Search

Shape memory alloy (SMA), a type of smart material, is widely used in the design of reinforcement and repair, isolation, and shock absorption of building structures because of its outstanding characteristics, such as the shape memory effect (SME), superelasticity (SE), and high damping. It not only improves the bearing capacity, ductility, and mechanical properties of the structural components of buildings but can also effectively slow down the strong response of engineering structures under the effect of an earthquake. It plays a key role in energy dissipation and shock absorption as well as sustainable development. To promote the application of SMA in building structures, this paper summarizes the research on the use of SMA as a reinforcing material in building structures, including work related to SMA material characteristics and types, SMA-reinforced structural components, and SMA isolation devices. In addition, the shortcomings of SMA applications in building structures are analyzed, and valuable suggestions for future research methods are put forward. SMA has been applied to engineering practice in the form of embedded and external reinforcement, which shows that it has broad application prospects in future buildings.

In order to trace the research history of diseases and pests in rubber tree and explore the potential for their natural control, a bibliometric analysis was conducted based on relevant documents retrieved from the Clarivate Analytics Web of Science (WoS) core collection SCI-E database. VOSviewer software was utilized to analyze the research distribution, scientific collaboration, knowledge structure, and research frontiers. The results show that annual publications on the diseases and pests of rubber tree have increased rapidly after 2005 after a long period of emergence and fluctuation. A total of 624 relevant publications from 51 countries/regions were identified. China was the most productive country with 152 documents, most of which were related to Colletotrichum leaf disease, powdery mildew, and other emerging diseases of rubber tree. France and Brazil produced rich research to tackle South American leaf blight, and have established a close collaborative relationship. Based on the analysis of themes and trend topics, pathogenicity mechanisms of fungal pathogens and plant defense mechanisms are currently hot topics. By further looking into the research, the defense-related genes of rubber tree and antagonistic mechanisms behind candidate biocontrol agents reveal great potential in developing natural control strategies. This study provides a useful reference about the progress and evolution of research into diseases and pests in rubber tree.

In this paper, experiments and finite element analysis methods were adopted to study the flexural performance of shape memory alloy hybrid composites (SMAHC). The effect of embedding content and position of shape memory alloy (SMA) wire on the flexural properties of composite laminates was analyzed, and the optimal content and position of SMA wire were obtained. The optimal number of SMA wires for SMAHC laminates (B-2) is four. Compared with GFRP laminates, the flexural modulus of B-2-4 laminates increases by 5.19%, while the strength decreases by 5.76% on average. The finite element model of the SMAHC laminate was established by using ABAQUS finite element analysis software, and the validity of the model was verified by the comparison between the simulation results and the experimental results. The microscopic morphology results show that the weak interface between the matrix and SMA has a certain influence on the flexural performance of SMAHC specimens.

The increasing scale of urbanization and human activities has resulted in the fragmentation of natural habitats, leading to the reduction of ecological landscape connectivity and biodiversity. Taking Nanping as the study area, the core areas with good connectivity were extracted as ecological sources using a morphological spatial pattern analysis (MSPA) and landscape connectivity index. Then the ecosystem service functions of the ecological sources were evaluated based on the InVEST model. Finally, we extracted the potential ecological corridor based on the land type, elevation and ecosystem service functions. The results showed that the ecological source with higher landscape connectivity is distributed in the north and there are clear landscape connectivity faults in the northern and southern regions. Moreover, the areas with high habitat quality, soil retention and water production are mainly distributed in the northern ecological source areas. The 15 potential ecological corridors extracted were distributed unevenly. Among them, the important ecological corridors formed a triangle network, while the general ecological corridors were concentrated in the northwest. Therefore, it is suggested that the important core patches in the north be protected, and the effective connection between the north and south be improved. These results can provide a scientific basis for ecological construction and hierarchical management of the ecological networks.

Shape memory epoxy polymer (SMEP) composite specimens with different graphene oxide (GO) contents were manufactured to study the effects of GO mass fractions on epoxy polymer composites. While ensuring the shape memory effect of SMEP, the addition of GO also remarkably strengthened the mechanical performance of the polymers. Analyses of the epoxy polymer composites’ thermal, mechanical, and shape memory performance were conducted through carrying out dynamic mechanical analysis (DMA), thermogravimetric analysis (TGA), and static tensile, three-point bending, impact, and shape memory tests. Moreover, the tensile fracture, bending fracture, and impact fracture interfaces of epoxy resin composites were examined with scanning electron microscopy. The final test results indicated that when the GO content was 0.8 wt %, SMEP composites had good shape memory performance and optimum thermal and mechanical performance.

The hypersonic flow field around a blunt cone was simulated using a high-order finite difference method. Fast acoustic waves, slow acoustic waves, entropy waves, and vortical waves were introduced into the free-stream to determine the influence of a free-stream with disturbances on the hypersonic flow field and boundary layer. The effect of disturbance type on the evolution of perturbations in the hypersonic boundary layer was analyzed. Fast Fourier Transform was adopted to analyze the effect of the disturbance type on the evolution of different modes in the boundary layer. A roughness element was introduced into the flow field to reveal the impact of the roughness element on hypersonic boundary layer receptivity. The results showed that a free-stream with disturbances affected the hypersonic flow field and boundary layer; acoustic waves had the greatest influence. The impact of slow acoustic waves on the flow field was mainly concentrated in the region between the shock and the boundary layer, whereas the influence of fast acoustic waves was mainly concentrated in the boundary layer. Multi-mode perturbations formed in the boundary layer were caused by the free-stream with disturbances, wherein the fundamental mode was the dominant mode of the perturbations in the boundary layer caused by fast acoustic waves, entropy waves, and vortical waves. The dominant modes of the perturbations in the boundary layer caused by slow acoustic waves were both the fundamental mode and the second harmonic mode. The roughness element changed the propagation process of different modes of perturbations in the boundary layer. In the downstream region of the roughness element, perturbations in the boundary layer caused by the slow acoustic waves had the greatest influence. The second harmonic mode in the boundary layer was significantly suppressed, and the fundamental mode became the dominant mode. The effects of fast acoustic waves and entropy waves on the boundary layer receptivity were similar, except the amplitude of the perturbations in the boundary layer caused by the fast acoustic waves was larger.

Through studying the effects of the Al⁻5Ti-x(Mg⁻30%Ce) refiner on the microstructure of the Al⁻7Si alloy, we investigated the hardness, tensile, and impact properties of the Al⁻Si alloy before and after refinement. The refinement results show that Mg⁻30%Ce can improve the refinement effect of Al⁻5Ti on Al⁻7Si, and also refine α-Al and eutectic Si in Al⁻7Si. When 2%Mg⁻30%Ce is added, the refining effect of the aluminum⁻silicon alloy is most obvious. After refinement, the hardness and tensile properties of the Al⁻7Si alloy improve. When 2%Mg⁻30%Ce is added to the refiner, the tensile properties of the Al⁻Si alloy are the best. Dynamic mechanical tests were conducted on refined Al⁻7Si alloy. The impact toughness of Al⁻7Si⁻(Al⁻5Ti-2(Mg⁻30%Ce) improved and the impact toughness reached 34.91 J/cm2, which is 78.7% higher than that of Al⁻7Si⁻(Al⁻5Ti) specimens. The separate Hopkinson pressure bar test results show that, under a high strain rate, the strain rate sensitivity of the prepared Al⁻Si alloy is significant. The specimens of Al⁻7Si⁻(Al⁻5Ti-2(Mg⁻30%Ce) demonstrated the best anti-impact performance at the same velocity.

A high-order finite difference method was used to simulate the hypersonic flow field over a blunt cone with different height roughness elements. The unsteady flow field induced by pulse disturbances was analyzed and compared with that under continuous disturbances. The temporal and spatial evolution characteristics of disturbances in the boundary layer were investigated and the propagation of different disturbance modes in the boundary layer was researched through the fast Fourier transform (FFT) method. The effect of the roughness element on the receptivity characteristic of the hypersonic boundary layer under pulse entropy disturbances was explored. The results showed that the different mode disturbances near roughness in the boundary layer were enlarged in the upstream half of the roughness element and suppressed in the downstream half. However, the effect of roughness weakened gradually as the disturbance frequency increased in the boundary layer. A phenomenon of mode competition in the downstream region of the roughness element exited. As the disturbances propagated downstream, the fundamental mode gradually became the dominant mode. A certain promotion effect on the mode competition was induced by the roughness element and the effect was enhanced with the increase in the roughness element height.

Trans-l,4-polyisoprene (TPI) shape memory polymer composites with different chopped carbon fiber mass fractions were prepared to study the effects of different chopped carbon fiber mass fractions and temperatures on the TPI shape memory polymer composites in this paper. While guaranteeing the shape memory effect of TPI shape memory polymers, the carbon fiber fillers also significantly enhanced the mechanical properties of the polymers. The thermodynamic properties and shape memory properties of TPI shape memory polymers were studied by a differential scanning calorimeter (DSC) test, dynamic mechanical analysis (DMA) test, thermal conductivity test, static tensile test, mechanical cycle test, thermodynamic cycling test and shape memory test. Furthermore, the tensile fracture interface of TPI shape memory polymer composites was analyzed by scanning electron microscopy. The experimental results show that when the chopped carbon mass fraction fiber is 8%, TPI shape memory polymers have good shape memory properties and the best mechanical properties.