Search

In this paper, we propose a noise-robust pulse wave estimation method from near-infrared face video images. Pulse wave estimation in a near-infrared environment is expected to be applied to non-contact monitoring in dark areas. The conventional method cannot consider noise when performing estimation. As a result, the accuracy of pulse wave estimation in noisy environments is not very high. This may adversely affect the accuracy of heart rate data and other data obtained from pulse wave signals. Therefore, the objective of this study is to perform pulse wave estimation robust to noise. The Wiener estimation method, which is a simple linear computation that can consider noise, was used in this study. Experimental results showed that the combination of the proposed method and signal processing (detrending and bandpass filtering) increased the SNR (signal to noise ratio) by more than 2.5 dB compared to the conventional method and signal processing. The correlation coefficient between the pulse wave signal measured using a pulse wave meter and the estimated pulse wave signal was 0.30 larger on average for the proposed method. Furthermore, the AER (absolute error rate) between the heart rate measured with the pulse wave meter was 0.82% on average for the proposed method, which was lower than the value of the conventional method (12.53% on average). These results show that the proposed method is more robust to noise than the conventional method for pulse wave estimation.

Colored product textures correspond to particle size distributions. The microscopic images of colorants must be divided into regions to determine the particle size distribution. The conventional method used for this process involves manually dividing images into areas, which may be inefficient. In this paper, we have overcome this issue by developing two different modified architectures of U-Net convolution neural networks to automatically determine the particle sizes. To develop these modified architectures, a significant amount of ground truth data must be prepared to train the U-Net, which is difficult for big data as the labeling is performed manually. Therefore, we also aim to reduce this process by using incomplete labeling data. The first objective of this study is to determine the accuracy of our modified U-Net architectures for this type of image. The second objective is to reduce the difficulty of preparing the ground truth data by testing the accuracy of training on incomplete labeling data. The results indicate that efficient segmentation can be realized using our modified U-Net architectures, and the generation of ground truth data can be simplified. This paper presents a preliminary study to improve the efficiency of determining particle size distributions with incomplete labeling data.

Photoplethysmographic (PPG) pulses contain information about cardiovascular parameters. In particular, blood pressure can be estimated using PPG pulse decomposition analysis, which assumes that a PPG pulse is composed of the original heart ejection blood wave and its reflections in arterial branchings. Among pulse decomposition wave functions that have been studied in the literature, Gaussian waves are the most successful ones. However, a more adequate pulse decomposition function could be found to improve blood pressure estimates. In this paper, we propose pulse decomposition analysis using hyperbolic secant (sech) waves and compare results with corresponding Gaussian wave decomposition. We analyze how the parameters of each of the two types of decomposition waves correlate with blood pressure. For this analysis, continuous blood pressure data and PPG data were acquired from ten healthy volunteers. The blood pressure of volunteers was varied by asking them to hold their breath for up to 60 s. The results suggested sech wave decomposition had higher accuracy in estimating blood pressure than the Gaussian function. Thus, sech wave decomposition should be considered as a more robust alternative to Gaussian wave pulse decomposition for blood pressure estimation models.

The aim of this study was to propose a method to assess images of the tongue captured using a polarized light camera for diagnostic use in Kampo medicine. Glossy and non-glossy images of the tongue were captured simultaneously using a polarizing camera and a polarizing plate. Data augmentation was performed by modulating the color and gloss, resulting in an increase in the number of images from 11 to 275. To create a data set, the values for which diseases were evaluated by Kampo doctors for all tongue images were taken as the correct values and combined with the features extracted from the tongue images. Using this data set, we constructed a diagnostic support module to evaluate diseases. The resulting mean absolute error of the assessment was 0.44 for qi deficiency, 0.42 for blood deficiency, 0.33 for blood stagnation, 0.36 for yin deficiency, and 0.55 for fluid stagnation, suggesting that the diagnostic assistance module was accurate, and our proposed learning and data augmentation methods were effective.