Search

The concept of food packaging plays a crucial role in ensuring consumer satisfaction and extending the shelf life of food products. The rising trend of introducing innovative materials for food packaging has become prominent in recent years. The present study aims to investigate the impact of rosehip seed oil (RSO) on the physical, physicochemical, antioxidant, and antimicrobial properties of edible films based on chitosan for potential fruit packaging applications. Scanning electron microscopy revealed a uniform distribution of the incorporated emulsion throughout the edible film. The addition of RSO increased the deformation at break in both tensile and puncture test, thereby improving the elastic properties of the films. The resulting films exhibited a light-yellow color with high opacity. The immobilization of RSO led to a decrease in water content by almost two times and an increase in water vapor permeability of the films. The films showed enhanced antioxidant activity and retained good protective properties against the yeast S. cerevisiae. Consequently, these newly formulated multicomponent films are found to be suitable for applications in the development of active food packaging because of their physical, antioxidant, and antimicrobial properties.

This study aimed to determine the effects of the ozone treatment of film-forming solutions (FFSs) containing whey protein concentrate (WPC) and gelatine on biopolymer films’ physical, mechanical, and thermal properties. Film samples were produced from a FFS that was ozone-treated at 0 (control), 5, 10, and 30 min. Ozone treatment caused an increase in the pH values of the FFS, whereas the zeta potential remained negative. The films became lighter in colour, slightly greenish, and more opaque with longer ozonation times. The control sample showed the highest thermogravimetric weight loss (92.15%). The weight loss of the samples decreased with increasing ozone treatment time. The application of ozone treatment on the FFS enhanced the films’ mechanical properties. Increased ozone treatment time improved the film samples’ tensile strength, elongation at break, and toughness values. In conclusion, the results of this study demonstrate that the ozone treatment of FFS containing whey protein concentrate and gelatine can significantly enhance the physical, mechanical, and thermal properties of biopolymer films. These results highlight the potential of ozone treatment as a viable method for improving the performance and quality of biopolymer films used in food packaging, offering promising advantages for sustainable and environmentally friendly packaging solutions.

In this work, smart edible coating and films with excellent UV barrier properties were prepared from alginate, whey protein isolate, and curcumin. The primary focus of this investigation centered on assessing the impact of whey protein and curcumin on the physical and functional properties of the alginate films. Whey protein reduced the film transparency while simultaneously enhancing the hydrophobicity and antioxidant properties of the alginate film. Curcumin imparted a yellow hue to the film, consequently decreasing the transparency of the film. It also substantially improved hydrophobicity, antioxidant activity, and UV-blocking efficiency within the films. Remarkably, curcumin demonstrated a significant reduction in the water vapor transmission rate of the film. For the preservation of apples, a higher concentration of curcumin was required, which effectively suppressed the respiration rate and moisture loss post-harvest, resulting in an extended shelf-life for the apples. As a result, the coated apples exhibited significantly reduced enzymatic browning and weight loss in comparison to their uncoated counterparts. Furthermore, these curcumin-containing films underwent a reversible color change from orange to red when exposed to ammonia vapor. This attribute highlights the potential of the developed coating and film as a smart, active food packaging solution, particularly for light-sensitive food products.

Scale gelatin films derived from croaker fish and infused with Prosopis (Prosopis cineraria) extract (PE) at concentrations of 0.3% and 0.7% were produced. A control film, void of extract, was employed for comparative purposes. The thickness of each film was found to be statistically insignificant (p > 0.05). The results show that the highest solubility (78.57 ± 3.57%) was found for the glycerol film, and the least permeability was found for the water vapor (0.74 ± 0.09 ×10−10g s−1m−1Pa−1); however, the water vapor permeability (WVP) and water solubility (WS) of the films that contained PE were considerably lower than those of the control film (p < 0.05). In contrast to the control film, those infused with 0.7% PE exhibited exceptional UV-barrier properties (>99%) and favorable thermal characteristics. The highest and lowest antioxidant activities were found for the 7% Prosopis cineraria extract (56.96 ± 2.6%) and the glycerol film (40.66 ± 2.46%), respectively. No antibacterial activity was observed in these films. Microscopic pictures showed that all three films had a uniform and plain surface. Fourier transform infrared spectroscopy–attenuated total reflectance (FTIR–ATR) analysis revealed distinct amide bands and protein–polyphenol interactions within the films that contained the extract.

The significant concerns associated with the widespread use of petroleum-based plastic materials have prompted substantial research on and development of active food packaging materials. Even though fish gelatin-based films are appealing as active food packaging materials, they present practical production challenges. Therefore, this study aimed to develop an edible film using Ficus carica L. leaf extract (FLE), as it is affordable, accessible, and has superoxide anion radical scavenging action. This edible film was produced by adding FLE to mackerel skin gelatin at varied concentrations (2.5–10% w/w). The results showed that adding FLE to gelatin films significantly affected the tensile strength (TS), elongation at break (EAB), transmittance and transparency, solubility, water vapor permeability (WVP), antioxidant activity, and antibacterial activity. Among all the samples, the most promising result was obtained for the edible film with FLE 10%, resulting in TS, EAB, solubility, WVP, antioxidant activity, and antibacterial activity against S. aureus and E. coli results of 2.74 MPa, 372.82%, 36.20%, 3.96 × 10−11 g/msPa, 45.49%, 27.27 mm, and 25.10 mm, respectively. The study’s overall findings showed that fish gelatin-based films incorporated with FLE are promising eco-friendly, biodegradable, and sustainable active packaging materials.

To date, the most commonly used probiotics in the potential synbiotic combinations (SC) in breads belong to the family of Lactobacillaceae and Bifidobacteriaceae. However, Bacillus coagulans as a heat-resistant bacteria, and Saccharomyces boulardii, as a probiotic yeast, could be promising for use in SC bread. Inulin is the most commonly directly used prebiotic source in formulations of potential SC bread. Moreover, co-encapsulations of probiotics with prebiotics, mainly including different hydrocolloids, could be beneficial. Although the consumption of potential SC in bread, generally including Lactobacillus sporogenes and inulin, by diabetics had some health benefits, there is a need for more comprehensive clinical trials.

Several consumable substances, including fruit and vegetable purees, extracts, juices, and plant residue, were analyzed for their matrix-forming potential. These matrices serve as the basis for the production of edible films, sheets, and coatings that can be eaten as nutritional treats or applied to food products, thereby contributing to their overall good quality. Furthermore, this innovative approach also contributes to optimizing the performance of synthetic packaging, ultimately reducing reliance on synthetic polymers in various applications. This article explores the viability of incorporating fruits and vegetables as basic ingredients within edible films, sheets, and coatings. The utilization of fruits and vegetables in this manner becomes achievable due to the existence of polysaccharides and proteins that facilitate the formation of matrices in their makeup. Moreover, including bioactive substances like vitamins and polyphenols can impart attributes akin to active materials, such as antioxidants or antimicrobial agents. Advancing the creation of edible films, sheets, and coatings derived from fruits and vegetables holds great potential for merging the barrier and mechanical attributes of biopolymers with the nutritional and sensory qualities inherent in these natural components. These edible films made from fruits and vegetables could potentially serve as alternatives to seaweed in sushi production or even replace conventional bread, pancakes, tortillas, and lavash in the diet of people suffering from celiac disease or gluten allergy, while fruit and vegetable coatings may be used in fresh and processed food products, especially fruits and vegetables but also sweets.

Applying edible coatings added with plant essential oils is a strategy used to delay ripening processes in climacteric fruits such as papaya. Formulations comprising 3% or 4% cassava starch (w/v), added with clove or cinnamon essential oils (2 mL/L), were tested for microbial inhibition (in vitro) purposes. Moreover, these fruits’ physicochemical and microbiological aspects were assessed at 25 °C, for 12 days. Slight variations in pH and Brix values were observed during storage. On the other hand, there were no significant variations in carotenoid contents over storage time. The papaya fruits’ coating contributed to reducing their weight loss from 40.66% (uncoated sample) to 24.10% on the 12th storage day, as well as delayed changes often observed during the ripening process. The 4% cassava starch coatings added with essential oils were more efficient in reducing microbiological levels. The herein proposed treatments reduced aerobic mesophilic bacteria, as well as molds and yeast counts, by 1.48 and 1.95 log CFU/g, on average, respectively, in comparison to the control sample. The assessed microorganism counts were higher in the uncoated sample than in the coated papaya fruits, after 12 days of storage. Thus, the tested coatings can potentially delay the emergence of post-harvest changes; consequently, they can help improve the quality of papaya fruits and extend their shelf life.

Ulva rigida green seaweed is an abundant biomass consisting of polysaccharides and protein mixtures and a potential bioresource for bioplastic food packaging. This research prepared and characterized novel biodegradable films from Ulva rigida extracts. The water-soluble fraction of Ulva rigida was extracted and prepared into bioplastic films. 1H nuclear magnetic resonance indicated the presence of rhamnose, glucuronic and sulfate polysaccharides, while major amino acid components determined via high-performance liquid chromatography (HPLC) were aspartic acid, glutamic acid, alanine and glycine. Seaweed extracts were formulated with glycerol and triethyl citrate (20% and 30%) and prepared into films. Ulva rigida films showed non-homogeneous microstructures, as determined via scanning electron microscopy, due to immiscible crystalline component mixtures. X-ray diffraction also indicated modified crystalline morphology due to different plasticizers, while infrared spectra suggested interaction between plasticizers and Ulva rigida polymers via hydrogen bonding. The addition of glycerol decreased the glass transition temperature of the films from −36 °C for control films to −62 °C for films with 30% glycerol, indicating better plasticization. Water vapor and oxygen permeability were retained at up to 20% plasticizer content, and further addition of plasticizers increased the water permeability up to 6.5 g·mm/m2·day·KPa, while oxygen permeability decreased below 20 mL·mm/m2·day·atm when blending plasticizers at 30%. Adding glycerol efficiently improved tensile stress and strain by up to 4- and 3-fold, respectively. Glycerol-plasticized Ulva rigida extract films were produced as novel bio-based materials that supported sustainable food packaging.

According to a profusion of academic studies on the use of organic materials or biopolymers as key components, the current trajectory of food packaging techniques is showing a positive inclination. Notably, one such biopolymer that has attracted much attention is edible film. The biopolymers that have been stated as constitutive components are composed of polysaccharides, lipids, proteins, or a combination of these, which work together to reinforce one another’s properties and create homogenous mixtures. An edible film provides a clear, thin layer that encases foodstuffs, including their packaging. The production and use of edible film have recently been the focus of much research in the field of food polymers. Extending the shelf life of food goods is the goal of this research. Given their great susceptibility to change brought on by outside forces or pollutants, which may result in oxidative rancidity, the proper storage of nutrient-dense food items, particularly meat products, deserves careful study. Many edible films have been found to contain active ingredients, such antimicrobials or antioxidants, that can successfully prevent the spoiling of meat products, a process that can happen in a short amount of time. Surprisingly, a number of scholarly examinations reveal that edible film may be cooked alongside meat because of its organic makeup. We hope that the use of edible film will lead to a more environmentally responsible method of food packaging than has previously been possible.

Sea fennel (Crithmum maritimum L.) is a perennial, strongly aromatic herb that has been used since ancient times in cuisine and folk medicine due to its renowned properties. Recently described as a “cash” crop, sea fennel is an ideal candidate for the promotion of halophyte agriculture in the Mediterranean basin due to its acknowledged adaptation to the Mediterranean climate, its resilience to risks/shocks related to climate changes, and its exploitability in food and non-food applications, which generates an alternative source of employment in rural areas. The present review provides insight into the nutritional and functional traits of this new crop as well as its exploitation in innovative food and nutraceutical applications. Various previous studies have fully demonstrated the high biological and nutritional potential of sea fennel, highlighting its high content of bioactive compounds, including polyphenols, carotenoids, ω-3 and ω-6 essential fatty acids, minerals, vitamins, and essential oils. Moreover, in previous studies, this aromatic halophyte showed good potential for application in the manufacturing of high-value foods, including both fermented and unfermented preserves, sauces, powders, and spices, herbal infusions and decoctions, and even edible films, as well as nutraceuticals. Further research efforts are needed to fully disclose the potential of this halophyte in view of its full exploitation by the food and nutraceutical industries.

Mango (Mangifera indica L.) is one of the most popular tropical fruits grown in Egypt and several other countries, making it a potential export commodity. Excessive deterioration after harvest requires various treatments to maintain fruit quality. We evaluated the treatments effects of melatonin (MT) as an anti-ethylene agent and tragacanth gum (TRG) as an edible coating individually and together (MT–TRG) before storing mangoes at 12 °C for 32 days under 85–90% relative humidity. Compared with control, all treatments were significantly effective in preserving fruit quality. Fruits treated with MT–TRG showed significantly lower decay values, respiration rates, ethylene production, and weight loss than untreated fruits. MT–TRG treatment significantly enhanced fruit quality, thereby maintaining fruit appearance, flesh color, firmness, total soluble solids and phenolic contents, and pectin methyl esterase, polyphenol oxidase, and peroxidase activities during the storage period. We propose 200 µM MT + 1% TRG as a safe postharvest treatment to reduce the deterioration of mangoes and maintain fruit quality.

The development of functional edible films is promising for the food industry, and improving the water barrier of edible films has been a research challenge in recent years. In this study, curcumin (Cur) was added to zein (Z) and shellac (S) to prepare an edible composite film with a strong water barrier and antioxidant properties. The addition of curcumin significantly reduced the water vapor permeability (WVP), water solubility (WS), and elongation at break (EB), and it clearly improved the tensile strength (TS), water contact angle (WCA), and optical properties of the composite film. The ZS–Cur films were characterized by SEM, FT-IR, XRD, DSC, and TGA; the results indicated that hydrogen bonds were formed among the curcumin, zein, and shellac, which changed the microstructure and improved the thermal stability of the film. A test of curcumin release behavior showed controlled release of curcumin from the film matrix. ZS–Cur films displayed remarkable pH responsiveness, strong antioxidant properties, and inhibitory effects on E. coli. Therefore, the insoluble active food packaging prepared in this study provides a new strategy for the development of functional edible films and also provides a possibility for the application of edible films to extend the shelf life of fresh food.

The development of intelligent indicator film that can detect changes in food quality is a new trend in the food packaging field. The WPNFs-PU-ACN/Gly film was prepared based on whey protein isolate nanofibers (WPNFs). Anthocyanin (ACN) and glycerol (Gly) were used as the color indicator and the plasticizer, respectively, while pullulan (PU) was added to enhance mechanical properties of WPNFs-PU-ACN/Gly edible film. In the study, the addition of ACN improved the hydrophobicity and oxidation resistance of the indicator film; with an increase in pH, the color of the indicator film shifted from dark pink to grey, and its surface was uniform and smooth. Therefore, the WPNFs-PU-ACN/Gly edible film would be suitable for sensing the pH of salmon, which changes with deterioration, as the color change of ACN was completely consistent with fish pH. Furthermore, the color change after being exposed to grey was evaluated in conjunction with hardness, chewiness, and resilience of salmon as an indication. This shows that intelligent indicator film made of WPNFs, PU, ACN, and Gly could contribute to the development of safe food.

Cheese whey fermented by lactic acid bacteria (LAB) was used to develop an edible film with antifungal properties. Five LAB strains isolated from artisanal cheeses were screened for antifungal activity and incorporated into a whey–gelatin film. Of the strains tested, Levilactobacillus brevis SJC120 showed the strongest activity against five filamentous fungi isolated from cheese and cheese-making environment, at both 10 °C and 20 °C. The cell-free supernatant from L. brevis inhibited fungal growth by more than 80%. Incorporation of bacterial cells into the film did not alter the moisture content, water vapor permeability, or mechanical and optical properties. The whey–gelatin film was also able to maintain the viability of L. brevis cells at 107 log CFU/g after 30 days at 10 °C. In cheeses wrapped with L. brevis film, the size of fungal colonies decreased by 55% to 76%. Furthermore, no significant differences (p > 0.05) were observed in cheese proteolysis or in the moisture, fat, and protein content of the cheese wrapped with films. The results showed that whey–gelatin film with L. brevis SJC120 can reduce the contamination of cheese with filamentous fungi and could be used as an alternative to conventional cheese preservation and packaging.

Fresh-cut fruit requires an edible and water-resistant coating to remain fresh. This article investigated the effects of transglutaminase (TGase) and sunflower oil on the water-resistant characteristics, mechanical properties, and microstructure of a whey protein-based film. The whey protein-based emulsion coating’s preservation effect on fresh-cut apples was confirmed. According to the findings, sunflower oil (added at 1.5% w/w) could interact with β-lactoglobulin, α-lactoglobulin dimer, and β-lactoglobulin dimer to form emulsion droplets that are evenly dispersed throughout the protein film. This effect, combined with the covalent cross-linking of TGase, significantly improves the films’ microstructure, mechanical properties, and water resistance. However, too much and unevenly distributed sunflower oil (add 3% w/w) partially prevented the covalent cross-linking of TGase, reducing the elongation at the break of the composite film. In the fresh-cut apple storage experiment, the whey protein-based emulsion coating treatment significantly reduced the weight loss rate and browning index of fresh-cut apples by 26.55% and 46.39%, respectively. This was accomplished by the coating treatment significantly inhibiting the respiration rate increase, PPO and CAT activity enhancement, H2O2 production, and MDA accumulation. This research provides practical, technical, and theoretical guidance for the preservation of fresh-cut fruit.

Biopolymer-based edible packaging is an effective way of preserving food while protecting the environment. This study developed an edible composite film using chitosan and native glutinous rice starch (NGRS) and incorporated essential oils (EOs) such as garlic, galangal, turmeric, and kaffir lime at fixed concentrations (0.312 mg/mL) to test its physicochemical and antimicrobial properties. The EO-added films were found to significantly improve the overall color characteristics (lightness, redness, and yellowness) as compared to the control film. The control films had higher opacity, while the EO-added films had slightly reduced levels of opacity and produced clearer films. The tensile strength and elongation at break values of the films varied among the samples. The control samples had the highest tensile strength, followed by the turmeric EO-added samples. However, the highest elongation at break value was found in the galangal and garlic EO-added films. The Young’s modulus results showed that garlic EO and kaffir lime EO had the lowest stiffness values. The total moisture content and water vapor permeability were very low in the garlic EO-added films. Despite the differences in EOs, the Fourier-transform infrared spectroscopy (FTIR) patterns of the tested films were similar among each other. Microstructural observation of the surface and cross-section of the tested edible film exhibited smooth and fissureless patterns, especially in the EO-added films, particularly in the galangal and kaffir lime EO-added films. The antimicrobial activity of the EO-added films was highly efficient against various gram-positive and gram-negative pathogens. Among the EO-added films, the garlic and galangal EO-added films exhibited superior inhibitory activity against Escherichia coli, Salmonella Typhimurium, Listeria monocytogenes, Staphylococcus aureus, and Pseudomonas fluorescence, and turmeric and kaffir lime EO-added films showed potential antimicrobial activity against Lactobacillus plantarum and L. monocytogenes. Overall, this study concludes that the addition of EOs significantly improved the physicochemical and antimicrobial properties of the CH-NGRS-based edible films, making them highly suitable for food applications.

The good oxygen barrier and hydrophobic properties of curdlan (CL) film might be suitable complements for MC film, and its similar glucose unit and thermal-gel character might endow the methyl cellulose (MC)/CL blended system with compatibility and good comprehensive properties. Thus, MC/CL blended films were developed. The effects of MC/CL blend ratios on the microstructures and physical properties of the blends were characterized by using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), oxygen and water vapor permeability testing, dynamic mechanical analysis (DMA), light transmittance testing, tensile testing, hydrophilic property testing, and water solubility testing. The introduction of CL affected the molecular aggregation and crystallization of the MC molecules, suggesting MC–CL molecular interactions. The cross-sectional roughness of the MC/CL film increased with an increase in CL content, while the surface of the MC/CL 5:5 film was smoother than those of the MC/CL 7:3 and 3:7 films. Only one glass transition temperature, which was between that of the MC and CL films, was observed for the MC/CL 7:3 and MC/CL 5:5 films, indicating the good compatibility of the MC and CL molecules at these two blend ratios. The hydrophobicity and water insolubility increased with the CL content, which was due to the combined effects of more hydrophobic cavities in the CL triple-helix and increased surface roughness. Increased oxygen barrier properties with increasing CL content might be a combined effect of the increased hydrogen bonds and hydrophilic ektexines of the CL triple-helix. The elongations of the blended films were higher than those of the MC film, which might be related to its increased water content. The MC/CL 7:3 and MC/CL 5:5 films retained the good light transmittance and tensile strength of the MC film, which corresponded well to their good compatibility and might be due to the effects of the MC–CL molecular interactions and the relative smooth morphologies. MC/CL 5:5 showed improved water vapor barrier properties, which might be due to its smooth surface morphologies. This research offers new MC based films with improved properties and good compatibility, providing great potential for use as edible coatings, capsules, and packaging materials.

Plastic pollution has raised interest in biodegradable and sustainable plastic alternatives. For edible food packaging, seaweed biopolymers have been studied for their film-forming properties. In this study, packaging films were developed using the solvent casting technique from natural red seaweed (Kappaphycus alvarezii) and coffee waste product. The physico-chemical and thermal properties of seaweed/coffee biopolymer films was obtained using dynamic light scattering (DLS), scanning electron microscopy (SEM), Fourier transmission irradiation (FT-IR), water contact angle measurement (WCA) and thermogravimetric analysis (TGA). The characterization study was carried out to improve the film’s morphological, thermal, and mechanical properties. The average particle size of coffee waste was found to be between 1.106 and 1.281 µm, with a zeta potential value of −27.0 mV indicating the compound’s strong negative charge. The SEM analysis revealed that the coffee filler was evenly dispersed in the polymer matrix, improving the film’s structural properties. The FT-IR result shows that coffee waste was successfully incorporated over the film matrix with the presence of a N-H bond. The hydrophobic property of the film was enhanced with the incorporation of coffee filler, indicating increased water contact angle compared to the neat film. The tensile properties of the biopolymer film were significantly improved at 4 wt% coffee powder with optimum tensile strength (35.47 MPa) with the addition of coffee waste powder. The incorporation of coffee waste into the seaweed matrix increased the functional properties of the fabricated biopolymer film. Thus, seaweed/coffee biopolymer film has the potential to be used in food packaging and other applications.

The purpose of this work was to first investigate the impact of cold plasma (CP) treatment, performed at various times (0–30 min), on the characteristics of basil seed gum (BSG), as well as the fabrication of functional edible films with the modified BSG. FT-IR spectra of CP-treated BSG revealed change at 1596 and 1718 cm−1, indicating the formation of carbonyl groups. Both untreated and CP-modified BSG dispersions showed shear-thinning behavior with a higher apparent viscosity for the CP-modified dispersions at studied temperatures. Untreated BSG dispersion and the one treated by CP for 10 min revealed time-independent behavior, while those treated for 20 and 30 min showed a rheopectic behavior. CP-modified BSG dispersion had higher G′, G″, and complex viscosity than untreated BSG. Higher contact angle for the CP-modified BSG suggested enhanced hydrophobic nature, while the surface tension was lower compared to the untreated BSG. SEM micrographs revealed an increase in the surface roughness of treated samples. Moreover, modified BSG was successfully used for the preparation of edible film incorporating tannic acid and vitamin D3-loaded nanophytosomes with high stability during storage compared to the free form addition. The stability of encapsulated forms of vitamin D3 and tannic acid was 39.77% and 38.91%, more than that of free forms, respectively. In conclusion, CP is an appropriate technique for modifying the properties of BSG and fabrication of functional edible films.

Balancing physicochemical properties and sensory properties is one of the key points in expanding edible packaging applications. The work consisted of two parts, one was to investigate the effects of cellulose nanocrystals (CNC) on the packaging-related properties of whey protein isolate films with natural colorants (curcumin, phycocyanin, and lycopene) under freeze-thaw (FT) conditions; the other was to test oral tactility and visual sensory properties of the edible films and their overall acceptability in packed ice cream. FT treatment reduced the mechanical strength and moisture content and increased the water vapor permeability of the films, as water-phase transformation not only disrupted hydrogen bonds but also the film network structure through physical stress. The oral tactility produced by CNC and the visual effect produced by colorants could affect participants’ preference for edible films. This study provides a good reference for the consumer-driven product development of packaged low-temperature products.

Starch and gelatin are natural biopolymers that offer a variety of benefits and are available at relatively low costs. In addition to this, they are an appealing substitute for synthetic polymers for the manufacturing of packaging films. Such packaging films are not only biodegradable but are also edible. Moreover, they are environmentally friendly and remain extremely cost-effective. In lieu of this, films made from fish gelatin and cornstarch have been the subject of several experiments. The pristine gelatin films have poor performance against water diffusion but exhibit excellent flexibility. The goal of this study was to assess the performance of pristine gelatin films along with the addition of food plasticizers. For this purpose, solutions of gelatin/cornstarch were prepared and specified quantities of food colors/plasticizers were added to develop different shades. The films were produced by using a blade coating method and were characterized by means of their shaded colors, water vapor transmission rate (WVTR), compositional changes via Fourier transform infrared spectroscopy (FTIR), hardness, bendability, transparency, wettability, surface roughness, and thermal stability. It was observed that the addition of several food colors enhanced the moisture blocking effect, as a 10% reduction in WVTR was observed in the shaded films as compared to pristine films. The yellow-shaded films exhibited the lowest WVTR, i.e., around 73 g/m2·day when tested at 23 °C/65%RH. It was also observed that the films’ WVTR, moisture content, and thickness were altered when different colors were added into them, although the chemical structure remained unchanged. The mechanical properties of the shaded films were improved by a factor of two after the addition of colored plasticizers. Optical examination and AFM demonstrated that the generated films had no fractures and were homogeneous, clear, and shiny. Finally, a biscuit was packaged in the developed films and was monitored via shore hardness. It was observed that the edible packed sample’s hardness remained constant even after 5 days. This clearly suggested that the developed films have the potential to be used for packaging in various industries.

Lotus seed starch was cross-linked using sodium trimetaphosphate (STMP) in varying amounts (1, 3, and 5%), and its rheological, pasting, thermal, and physicochemical properties were investigated. These cross-linked lotus seed starches (CL-LS-1, CL-LS-3, CL-LS-5) were also used to produce films (CL-LSFs), which were then examined for their mechanical characteristics, water vapor permeability, moisture content, opacity, thickness, and water solubility. After cross-linking, the solubility, amylose content, and swelling power of all the starch samples decreased. Cross-linking resulted in an increased pasting temperature, while peak viscosity (PV) decreased, with CL-LS-5 exhibiting the lowest peak viscosity (1640.22 MPa·s). In comparison to native starch, the thermal characteristics of CL-LS demonstrated greater gelatinization temperatures (To, Tp, Tc) and gelatinization enthalpy (ΔHgel). The gelatinization enthalpy of CL-LS varied between 152.70 and 214.16 J/g, while for native LS the value was 177.91 J/g. Lower moisture content, water solubility, and water vapor permeability were observed in the CL-LSFs. However, the cross-linking modification did not produce much effect on the film thickness. The highest tensile strength (12.52 MPa) and lowest elongation at break (26.11%) were found in CL-LSF-5. Thus, the starch films’ barrier and mechanical qualities were enhanced by cross-linking.

The growing concern about pollution produced by plastic waste and the consequent environmental dangers has led to increased interest in replacing plastics with sustainable and biodegradable alternatives. Biopolymers such as seaweed have been examined for their film-forming characteristics to make edible films for packaging applications. This study aimed to prepare biopolymeric packaging films through a solvent-casting process using natural red seaweed (Kappaphycus alvarezii) and kenaf cellulose nanofiber (CNF), followed by film surface treatment using silane. The hydrophobic properties of the seaweed/CNF biopolymer were examined through water solubility (WS), moisture absorption capacity (MAC), water vapor permeability (WVP), and contact angle (CA) measurements. Fourier transform infra-red (FT-IR) film spectra clearly showed successful modification of the seaweed film (SF) by silane and the incorporation of kenaf CNF over the surface of the seaweed film. The wettability-related analysis showed positive results in determining the modified film’s hydrophobicity properties. Film degradation analysis using the soil burial method showed a lower degradation rate for films with a higher CNF loading. Overall, the characterization results of the seaweed/CNF biopolymer film predicted hydrophobicity properties. The slow degradation rate was improved with surface modification using silane treatment and the incorporation of kenaf CNF filler with the seaweed matrix. As a result, we found that the seaweed/CNF biopolymer film could be used as high-grade packaging material in many potential applications.

This study develops bio-nano composite gelatin-based edible film (NEF) by combining nanogelatin, cellulose nanocrystal (CNC), and nanopropolis (NP) fillers to improve the resulting film characteristics. The NEF was characterized in terms of thickness, swelling, pH, water content, solubility, vapor and oxygen permeability, mechanical properties, heat resistance, morphology, transparency, and color. The results showed that the thickness and swelling increased significantly, whilst the pH did not significantly differ in each treatment. The water content and the water solubility also showed no significant changes with loadings of both fillers. At the same time, vapor and oxygen permeability decreased with addition of the fillers but were not significantly affected by the loading amounts. The heat resistance properties increased with the filler addition. Tensile strength and Young’s modulus increased for the films loaded with >3% CNC. The elongation at break showed a significant difference together with transparency and color change. The greater the CNC concentration and NP loading were, the darker the resulting transparency and the color of the NEF. Overall results show a considerable improvement in the properties of the resulting NEFs with the incorporation of CNC and NP fillers.

The cellulose from agroindustrial waste can be treated and converted into nanocrystals or nanofibers. It could be used to produce biodegradable and edible films, contributing to the circular economy and being environmentally friendly. This research aimed to develop an edible film elaborated with activated cellulose nanocrystals, native potato starch, and glycerin. The activated cellulose nanocrystals were obtained by basic/acid digestion and esterification with citric acid from corn husks. The starch was extracted from the native potato cultivated at 3500 m of altitude. Four film formulations were elaborated with potato starch (2.6 to 4.4%), cellulose nanocrystals (0.0 to 0.12%), and glycerin (3.0 to 4.2%), by thermoforming at 60 °C. It was observed that the cellulose nanocrystals reported an average size of 676.0 nm. The films mainly present hydroxyl, carbonyl, and carboxyl groups that stabilize the polymeric matrix. It was observed that the addition of cellulose nanocrystals in the films significantly increased (p-value < 0.05) water activity (0.409 to 0.447), whiteness index (96.92 to 97.27), and organic carbon content. In opposition to gelatinization temperature (156.7 to 150.1 °C), transparency (6.69 to 6.17), resistance to traction (22.29 to 14.33 N/mm), and solubility in acidic, basic, ethanol, and water media decreased. However, no significant differences were observed in the thermal decomposition of the films evaluated through TGA analysis. The addition of cellulose nanocrystals in the films gives it good mechanical and thermal resistance qualities, with low solubility, making it a potential food-coating material.

Gelatin–sodium alginate-based edible films cross-linked with pullulan were prepared using the solution casting method. FTIR spectroscopy demonstrated the existence of hydrogen bonding interactions between the components, and scanning electron microscopy observed the component of the films, revealing electrostatic interactions and thus explaining the differences in the properties of the blend films. The best mechanical properties and oxygen barrier occurred at a 1:1 percentage of pullulan to gelatin (GP11) with sodium alginate dosing for modification. Furthermore, GP11 demonstrated the best thermodynamic properties by DSC analysis, the highest UV barrier (94.13%) and the best oxidation resistance in DPPH tests. The results of storage experiments using modified edible films encapsulated in fresh fish liver oil showed that GP11 retarded grease oxidation by inhibiting the rise in peroxide and anisidine values, while inappropriate amounts of pullulan had a pro-oxidative effect on grease. The correlation between oil oxidation and material properties was investigated, and water solubility and apparent color characteristics were also assessed.

Antimicrobial composite edible film can be a solution for environmentally friendly food packaging, which can be made from fermented cheese whey containing an antimicrobial agent and cassava peel waste that contains starch. The research aims to determine the formulation of fermented cheese whey and cassava peel waste starch, resulting in an antimicrobial composite edible film with the best physical, mechanical, and water vapour permeability (WVP) properties, as well as with high antimicrobial activity. This research was conducted using experimental methods with nine composite edible film formulation treatments with three replications. Three variations in the fermented cheese whey and cassava peel starch ratio (v/v) (1:3, 1:1, 3:1) were combined with variations in the addition of glycerol (20%, 33%, 45%) (w/w) in the production of the composite edible film. Then, the physical characteristics such as elongation at break, tensile strength, WVP, colour, and antimicrobial effect of its film-forming solution were observed. The results showed that 24 h of whey fermentation with Candida tropicalis resulted in an 18.50 mm inhibition zone towards Pseudomonas aeruginosa. The best characteristic of the film was obtained from the formulation of a whey:starch ratio of 1:3 and 33% glycerol, which resulted in a thickness value of 0.21 mm, elongation at break of 19.62%, tensile strength of 0.81 N/mm2, WVP of 3.41 × 10−10·g/m·s·Pa at a relative humidity (RH) of 100%–35%, and WVP of 9.84 × 10−10·g/m·s·Pa at a RH of 75%–35%, with an antimicrobial activity towards P. aeruginosa of 5.11 mm.

Fresh cheese composition favors the growth of microorganisms and lipid oxidation, leading to a short shelf life. Whey protein concentrates can be used to produce active films in which green tea (Camellia sinensis L.) extract, rich in bioactive compounds, namely catechins, can be incorporated. Thus, the main objective of this study was to evaluate the efficacy of an edible active film, incorporated with green tea extract, to preserve goat and mixture (goat and sheep) fresh cheeses. Our results demonstrated that Portuguese green teas (antioxidant activity coefficient—AAC = 746.7) had superior antioxidant capacity to that of the evaluated Asian green tea (AAC = 650). Furthermore, green tea produced from the leaves of the new Portuguese Chá Camélia tea plantation had the highest potential to retain the antioxidant capacity (97.3%). Additionally, solid–liquid extractions led to extracts with higher antioxidant activity (AAC = 1500), but Soxhlet extractions presented higher yield (43%). Furthermore, the active film incorporated with Portuguese green tea extract exhibited a high antioxidant capacity (AAC ≈ 595.4). In addition, the active film effectively delayed the lipid oxidation of the evaluated fresh cheeses (3.2 mg MDA Eq/kg) when compared with the control (4.2 mg MDA Eq/kg). Moreover, the active films effectively inhibited the growth of microorganisms, especially E. coli (1.5 × 10 CFU/g), when compared with the blank (2.2 × 102 CFU/g). This study suggests that the new whey protein film incorporated with Portuguese green tea extract has the potential to be used to extend fresh cheese shelf life.

Most of the food packaging materials used in the market are petroleum-based plastics; such materials are neither biodegradable nor environmentally friendly and require years to decompose. To overcome these problems, biodegradable and edible materials are encouraged to be used because such materials degrade quickly due to the actions of bacteria, fungi, and other environmental effects. In this work, commonly available household materials such as gelatin, soy protein, corn starch, and papaya were used to prepare cost-effective lab-scale biodegradable and edible packaging film as an effective alternative to commercial plastics to reduce waste generation. Prepared films were characterized in terms of Fourier transform infrared spectroscopy (FTIR), water vapor transmission rate (WVTR), optical transparency, and tensile strength. FTIR confirmed the addition of papaya and soy protein to the gelatin backbone. WVTR of the gelatin-papaya films was recorded to be less than 50 g/m2/day. This water vapor barrier was five times better than films of pristine gelatin. The gelatin, papaya, and soy protein films exhibited transparencies of around 70% in the visible region. The tensile strength of the film was 2.44 MPa, which improved by a factor of 1.5 for the films containing papaya and soy protein. The barrier qualities of the gelatin and gelatin-papaya films maintained the properties even after going through 2000 bending cycles. From the results, it is inferred that the prepared films are ideally suitable for food encapsulation and their production on a larger scale can considerably cut down the plastic wastage.

Cheese whey, one of the most abundant by-products of the dairy industry, causes economic losses and pollution problems. In this study, deproteinised sweet whey was fermented by Pseudomonas taetrolens LMG 2336 to produce a prebiotic compound (lactobionic acid, LBA). Endotoxins produced by these microorganisms were successfully removed using microfiltration techniques, allowing the fermented whey permeate to be used in the food industry. The fermented whey permeate was used to develop prebiotic edible films by adding two different concentrations of gelatine (0.45 and 0.9 g gelatine g−1 LBA; LBA45 and LBA90). Furthermore, Lactobacillus plantarum CECT 9567 was added as a probiotic microorganism (LP45 and LP90), creating films containing both a prebiotic and a probiotic. The mechanical properties, water solubility, light transmittance, colour, and microstructure of the films were fully characterised. Additionally, the LBA and probiotic concentration in LP45 and LP90 were monitored under storage conditions. The strength and water solubility of the films were affected by the presence of LBA, and though all these films were homogeneous, they were slightly opaque. In LP45 and LP90, the presence of LBA as a prebiotic improved the viability of L. plantarum during cold storage, compared to the control. Therefore, these films could be used in the food industry to coat different foodstuffs to obtain functional products.

In the last decades, edible films based on whey proteins have become promising eco-friendly materials that can be used as carriers for some bioactive substances such as nutrients and antioxidant agents. Spirulina, one of the best-known cyanobacteria, are a rich source of nutritional compounds with beneficial health effects. Edible films from whey protein concentrates (WPC) were developed applying different treatments, such as water-bath heating for 30 min at 75 °C and ultrasound treatment in a common ultrasonic bath for 15 min at 70 °C with the addition of a commercial spirulina powder. WPC-based edible films were prepared with the addition of spirulina in different concentrations. Other edible microalgae such as commercial chlorella and ulva have also been examined for the production of edible films. After production, the films were characterized according to their physicochemical properties (thickness, moisture content, solubility in water, degree of swelling), optical parameters (Fourier transform infrared spectrum), tensile properties, and antioxidant activity.

Bacterial cellulose (BC) based on sago liquid waste has been developed to be used as food packaging. This study investigated the physicochemical and mechanical properties of modified BC film and its application as food packaging. The modified BC film performed carboxymethyl cellulose (CMC) as a stabilizer and glycerol as a plasticizer. Films were prepared by casting technique using BC as the primary material and composites with various concentrations of CMC and glycerol (0.5%, 1%, and 1.5%, v/v). BC film was applied as the packaging of meat sausage, and the quality of meat sausage was measured based on weight loss, moisture content, pH, protein content, and total microbial count. The addition of CMC and glycerol influences the physical and mechanical properties of BC composites film. The best mechanical properties of edible BC film were collected by adding 1% CMC and 1% glycerol with a tensile strength of 17.47 MPa, elongation at a break of 25.60%, and Young’s modulus of 6.54 GPa. FTIR analysis showed the characteristic bands of BC, and the addition of CMC and glycerol slightly changed the FTIR spectrum of the composites. The utilization of modified BC-based sago liquid waste film as the packaging of meat sausage could maintain sausage quality during 6 days of storage at room temperature. Therefore, edible BC film has the potential to be used as food packaging.

In this study, edible packaging based on discarded green banana (Musa acuminata AAA) flour (whole banana and banana peel flours) was developed for food applications. Films were characterized in terms of film-forming ability, mechanical, barrier, thermal, microbiological, and sensory properties. The film forming solutions were studied for rheological properties. Two formulations were selected based on their film-forming ability: whole banana flour (2.5%), peel flour (1.5%) and glycerol (1.0 %, F-1.0 G or 1.5%, F-1.5 G). Adding 1.5% plasticizer, due to the hygroscopic effect, favored the water retention of the films, increasing the density, which also resulted in a decrease in lightness and transparency. Water activity shows no difference between the two formulations, which were water resistant for at least 25 h. DSC results showed a similar melting temperature (Tm) for both films, around 122 °C. Both films solutions showed a viscoelastic behavior in the frequency spectrum, being the elastic modulus greater in F-1.0 G film than F-1.5 G film at low frequency. F-1.0 G film was less firm, deformable and elastic, with a less compact structure and a rougher surface as confirmed by AFM, favoring a higher water vapor permeability with respect to F.1.5 G film. Microorganisms such as Enterobacteria and Staphylococcus aureus were not found in the films after a period of storage (1 year under ambient conditions). The F-1.0 G film with added spices (cumin, oregano, garlic, onion, pepper, and nutmeg) was tested for some food applications: as a snack (with or without heat treatment) and as a wrap for grilled chicken. The performance of the seasoned film during chilled storage of chicken breast was also studied. Sensory evaluation showed good overall acceptability of all applications. In addition, the chicken breast wrapped with the seasoned film registered lower counts (1-log cycle) than the control (covered with a polystyrene bag) and the film without spices. Green banana flour is a promising material to develop edible films for food applications.

New food packaging has shown research significance in the face of increasing demand for high-quality foods and growing attention paid to food safety. In this study, ginger essential oil microcapsule composite films were prepared by combining microcapsules prepared by a complex coacervation method with gelatin films, and the mechanical properties and active functions of the composite films were analyzed. Fourier-transform infrared spectroscopy and differential scanning calorimetry confirmed the successful encapsulation of ginger essential oil. The scanning electron microscopy of the composite films showed the microcapsules and gelatin film matrix were highly compatible. During the entire storage period, the antioxidant capacity of the ginger essential oil microcapsule films weakened more slowly than ginger essential oil microcapsules and could be maintained at a relatively high level for a long time. The microcapsule films had excellent inhibitory effects on Escherichia coli, Staphylococcus aureus, and Bacillus subtilis. Therefore, the direct addition of microcapsules to a film matrix can broaden the application range of microcapsules and increase the duration of the release of active ingredients. Ginger essential oil microcapsule films are potential biodegradable food packaging films with long-lasting activity.

The objective of this work was to obtain and characterize sodium alginate-based biopolymer films with the addition of cashew nut shell liquid (CNSL). The study employed a completely randomized design, including 0%, 0.5%, 1%, and 1.5% inclusion of CNSL. Uniform formation of the films was observed, and the addition of CNSL provided better thermal resistance than did the treatment without inclusion, while the addition of CNSL reduced the homogeneity of the microstructure, especially for the 1.5% inclusion level. The permeability of the film increased as the level of CNSL increased, especially in response to the concentrations of 1% and 1.5%, and no significant difference in permeability was observed between these treatments. The tensile strength decreased proportionally as a function of the addition of CNSL, as its inclusion increased the elasticity and elongation of the films. In addition, the films with CNSL demonstrated strong antioxidant activity and discrete antimicrobial activity, and ecotoxicity analysis showed that the levels of CNSL tested and the films produced were nontoxic. Thus, these films are promising and self-sustainable alternatives for the agrifood industry.

The present investigation studied the physicochemical, mechanical, structural, thermal, and morphological attributes of a novel edible film formed from fenugreek protein concentrate. Films were produced at different pH—9, 10, 11, and 12—and the effect of the pH on the films was studied. As the pH increased, tensile strength increased while water vapor absorption decreased, which is interrelated to the surface morphological properties; as the pH increased, the surface became smoother and compact without any cavities. The films produced were darker in color. Fenugreek protein films exhibited good thermal stability. Fourier transform infrared spectroscopy (FTIR) revealed the presence of strong bonding for the films made at alkaline pH. X-ray diffraction analysis (XRD) indicated the major structure of the film was amorphous. The study demonstrated that the fenugreek protein concentrate film has influential characteristics and can be used as an edible packaging film.

Protein-based biodegradable packaging films are of environmental significance. The effect of oxidized ferulic acid (OFA)/tannic acid (OTA) on the crosslinking and film-forming properties of whey protein isolate (WPI) was investigated. Both of the oxidized acids induced protein oxidation and promoted WPI crosslinking through the actions of quinone carbonyl and protein sulfhydryl, and amino groups. OTA enhanced the tensile strength (from 4.5 MPa to max 6.7 MPa) and stiffness (from 215 MPa to max 376 MPa) of the WPI film, whereas OFA significantly increased the elongation at break. The water absorption capability and heat resistance of the films were greatly improved by the addition of OTA. Due to the original color of OTA, the incorporation of OTA significantly reduced light transmittance of the WPI film (λ 200–600 nm) as well as the transparency, whereas no significant changes were induced by the OFA treatment. Higher concentrations of OTA reduced the in vitro digestibility of the WPI film, while the addition of OFA had no significant effect. Overall, these two oxidized polyphenols promoted the crosslinking of WPI and modified the film properties, with OTA showing an overall stronger efficacy than OFA due to more functional groups available.

Despite being widely consumed and appreciated, fried food has the unhealthy characteristic of high final oil content. Therefore, alternatives to reduce the oil uptake of fried products are being researched. The aim of this study was to investigate the effect of 0.5% methyl cellulose and 0.5% kappa-carrageenan edible films, as well as different frying procedure parameters, such as oil temperatures (from 150 to 180 °C), and thickness of slices (from 2 to 6 mm) on the oil uptake of whole fried mushrooms and their parts. The results showed a lower final oil content when lower frying temperature and thicker slices are applied. Hydrocolloid suspensions of methyl cellulose and kappa-carrageenan, used as edible coatings, were effective at reducing moisture evaporation and, consequently, oil uptake independently of the hydrocolloid temperature. A reduction of 10–22% in the final oil content was achieved. Adjusting the frying parameters and the use of methyl cellulose or kappa-carrageenan as an edible coating were useful strategies to reduce the oil uptake in fried products.

In the present study, pomegranate peel extract was used as a reinforcing agent in developing chitosan-based edible film. Different concentrations (0.2 g/mL, 0.4 g/mL, 0.6 g/mL, 0.8 g/mL, and 1.0 g/mL) of pomegranate peel extract were incorporated in chitosan-based edible film. A neat chitosan film was used as a control. This work covers the effect of pomegranate peel extract on the physical, biological, mechanical, thermal, and barrier properties of enriched chitosan-based edible film. The results showed that the thickness (0.142–0.159 mm), tensile strength (32.45–35.23 MPa), moisture (11.23–15.28%), opacity (0.039–0.061%), water (1.32–1.60 g·mm/m2), gas barrier properties (93.81–103.45 meq/kg), phenolic content (5.75–32.41 mg/g), and antioxidant activity (23.13–76.54%) of the films increased with increasing volume fraction of pomegranate peel extract. A higher concentration of incorporated pomegranate peel extracts significantly (p < 0.05) reduced the thermal stability of the film, along with its transparency, solubility, swelling, and color. This work revealed that the incorporation of a higher portion of pomegranate peel extract in chitosan film holds significant (p < 0.05) potential for the increase in biological activities of such films in terms of antioxidant and antimicrobial behavior. The properties of pomegranate peel extract-enriched chitosan films could be an excellent cure for free radicals, whereas they could also inhibit the growth of the foodborne pathogens during the processing and preservation of the food. Further studies are needed for the application of pomegranate peel extract-enriched edible films on food products such as fruits and vegetables in order to extend their storage life and improve the quality and safety of preserved food products.

Antioxidant polyphenols in black tea residue are an underused source of bioactive compounds. Microencapsulation can turn them into a valuable functional ingredient for different food applications. This study investigated the potential of using spent black tea extract (SBT) as an active ingredient in food packaging. Free or microencapsulated forms of SBT, using a pectin–sodium caseinate mixture as a wall material, were incorporated in a cassava starch matrix and films developed by casting. The effect of incorporating SBT at different polyphenol contents (0.17% and 0.34%) on the structural, physical, and antioxidant properties of the films, the migration of active compounds into different food simulants and their performance at preventing lipid oxidation were evaluated. The results showed that adding free SBT modified the film structure by forming hydrogen bonds with starch, creating a less elastic film with antioxidant activity (173 and 587 µg(GAE)/g film). Incorporating microencapsulated SBT improved the mechanical properties of active films and preserved their antioxidant activity (276 and 627 µg(GAE)/g film). Encapsulates significantly enhanced the release of antioxidant polyphenols into both aqueous and fatty food simulants. Both types of active film exhibited better barrier properties against UV light and water vapour than the control starch film and delayed lipid oxidation up to 35 d. This study revealed that starch film incorporating microencapsulated SBT can be used as a functional food packaging to protect fatty foods from oxidation.

Scale gelatin films derived from croaker fish and infused with Prosopis ( Prosopis cineraria ) extract (PE) at concentrations of 0.3% and 0.7% were produced. A control film, void of extract, was employed for comparative purposes. The thickness of each film was found to be statistically insignificant ( p > 0.05). The results show that the highest solubility (78.57 ± 3.57%) was found for the glycerol film, and the least permeability was found for the water vapor (0.74 ± 0.09 ×10 -10 g s -1 m -1 Pa -1 ); however, the water vapor permeability (WVP) and water solubility (WS) of the films that contained PE were considerably lower than those of the control film ( p < 0.05). In contrast to the control film, those infused with 0.7% PE exhibited exceptional UV-barrier properties (>99%) and favorable thermal characteristics. The highest and lowest antioxidant activities were found for the 7% Prosopis cineraria extract (56.96 ± 2.6%) and the glycerol film (40.66 ± 2.46%), respectively. No antibacterial activity was observed in these films. Microscopic pictures showed that all three films had a uniform and plain surface. Fourier transform infrared spectroscopy-attenuated total reflectance (FTIR-ATR) analysis revealed distinct amide bands and protein-polyphenol interactions within the films that contained the extract.

The growing interest from consumers toward healthy and nutritious products and their benefits for health has increased the consumption of whole and processed fish. One of the main problems of fish is the short shelf life, especially when it is processed as in the case of burgers. The use of edible coating is an interesting strategy to extend the quality and safety of the product, reducing the need for artificial preservatives. This study evaluated the use of chitosan-based edible film formulated with sea fennel plant and sea fennel extracts. The analyses showed than the use of edible film extended the shelf life of fish burgers regardless of the incorporation of sea fennel mainly associated to the gas barrier properties and selective permeability of the film applied to the fish surface. The incorporation of sea fennel in the films did not produce any antimicrobial enhancement, although sea fennel (mostly extract) produced a better pH and enhanced the antioxidant properties and lipid oxidation of fish burgers. However, sensory analyses showed than fish burgers coated with sea fennel film plant had better acceptability than those with sea fennel extracts, probably due to the better odour and colour of the whole plant during storage. The study showed that the use of sea fennel plant at 12.5% extended the shelf life of fish burgers using a safe and clean label strategy.

This study was aimed at creating new films and determine some functional packaging properties of pectin:nanochitosan films with ratios of pectin:nanochitosan (P:NSC) of 100:0; 75:25; 50:50; 25:75 and 0:100 (%w/w). The effects of the proportions of pectin:nanochitosan incorporation on the thickness, mechanical properties, water vapor permeability, water-solubility, and oxygen permeability were investigated. The microstructural studies were done using scanning electron microscopy (SEM). The interactions between pectin and nanochitosan were elucidated by Attenuated total reflectance-Fourier transform infrared (ATR-FTIR). The results showed that the blending of pectin with nanochitosan at proportions of 50:50 increased the tensile strength to 8.96 MPa, reduced the water solubility to 37.5%, water vapor permeability to 0.2052 g·mm/m2·day·kPa, and the oxygen permeability to 47.67 cc·mm/m2·day. The results of the contact angle test indicated that P:NCS films were hydrophobic, especially, pectin:nanochitosan films inhibited the growth of Colletotrichum gloeosporioides, Saccharomyces cerevisiae, Aspergillus niger, and Escherichia coli. So, P:NCS films with a proportion of 50:50 can be used as active films to extend the shelf life of food.

In vitro meat is a novel concept of food science and biotechnology. Methods to produce in vitro meat employ muscle cells cultivated on a scaffold in a serum-free medium using a bioreactor. The microstructure of the scaffold is a key factor, because muscle cells must be oriented to generate parallel alignments of fibers. This work aimed to develop a new scaffold (microstructured film) to grow muscle fibers. The microstructured edible films were made using micromolding technology. A micromold was tailor-made using a laser cutting machine to obtain parallel fibers with a diameter in the range of 70−90 µm. Edible films were made by means of solvent casting using non-mammalian biopolymers. Myoblasts were cultured on flat and microstructured films at three cell densities. Cells on the microstructured films grew with a muscle fiber morphology, but in the case of using the flat film, they only produced unorganized cell proliferation. Myogenic markers were assessed using quantitative polymerase chain reaction. After 14 days, the expression of desmin, myogenin, and myosin heavy chain were significantly higher in microstructured films compared to the flat films. The formation of fiber morphology and the high expression of myogenic markers indicated that a microstructured edible film can be used for the production of in vitro meat.

Medicinal plants contain various secondary metabolites. The present study analyzed the essential oil of buds from clove (Syzygium aromaticum L.; Family: Myrtaceae) using gas chromatography-mass spectrometry (GC-MS). GC-MS analysis showed the presence of six major phytoconstituents, such as eugenol (66.01%), caryophyllene (19.88%), caryophyllene oxide (5.80%), phenol, 2-methoxy-4-(2-propenyl)-acetate (4.55%), and humulene (3.75%). The effect of clove essential oils (CEO) at 0%, 1%, 2%, and 3% (w/w) on the mechanical and barrier properties of starch films was evaluated. The tensile strength (TS) and elongation (E) of films with clove essential oil were 6.25 ± 0.03 MPa and 5.67% ± 0.08%, respectively. The antioxidant activity of the films significantly increased the millet starch film and presented the lowest antioxidant activity (0.3%) at a 30 minute incubation for the control sample, while increasing CEO fraction in the starch film lead to an increase in antioxidant activity, and the 3% CEO combined film presented the highest antioxidant activity (15.96%) at 90 min incubation. This finding could be explained by the incorporation of clove oil containing antioxidant properties that significantly increased with the incorporation of CEO (p < 0.05). A zone of inhibition ranging from 16 to 27 mm in diameter was obtained when using a concentration of CEO ranging from 1% to 3%. We also observed the presence of an antimicrobial activity on several tested microorganism including Escherichia coli, Pseudomonas aeruginosa, Enterobacter sp, Bacillus cereus, Staphylococcus aureus, and Trichoderma fungi. Thus, the current study reveals the possibility of using a millet starch edible film as a preservation method.

The development of edible films based on the natural biopolymer feather keratin (FK) from poultry feathers is of great interest to food packaging. Edible dialdehyde carboxymethyl cellulose (DCMC) crosslinked FK films plasticized with glycerol were prepared by a casting method. The effect of DCMC crosslinking on the microstructure, light transmission, aggregate structure, tensile properties, water resistance and water vapor barrier were investigated. The results indicated the formation of both covalent and hydrogen bonding between FK and DCMC to form amorphous FK/DCMC films with good UV-barrier properties and transmittance. However, with increasing DCMC content, a decrease in tensile strength of the FK films indicated that plasticization, induced by hydrophilic properties of the DCMC, partly offset the crosslinking effect. Reduction in the moisture content, solubility and water vapor permeability indicated that DCMC crosslinking slightly reduced the moisture sensitivity of the FK films. Thus, DCMC crosslinking increased the potential viability of the FK films for food packaging applications, offering a value-added product.

Pomegranate (Punica granatum L.) seed juice by-product (PSP) was added as reinforcing and antimicrobial agent to fish gelatin (FG) films as a promising eco-friendly active material for food packaging applications. A complete linkage analysis of polysaccharides in PSP showed xylan and cellulose as main components. This residue showed also high total phenolic content and antioxidant activity. Three formulations were processed by adding PSP to FG (0, 10, 30 wt. %) by the casting technique, showing films with 10 wt. % of PSP the best performance. The addition of PSP decreased elongation at break and increased stiffness in the FG films, particularly for 30 wt. % loading. A good compatibility between FG and PSP was observed by SEM. No significant (p < 0.05) differences were obtained for barrier properties to oxygen and water vapour permeability compared to the control with the incorporation of PSP, whereas water resistance considerably increased and transparency values decreased (p < 0.05). High thermal stability of films and inhibition against S. aureus were observed. The addition of PSP at 10 wt. % into FG was shown as a potential strategy to maintain the integrity of the material and protect food against lipid oxidation, reducing huge amounts of pomegranate and fish wastes.

The significant concerns associated with the widespread use of petroleum-based plastic materials have prompted substantial research on and development of active food packaging materials. Even though fish gelatin-based films are appealing as active food packaging materials, they present practical production challenges. Therefore, this study aimed to develop an edible film using Ficus carica L. leaf extract (FLE), as it is affordable, accessible, and has superoxide anion radical scavenging action. This edible film was produced by adding FLE to mackerel skin gelatin at varied concentrations (2.5-10% w / w ). The results showed that adding FLE to gelatin films significantly affected the tensile strength (TS), elongation at break (EAB), transmittance and transparency, solubility, water vapor permeability (WVP), antioxidant activity, and antibacterial activity. Among all the samples, the most promising result was obtained for the edible film with FLE 10%, resulting in TS, EAB, solubility, WVP, antioxidant activity, and antibacterial activity against S. aureus and E. coli results of 2.74 MPa, 372.82%, 36.20%, 3.96 × 10 -11 g/msPa, 45.49%, 27.27 mm, and 25.10 mm, respectively. The study's overall findings showed that fish gelatin-based films incorporated with FLE are promising eco-friendly, biodegradable, and sustainable active packaging materials.

Thin casein films for food packaging applications reportedly possess good strength and low oxygen permeability, but low elasticity and high sensitivity to moisture. Modifying the films to target specific behaviors depending on environmental conditions can enable a variety of commercial applications for casein-based films. The mechanical properties of solvent-cast (15% solids) calcium-caseinate/glycerol films (CaCas:Gly ratio of 3:1) were characterized as a function of processing and environmental conditions, including film thickness, solution formulation and ambient humidity (from 22% to 70% relative humidity (RH) at ~20 °C). At constant RH, the elongation at break (EAB) had a strong positive dependence on the film thickness. When RH increased, the tensile strength (TS) and modulus (E) decreased approximately linearly, while EAB increased. From 0.05% to 1% (w/w) of citric pectin (CP) was then incorporated into CaCas/Gly films following seven different formulations (mixing sequences), to alter the protein network and to evaluate the effects of CP on the tensile properties of CaCas/Gly/CP films. At constant film thickness and ~60% RH, the addition of 0.1% or 1.0% CP to the films considerably increased or decreased EAB, TS and E in different directions and to different extents, depending on the formulation, while optical micrographs also showed vastly differing network configurations, suggesting complex formulation- and stoichiometry-dependent casein-pectin interactions within the dried films. Depending on the desired film properties and utilization conditions, pectin may be a useful addition to casein film formulations for food packaging applications.