Search

The Special Issue Soft and Hard Magnetic Materials: Latest Advances and Prospects aims to provide researchers with an overview of some aspects of the current research in magnetic materials from theoretical studies to their applications, including their fabrication and characterization [...]

Pulsed laser-deposited (PLD) MnBi films were fabricated by alternating deposition of Mn and Bi layers. In order to obtain the ferromagnetic MnBi phase, heat treatments were performed on the samples. Simultaneously, the resistance of the samples was monitored as a function of the temperature. Thus, on increasing the temperature, a steep decrease in the resistance of the films was observed, simultaneous to the onset of the formation of the MnBi phase. At room-temperature, these annealed samples showed a ferromagnetic behavior, as well as the presence of the characteristic LT-MnBi phase diffraction peaks in the X-ray diffraction patterns. The temperature of the generation of the MnBi phase depended on the relative concentration of Mn and Bi in the different samples: on increasing the Bi atomic concentration, the temperature of the generation of the MnBi phase decreased.

The magnetic and transport properties of pulsed laser-deposited Co100−x–Cux thin films were tailored through their nano-morphology and composition by controlling for the deposition geometry, namely normal or oblique deposition, and their Cu content. All films were composed of an amorphous Co matrix and a textured growth of Cu nanocrystals, whose presence and size d increased as x increased. For x = 50, all films were superparamagnetic, regardless of deposition geometry. The normally deposited films showed no in-plane magnetic anisotropy. On the contrary, controllable in-plane uniaxial magnetic anisotropy in both direction and magnitude was generated in the obliquely deposited films. The magnetic anisotropy field Hk remained constant for x = 0, 5 and 10, Hk ≈ 35 kAm−1, and decreased to 28 and 26 kAm−1 for x = 20 and 30, respectively. This anisotropy had a magnetostatic origin due to a tilted nano-sheet morphology. In the normally deposited films, the coercive field Hc increased when x increased, from 200 (x = 0) to 1100 Am−1 (x = 30). In contrast, in obliquely deposited films, Hc decreased from 1500 (x = 0) to 100 Am−1 (x = 30) as x increased. Activation energy spectra corresponding to structural relaxation phenomena in obliquely deposited films were obtained from transport property measurements. They revealed two peaks, which also depended on their nano-morphology and composition.