Search

Developing high-performance and low-cost protein purification materials is of great importance to meet the demands for highly purified proteins in biotechnological industries. Herein, a facile strategy was developed to design and construct high-efficiency protein absorption and separation media by combining aerogels’ molding techniques and impregnation processes. Poly (ethylene-co-vinyl alcohol) (EVOH) nanofibrous aerogels (NFAs) were modified by grafting butane tetracarboxylic acid (BTCA) over them in situ. This modification was carried out using polyphosphoric acid as a catalyst. The resulting EVOH/BTCA NFAs exhibited favorable comprehensive properties. Benefiting from the highly interconnected porous structure, good underwater compressive properties, and abundant absorption ligands, the obtained EVOH/BTCA NFAs possessed a high static absorption capacity of 1082.13 mg/g to lysozyme and a short absorption equilibrium time of about 6 h. A high saturated dynamic absorption capacity for lysozyme (716.85 mg/g) was also realized solely by gravity. Furthermore, EVOH/BTCA NFAs displayed excellent reusability, good acid and alkaline resistance, and unique absorption selectivity performance. The successful synthesis of such aerogels can provide a potential candidate for next-generation protein absorbents for bio-separation and purification engineering.

Transthyretin amyloid cardiomyopathy (ATTR-CM) is a complex and serious form of heart failure caused by the accumulation of transthyretin amyloid protein in the heart muscle. Variable symptoms of ATTR-CM can lead to a delayed diagnosis. Recognizing the diagnostic indicators is crucial to promptly detect this condition. A targeted literature review was conducted to examine the latest international consensus recommendations on a comprehensive diagnosis of ATTR-CM. Additionally, a panel consisting of nuclear medicine expert consultants (n = 10) and nuclear imaging technicians (n = 2) convened virtually from the Kingdom of Saudi Arabia (KSA) to formulate best practices for ATTR-CM diagnosis. The panel reached a consensus on a standard diagnostic pathway for ATTR-CM, which commences by evaluating the presence of clinical red flags and initiating a cardiac workup to assess the patient’s echocardiogram. Cardiac magnetic resonance imaging may be needed, in uncertain cases. When there is a high suspicion of ATTR-CM, patients undergo nuclear scintigraphy and hematologic tests to rule out primary or light-chain amyloidosis. The expert panel emphasized that implementing best practices will support healthcare professionals in KSA to improve their ability to detect and diagnose ATTR-CM more accurately and promptly. Diagnosing ATTR-CM accurately and early can reduce morbidity and mortality rates through appropriate treatment.

In this study, white-rot fungus, Rigidoporus vinctus, collected from an unidentified fallen twig from Pathankot, Punjab, India, was used for biosorption of anionic Congo red and cationic Methylene blue dyes from an aqueous medium. The biosorption efficiency of the live biomass of Rigidoporus vinctus was investigated to optimize biosorbent dosage, process time, concentrations of dyes, and pH of solutions. The results indicated that Rigidoporus vinctus is more efficient than other reported bio-adsorbents for Congo red and Methylene blue dyes. The maximum biosorption activity of Rigidoporus vinctus for Congo red was found at pH 2, and that for Methylene blue was at pH 10, after 24 h of the reaction period. The process followed pseudo-second-order kinetics, which indicated that the interaction of both dyes to the adsorption sites on the surface of Rigidoporus vinctus was responsive to biosorption. The biosorption process could be well explained by the Langmuir isotherm for both dyes. The maximum monolayer biosorption capacity of Rigidoporus vinctus for Congo red and Methylene blue was observed to be 54.0 mg/g and 80.6 mg/g, respectively. The seed germination test was carried out, and it was assessed that the toxicity of dyes was reduced up to significant levels. Based on the present experimental findings, it can be concluded that biosorption using the live biomass of Rigidoporus vinctus can effectively decolorize dye-containing wastewater, thus reducing the hazardous effects of dyes on human beings.

Long-term corrosion protection of metals might be provided by nanocomposite coatings having synergistic qualities. In this perspective, rapeseed oil-based polyurethane (ROPU) and nanocomposites with calcium and magnesium ions were designed. The structure of these nanocomposites was established through Fourier-transform infrared spectroscopy (FT-IR). The morphological studies were carried out using scanning electron microscopy (SEM) as well as transmission electron microscopy (TEM). Their thermal characteristics were studied using thermogravimetric analysis (TGA). Electrochemical experiments were applied for the assessment of the corrosion inhibition performance of these coatings in 3.5 wt. % NaCl solution for 7 days. After completion of the test, the results revealed a very low icorr value of 7.73 × 10−10 A cm−2, a low corrosion rate of 8.342 × 10−5 mpy, impedance 1.0 × 107 Ω cm2, and phase angle (approx 90°). These findings demonstrated that nanocomposite coatings outperformed ordinary ROPU and other published methods in terms of anticorrosive activity. The excellent anti-corrosive characteristic of the suggested nanocomposite coatings opens up new possibilities for the creation of advanced high-performance coatings for a variety of metal industries.

Biotic and abiotic stresses, such as drought, salinity, extreme temperatures (cold and heat) and oxidative stress, are often interrelated; these conditions singularly or in combination induce cellular damage [...]

These days, many countries have a water shortage and have limited access to clean water. To overcome this, a new treatment is emerging, namely, the photocatalytic processing of greywater. Photocatalytic processes to remove the organic matter from different greywater sources are critically reviewed. Their efficiency in degrading the organic matter in greywater is scrutinized along with factors that can affect the activity of photocatalysts. Modified TiO2, ZnO and TiO2 catalysts show great potential in degrading organic materials that are present in greywater. There are several methods that can be used to modify TiO2 by using sol-gel, microwave and ultrasonication. Overall, the photocatalytic approach alone is not efficient in mineralizing the organic compounds, but it works well when the photocatalysis is combined with oxidants and Fe3+. However, factors such as pH, concentration and catalyst-loading of organic compounds can significantly affect photocatalytic efficiency.

Genus Ziziphus (Z.) contains various important species in tropical and subtropical regions that are globally famous for their food and medicinal uses. However, no comprehensive study was available on the morphology and phytochemistry of Ziziphus species, mainly under different growth conditions, i.e., irrigated and desert (Cholistan). Therefore, this study was carried out to evaluate the morphological and phytochemical characteristics of Ziziphus species, i.e., Z. jujuba, Z. mauritiana, Z. spina-christi, and Z. nummularia, found in the irrigated and desert conditions. Our results revealed significant variations for most of the measured parameters, showing a large-scale diversity among Ziziphus species under irrigated and desert conditions. Specifically, Ziziphus species showed better morphology of all measured parameters of leaves and fruits under irrigated conditions compared to desert conditions, indicating that the optimum water availability in irrigated conditions improved the morphological parameters of Z. species. Meanwhile, among all Ziziphus species, the maximum leaf length (7.4 cm), leaf width (4.1 cm), leaf area (30.6 cm2), and leaf petiole length (1.3 cm) were observed for Z. jujuba, and the highest leaf dry weight (55.4%) was recorded for Z. mauritiana. Similarly, the highest fruit length (3.9 cm), fruit stalk length (1.5 cm), fruit diameter (3.6 cm), fruit width (3.8 cm), fruit area (66.1 cm2), seed length (2 cm), and seed diameter (1.1 cm) were measured for species Z. jujuba, while the maximum fruit dry weight (49.9%) and seed width (1.4 cm) were recorded for species Z. nummularia. Interestingly, compared to irrigated conditions, higher values of bioactive contents, i.e., phenol, flavonoid, and antioxidant activity, in fruits and leaves of Ziziphus species under desert conditions indicated the positive impact of desert climate on the phytochemistry of the Z. plants. Among Ziziphus species, Z. nummularia accumulated the maximum fruit phenols (304.4 mg GAE/100 g), leaf phenols (314.2 mg GAE/100 g), fruit flavonoids (123.7 mg QE/100 g), and leaf flavonoids (113.4 mg QE/100 g). Overall, this study demonstrated the significant morphological and phytochemical variations of the Ziziphus species under irrigated and desert conditions, which could be utilized for future studies to improve the production and medicinal potential of the Ziziphus, especially in desert areas.

Toluene has been shown to be highly toxic to humans and animals and can cause damage to various tissues. However, studies reporting its effects on ovarian function are still limited. In this study, we investigated the in vivo effect of toluene using female Wistar rats. We found that toluene exposure decreased ovarian weight and affected ovarian structure by increasing the number of abnormally growing follicles. Moreover, it significantly increased progesterone and testosterone levels. We also showed that toluene exposure decreased GDF-9 protein and its encoding gene. In addition, it inhibited the expression of most of the genes involved in granulosa cell proliferation and differentiation, such as Insl3, ccnd2 and actb. The TUNEL assay showed that apoptosis occurred at the middle and high doses only (4000 and 8000 ppm, respectively), whereas no effect was observed at the low dose (2000 ppm). Interestingly, we showed that toluene exposure induced autophagy as LC3 protein and its encoding gene significantly increased for all doses of treatment. These results may suggest that the activation of autophagy at a low dose of exposure was to protect ovarian cells against death by inhibiting apoptosis, whereas its activation at high doses of exposure triggered apoptosis leading to cell death.

Lowland rice is an important cereal crop that plays a key role in the food security and the economy of Thailand. Terminal water stress (TWS) in rainfed lowland areas poses threats to rice productivity due to stress occurrence at terminal crop stages and extreme sensitivity of rice to TWS. A two-year study was conducted to characterize the performance of yield and yield attributes of twelve Thai lowland rice genotypes under TWS, to identify stress-tolerant genotypes using stress response indices and to identify promising stress indices which are correlated with grain yield (GY) under well-watered (WW) and TWS conditions for their use as rapid identifiers in a rice crop breeding program for enhancing drought stress tolerance. Measurements were recorded under WW and TWS conditions. Highly significant variations were observed amongst assessed genotypes for their yield productivity responses. According to stress response indices, genotypes were categorized into stress-tolerant and stress susceptible genotypes. Genotypes Hom Pathum, Sang Yod, Dum Ja and Pathum Thani-1 were found highly stress tolerant and relatively high yielding; genotypes Look Pla and Lep Nok were stress tolerant, whereas genotypes Chor Lung, Hom Nang Kaew and Hom Chan were moderately tolerant genotypes. Hence, stress-tolerant genotypes could be potentially used for cultivation under rainfed and water-limited conditions, where TWS is predicted particularly in southern Thailand to stabilize rice productivity. Stress tolerance indices, including stress tolerance index (STI), geometric mean productivity (GMP), mean productivity index (MPRO) and harmonic mean index (MHAR), indicated strong and positive associations with GY under WW and TWS; thus, these indices could be used to indicate stress tolerance in rice crop breeding program aimed at a rapid screening of lowland rice genotypes for stress tolerance.

The frequency of heavy rains is increasing with climate change in regions that already have high annual rainfall (i.e., Sichuan, China). Crop response under such high-rainfall conditions is to increase dry matter investment in vegetative parts rather than reproductive parts. In the case of soybean, leaf redundancy prevails, which reduces the light transmittance and seed yield. However, moderate defoliation of soybean canopy could reduce leaf redundancy and improve soybean yield, especially under high-rainfall conditions. Therefore, the effects of three defoliation treatments (T1, 15%; T2, 30%; and T3, 45% defoliation from the top of the soybean canopy; defoliation treatments were applied at the pod initiation stage of soybean) on the growth and yield parameters of soybean were evaluated through field experiments in the summer of 2017, 2018, and 2019. All results were compared with nondefoliated soybean plants (CK) under high-rainfall conditions. Compared with CK, treatment T1 significantly (p < 0. 05) improved the light transmittance and photosynthetic rate of soybean. Consequently, the leaf greenness was enhanced by 22%, which delayed the leaf senescence by 13% at physiological maturity. Besides, compared to CK, soybean plants achieved the highest values of crop growth rate in T1, which increased the total dry matter accumulation (by 6%) and its translocation to vegetative parts (by 4%) and reproductive parts (by 8%) at physiological maturity. This improved soybean growth and dry matter partitioning to reproductive parts in T1 enhanced the pod number (by 23%, from 823.8 m−2 in CK to 1012.7 m−2 in T1) and seed number (by 11%, from 1181.4 m−2 in CK to 1311.7 m−2 in T1), whereas the heavy defoliation treatments considerably decreased all measured growth and yield parameters. On average, treatment T1 increased soybean seed yield by 9% (from 2120.2 kg ha−1 in CK to 2318.2 kg ha−1 in T1), while T2 and T3 decreased soybean seed yield by 19% and 33%, respectively, compared to CK. Overall, these findings indicate that the optimum defoliation, i.e., T1 (15% defoliation), can decrease leaf redundancy and increase seed yield by reducing the adverse effects of mutual shading and increasing the dry matter translocation to reproductive parts than vegetative parts in soybean, especially under high-rainfall conditions. Future studies are needed to understand the internal signaling and the molecular mechanism controlling and regulating dry matter production and partitioning in soybean, especially from the pod initiation stage to the physiological maturity stage.

Wheat crop experiences high temperature stress during flowering and grain-filling stages, which is termed as “terminal heat stress”. Characterizing genotypes for adaptive traits could increase their selection for better performance under terminal heat stress. The present study evaluated the morpho-physiological traits of two spring wheat cultivars (Millet-11, Punjab-11) and two advanced lines (V-07096, V-10110) exposed to terminal heat stress under late sowing. Early maturing Millet-11 was used as heat-tolerant control. Late sowing reduced spike length (13%), number of grains per spike (10%), 1000-grain weight (13%) and biological yield (15–20%) compared to timely sowing. Nonetheless, higher number of productive tillers per plant (19–20%) and grain yield (9%) were recorded under late sowing. Advanced lines and genotype Punjab-11 had delayed maturity and better agronomic performance than early maturing heat-tolerant Millet-11. Advanced lines expressed reduced canopy temperature during grain filling and high leaf chlorophyll a (20%) and b (71–125%) contents during anthesis under late sowing. All wheat genotypes expressed improved stem water-soluble carbohydrates under terminal heat stress that were highest for heat-tolerant Millet-11 genotype during anthesis. Improved grain yield was associated with the highest chlorophyll contents showing stay green characteristics with maintenance of high photosynthetic rates and cooler canopies under late sowing. The results revealed that advanced lines and Punjab-11 with heat adaptive traits could be promising source for further use in the selection of heat-tolerant wheat genotypes.

Phenology algorithms in crop growth models have inevitable systematic errors and uncertainties. In this study, the phenology simulation algorithms in APSIM classical (APSIM 7.9) and APSIM next generation (APSIM-NG) were compared for spring barley models at high latitudes. Phenological data of twelve spring barley varieties were used for the 2014–2018 cropping seasons from northern Sweden and Finland. A factorial-based calibration approach provided within APSIM-NG was performed to calibrate both models. The models have different mechanisms to simulate days to anthesis. The calibration was performed separately for days to anthesis and physiological maturity, and evaluations for the calibrations were done with independent datasets. The calibration performance for both growth stages of APSIM-NG was better compared to APSIM 7.9. However, in the evaluation, APSIM-NG showed an inclination to overestimate days to physiological maturity. The differences between the models are possibly due to slower thermal time accumulation mechanism, with higher cardinal temperatures in APSIM-NG. For a robust phenology prediction at high latitudes with APSIM-NG, more research on the conception of thermal time computation and implementation is suggested.

Year to year change in weather poses serious threats to agriculture globally, especially in developing countries. Global climate models simulate an increase in global temperature between 2.9 to 5.5 °C till 2060, and crop production is highly vulnerable to climate warming trends. Extreme temperature causes a significant reduction in crop yields by negatively regulating the crop phenology. Therefore, to evaluate warming impact on cotton (Gossypium hirsutum L.) production and management practices, we quantified agrometeorological data of 30 years by applying multiple crop modelling tools to compute the expected rise in temperature, impact of crop phenology, yield loss, provision of agrometeorology-services, agronomic technologies, and adaptation to climate-smart agriculture. Model projections of 15 agrometeorology stations showed that the growing duration of the sowing-boll opening and sowing-harvesting stages was reduced by 2.30 to 5.66 days decade−1 and 4.23 days decade−1, respectively, in Pakistan. Temperature rise in China also advanced the planting dates, sowing emergence, 3–5 leaves, budding anthesis, full-bloom, cleft-boll, boll-opening, and boll-opening filling by 24.4, 26.2, 24.8, 23.3, 22.6, 15.8, 14.6, 5.4, 2.9, and 8.0 days. Furthermore, present findings exhibited that the warming effect of sowing-harvest time was observed 2.16 days premature, and delayed for 8.2, 2.4, and 5.3 days in the 1970s, 1980s, and 1990s in China. APSIM-cotton quantification revealed that the sowing, emergence, flowering, and maturity stages were negatively correlated with temperature −2.03, −1.93, −1.09, and −0.42 days °C−1 on average, respectively. This study also provided insight into the adaptation of smart and better cotton by improving agrotechnological services.

Quinoa (Chenopodium quinoa Willd.) is a halophytic crop that shows resistance to multiple abiotic stresses, including salinity. In this study we investigated the salinity tolerance mechanisms of six contrasting quinoa cultivars belonging to the coastal region of Chile using agro-physiological parameters (plant height (PH), number of branches/plant (BN), number of panicles/plant (PN), panicle length (PL), biochemical traits (leaf C%, leaf N%, grain protein contents); harvest index and yield (seed yield and plant dry biomass (PDM) under three salinity levels (0, 10, and 20 d Sm−1 NaCl). The yield stability was evaluated through comparision of seed yield characteristics [(static environmental variance (S2) and dynamic Wricke’s ecovalence (W2)]. Results showed that significant variations existed in agro-morphological and yield attributes. With increasing salinity levels, yield contributing parameters (number of panicles and panicle length) decreased. Salt stress reduced the leaf carbon and nitrogen contents. Genotypes Q21, and AMES13761 showed higher seed yield (2.30 t ha−1), more productivity and stability at various salinities as compared to the other genotypes. Salinity reduced seed yield to 44.48% and 60% at lower (10 dS m−1) and higher salinity (20 dS m−1), respectively. Grain protein content was highest in NSL106398 and lowest in Q29 when treated with saline water. Seed yield was positively correlated with PH, TB, HI, and C%. Significant and negative correlations were observed between N%, protein contents and seed yield. PH showed significant positive correlation with APL, HI, C% and C:N ratio. HI displayed positive correlations with C%, N% and protein content., All measured plant traits, except for C:N ratio, responded to salt in a genotype-specific way. Our results indicate that the genotypes (Q21 and AMES13761) proved their suitability under sandy desert soils of Dubai, UAE as they exhibited higher seed yield while NSL106398 showed an higher seed protein content. The present research highlights the need to preserve quinoa biodiversity for a better seedling establishment, survival and stable yield in the sandy desertic UAE environment.

Temperature across the globe is increasing continuously at the rate of 0.15–0.17 °C per decade since the industrial revolution. It is influencing agricultural crop productivity. Therefore, thermotolerance strategies are needed to have sustainability in crop yield under higher temperature. However, improving thermotolerance in the crop is a challenging task for crop scientists. Therefore, this review work was conducted with the aim of providing information on the wheat response in three research areas, i.e., physiology, breeding, and advances in genetics, which could assist the researchers in improving thermotolerance. The optimum temperature for wheat growth at the heading, anthesis, and grain filling duration is 16 ± 2.3 °C, 23 ± 1.75 °C, and 26 ± 1.53 °C, respectively. The high temperature adversely influences the crop phenology, growth, and development. The pre-anthesis high temperature retards the pollen viability, seed formation, and embryo development. The post-anthesis high temperature declines the starch granules accumulation, stem reserve carbohydrates, and translocation of photosynthates into grains. A high temperature above 40 °C inhibits the photosynthesis by damaging the photosystem-II, electron transport chain, and photosystem-I. Our review work highlighted that genotypes which can maintain a higher accumulation of proline, glycine betaine, expression of heat shock proteins, stay green and antioxidant enzymes activity viz., catalase, peroxidase, super oxide dismutase, and glutathione reductase can tolerate high temperature efficiently through sustaining cellular physiology. Similarly, the pre-anthesis acclimation with heat treatment, inorganic fertilizer such as nitrogen, potassium nitrate and potassium chloride, mulches with rice husk, early sowing, presoaking of a 6.6 mM solution of thiourea, foliar application of 50 ppm dithiothreitol, 10 mg per kg of silicon at heading and zinc ameliorate the crop against the high temperature. Finally, it has been suggested that modern genomics and omics techniques should be used to develop thermotolerance in wheat.

In South Asia, soil health degradation is affecting the sustainability of the rice-wheat cropping system (RWCS). Indeed, for the sustainability of the soil quality, new adaptive technologies, i.e., conservation tillage and straw management resource conservation, are promising options. This investigation was focused on the interaction of tillage and straw management practices and their effects on Aridisols, Yermosols soil quality, and nutrients dynamics with different soil profiles within RWCS. The long-term field experiment was started in 2014 with the scenarios (i) conventional tillage (SC1), (ii) residue incorporation (SC2), (iii) straw management practices (SC3 and SC4) and conservation tillage (SC5). Conservation tillage practice (SC5) showed significant impact on properties of soil and availability of nutrients in comparison with that of conventional farmers practice (SC1) at the studied soil depths. The SC5 showed significant results of gravitational water contents (25.34%), moderate pH (7.4), soil organic-matter (7.6 g kg−1), total nitrogen (0.38 g kg−1), available phosphate (7.4 mg kg−1), available potassium (208 mg kg−1) compared to SC1 treatment at 0 to 15 cm soil depth. Whereas, DTPA-extractable-Cu, Mn, and Zn concentration were significantly higher, i.e., 1.12 mg kg−1, 2.14 mg kg−1, and 4.35 mg kg−1, respectively under SC5 than conventional farmer’s practices, while DTPA (diethylene triamine pentaacetic acid) extractable Fe (6.15 mg kg−1) was more in straw management practices (SC4) than conventional and conservation tillage. Therefore, conservation tillage (SC5) can surge the sustainability of the region by improving soil assets and nutrients accessibility and has the potential to minimize inorganic fertilizers input in the long run.

Salinity is a major abiotic stress which limits crop production, especially under rainfed conditions. Selenium (Se), as an important micronutrient, plays a vital role in mitigating detrimental effects of different abiotic stresses. The objective of this research was to examine the effect of Se fertilization on black gram (Vigna mungo) under salt stress. Our results showed that salt stress (100 mM NaCl) in leaves significantly induced oxidative damage and caused a decline in relative water content, chlorophyll (Chl), stomatal conductance (gs), photochemical efficiency (Fv/Fm), sucrose, and reducing sugars. A low dose of Se (1.5 ppm) significantly reduced hydrogen peroxide content, malondialdehyde formation, cell membrane damage, and also improved antioxidative enzyme activities, including superoxide dismutase, catalase, ascorbate peroxidase, glutathione reductase, and glutathione peroxidase under salt stress. Se-treated plants exhibited higher Chl, gs, Fv/Fm, sucrose, and reducing sugars than untreated plants in response to salt stress. In addition, Se application enhanced Se uptake and reduced Na+ uptake, but Cl− remained unaffected. Our results indicated that a low dose of Se effectively alleviated salt damage via inhibition of Na+ uptake and enhanced antioxidant defense resulting in a significant decrease in oxidative damage, and maintained gaseous exchange and PS II function for sucrose and reducing sugars accumulation in black gram.

Vitamin D is well known for its role in maintaining calcium and phosphorus homeostasis and in promoting bone mineralization; however, more of its pleiotropic effects have been described recently. The aim of the present investigation was to study the effect of vitamin D treatment on skeletal muscles changes under different dietary conditions using an animal model. Four groups of C57BL/6J mice (n = 11 each) were maintained on either low fat diet (LFD) or high fat diet ‎‎(HFD) with and without 1α,25–dihydroxyvitamin D3 (calcitriol) for 16 weeks. Animal weigh was recorded at baseline and then regular intervals, and at the end of the study, skeletal muscle tissues were harvested for the evaluation of the histopathological and ultrastructural changes. When control C57BL/6J mice were fed high-fat diet for 12 weeks, body weight gain was significantly increased compared with mice fed a LFD. (30.2% vs. 8.4%, p < 0.01). There was a significant gradual decrease in the weight of HFD fed mice that were treated with vitamin D as compared with a steady increase in the weights of controls (6.8% vs. 28.7%, p < 0.01). While the LFD group showed some ultrastructural changes, HDF fed on mice showed great muscle structural abnormalities. The whole sarcosome along with its membrane and cristae were severely damaged with scattered myocytes in HFD group. Furthermore, the mitochondria appeared weak and were on the verge of degenerations. The bands were diminished with loss of connections among myofibrils. These changes were attenuated in the HFD group treated with vitamin D with tissues have regained their normal structural appearance. The current findings indicate an important effect of vitamin D on skeletal muscle histology under HFD conditions.

Resources are limited, thus improving resource use efficiency is a key objective for cereal-based cropping systems. This field study was carried out to quantify resource use efficiencies in selected C3 and C4 cereals under split nitrogen (N) application regimes. The study included the following treatments: six cereals (three C3: wheat, oat, and barley; and three C4: maize, millet, and sorghum) and four split N application regimes (NS1 = full amount of N at sowing; NS2 = half N at sowing + half N at first irrigation; NS3 = ⅓ N at sowing + ⅓ N at first irrigation + ⅓ N at second irrigation; NS4 = ¼ N at sowing + ¼ N at first irrigation + ¼ N at second irrigation + ¼ N at third irrigation). Results revealed that C4 cereals out-yielded C3 cereals in terms of biomass production, grain yield, and resource use efficiencies (i.e., radiation use efficiency (RUE) and nitrogen use efficiency (NUE)), while splitting N into three applications proved to be a better strategy for all of the selected winter and summer cereals. The results suggest that C4 cereals should be added into existing cereal-based cropping systems and N application done in three installments to boost productivity and higher resource use efficiency to ensure food security for the burgeoning population.

Graphene-based materials have garnered significant attention because of their versatile bioapplications and extraordinary properties. Graphene oxide (GO) is an extremely oxidized form of graphene accompanied by the functional groups of oxygen on its surface. GO is an outstanding platform on which to pacify silver nanoparticles (Ag NPs), which gives rise to the graphene oxide-silver nanoparticle (GO-Ag) nanocomposite. In this experimental study, the toxicity of graphene oxide-silver (GO-Ag) nanocomposites was assessed in an in vitro human breast cancer model to optimize the parameters of photodynamic therapy. GO-Ag was prepared using the hydrothermal method, and characterization was done by X-ray diffraction, field-emission scanning electron microscope (FE-SEM), transmission Electron Microscopy (TEM), energy dispersive X-rays Analysis (EDAX), atomic force microscopy and ultraviolet-visible spectroscopy. The experiments were done both with laser exposure, as well as in darkness, to examine the phototoxicity and cytotoxicity of the nanocomposites. The cytotoxicity of the GO-Ag was confirmed via a methyl-thiazole-tetrazolium (MTT) assay and intracellular reactive oxygen species production analysis. The phototoxic effect explored the dose-dependent decrease in the cell viability, as well as provoked cell death via apoptosis. An enormously significant escalation of 1O2 in the samples when exposed to daylight was perceived. Statistical analysis was performed on the experimental results to confirm the worth and clarity of the results, with p-values < 0.05 selected as significant. These outcomes suggest that GO-Ag nanocomposites could serve as potential candidates for targeted breast cancer therapy.