Search

Resilience aids nursing students in dealing with adversities during their nursing education. This study examined the relationship between nursing students’ resilience and relevant variables in the context of clinical education. Methods: A cross-sectional study was conducted to collect data from 319 undergraduate nursing students in Northeast Thailand. The Connor–Davidson Resilience Scale, the Multidimensional Scale of Perceived Social Support, the Learning Experience Scale or the Personal Responsibility Orientation to Self-Direction in Learning Scale, and the Stressors in Nursing Students scale were administered. A multiple regression analysis was performed for factors presumed to be associated with resilience. Results reported that Thai nursing students’ average resilience score was 71.79 ± 16.33. Multiple regression analysis indicated factors associated with resilience, in which social support (β = 0.354, p < 0.001, 95%CI: 0.240 to 0.469) and self-directed learning (β = 0.787, p < 0.001, 95%CI: 0.606 to 0.968) showed a positive association, while stress (β = −0.083, p = 0.025, 95%CI: −0.083 to −0.006) had a negative association. The final model accounted for 43.4% of the variance in the resilience score. In conclusion, self-directed learning, social support, and perceived stress among nursing students during clinical education are associated with their resilience.

Polymer flooding is one of the enhanced oil recovery (EOR) methods that increase the macroscopic efficiency of the flooding process and enhanced crude oil recovery. In this study, the effect of silica nanoparticles (NP-SiO2) in xanthan gum (XG) solutions was investigated through the analysis of efficiency in core flooding tests. First, the viscosity profiles of two polymer solutions, XG biopolymer and synthetic hydrolyzed polyacrylamide (HPAM) polymer, were characterized individually through rheological measurements, with and without salt (NaCl). Both polymer solutions were found suitable for oil recovery at limited temperatures and salinities. Then, nanofluids composed of XG and dispersed NP-SiO2 were studied through rheological tests. The addition of nanoparticles was shown to produce a slight effect on the viscosity of the fluids, which was more remarkable over time. Interfacial tension tests were measured in water-mineral oil systems, without finding an effect on the interfacial properties with the addition of polymer or nanoparticles in the aqueous phase. Finally, three core flooding experiments were conducted using sandstone core plugs and mineral oil. The polymers solutions (XG and HPAM) with 3% NaCl recovered 6.6% and 7.5% of the residual oil from the core, respectively. In contrast, the nanofluid formulation recovered about 13% of the residual oil, which was almost double that of the original XG solution. The nanofluid was therefore more effective at boosting oil recovery in the sandstone core.

In this study, two different sample preparation methods to synthesize activated carbon from pine wood were compared. The pine wood activated carbon was prepared by mixing ZnCl2 by physical mixing, i.e., “dry mixing” and impregnation, i.e., “wet mixing” before high temperature carbonization. The influence of these methods on the physicochemical properties of activated carbons was examined. The activated carbon was analyzed using nitrogen sorption (surface area, pore volume and pore size distribution), XPS, density, Raman spectroscopy, and electrochemistry. Physical mixing led to a slightly higher density carbon (1.83 g/cm3) than wet impregnation (1.78 g/cm3). Raman spectroscopy analysis also showed that impregnation led to activated carbon with a much higher degree of defects than physical mixing, i.e., ID/IG = 0.86 and 0.89, respectively. The wet impregnated samples also had better overall textural properties. For example, for samples activated with 1:1 ratio, the total pore volume was 0.664 vs. 0.637 cm3/g and the surface area was 1191 vs. 1263 m2/g for dry and wet mixed samples, respectively. In the electrochemical application, specifically in supercapacitors, impregnated samples showed a much better capacitance at low current densities, i.e., 247 vs. 146 F/g at the current density of 0.1 A/g. However, the physically mixed samples were more stable after 5000 cycles: 97.8% versus 94.4% capacitance retention for the wet impregnated samples.

The aim of this study was to evaluate the efficacy of mepolizumab in patients affected by chronic rhinosinusitis with nasal polyps (CRSwNP) in real-life. A single-center retrospective observational study was conducted on severe CRSwNP patients treated with mepolizumab. Nasal endoscopic polyp score (NPS), visual analogue scale (VAS) symptom score, sinonasal outcome test (SNOT-22), asthma control test (ACT) score, fractional exhaled nitric oxide (FeNO), eosinophils blood cells and prednisone intake were assessed at baseline and after 6 months. A total of 55 patients were included; 49 patients (89%) presented with asthma; aspirin exacerbated respiratory disease (AERD) in 28 patients (51%). A statistically significant decrease in the SNOT-22 score was observed (median difference −63; 95% CI: −68; −58; p < 0.001) with median t0 76 and IQR (61;90) to t6 10 (5;15). A reduction in NPS, median t0 NPS 4; (IQR:4;6), median t6 NPS 1; (IQR:0;1) p < 0.001, was greater in patients with AERD. The median baseline VAS score was 6 (IQR:6;7) and the differences between t0 and t6 were statistically significant p < 0.001. Significant changes in blood eosinophils cells, median t0 500 cell/mcl (IQR:340;830), median t6 97 cell/mcl (IQR:60;160) p < 0.001, were greater in patients with AERD. Mepolizumab treatment effects have been demonstrated with significantly reduced symptoms, polyp scores, blood eosinophils and systemic corticosteroid use, resulting in an increased health-related quality of life in patients with severe CRSwNP, regardless of the presence or absence of asthma or AERD.

Silicon nanophotonics has become a versatile platform for optics and optoelectronics. For example, strong light localization at the nanoscale and lack of parasitic losses in infrared and visible spectral ranges make resonant silicon nanoparticles a prospect for improvement in such rapidly developing fields as photovoltaics. Here, we employed optically resonant silicon nanoparticles produced by laser ablation for boosting the power conversion efficiency of organic solar cells. Namely, we created colloidal solutions of spherical nanoparticles with a range of diameters (80–240 nm) in different solvents. We tested how the nanoparticles’ position in the device, their concentration, silicon doping, and method of deposition affected the final device efficiency. The best conditions optimization resulted in an efficiency improvement from 6% up to 7.5%, which correlated with numerical simulations of nanoparticles’ optical properties. The developed low-cost approach paves the way toward highly efficient and stable solution-processable solar cells.

There is a growing body of research that recognizes the potentials of biochar application in agricultural production systems. However, little is known about the effects of biochar, especially hydrochar, on production of containerized seedlings under nursery conditions. This study aimed to test the effects of hydrochar application on growth, quality, nutrient and heavy metal contents, and mycorrhizal association of containerized pine seedlings. The hydrochar used in this study was produced through hydrothermal carbonization of paper mill biosludge at 200 °C. Two forms of hydrochar (powder and pellet) were mixed with peat at ratios of 10% and 20% (v/v) under three levels of applied commercial fertilizer (nil, half and full rates). Application of hydrochar had positive or neutral effects on shoot biomass and stem diameter compared with control seedlings (without hydrochar) under tested fertilizer levels. Analysis of the natural logarithmic response ratios (LnRR) of quality index and nutrient and heavy metal uptake revealed that application of 20% (v/v) hydrochar powder or pellet with 50% fertilizer resulted in same quality pine seedlings with similar heavy metal (Cu, Ni, Pb, Zn and Cr) and nutrient (P, K, Ca and Mg) contents as untreated seedlings supplied with 100% fertilizer. Colonization percentage by ectomycorrhizae significantly increased when either forms of hydrochar were applied at a rate of 20% under unfertilized condition. The results of this study implied that application of proper rates of hydrochar from biosludge with adjusted levels of liquid fertilizer may reduce fertilizer requirements in pine nurseries.

The instantaneous frequency (IF) of a non-stationary signal is usually estimated from a time-frequency distribution (TFD). The IF of heart rate variability (HRV) is an important parameter because the power in a frequency band around the IF can be used for the interpretation and analysis of the respiratory rate but also for a more accurate analysis of heart rate (HR) signals. In this study, we compare the performance of five states of the art kernel-based time-frequency distributions (TFDs) in terms of their ability to accurately estimate the IF of HR signals. The selected TFDs include three widely used fixed kernel methods: the modified B distribution, the S-method and the spectrogram; and two adaptive kernel methods: the adaptive optimal kernel TFD and the recently developed adaptive directional TFD. The IF of the respiratory signal, which is usually easier to estimate as the respiratory signal is a mono-component with small amplitude variations with time, is used as a reference to examine the accuracy of the HRV IF estimates. Experimental results indicate that the most reliable estimates are obtained using the adaptive directional TFD in comparison to other commonly used methods such as the adaptive optimal kernel TFD and the modified B distribution.