Search

The purpose of this study is to assess water–polymer interaction in synthesized starch-derived superabsorbent polymer (S-SAP) for the treatment of solid waste sludge. While S-SAP for solid waste sludge treatment is still rare, it offers a lower cost for the safe disposal of sludge into the environment and recycling of treated solid as crop fertilizer. For that to be possible, the water–polymer interaction on S-SAP must first be fully comprehended. In this study, the S-SAP was prepared through graft polymerization of poly (methacrylic acid-co-sodium methacrylate) on the starch backbone. By analyzing the amylose unit, it was possible to avoid the complexity of polymer networks when considering S-SAP using molecular dynamics (MD) simulations and density functional theory (DFT). Through the simulations, formation of hydrogen bonding between starch and water on the H06 of amylose was assessed for its flexibility and less steric hindrance. Meanwhile, water penetration into S-SAP was recorded by the specific radial distribution function (RDF) of atom–molecule interaction in the amylose. The experimental evaluation of S-SAP correlated with high water capacity by measuring up to 500% of distilled water within 80 min and more than 195% of the water from solid waste sludge for 7 days. In addition, the S-SAP swelling showed a notable performance of a 77 g/g swelling ratio within 160 min, while a water retention test showed that S-SAP was capable of retaining more than 50% of the absorbed water within 5 h of heating at 60 °C. The water retention of S-SAP adheres to pseudo-second-order kinetics for chemisorption reactions. Therefore, the prepared S-SAP might have potential applications as a natural superabsorbent, especially for the development of sludge water removal technology.

The biggest challenge faced in oil refineries is the removal of sulfur compounds in fuel oil. The sulfur compounds which are found in fuel oil such as gasoline and diesel, react with oxygen in the atmosphere to produce sulfur oxide (SOx) gases when combusted. These sulfur compounds produced from the reaction with oxygen in the atmosphere may result in various health problems and environmental effects. Hydrodesulfurization (HDS) is the conventional process used to remove sulfur compounds from fuel oil. However, the high operating conditions required for this process and its inefficiency in removing the organosulfur compounds turn to be the major drawbacks of this system. Researchers have also studied several alternatives to remove sulfur from fuel oil. The use of ionic liquids (ILs) has also drawn the interest of researchers to incorporate them in the desulfurization process. The environmental effects resulting from the use of these ILs can be eliminated using eutectic-based ionic liquids (EILs), which are known as greener solvents. In this research, a combination of extractive desulfurization (EDS) and oxidative desulfurization (ODS) using a photocatalyst and EIL was studied. The photocatalyst used is a pre-reported catalyst, Cu-Fe/TiO2 and the EIL were synthesized by mixing choline chloride (ChCl) with organic acids. The acids used for the EILs were propionic acid (PA) and p-toluenesulfonic acid (TSA). The EILs synthesized were characterized using thermogravimetry analyser (TGA) differential scanning calorimetry (DSC) analysis to determine the physical properties of the EILs. Based on the TGA analysis, ChCl (1): PA (3) obtained the highest thermal stability whereas, as for the DSC analysis, all synthesized EILs have a lower melting point than its pure component. Further evaluation on the best EIL for the desulfurization process was carried out in a photo-reactor under UV light in the presence of Cu-Fe/TiO2 photocatalyst and hydrogen peroxide (H2O2). Once the oxidation and extraction process were completed, the oil phase of the mixture was analyzed using high performance liquid chromatography (HPLC) to measure the sulfur removal efficiency. In terms of the desulfurization efficiency, the EIL of ChCl (1): TSA (2) showed a removal efficiency of about 99.07%.

Polycyclic aromatic hydrocarbons (PAHs) and phenolic compounds had been widely recognized as priority organic pollutants in wastewater with toxic effects on both plants and animals. Thus, the remediation of these pollutants has been an active area of research in the field of environmental science and engineering. This review highlighted the advantage of adsorption technology in the removal of PAHs and phenols in wastewater. The literature presented on the applications of various porous carbon materials such as biochar, activated carbon (AC), carbon nanotubes (CNTs), and graphene as potential adsorbents for these pollutants has been critically reviewed and analyzed. Under similar conditions, the use of porous polymers such as Chitosan and molecularly imprinted polymers (MIPs) have been well presented. The high adsorption capacities of advanced porous materials such as mesoporous silica and metal-organic frameworks have been considered and evaluated. The preference of these materials, higher adsorption efficiencies, mechanism of adsorptions, and possible challenges have been discussed. Recommendations have been proposed for commercialization, pilot, and industrial-scale applications of the studied adsorbents towards persistent organic pollutants (POPs) removal from wastewater.

This work compared the effect of soaking and roasting Phoenix dactylifera L. seeds pretreatment methods on oil yield. The conversion of the Phoenix dactylifera L. seed oil to fatty acid methyl ester (FAME) was conducted via transesterification reaction using Ce-Zr/Al-MCM-41 monometallic and bimetallic catalysts. The reaction conditions were optimized using response surface methodology based on the central composite design (RSM-CCD). The result shows a quadratic model fitting with an R2 value of ~0.98% from the analysis of variance. In addition, the optimum FAME yield of 93.83% was obtained at a reaction temperature of 60.5 &deg, C, a reaction time of 3.8 h, a catalyst concentration of 4 wt.%, and a methanol to oil molar ratio of 6.2:1 mol/mol. The effect of the regenerated catalyst was significantly maintained for five cycles. The fuel properties of the produced FAME lie within the values reported in studies, ASTM D6751, and EN14214 standards.

Injection of alkaline (A), polymer (P), and surfactant (S) chemicals in enhanced oil recovery (cEOR) processes increases output by changing the properties of the injected fluid. In this work, micellar fluid interactions were studied via microemulsion rheological analysis. Crude oil and stimulated brine with ASP or SP was used for bottle testing. The results revealed that no microemulsion was produced when ASP (Alkaline, Surfactant, and Polymer) or SP (Surfactant and Polymer) was left out during the bottle testing phase. The addition of ASP and SP led to the formation of microemulsions&mdash, up to 29% for 50% water cut (WC) ASP, and 36% for 40% WC SP. This shows that the addition of ASP and SP can be applied to flooding applications. The results of the rheological analysis show that the microemulsions behaved as a shear-thinning micellar fluid by decreasing viscosity with increase in shear rate. As per the power-law equation, the ASP micellar fluid viscoelastic behavior shows better shear-thinning compared to SP, suggesting more efficiency in fluid mobility and sweep efficiency. Most of the microemulsions exhibited viscoelastic fluid behavior (G&rsquo, = G&rdquo, ) at angular frequency of 10 to 60 rad s&minus, 1, and stable elastic fluid behavior (G&rsquo, &gt, G&rsquo, &rsquo, ) below 10 rad s&minus, 1 angular frequency. The viscosity of microemulsion fluids decreases as temperature increases, this indicates that the crude oil (i.e., alkanes) was solubilized in core micelles, leading to radial growth in the cylindrical part of the wormlike micelles, and resulting in a drop in end-cap energy and micelle length. No significant difference was found in the analysis of viscoelasticity evaluation and viscosity analysis for both ASP and SP microemulsions. The microemulsion tendency test and rheology test show that the addition of ASP and SP in the oil-water interface yields excellent viscoelastic properties.

The removal of H2S and CH4 from natural gas is crucial as H2S causes environmental contamination, corrodes the gas stream pipelines, and decreases the feedstock for industrial productions. Many scientific researches have shown that the metal-organic framework (MOF)/ionic liquids (ILs) have great potential as alternative adsorbents to capture H2S. In this work, molecular dynamics (MD) simulation was carried out to determine the stability of ILs/IRMOF-1 as well as to study the solubility of H2S and CH4 gases in this ILs/IRMOF-1 hybrid material. Three choline-based ILs were incorporated into IRMOF-1 with different ratios of 0.4, 0.8, and 1.2% w/w, respectively, in which the most stable choline-based ILs/IRMOF-1 composite was analysed for H2S/CH4 solubility selectivity. Among the three choline-based ILs/IRMOF-1, [Chl] [SCN]/IRMOF-1 shows the most stable incorporation. However, the increment of ILs loaded in the IRMOF-1 significantly reduced the stability of the hybrid due to the crowding effect. Solvation free energy was then computed to determine the solubility of H2S and CH4 in the [Chl] [SCN]/IRMOF-1. H2S showed higher solubility compared to CH4, where its solubility declined with the increase of choline-based IL loading.

This work presents a molecular level investigation on the nature and mode of binding between imidazolium-based ionic liquids (ILs) ([Cnbim]Br where n = 2, 4, 6) with calf thymus DNA. This investigation offers valuable insight into the mechanisms of interactions that can affect the structural features of DNA and possibly cause the alteration or inhibition of DNA function. To expedite analysis, the study resorted to using molecular docking and COnductor like Screening MOdel for Real Solvents (COSMO-RS) in conjunction with fluorescence spectroscopic data for confirmation and validation of computational results. Both the fluorescence and docking studies consistently revealed a weak interaction between the two molecules, which corresponded to the binding energy of a stable docking conformation in the range of &minus, 5.19 to &minus, 7.75 kcal mol&minus, 1. As predicted, the rod-like structure of imidazolium-based ILs prefers to bind to the double-helix DNA through a minor groove. Interestingly, the occurrence of T-shape &pi, &pi, stacking was observed between the amine group in adenine that faces the aromatic ring of imidazole. In addition, data of COSMO-RS for the interaction of individual nucleic acid bases to imidazolium-based ILs affirmed that ILs showed a propensity to bind to different bases, the highest being guanine followed by cytosine, thymine, uracil, and adenine.