Search

Direct electric curing (EC) is a new green curing method for cement-based materials that improves the early mechanical properties via the uniform high temperature produced by Joule heating. To understand the effects of EC and steam curing (SC) on the mechanical properties and microstructure of cement-based materials, the mortar was cured at different temperature-controlled curing regimes (40°C, 60°C and 80°C). Meanwhile, mechanical properties, hydrate phase and pore structure of specimens were investigated. The energy consumption of two curing methods was compared and analyzed. The results show that the EC specimens have better and more stable growth of mechanical strength. The pore structure of EC specimen is also better than that of SC specimen at different maintenance ages. However, the hydration degree and products of samples cured by EC are similar to that SC samples. The energy consumption of EC is lower than SC. This study provides an important technical support for the EC in the production of energy-saving and high early-strength concrete precast components.

In order to study the synergistic effects of organic and inorganic thickening agents on the rheological properties of cement paste, the rheological parameters, thixotropy cement-paste containing limestone powder (LP), re-dispersible polymer powder (RPP), and hydroxypropyl methylcellulose ether (HPMC) were investigated using the Anton Paar MCR 102 rheometer at different resting times. The early-age hydration process, hydration products, and microstructure were also analyzed with scanning electron microscopy (SEM) and thermogravimetry analyses (TGA). The results showed that the addition of LP, RPP, and HPMC affected the rheological properties of cement paste, but the thickening mechanism between organic and inorganic thickening agents was different. The small amount of LP increased the plastic viscosity but decreased the yield stress of cement paste due to its dense filling effect. Adding 1% of RPP improved the thixotropic property of cement paste by 50%; prolonging the standing time could improve the thixotropic performance by as much as two times. Only 0.035% HPMC added to the cement paste increased the plastic viscosity by 20%, while the yield stress increased nearly twice. The more HPMC added, the more significant effect it showed. Cement paste compounds with LP, RPP, and HPMC balanced the yield stress and plastic viscosity and improved the thixotropy. The C-L6-R1.0-H0.035 paste presented as a pseudoplastic, its rheological indexes were close to one, and it was hardly affected by the resting time. The composite superposition effect of organic and inorganic thickening agents reduced the impact of resting time for all pastes. As the organic thickening component inhibited the hydration more than the LP promoted the hydration of the cement paste, indicating that the C-L6-R1.0-H0.035 paste remained in the particle fusion stage after curing for three days, as shown by the SEM images.

Effective foundation reinforcement treatment is essential for modern large and complex infrastructure, while it is significant for developing new green high-performance materials for foundation reinforcement. This study investigates a new green concrete by using high volume fly-ash and coal gangue aggregates, which is expected to apply for foundation treatment of modern infrastructure with high loading-bear ability. In this experiment, 12 mix proportions of fly ash coal gangue mixture (the material name, abbreviated FGM) were designed, and its mechanical properties and durability performance were investigated. The mechanical properties of FGM include compressive strength, dynamic elastic modulus, dynamic shear modulus, Poisson&rsquo, s ratio, and the stress&ndash, strain behaviors. The durability performance was evaluated by the parameters of acid resistance, which simulated an acid circumstance. After that, the environmental effects about carbon emission of this material were also investigated. Results show that the FGM with 84.6% wastes utilizing rate is a cost-effective material for foundation reinforcing treatment. Its compressive strength at 28 days and 60 days can reach more than 8 MPa and 10 MPa, respectively. After being immersed in the acid environment for 140 days, the mass loss (%) of the material could be under 3.5%. The greenness shows that the e-CO2 indices of FGM are lower than 20 kg/MPa&middot, m3, and the e-energy indices are at below 150 MJ/MPa&middot, m3. FGM has the advantages of acid resistance, waste recycling, and lower carbon emissions than the previous methods for foundation improvement.

Rheological curves of cement&ndash, fly ash (C&ndash, FA) paste incorporating nanomaterials including nano-SiO2 (NS), nano-CaCO3 (NC) and nano-Al2O3 (NA) at different resting times (hydration time of 5 min, 60 min, and 120 min) were tested with a rheometer. The rheological behaviors were described by the Herschel&ndash, Bulkley (H&ndash, B) model, and the influences of these nanomaterials on rheological properties of C&ndash, FA paste were compared. Results show that the types, content of nanomaterials and resting time have great influences on the rheological properties of C&ndash, FA paste. Incorporating NS and NA increases yield stress and plastic viscosity, and decreases the rheological index of C&ndash, FA paste. When the content of NS and NA were 2 wt%, the rheological index of C&ndash, FA paste was less than 1, indicating rheological behavior changes from shear thickening to shear thinning. Meanwhile, with rising resting time, yield stress and plastic viscosity increased significantly, but the rheological index decreased evidently, showing paste takes on shear thinning due to the rise of resting time. However, incorporating 3 wt% NC and the rising of resting time did not change the rheological properties of C&ndash, FA paste. These differences are mainly that the specific surface area (SSA) of NS (150 m2/g) and NA (120 m2/g) are much larger than that of NC (40 m2/g). The huge SSA of NS and NA consume lots of free water and these tiny particles accelerate the hydration process during resting time.