Search

Coastal environmental assessment techniques have evolved into one of the most important fields for the long-term development and management of coastal zones. So, the overall aim of the present investigation was to provide effective approaches for making informed decisions about the Gamasa coast sediment quality. Over a two-year investigation, sediment samples were meticulously collected from the Gamasa estuary and littoral shelf. The inductively coupled plasma mass spectra (ICP-MS) was used to the total concentrations of Al, Fe, Ti, Mg, Mn, Cu, P, V, Ba, Cr, Sr, Co, Ni, Zn, Pb, Zr, and Ce. Single elements environmental pollution indices including the geoaccumulation index (Igeo), contamination factor (CF), and enrichment factor (EF), as well as multi-elements pollution indices comprising the potential ecological risk index (RI), degree of contamination (Dc), and pollution load index (PLI) were used to assess the sediment and the various geo-environmental variables affecting the Mediterranean coastal system. Furthermore, the Dc, PLI, and RI were estimated using the random forest (RF) and Back-Propagation Neural Network (BPNN) depending on the selected elements. According to the Dc results, all the investigated sediment samples categories were considerably contaminated. Cr, Co, Ni, Cu, Zr, V, Zn, P, and Mn showed remarkable enrichment in sediment samples and were originated from anthropogenic sources based on the CF, EF, and Igeo data. Moreover, the RI findings revealed that all the samples tested pose a low ecologically risk. Meanwhile, based on PLI, 70% of the Gamasa estuary samples were polluted, while 93.75% of littoral shelf sediment was unpolluted. The BPNNs -PCs-CD-17 model performed the best and demonstrated a better association between exceptional qualities and CD. With R2 values of 1.00 for calibration (Cal.) and 1.00 for validation (Val.). The BPNNs -PCs-PLI-17 models performed the best in terms of measuring PLI with respective R2 values of 1.00 and 0.98 for the Cal. and Val. datasets. The findings showed that the RF and BPNN models may be used to precisely quantify the pollution indices (Dc, PLI, and RI) in calibration (Cal.) and validation (Val.) datasets utilizing potentially toxic elements of surface sediment.

This research intends to offer a scientific foundation for environmental monitoring and early warning which will aid in the environmental protection management of Qaroun Lake. Qaroun Lake is increasingly influenced by untreated wastewater discharge from many anthropogenic activities, making it vulnerable to pollution. For that, six environmental pollution indices, namely contamination factor (Cf), enrichment factor (EF), geo-accumulation index (Igeo), degree of contamination (Dc), pollution load index (PLI), and potential ecological risk index (RI), were utilized to assess the bottom sediment and to determine the different geo-environmental variables affecting the lake system. Cluster analysis (CA), and principal component analysis (PCA) were used to explore the potential pollution sources of heavy metal. Moreover, the efficiency of partial least-square regression (PLSR) and multiple linear regression (MLR) were tested to assess the Dc, PLI, and RI depending on the selected elements. The sediment samples were carefully collected from 16 locations of Qaroun Lake in two investigated years in 2018 and 2019. Total concentrations of Al, As, Ba, Cd, Co, Cr, Cu, Fe, Ga, Hf, Li, Mg, Mn, Mo, Ni, P, Pb, Sb, Se, Zn, and Zr were quantified using inductively coupled plasma mass spectra (ICP-MS). According to the Cf, EF, and Igeo results, As, Cd, Ga, Hf, P, Sb, Se, and Zr demonstrated significant enrichment in sediment and were derived from anthropogenic sources. According to Dc results, all collected samples were categorized under a very high degree of contamination. Further, the results of RI showed that the lake is at very high ecological risk. Meanwhile, the PLI data indicated 59% of lake was polluted and 41% had PLI < 1. The PLSR and MLR models based on studied elements presented the highest efficiency as alternative approaches to assess the Dc, PLI, and RI of sediments. For examples, the validation (Val.) models presented the best performance of these indices, with R2val = 0.948–0.989 and with model accuracy ACCv = 0.984–0.999 for PLSR, and with R2val = 0.760–0.979 and with ACCv = 0.867–0.984 for MLR. Both models for Dc, PLI, and RI showed that there was no clear overfitting or underfitting between measuring, calibrating, and validating datasets. Finally, the combinations of Cf, EF, Igeo, PLI, Dc, RI, CA, PCA, PLSR, and MLR approaches represent valuable and applicable methods for assessing the risk of potentially harmful elemental contamination in the sediment of Qaroun Lake.

The present study focuses on the risk assessment of heavy metal contamination in aquatic ecosystems by evaluating the current situation of heavy metals in seven locations (North Amer El Bahry, Amer, Bakr, Ras Gharib, July Water Floud, Ras Shokeir, and El Marageen) along the Suez Gulf coast that are well-known representative sites for petroleum activities in Egypt. One hundred and forty-six samples of surface sediments were carefully collected from twenty-seven profiles in the intertidal and surf zone. The hydrochemical parameters, such as pH and salinity (S‰), were measured during sample collection. The mineralogy study was carried out by an X-ray diffractometer (XRD), and the concentrations of Al, Mn, Fe, Cr, Cu, Co, Zn, Cd, and Pb were determined using inductively coupled plasma mass spectra (ICP-MS). The ecological risks of heavy metals were assessed by applying the contamination factor (CF), enrichment factor (EF), geoaccumulation index (Igeo), pollution load index (PLI), and potential ecological risk index (RI). The mineralogical composition mainly comprised quartz, dolomites, calcite, and feldspars. The average concentrations of the detected heavy metals, in descending order, were Al > Fe > Mn > Cr > Pb > Cu > Zn > Ni > Co > Cd. A non-significant or negative relationship between the heavy metal concentration in the samples and their textural grain size characteristics was observed. The coastal surface sediment samples of the Suez Gulf contained lower concentrations of heavy metals than those published for other regions in the world with petroleum activities, except for Al, Mn, and Cr. The results for the CF, EF, and Igeo showed that Cd and Pb have severe enrichment in surface sediment and are derived from anthropogenic sources, while Al, Mn, Fe, Cr, Co, Ni, Cu, and Zn originate from natural sources. By comparison, the PLI and RI results indicate that the North Amer El Bahry and July Water Floud are considered polluted areas due to their petroleum activities. The continuous monitoring and assessment of pollutants in the Suez Gulf will aid in the protection of the environment and the sustainability of resources.