA-DMARE phytosome holds promise as an applicable and favorable creation for drug delivery and lung cancer treatment. [ABSTRACT FROM AUTHOR]

Objectives: Oral insulin delivery has received much attention over the past 20 years due to its high compliance. The aim of this study is to prepare nanoparticles for the oral delivery of insulin; Methods: Fucoidan and protamine were used to prepare a pH-sensitive nanoparticle via self-assembly. The secondary structure and in vitro stability of the nanoparticles were characterized using FTIR, XRD, ITC, and TEM. the nanoparticles had a controlled release effect on insulin in simulated intestinal fluid. The pre-liminary therapeutic effect on high-fat-fed type 2 diabetic mice; Results: When the fucoidan/protamine mass ratio was 10:3 (w/w), the particle size and zeta potential were 140.83 ± 1.64 nm and −48.13 ± 0.61 mV.The encapsulation efficiency of insulin was 62.97 ± 0.59%. The preliminary therapeutic effect on type 2 diabetic mice showed that the fasting blood glucose of diabetic mice decreased from 10.28 ± 0.88 mmol/L to 9.22 ± 0.64 mmol/L, the area under the curve value of oral glucose tolerance test was reduced by 11.70%, and the insulin se-cretion of diabetic mice was increased by 13.3%; Conclusions: The nanoparticles were prepared successfully by self-assembly. The empty and insulin-loaded nanoparticles remained stable in simulated gastric fluid, and the nanoparticles had a controlled release effect on insulin in simulated intestinal fluid. Moreover, insulin-loaded nanoparticles could relieve on type 2 diabetic mice. [ABSTRACT FROM AUTHOR]

Background/Objectives: Phloroglucinol (PHL), a phenolic compound extracted from the brown alga Rosenvingea intricata, exhibits potent antioxidant and anticancer properties. This study aims to extract, purify, and characterize PHL, and further develop functionalized zinc oxide nanoparticles (ZnO NPs) loaded with PHL to enhance its therapeutic potential. Methods: PHL was extracted using acetone and purified through Sephadex LH-20 column chromatography, yielding a highly enriched fraction (F-3). The purified compound was characterized by FTIR, HPLC, NMR, and LC-MS. ZnO NPs were synthesized, PEGylated, and conjugated with PHL, forming ZnO-PEG-PHL NPs. Their characterization included DLS, zeta potential, XRD, SEM-EDAX, and encapsulation efficiency studies. Antioxidant assays (DPPH, FRAP, ABTS, RPA) were performed and in vitro cytotoxicity on A549 lung cancer cells were determined to evaluate the therapeutic efficacy of PHL. Results: The purified PHL fraction showed a high phenolic content (45.65 PHL mg/g), which was was confirmed by spectral analysis. The ZnO-PEG-PHL NPs increased in size from 32.36 nm to 46.68 nm, with their zeta potential shifting from −37.87 mV to −26.82 mV. The antioxidant activity was superior for the ZnO-PEG-PHL NPs in all assays, while the in vitro cytotoxicity tests showed an IC50 of 40 µg/mL compared to 60 µg/mL for the ZnO NPs and 70 µg/mL for PHL. Apoptotic studies revealed significant cell cycle arrest and apoptosis induction. Conclusions: The synthesized ZnO-PEG-PHL NPs demonstrated enhanced antioxidant and anticancer properties, making them promising candidates for cancer therapy and antioxidant applications. [ABSTRACT FROM AUTHOR]

Background: Gliadins have aroused significant interest in the last decade as suitable biomaterials for food and pharmaceutical applications. In particular, the oral route is the preferred method of administration for gliadin-based formulations, due to the affinity of this biomaterial for the gut mucosa. However, up to now, this has been demonstrated only by means of in vivo or ex vivo studies. Methods: This is why, in this study, various in vitro techniques were employed in order to evaluate the ability of polymeric nanoparticles, made up of a commercial grade of the protein and an etheric surfactant, to interact with porcine gastric mucin. The nanosystems were also used for the encapsulation of thiamine hydrochloride, used as a model of a micronutrient. Results: The resulting systems were characterized by a mean diameter of ~160–170 nm, a narrow size distribution when 0.2–0.6 mg/mL of thiamine was used, and an encapsulation efficiency between 30 and 45% of the drug initially employed. The incubation of the gliadin nanosystems with various concentrations of porcine gastric mucin evidenced the ability of the carriers to interact with the mucus glycoprotein, showing a decreased Zeta potential after a 4 h incubation (from ~−30 to −40 mV), while demonstrating that the encapsulation of the drug did not affect its bioadhesive features. Conclusions: Altogether, these data support the conceivable application of gliadin nanoparticles as formulations for the oral administration of bioactive compounds. [ABSTRACT FROM AUTHOR]

Background/Objectives: Metformin (Met), an oral drug used to treat type II diabetes, is known to control blood glucose levels. Metformin carbon quantum dots (MetCQDs) were prepared to enhance the bioavailability and effectiveness of metformin. Several studies have shown that carbon quantum dots (CQDs) have attractive properties like small particle size, high penetrability, low cytotoxicity, and ease of synthesis. CQDs are made from a carbon source, namely, citric acid, and a heteroatom, such as nitrogen. The active molecule can be a carbon source or a heteroatom, as reported here. Methods: This study aims to produce MetCQDs from an active molecule. MetCQDs were successfully produced by microwave-based production methods and characterized. The effect of the MetCQDs was tested in Wistar albino rats following a Streptozocin-induced diabetic model. Results: The results show that the products have a particle size of 9.02 ± 0.04 nm, a zeta potential of −10.4 ± 0.214 mV, and a quantum yield of 15.1 ± 0.045%. Stability studies and spectrophotometric analyses were carried out and the effectiveness of MetCQDs evaluated in diabetic rats. The results show a significant reduction in blood sugar levels (34.1–51.1%) compared to the group receiving only metformin (37.1–55.3%) over a period of 30 to 360 min. Histopathological examinations of the liver tissue indicate improvement in the liver health indicators of the group treated with MetCQDs. Conclusions: Based on these results, the products have potential therapeutic advantages in diabetes management through their increased efficacy and may have reduced side effects compared to the control group. [ABSTRACT FROM AUTHOR]

Background: Cancer is one of the most significant threats to human health. Following surgical excision, chemotherapy is an effective strategy against remaining cancer cells. 4-hexylresorcinol (4-HR) has anti-cancer properties and exhibits hydrophobicity-induced aggregation in the blood that has trouble with targeted tumor delivery and cellular uptake of the drug. The purpose of this study is to encapsulate 4-HR into solid lipid nanoparticles (SLNs) to enhance its anti-cancer effect by avoiding aggregation and facilitating cellular uptake. Methods: 4-HR SLNs were prepared via hot melt homogenization with sonication. SLN characteristics were assessed by analyzing particle size, zeta potential, and drug release. Cytotoxicity, as an indicator of the anti-cancer effect, was evaluated against HeLa (cervical cancer in humans), A549 (lung cancer in humans), and CT-26 (colon carcinoma in mice) cell lines. Results: Particle size ranged from 169.4 to 644.8 nm, and zeta potential ranged from −19.8 to −40.3 mV, which are conducive to cellular uptake. Entrapment efficiency (EE) of 4-HR was found to be 75.0—96.5%. The cytotoxicity of 4-HR-loaded SLNs demonstrated enhanced anti-cancer effects compared to pure 4-HR. The enhancement of anti-cancer effects depended on reduced particle size based on cellular uptake, the EE, and the cell type. Conclusions: These findings imply that 4-HR-loaded SLN is a promising strategy for chemotherapy in cancer treatment. [ABSTRACT FROM AUTHOR]

Ultrasonic technology has drawn extensive interests for its great potential in marine antifouling applications. However, its effects on the adhesion behavior of marine fouling organisms on marine structures remain underexplored. This work investigated how ultrasonic treatment impacted the adhesion of Pseudoalteromonas on a gel-like marine epoxy primer. And the process parameters for ultrasonic treatment were optimized using response surface analysis with Design-Expert software 11. The results revealed that ultrasonic treatment disrupted the cellular structure of Pseudoalteromonas, causing the deformation and fragmentation of the cell membrane, leading to bacterial death. Additionally, ultrasonic treatment reduced the particle size and Zeta potential value of Pseudoalteromonas, which disrupted the stability of bacterial suspensions. It also increased the relative surface hydrophobicity of Pseudoalteromonas cells, resulting in a reduction in adhesion to the gel-like marine epoxy primer. This study demonstrated that ultrasonic treatment significantly disturbed the adhesion behavior of microorganisms like Pseudoalteromonas on the gel-like marine epoxy primer, which provided an effective approach for controlling marine biofouling. [ABSTRACT FROM AUTHOR]

Curcumin (Cur), the primary curcuminoid found in Curcuma longa L., has garnered significant attention for its potential anti-inflammatory and antibacterial properties. However, its hydrophobic nature significantly limits its bioavailability. Additionally, adipose-derived stem cells (ADSCs) possess immunomodulatory properties, making them useful for treating inflammatory and autoimmune conditions. This study aims to verify the efficacy of poly(ε-caprolactone) nanocapsules (NCs) in improving Cur's bioavailability, antibacterial, and immunomodulatory activities. The Cur-loaded nanocapsules (Cur-NCs) were characterized for their physicochemical properties (particle size, polydispersity index, Zeta potential, and encapsulation efficiency) and stability over time. A digestion test simulated the behavior of Cur-NCs in the gastrointestinal tract. Micellar phase analyses evaluated the Cur-NCs' bioaccessibility. The antibacterial activity of free Cur, NCs, and Cur-NCs against various Gram-positive and Gram-negative strains was determined using the microdilution method. ADSC viability, treated with Cur-NCs and Cur-NCs in the presence or absence of lipopolysaccharide, was analyzed using the 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyl tetrazolium bromide assay. Additionally, ADSC survival was assessed through the Muse apoptotic assay. The expression of both pro-inflammatory (interleukin-1β and tumor necrosis factor-α) and anti-inflammatory (IL-10 and transforming growth factor-β) cytokines on ADSCs was evaluated by real-time polymerase chain reaction. The results demonstrated high stability post-gastric digestion of Cur-NCs and elevated bioaccessibility of Cur post-intestinal digestion. Moreover, Cur-NCs exhibited antibacterial activity against Escherichia coli without affecting Lactobacillus growth. No significant changes in the viability and survival of ADSCs were observed under the experimental conditions. Finally, Cur-NCs modulated the expression of both pro- and anti-inflammatory cytokines in ADSCs exposed to inflammatory stimuli. Collectively, these findings highlight the potential of Cur-NCs to enhance Cur's bioavailability and therapeutic efficacy, particularly in cell-based treatments for inflammatory diseases and intestinal dysbiosis. [ABSTRACT FROM AUTHOR]

Cordyceps militaris grown on germinated Rhynchosia nulubilis (GRC) exerts various biological effects, including anti-allergic, anti-inflammatory, and immune-regulatory effects. In this study, we investigated the anti-inflammatory effects of GRC encapsulated in chitosan nanoparticles (CN) against particulate matter (PM)-induced lung inflammation. Optimal CN (CN6) (CHI: TPP w/w ratio of 4:1; TPP pH 2) exhibited a zeta potential of +22.77 mV, suitable for GRC encapsulation. At different GRC concentrations, higher levels (60 and 120 mg/mL) led to increased negative zeta potential, enhancing stability. The optimal GRC concentration for maximum entrapment (31.4 ± 1.35%) and loading efficiency (7.6 ± 0.33%) of GRC encapsulated in CN (GCN) was 8 mg/mL with a diameter of 146.1 ± 54 nm and zeta potential of +30.68. In vivo studies revealed that administering 300 mg/kg of GCN significantly decreased the infiltration of macrophages and T cells in the lung tissues of PM-treated mice, as shown by immunohistochemical analysis of CD4 and F4/80 markers. Additionally, GCN ameliorated PM-induced lung tissue damage, inflammatory cell infiltration, and alveolar septal hypertrophy. GCN also decreased total cells and neutrophils, showing notable anti-inflammatory effects in the bronchoalveolar lavage fluid (BALF) from PM-exposed mice, compared to GRC. Next the anti-inflammatory properties of GCN were further explored in PM- and LPS-exposed RAW264.7 cells; it significantly reduced PM- and LPS-induced cell death, NO production, and levels of inflammatory cytokine mRNAs (IL-1β, IL-6, and COX-2). GCN also suppressed NF-κB/MAPK signaling pathways by reducing levels of p-NF-κB, p-ERK, and p-c-Jun proteins, indicating its potential in managing PM-related inflammatory lung disease. Furthermore, GCN significantly reduced PM- and LPS-induced ROS production. The enhanced bioavailability of GRC components was demonstrated by an increase in fluorescence intensity in the intestinal absorption study using FITC-GCN. Our data indicated that GCN exhibited enhanced bioavailability and potent anti-inflammatory and antioxidant effects in cells and in vivo, making it a promising candidate for mitigating PM-induced lung inflammation and oxidative stress. [ABSTRACT FROM AUTHOR]

This study introduces novel CD44-targeted and redox-responsive nanoparticles (FNPs), proposed as doxorubicin (DOX) delivery devices for breast cancer. A cationized and redox-responsive Human Serum Albumin derivative was synthesized by conjugating Human Serum Albumin with cystamine moieties and then ionically complexing it with HA. The suitability of FNPs for cancer therapy was assessed through physicochemical measurements of size distribution (mean diameter of 240 nm), shape, and zeta potential (15.4 mV). Nanoparticles possessed high DOX loading efficiency (90%) and were able to trigger the drug release under redox conditions of the tumor environment (55% release after 2 h incubation). The use of the carrier increased the cytotoxic effect of DOX by targeting the CD44 protein. It was shown that, upon loading, the cytotoxic effect of DOX was enhanced in relation to CD44 protein expression in both 2D and 3D models. DOX@FNPs significantly decrease cellular metabolism by reducing both oxygen consumption and extracellular acidification rates. Moreover, they decrease the expression of proteins involved in the oxidative phosphorylation pathway, consequently reducing cellular viability and motility, as well as breast cancer stem cells and spheroid formation, compared to free DOX. This new formulation could become pioneering in reducing chemoresistance phenomena and increasing the specificity of DOX in breast cancer patients. [ABSTRACT FROM AUTHOR]

Communication between the different layers of the cornea (epithelium and stroma) is a complex, yet crucial element in the corneal healing process. Upon corneal injury, it has been reported that the bi-directional cross talk between the epithelium and stroma via the vesicular secretome, namely, extracellular vesicles (EVs), can lead to accelerated wound closure upon injury. However, the distinct protein markers of EVs derived from human corneal epithelial (HCE) cells, keratocytes (HCKs), fibroblasts (HCFs), and myofibroblasts (HCMs) remain poorly understood. All EVs were enriched for CD81 and showed increased expression levels of ITGAV and FN1 in HCM-EVs compared to HCE- and HCF-EVs. All EVs were negative for GM130 and showed minimal differences in biophysical properties (particle concentration, median particle size, and zeta potential). At the proteomic level, we show that HCM-EVs are enriched with proteins associated with fibrosis pathways, such as COL6A1, COL6A2, MMP1, MMP2, TIMP1, and TIMP2, compared to HCE-, HCK-, and HCF-EVs. Interestingly, HCE-EVs express proteins involved with the EIF-2 signaling pathway (stress-induced signals to regulate mRNA translation), such as RPS21, RALB, EIF3H, RALA, and others, compared to HCK-, HCF-, and HCM-EVs. In this study, we isolated EVs from cell-conditioned media from HCE, HCKs, HCFs, and HCMs and characterized their biophysical and protein composition by Western blot, nanoparticle tracking analysis, and proteomics. This study supports the view that EVs from the corneal epithelium and stroma have a distinct molecular composition and may provide novel protein markers to distinguish the difference between HCE-, HCK-, HCF-, and HCM-EVs. [ABSTRACT FROM AUTHOR]

A lanthanum–cerium-based abrasive composed of CeO2, LaOF, and LaF3 was commercially obtained. The effect of sodium hexametaphosphate (SHMP) on powder dispersion behavior was systematically investigated using the combined techniques of liquid contact angle, turbidity, zeta potential (ZP), scanning electron microscopy (SEM), powder X-ray diffraction (XRD) combined with Rietveld refinements, X-ray photoelectron spectroscopy (XPS), and polishing tests. The results indicated that the addition of 0.5 wt.% SHMP dispersant to the 5 wt.% lanthanum–cerium-based slurry produced the most stable suspension with a high turbidity of 2715 NTU and a low wetting angle of 45°. The as-obtained slurry displayed good surface polishing quality for K9 glass, with low surface roughness (Ra) of 0.642 and 0.515 nm (in the range of 979 × 979 μm2) at pH = 6 and 11, respectively, which corresponds to the fact that it has local maximum absolute values of ZP at these two pH values. SEM images demonstrated that after appropriate grafting of SHMP, the particle aggregation was reduced and the slurry's dispersion stability was improved. In addition, the dispersion mechanism was explained based on the principle of complexation reaction, which reveals that the dispersant SHMP can increase the interparticle steric hindrance and electrostatic repulsions. In an acidic environment, steric hindrance dominates, while electrostatic repulsion prevails under alkaline conditions. As expected, this polishing slurry may find potential applications in manufacturing optical devices and integrated circuits. [ABSTRACT FROM AUTHOR]

To ascertain the effects of conventional hydrochemical components on the presence of endogenous fine loess particles (EFLPs) in groundwater over loess regions, Na+, NO3− and Cu2+, as conventional hydrochemical components, were employed in batch tests with EFLPs from a typical loess as aquifer media in Guanzhong Plain, China. The results showed that EFLPs had high zeta potential (ζ) and remained suspended over 40 h, indicating their good dispersity and potential to be suspended in groundwater. ζ was employed to replace electrostatic repulsion in the DLVO equation to determine the critical coagulation concentrations for Cu(NO3)2 and NaF as 0.1 mmol/L and 50 mmol/L for 1.1 µm D50 EFLPs, which were almost consistent with the batch test results and greater than those in the groundwater, respectively, further implying that EFLPs are likely to be suspended in groundwater. The multi-factor tests showed that the key factors including particle size, hydro-chemical component and concentration interacted with each other and their relative magnitudes varied in the test processes, where the effects of concentration strengthened while those of the component weakened. So, hydrogeochemical conditions were beneficial to the suspension of EFLPs and the benefit got strong along the groundwater flow path, which is conducive to the cotransport of EFLPs with pollutants in groundwater over loess regions. [ABSTRACT FROM AUTHOR]

Essential oils (EOs) have antimicrobial properties, but their low solubility in water and strong flavor pose challenges for direct incorporation into food, as they can negatively impact organoleptic properties. To overcome these issues, strategies such as oil-in-water (O/W) nanoemulsions have been developed to improve EO dispersion and protection while enhancing antimicrobial efficacy. The objective of this study was to create sodium alginate-pink pepper essential oil (PPEO) nanoemulsions using microfluidization. Various formulations were assessed for physicochemical, physical, and antimicrobial properties to evaluate their potential in food applications. The microfluidized emulsions and nanoemulsions had droplet sizes ranging from 160 to 443 nm, polydispersity index (PdI) ranging from 0.273 to 0.638, and zeta potential (ζ) ranging from −45.2 to 66.3 mV. The nanoemulsions exhibited Newtonian behavior and remarkable stability after 20 days of storage. Antimicrobial testing revealed effectiveness against Staphylococcus aureus and Listeria monocytogenes, with minimum inhibitory concentrations (MIC) of 200 µg/mL for both microorganisms and minimum bactericidal concentrations (MBC) of 800 µg/mL and 400 µg/mL, respectively, proving that encapsulation of PPEO in nanoemulsions significantly increased its antibacterial activity. These results present the possibility of using PPEO nanoemulsions as a more effective natural alternative to synthetic preservatives in food systems. [ABSTRACT FROM AUTHOR]

Objective: An eucalyptus essential oil-based nanoemulsion was produced and evaluated for its antimicrobial properties against Streptococcus mutans and its cytotoxicity in the surface mucous cells of rabbits. Methods: The essential oil-based nanoemulsion was synthesized with two species of eucalyptus—Eucalyptus citriodora and Eucalyptus globulus—followed by physicochemical characterization and the determination of antimicrobial activity and cell viability. Subsequently, the mouthwash formulations (fluoride and fluoride-free) were functionalized with the nanoemulsion, and their in vitro antimicrobial actions were evaluated against S. mutans. Results: The nanoemulsion presented an average particle size of around 100 nm, a polydispersity index close to 0.3, a zeta potential between −19 and −30 mV, a pH close to 7, a spherical shape, and a cell viability above 50%. The antimicrobial activity analysis showed that the nanoemulsion was effective in the control of S. mutans. The mouthwashes functionalized with the nanoemulsion also presented bacteriostatic and bactericidal properties. Conclusions: The bio-based material produced with eucalyptus essential oil presented adequate physicochemical characteristics, with the potential to be used as an innovative material in preventive dentistry, contributing to the maintenance of oral and systemic health. [ABSTRACT FROM AUTHOR]

In this study, amino-functionalized magnetic particles (iron oxide@SiO2-NH2) with core-shell structures were synthesized and evaluated for rapid boron removal from aqueous solutions. The results showed that the specific surface area of the iron oxide@SiO2-NH2 (131.24 m2⋅g−1) increased greatly compared to pure iron oxide (30.98 m2⋅g−1). The adsorption equilibrium was less than 2 h, with an adsorption capacity of 29.76 mg⋅g−1 at pH = 6 at 15 °C. The quasi-second-order kinetic model described the boron adsorption process well, and both the Langmuir and Freundlich models were suitable for characterizing the adsorption isotherms. The zeta potential and XPS analysis before and after adsorption revealed that the main adsorption mechanism was the hydrogen bonding formation between the terminal -NH2 groups of the adsorbent and the boric acid. In addition, the adsorbent still maintained a high adsorption performance after five adsorption–desorption cycles, which illustrated that the iron oxide@SiO2-NH2 may be a potential adsorbent for environmental boron removal treatment. [ABSTRACT FROM AUTHOR]

(1) Background: The present study aimed to assess the antifungal effectiveness of a topical innovative formulation containing the association of an antifungal agent, voriconazole (VCZ), and the essential oil of Pinus sylvestris L. (PSEO). (2) Methods: Pseudo-ternary phase diagram and D-optimal mixture design approaches were applied for the development and the optimization of the o/w nanoemulsion. The optimized formulation (NE) was subjected to physicochemical characterization and to physical stability studies. In vitro permeation studies were carried out using the Franz cell diffusion system. The antimycotic efficacy against Microsporum canis was carried out in vitro. (3) Results: Optimal nanoemulsion showed great physical stability and was characterized by a small droplet size (19.015 nm ± 0.110 nm), a PDI of 0.146 ± 0.011, a zeta potential of −16.067 mV ± 1.833 mV, a percentage of transmittance of 95.352% ± 0.175%, and a pH of 5.64 ± 0.03. Furthermore, it exhibited a significant enhancement in apparent permeability coefficient (p < 0.05) compared to the VCZ free drug. Finally, NE presented the greatest antifungal activity against Microsporum canis in comparison with VCZ and PSEO tested alone. (4) Conclusions: These promising results suggest that this topical innovative formulation could be a good candidate to treat onychomycosis. Further ex vivo and clinical investigations are needed to support these findings. [ABSTRACT FROM AUTHOR]

Ethanolic cashew leaf extract (ECL-E) is rich in phenolic compounds and shows remarkable antioxidative and antimicrobial activities. Encapsulation could stabilize ECL-E as the core. Tripolyphosphate (TPP)–chitosan (CS) nanoparticles were used to load ECL-E, and the resulting nanoparticles were characterized. The nanoparticles loaded with ECL-E at different levels showed differences in encapsulation efficiency (47.62–89.47%), mean particle diameters (47.30–314.60 nm), positive zeta potentials (40.37–44.24 mV), and polydispersity index values (0.20–0.56). According to scanning electron micrographs, the nanoparticles had a spherical or ellipsoidal shape, and a slight agglomeration was observed. The appropriate ratio of CS/ECL-E was 1:3, in which an EE of 89.47%, a particle size of 256.05 ± 7.70 nm, a zeta potential of 40.37 ± 0.66 mV, and a PDI of 0.22 ± 0.05 were obtained. The nanoparticles also exhibited high antioxidant activities, as assayed by DPPH and ABTS radical scavenging activities, ferric reducing ability power (FRAP), and oxygen radical absorbance capacity (ORAC). Low minimum inhibitory concentration and minimum bactericidal concentration were observed against Pseudomonas aeruginosa (9.38, 75.00 mg/mL) and Shewanella putrefaciens (4.69, 75.00 mg/mL). In addition, ECL-E loaded in nanoparticles could maintain its bioactivities under various light intensities (1000–4000 Lux) for 48 h. Some interactions among TPP, CS, and ECL-E took place, as confirmed by FTIR analysis. These nanoparticles had the increased storage stability and could be used for inactivating spoilage bacteria and retarding lipid oxidation in foods. [ABSTRACT FROM AUTHOR]

Coal water slurry (CWS) has been considered a cleaner and sustainable alternative to coal. However, the challenging suspension of coal particles in CWS has created a major obstacle to its use in industry. This study presents a novel approach to enhance the stability and rheological properties of coal water slurry (CWS) through the utilization of carboxyalkylated lignin (CL) as a dispersant. The generated CL samples had high water solubility of around 9 g/L and a charge density of around 2 mmol/g. All CLs were able to stabilize the coal suspension, and their performance decreased due to the increase in the alkyl chain length of carboxyalkylated lignin. Carboxymethylated lignin (CL-1) improved the stability of the coal suspensions with the lowest instability index of less than 0.6. The addition of CLs reduced the contact angle of the coal surface from 45.3° to 34.6°, and the increase in the alkyl chain length hampered its effect on contact angle changes. The zeta potential measurements confirmed that the adsorption of CL enhanced the electrostatic repulsion between coal particles in suspensions, and the zeta potential decreased with the increased alkyl chain length of CLs due to increased steric hindrance. The rheology results indicated that CLs demonstrated shear thinning behavior. This innovative method showcases the affinity of carboxyalkylated lignin to improve the performance of CWS, offering an environmentally friendly alternative for producing a cleaner product, i.e., sustainable coal water slurry, with improved suspension stability. [ABSTRACT FROM AUTHOR]

Ca- and Cu-decorated TiO2 microparticles are titanium dioxide nanoparticles that have been decorated with calcium and copper ions. TiO2, CaO, and CuO are low-cost, non-toxic, and non-hazardous materials. The aim of the present study was the physicochemical characterization of Ca- and Cu-decorated TiO2 microparticles and the evaluation of their antimicrobial activity. Thus, Ca2+ and Cu2+ species were incorporated onto TiO2 surfaces by a two-step wet method. The obtained TiO2-CaO-CuO composites were characterized by several experimental techniques. The electronic structure and charge properties of the composites were investigated by density functional theory calculations. Furthermore, the composites were successfully tested for inhibitory effects on Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli, and Candida albicans standard strains. The zeta potential data indicate that the physiological condition of investigated microbial strains was strongly affected in presence of a dispersion of 10 μg/L of composites in a saline phosphate buffer also, the recorded SEM images show a damaged microbial cell surface in the presence of composites. [ABSTRACT FROM AUTHOR]

The increase in environmental pollution due to the development of industry and human activity has resulted in intensive development of research on the possibility of its purification. A very effective method is the pollutants' adsorption from the air and water environment. For adsorption to be effective, materials with a specific structure and a well-developed surface decorated with numerous functionalities, e.g., biocarbons (BC), are necessary. An effective method of activating biocarbons is mechanochemical milling, an environmentally friendly procedure. This paper describes the possibility of using mechanochemical activation (MChA) of non-porous biocarbons to develop surface and porosity for their use in processes of pollutant adsorption. BC was characterized based on N2 adsorption, thermogravimetry (TGA), SEM/EDS imaging, Fourier (ATR-FTIR) and Raman spectroscopies, as well as titration using the Boehm method and determination of zeta potential. The adsorption capacity of BC for methylene blue (MB) was studied. It was proven that the solvent-free MChA made it possible to obtain microporous biocarbons, causing an intensive increase in the surface area and pore volume and the generation of oxygen functionalities. The biocarbons had predominantly acidic (mainly carboxylic) or basic functionalities and exhibited an amorphous structure. BC proved to be effective in adsorbing MB from aqueous solutions. [ABSTRACT FROM AUTHOR]

Solid lipid nanoparticles (SLNs) incorporated with retinol and oligopeptide can have a full spectrum of effects on the skin as a compatible combination of ingredients with broad anti-aging properties. The research's main objective was to ensure the stability of lipid nanocarriers containing retinol and peptide due to the planned use of this dispersion as a cosmetic raw material. To confirm the effectiveness of method optimization (high shear homogenization, HSH) and proper selection of substrates, SLN dispersions were obtained in three combinations: 1—non-incorporated SLNs; 2—SLNs containing only retinol; 3—SLNs containing retinol and pentapeptide-18; these were then stored at different temperatures (4, 25, 45 °C) for 4 weeks. The desired values of the physicochemical parameters of the optimized dispersion of lipid nanoparticles incorporated with retinol and oligopeptide over the required storage period were confirmed: mean particle size (Z-Ave) = 134.7 ± 0.3 nm; polydispersity index (PDI) = 0.269 ± 0.017 [−]; zeta potential (ZP) = 42.7 ± 1.2 mV (after 4 weeks at 25 °C). The results confirmed the proper selection of the SLN production method and the effectiveness of the optimization performed. The possibility of using the obtained raw material as an ingredient in cosmetic products with anti-aging properties was indicated. [ABSTRACT FROM AUTHOR]

This study investigates the impact of substituting lactose with maltodextrin in milk–tea formulations to enhance their physicochemical and structural properties. Various lactose-to-maltodextrin ratios (100:0, 90:10, 85:15, 80:20, 75:25) were evaluated in both post-pasteurized and concentrated skim milk–tea (SM-T) and whole milk–tea (WM-T) formulations. Concentration significantly improved the zeta potential, pH, and browning index in both SM-T and WM-T compared to pasteurization. L:M ratios of 90:10 and 75:25 in WM-T and 90:10 and 80:20 in SM-T showed higher phenolic preservation after concentration due to structural changes resulting from the addition of maltodextrin and water removal during prolonged heating. The preservation effect of phenolic components in both WM-T and SM-T is governed by many mechanisms including pH stabilization, zeta potential modulation, protein interactions, complex formation, and encapsulation effects. Therefore, optimizing milk–tea stability and phenolic preservation through L:M ratio adjustments provides a promising approach for enhancing milk–tea properties. [ABSTRACT FROM AUTHOR]