Search

Structural variations in the duck genome significantly impact the environmental adaptability and phenotypic diversity of duck populations. Characterizing these SVs in local domestic duck breeds from Shandong province offers valuable insights for breed selection and the development of new breeds. This study aimed to profile the genomic SVs in three local duck breeds (Matahu duck, Weishan partridge duck, and Wendeng black duck) and explore their differential distributions. A total of 21,673 SVs were detected using LUMPY (v0.2.13) and DELLY (v1.0.3) software, with 46% located in intergenic regions, 33% in intronic regions, and frameshift deletions being the most prevalent in exonic regions (3%). SVs distribution showed a decreasing trend with shorter chromosome lengths. Population structure analysis revealed distinct genetic profiles, with Matahu and Weishan partridge ducks showing closer affinities and the Wendeng black duck having a more homogeneous genetic background, likely due to geographic isolation. Functional annotation identified genes related to nervous system development, mitosis, spindle assembly, and energy metabolism. Notable genes included PLXNA4, NRP2, SEMA3A, PTEN, MYBL2, ADK, and COX4I1. Additionally, genes such as PRKG1, GABRA2, and FSHR were linked to energy metabolism and reproductive activity. The study provides a comprehensive analysis of SVs, revealing significant genetic differentiation and identifying genes associated with economically important traits, offering valuable resources for the genetic improvement and breeding of local duck breeds.

Plumage color is a key trait for identifying waterfowl breeds with significant economic importance. A white-feathered group has recently emerged within the native Matahu duck population, presenting an opportunity for breeding new lines. However, the genetic basis for this plumage variation is still unknown, necessitating further research. This study aims to identify the genetic mechanisms underlying the emergence of white-feathered individuals in the Matahu duck population through combined genome and transcriptome analysis, providing insights for selective breeding and the development of new white-feathered lines. In this study, a total of 1344 selected genes and 1406 significantly differentially expressed genes were identified through selection signal analysis and transcriptomic analysis, respectively. The functional enrichment of these genes revealed several key signaling pathways, including those related to cGMP-PKG, cAMP, PI3K-Akt, and MAPK. Furthermore, important candidate genes involved in melanin biosynthesis, such as MITF, MC1R, TYR, TYRP1, and ABCB6, were identified. Notably, 107 genes were detected by both methods, and, among these, DGKI, GPRC5B, HMX1, STS, ADGRA1, PRKAR2B, and HOXB9 are suggested to play a role in melanin formation and potentially influence plumage traits. Through the integrative approach combining genomic selection signals and transcriptomic analyses, we identified several candidate genes directly associated with plumage color, including MITF, TYR, TYRP1, and MC1R, along with multiple signaling pathways linked to melanin formation. We hypothesize that the expression of DGKI, GPRC5B, HMX1, STS, ADGRA1, PRKAR2B, and HOXB9, detected by both methods, may be closely related to the regulation of plumage color traits. These findings provide a foundational basis for further research aimed at elucidating the genetic mechanisms governing plumage color variation in ducks.

Mangrove afforestation is considered an important measure in the “natural-based solution” for mitigating climate warming through sequestering massive carbon (C) into vegetation biomass, yet how the planted mangrove species facilitate soil C sequestration remains unclear. Here, we investigated the stock, source, and fraction of soil organic carbon (SOC) over 1 m depth after 20-year afforestation of five mangrove pure plantations (Acrostichum aureum, Acanthus ilicifolius, Aegiceras corniculatum, Kandelia obovate, and Excoecaria agallocha) on Qi’ao Island, South China. The results showed that SOC stocks did not significantly differ among the five plantations, with an average value of 16.7 kg C m−2. Based on the two-end-member mixing model with plant–soil C stable isotope signatures, the autochthonous (mangrove-derived) C source accounted for 20.2–34.1% of SOC but varied significantly among the plantations. The SOC stock in particulate fraction (1.2–2.0 g C kg−1) and mineral-associated fraction (14.3–16.0 g C kg−1) also significantly differed among the plantations. The similar SOC stock but different source contributions and C fractions among the plantations observed here may have important implications for mangrove afforestation to optimize stand structure and maximize C sequestration.

Volatile organic compounds (VOCs) emitted from building and vehicle cabin materials seriously affect indoor and in-cabin air quality, as well as human health. Previous studies revealed that some VOCs from building materials could react with ozone to affect the concentration levels of the indoor environment, but seldom refers to vehicle cabin materials. In this study, we performed experimental investigation for two kinds of vehicle cabin materials (car carpet, sealing strip) and one furniture material (medium-density fiberboard) by conducting small-scale chamber tests under two different conditions, with ozone (about 110 μg/m3) and without ozone (about 10 μg/m3), to explore the effect of in-cabin chemistry on VOC emissions. We observed the VOC concentration changes in the two scenarios and found that ozone had a significant impact on the concentrations of aldehydes and ketones while having little impact on the concentrations of benzene series. We introduced a gain ratio to quantitatively reflect the concentration changes in the presence of ozone. The gain ratio for aldehydes and ketones is greater than one, while that for the benzene series is basically around one with a small fluctuation range. This study demonstrates that ozone can react with VOCs containing unsaturated carbon–carbon bonds or carbon–oxygen bonds emitted from varied materials to produce aldehydes and ketones, which will further reduce indoor and in-cabin air quality.

The low-strain integrity testing of large-diameter piles has attracted more and more attention because of its wide application in offshore engineering, such as for wind turbines, etc. Body and Rayleigh waves generate on the top surface of large-diameter piles after the excitation load. The multi-reflections of these waves from the pile side result in the obvious three-dimensional effect at the pile top. Therefore, one-dimensional wave theory is no longer suitable for interpreting the wave propagation in the pile body under vertical excitation. In this paper, based on the “pile in pile” conception, both the pile and soil were simulated using a three-dimensional continuum model, considering the vertical displacement, to investigate the influence of the three-dimensional effect of the pile-soil system on the vertical dynamic response of large-diameter piles in low-strain integrity testing. The axisymmetric solution to the three-dimensional pile-soil system was obtained, and the rationality of the proposed solution was verified by comparing it with the results of the finite element method and the results of other existing solutions. Arithmetic examples were used to describe the influence of the three-dimensional effect of the pile-soil system on the vertical dynamic response of large-diameter piles.

To improve the stability of the bridge structure, we detect bolts in the bridge which cause the symmetry failure of the bridge center. For data acquisition, bolts are small-scale objects under complex background in images, and their feature expression ability is limited. Due to those questions, we propose a new bolt positioning detection based on improved YOLOv5 for bridge structural health monitoring. This paper makes three major contributions. Firstly, according to the calibration anchor boxes of bolts, the size and proportion parameters of the initial anchor boxes are optimized by K-means++ clustering algorithm to solve the initial clustering problem of anchor boxes in object detection. Second, the hypercolumn (HC) technique fuses the low-level global features of the trunk and the high-level local features of three different scales to solve the problem of the inefficient distribution of anchors and insufficient extraction of classification features. In this way, we improve the detection accuracy and speed of bolt detection. Finally, we establish a dataset of bridge bolts through network collection and public datasets, including 1494 images. We compare and verify the new method in the collected bolt dataset. The experimental results show that the precision (P) of the improved YOLOv5x is up to 87.3%, and the average precision (AP) is up to 86.3%, which are 6.5% and 5.9% higher than the original YOLOv5x, respectively.

Due to its particularity and importance, long-distance oil and gas pipelines need to be well protected from damage by backfill materials. In this study, construction waste and expanded polystyrene (EPS) were used to replace conventional fine aggregate, and ethylene vinyl acetate-resin (EVA) was used to modify the surface of EPS to prepare lightweight controlled low strength materials (CLSM). Lightweight CLSM was tested in mechanics and physics and its microstructure was studied using microscopic analysis methods. The results revealed that the surface modification of EPS by EVA could greatly improve the compatibility of EPS with inorganic cementitious materials and prepare CLSM with a fluidity greater than 200 mm. EPS and cement content in cementitious materials play an important role in the development of material strength. When the volume ratio of EPS to construction waste was 2, and the content of cement in the cementitious materials was 35%, CLSM’s unconfined compressive strength at 28 days was only 0.48 MPa. In order to obtain the lightweight CLSM that meets the mechanical properties, the EPS content should not be too large. It can be concluded from the microscopic analysis that the increase of EPS content will lead to poor pore uniformity of the specimen, forming a loose mesh structure of defects, which is not conducive to the development of strength. In this study, EPS and construction waste are used to provide a green idea for preparing lightweight controlled low strength materials, which provides a reference for the backfill protection of the material in oil and gas pipelines in the future.

The human retina, which is part of the central nervous system, has exceptionally high energy demands that requires an efficient metabolism of glucose, lipids, and amino acids. Dysregulation of retinal metabolism disrupts local energy supply and redox balance, contributing to the pathogenesis of diverse retinal diseases, including age-related macular degeneration, diabetic retinopathy, inherited retinal degenerations, and Macular Telangiectasia. A better understanding of the contribution of dysregulated metabolism to retinal diseases may provide better therapeutic targets than we currently have.

Plant leaf nutrient concentrations and resorption are sensitive to fertilization, yet their co-responses under different nutrient-limited conditions have not been well studied. We conducted a meta-analysis from a global dataset of 43 reports, including 130 observations of studies with plant leaf nitrogen (N) or phosphorus (P) concentrations and nitrogen resorption efficiency (NRE) or phosphorus resorption efficiency (PRE), in response to fertilization under different nutrient-limited conditions divided by the thresholds of leaf N:P ratio values of 10 and 20. The results showed that N fertilization generally increased leaf N concentration and decreased NRE, with greater magnitudes under N-limited conditions. P fertilization also generally increased leaf P concentration and decreased PRE, with greater magnitudes under P-limited conditions. N fertilization decreased leaf P concentration and increased PRE only under the N-limited condition. Under the P-limited or N and P co-limited conditions, however, N fertilization increased leaf P concentration and did not change PRE. Moreover, P fertilization did not change leaf N concentration under all nutrient-limited conditions but significantly increased NRE under the N-limited or N and P co-limited conditions. These findings suggest that plants cope with fertilization-induced N limitation vs. P limitation at the leaf level with different nutrient-use strategies.

Large-energy mode-locked fiber lasers are extensively studied due to their indispensable use in various fields and applications. Recently, ferromagnetic insulators have attracted tremendous research interest in ultra-fast photonics because of their unique ferromagnetic properties and typical layered structure. In our work, Cr2Si2Te6 nanosheets are prepared and utilized as a saturable absorber (SA) in a large-energy mode-locked erbium-doped fiber (EDF) laser. With a total cavity length of 240 m, a stable mode-locked operation characterized by maximum pulse energy as high as 244.76 nJ with a repetition rate of 847.64 kHz is achieved. When the cavity length is extended to 390 m, the output maximum pulse energy is successfully scaled up to 325.50 nJ. To our knowledge, this is the largest pulse energy and highest output power level to be achieved in mode-locked fiber lasers by two-dimensional (2D) material saturable absorbers (SAs) so far. This work not only makes a forward step to the investigation of the generation of large-energy pulses in mode-locked fiber lasers but also fully proves that the ferromagnetic insulator-Cr2Si2Te6 possesses an excellent nonlinear absorption property, antioxidant capacity in ambient conditions, as well as outstanding thermal stability, which enriches our insight into 2D materials.

Biochar addition is a promising solution to improve soil nitrogen (N) availability and enhance crop productivity. However, a comprehensive understanding of the impact of soil N dynamics on crop productivity under biochar addition remains elusive. Here, we conducted a meta-analysis from 93 peer-reviewed field experiments to synthesize the linkage of crop productivity to soil N dynamics under biochar addition. The results show that biochar addition significantly enhanced crop productivity by 12.8% and plant N uptake (PNU) by 22.6%, and there was a strongly positive relationship between crop productivity and PNU. Biochar addition also significantly increased the contents of soil total N (TN), inorganic N (IN), microbial biomass N (MBN), and biological N2 fixation (BNF) by 3.34–18.7%, but reduced nitrous oxide (N2O) emission by 15.9%. Further analysis with the aggregated boosted tree model indicated that the TN and BNF played the most important roles in biochar-induced change in crop productivity. However, while crop productivity was positively correlated with TN under biochar addition, it showed a negative correlation with BNF. These findings suggest that biochar addition could enhance crop growth and productivity through increasing the soil N resource and N uptake, but this was not true for some N2-fixing crops, probably because they were usually constrained by nutrients other than N.

Retinal vein occlusion (RVO) is a differential diagnosis for Coats’ disease due to retinal arterial Leber’s aneurysms. Occasionally, RVO shows a Coats-like appearance. The differential diagnosis between Coats’ disease and RVO is essential for clinical therapy, especially for those obsolete RVOs with collateral vessels and without retinal hemorrhage. In this case report, we describe and discuss the imaging characteristics of bilateral RVO-simulated Coats’ disease with tortuous retinal arterioles and its prognosis after anti-vascular endothelial growth factor therapy, which will be beneficial for its definite diagnosis and aid further investigation.

For large-scale selective laser melting (SLM) additive manufacturing technology, three main problems severely restrict its development and application, namely the residual stress, defects, and columnar grains with anisotropy. To overcome these problems, a new method is proposed by combining SLM with ultrasonic impact treatment (UIT) technique. This study explores the feasibility of UIT assisted SLM, as well as the effect of UIT on the residual stress, defects and β grains of Ti-6Al-4V alloy sample. The results indicate that after the application of UIT during SLM, residual stress can be largely reduced and defects can be hammered flat and even eliminated. Meanwhile, the epitaxial growth of columnar grains is prevented, and fine equiaxed grains are formed due to plastic deformation and recrystallization.