Search

High-speed elevator systems comprise numerous components, and vibration issues are prevalent. The evident non-linear behavior resulting from changes in the wire rope length adds complexity to the investigation of elevator dynamics issues. This paper investigates dynamics modeling and numerical solution methods for longitudinal vibrations in a typical high-speed elevator system. The primary contributions of this paper include constructing a dynamics model for high-speed elevators using a substructure dynamics modeling approach. This model incorporates Newton’s law and the Lagrange equation to comprehensively represent the dynamics of the elevator car, car frame, traction system, and tension system. Additionally, a non-linear dynamics model of the steel wire rope is developed using the centralized mass method. This paper also presents an algorithm to solve the time-domain dynamics based on the variable-step-length Runge–Kutta method. Furthermore, it investigates the non-linear dynamics of elevators considering variations in the elevator’s intrinsic frequency and different elevator control strategies, focusing on the response characteristics of high-speed elevator dynamics. The findings of this thesis hold significant importance in the field of high-speed elevator dynamics. They aid in the design and debugging of high-speed elevator systems and serve as a foundation for future research into the non-linear aspects of elevators.

Exosomes are nano-sized vesicles that contain a variety of mRNAs, miRNAs, and proteins. They are capable of being released by a variety of cells and are essential for cell–cell communication. The exosomes produced by cells have shown protective benefits against spinal cord damage (SCI). Recently, it was discovered that M2 macrophages aid in the angiogenesis of numerous illnesses. However, the functional role of M2 macrophage-derived exosomes on SCI is unclear. Here, we investigate the pro-angiogenesis of M2 macrophage-derived exosomes on SCI. We founded that M2 macrophage exosomes alleviated tissue damage and enhanced functional recovery post-SCI. We discovered that M2 macrophage exosome administration increased angiogenesis after SCI in vivo using immunohistochemistry, immunofluorescence labeling, and Western blot analysis. Additionally, the expression of the pro-angiogenesis factors, HIF-1α and VEGF, were enhanced with the treatment of the M2 macrophage exosomes. Furthermore, we found that M2 macrophage exosomes enhanced neurogenesis after SCI in vivo. In vitro, we found that M2 macrophage exosomes can be taken up by the brain endothelial cell line (bEnd.3) and that they enhanced the tube formation, migration, and proliferation of bEnd.3 cells. Furthermore, by using special siRNA to inhibit HIF-1α expression, we observed that the expression of VEGF decreased, and the tube formation, migration, and proliferation of bEnd.3 cells were attenuated with the treatment of HIF-1α-siRNA. In conclusion, our findings reveal that M2 macrophage exosomes improve neurological functional recovery and angiogenesis post-SCI, and this process is partially associated with the activation of the HIF-1/VEGF signaling pathway.

The present study was conducted to investigate the effects of dietary yeast culture (YC) supplementation on growth performance, nutrient digestibility, blood metabolites, and immune functions in geese. One-day-old Sichuan white geese (n = 300) were randomly divided into five groups containing 0 (control), 0.5%, 1.0%, 2.0%, and 4.0% of YC in the diet for 70 days. In general, the dietary supplementation of YC significantly increased the average daily gain and feed conversion ratio (p < 0.05) in which the 1.0% or 2.0% levels were better and significantly reduced the average daily feed intake at the 2.0% level (p < 0.05). YC supplementation increased digestibility of P (quadratic, p = 0.01) and gross energy (quadratic, p = 0.04) from days 23 to 27 and crude protein from days 23 to 27 and days 64 to 68 (quadratic, p ≤ 0.05), with the 2.0% level being the most effective. Serum metabolites were significantly affected by dietary YC (p < 0.05). Supplemental YC increased IL-2 on day 28 (linear, p = 0.01; quadratic, p = 0.04) and lysozyme on day 70 (quadratic, p = 0.04) and decreased complement C4 on day 70 (linear, p = 0.05). Interferon-γ, interleukin-2, and tumor necrosis factor-α genes were mostly up-regulated after YC supplementation, and interferon-γ and interleukin-2 gene expression levels were significantly increased at the 2.0% level (p < 0.05). Taken together, dietary YC supplementation improved growth performance and affected nutrient digestibility, serum metabolites, and immune function in geese, which was optimized at the 2% YC level in the present study.

In order to explore the influence of the types of waste gypsum on the properties of alkali slag cement, fluorogypsum (FG) and flue-gas desulfurization (FGD) gypsum were comparatively investigated. Moreover, the action mechanisms of FG and FGD gypsum on the properties of alkali slag cement were analyzed. The results show that both the FG and FGD gypsum prolonged the setting time of the alkali slag cement paste. However, the prolongation effect of FG was more pronounced than the FGD gypsum. When the compressive strength was maximum, the contents of FG and FGD gypsum were 5 and 6 wt.%, respectively. At 3 and 28 days, compared to the control sample, the compressive strengths increased by 59.3% and 24.3%, and 66.9% and 33.9%, respectively. Furthermore, the XRD, TG-DTA and SEM-EDS results showed that, with the increase in the contents of FG and FGD gypsum, ettringite was more easily produced and the hydration products were more abundant in the system. The greater the gypsum content of the paste, the less accumulated was the heat of hydration. The change of micro-structure caused by the formation of ettringite was the main reason for the difference in the properties of cement.

In order to improve the early age strength of ordinary Portland cement-based materials, many early strength agents were applied in different conditions. Different from previous research, the nano calcium silicate hydrate (C-S-H) particles used in this study were synthesized through the chemical reaction of CaO, SiO2, and H2O under 120 °C using the hydrothermal method, and the prepared nano C-S-H particles were highly crystalized. The influences of different amounts of nano C-S-H particles (0%, 0.5%, 1%, 2% and 3% by weight of cement) on the setting time, compressive strength, and hydration heat of cement paste were studied. The hydration products and microstructure of the cement paste with different additions of nano C-S-H particles were investigated through thermogravimetry-differential thermal analysis (TG-DTA), X-ray powder diffraction (XRD), and scanning electron microscope (SEM) tests. The results show that the nano C-S-H particles could be used as an early strength agent, and the early strength of cement paste can be increased by up to 43% through accelerating the hydration of tricalcium silicate (C3S). However, the addition of more than 2% nano C-S-H particles was unfavorable to the later strength development due to more space being left during the initial accelerated hydration process. It is suggested that the suitable content of the nano C-S-H particles is 0.5%−1% by weight of cement.

With the depletion and increasing demand of river sand, machine-made sand could be used more and more in concrete. In order to improve the properties of machine-made sand concrete, the effects of the aggregate micro fines (AMF) content, aluminum sulfate, and polypropylene fibers (PPF) on the slump, compressive strength, water permeability, and the chloride permeability coefficients were investigated through a single factor test method, and related mechanisms were analyzed. The results show that the optimum contents of AMF, aluminum sulfate, and the polypropylene fiber are 10 wt%, 1 wt%, and 0.6 kg/m3, respectively. The optimum content of AMF improved the compactness of concrete. The addition of aluminum sulfate promoted the initial formation of ettringite, and thereby improved the compressive strength and the permeability resistance. The polypropylene fiber can modify the pore structure distribution of concrete and reduce the porosity, thereby improving the impermeability of the concrete. The compressive strength of the machine-made sand concrete could be increased by more than 20%, and the water/chloride permeability coefficients could be decreased by more than 45%.

Volatile fatty acid derivatives (VFADs) play a significant role in contributing to flowery–fruity flavor black tea. Innovative black tea is typically crafted from aroma-intensive tea cultivars, such as Jinmudan, using defined production methodologies. In this study, the during-processing tea leaves of innovative black tea were applied as materials, and we selected a total of 45 VFADs, comprising 11 derived aldehydes, nine derived alcohols, and 25 derived esters. Furthermore, the dynamic variations of these VFADs were uncovered. Transcriptome analysis was performed to identify genes involved in the LOX (lipoxygenase) pathway, resulting in the identification of 17 CsLOX genes, one hydrogen peroxide lyase (CsHPL) gene, 11 alcohol dehydrogenases (CsADH) genes, 11 genes as acyl CoA oxidase (CsACOX) genes, and three allene oxide synthase (CsAOS) genes. Additionally, the expression levels of these genes were measured, indicating that the processing treatments of innovative black tea, particularly turn-over and fermentation, had a stimulation effect on most genes. Finally, qRT-PCR verification and correlation analysis were conducted to explain the relationship between VFADs and candidate genes. This study aims to provide a reference for illuminating the formation mechanisms of aroma compounds in innovative black tea, thereby inspiring the optimization of innovative processing techniques and enhancing the overall quality of black tea.

A convenient three-step preparation of the dinucleating ligand, 1,6-bis(2-furyl)-2,5-bis(2-hydroxy-3-formyl-5-methylbenzyl)-2,5-diazahexane (3) starting from 2,6-bis(hydroxymethyl)-4-methylphenol (4) is reported. Compound 4 was partially oxidized with preactivated manganese dioxide to form compound 5, which was converted to 2-hydroxy-3-chloromethyl-5-ethylbenzaldehyde (6) with conc.HCl/EtOH. Compound 6 in turn reacted with N,N’-bis (2-furyl)-1,2-diaminoethane (7) in the presence of K2CO3 in ethanol to give the title compound 3. No protecting groups were required in the whole process and the conditions were mild.