Search

Drought stress significantly restricts the growth, yield, and quality of peppers. Strigolactone (SL), a relatively new plant hormone, has shown promise in alleviating drought-related symptoms in pepper plants. However, there is limited knowledge on how SL affects the gene expression in peppers when exposed to drought stress (DS) after the foliar application of SL. To explore this, we conducted a thorough physiological and transcriptome analysis investigation to uncover the mechanisms through which SL mitigates the effects of DS on pepper seedlings. DS inhibited the growth of pepper seedlings, altered antioxidant enzyme activity, reduced relative water content (RWC), and caused oxidative damage. On the contrary, the application of SL significantly enhanced RWC, promoted root morphology, and increased leaf pigment content. SL also protected pepper seedlings from drought-induced oxidative damage by reducing MDA and H2O2 levels and maintaining POD, CAT, and SOD activity. Moreover, transcriptomic analysis revealed that differentially expressed genes were enriched in ribosomes, ABC transporters, phenylpropanoid biosynthesis, and Auxin/MAPK signaling pathways in DS and DS + SL treatment. Furthermore, the results of qRT-PCR showed the up-regulation of AGR7, ABI5, BRI1, and PDR4 and down-regulation of SAPK6, NTF4, PYL6, and GPX4 in SL treatment compared with drought-only treatment. In particular, the key gene for SL signal transduction, SMXL6, was down-regulated under drought. These results elucidate the molecular aspects underlying SL-mediated plant DS tolerance, and provide pivotal strategies for effectively achieving pepper drought resilience.

Improving the ionic conductivity and slow oxygen reduction electro-catalytic activity of reactions occurring at low operating temperature would do wonders for the widespread use of low-operating temperature ceramic fuel cells (LT-CFCs; 450–550 °C). In this work, we present a novel semiconductor heterostructure composite made of a spinel-like structure of Co0.6Mn0.4Fe0.4Al1.6O4 (CMFA) and ZnO, which functions as an effective electrolyte membrane for solid oxide fuel cells. For enhanced fuel cell performance at sub-optimal temperatures, the CMFA–ZnO heterostructure composite was developed. We have shown that a button-sized SOFC fueled by H2 and ambient air can provide 835 mW/cm2 of power and 2216 mA/cm2 of current at 550 °C, possibly functioning down to 450 °C. In addition, the oxygen vacancy formation energy and activation energy of the CMFA–ZnO heterostructure composite is lower than those of the individual CMFA and ZnO, facilitating ion transit. The improved ionic conduction of the CMFA–ZnO heterostructure composite was investigated using several transmission and spectroscopic measures, including X-ray diffraction, photoelectron, and UV–visible spectroscopy, and density functional theory (DFT) calculations. These findings suggest that the heterostructure approach is practical for LT-SOFCs.

The challenging research topic for developing low-temperature ceramic fuel cells (LT-CFCs) is to design electrolytes with sufficient ionic conductivity either via doping or composite semiconductors with ionic conductors. Following this challenging topic, we have developed and synthesized a novel semiconductor ionic heterostructure La0.8Sr0.2Co0.8Fe0.2O3-Gd0.1Ce0.9O2 (LSCF-GDC) with different compositions and deployed it as an electrolyte to realize the functionality of the fuel cell. The developed LSCF-GDC electrolyte with mixed conduction of ions and protons possesses high ionic conductivity with only 0.06 Ohm·cm2 of ohmic area-specific resistance for the electrolyte component. The fuel cell using 3LSCF-7GDC as the electrolyte exhibits the best fuel cell performance of 1060 mW·cm−2 and an open circuit voltage (OCV) of 1.11 V at a low operating temperature of 550 °C among individual GDC, LSCF, and different heterostructures of LSCF and GDC. The attained performance and ionic conductivity are specially accredited to constructing heterostructures and massively deficient structures at the interface of the LSCF and GDC. The advanced semiconductor ionic heterostructure of LSCF-GDC provides new insight into designing new electrolytes with high ionic conductivity for LT-CFC applications.

There is tremendous potential for both small- and large-scale applications of low-temperature operational ceramic fuel cells (LT-CFCs), which operate between 350 °C and 550 °C. Unfortunately, the low operating temperature of CFCs was hampered by inadequate oxygen reduction electrocatalysts. In this work, the electrochemical characteristics of a semiconductor heterostructure composite based on WO3-CaFe2O4 deposited over porous Ni-foam are investigated. At low working temperatures of 450–500 °C, the developed WO3-CaFe2O4 pasted on porous Ni–foam heterostructure composite cathode exhibits very low area-specific resistance (0.78 Ω cm2) and high oxygen reduction reaction (ORR) activity. For button-sized SOFCs with H2 and atmospheric air fuels, we have demonstrated high-power densities of 508 mW cm−2 running at 550 °C, and even potential operation at 450 °C, using WO3-CaFe2O4 seeded on porous Ni-foam cathode. Moreover, WO3-CaFe2O4 composite heterostructure with Ni foam paste exhibits very low activation energy compared to both WO3 and CaFe2O4 alone, which supports ORR activity. To comprehend the enhanced ORR electrocatalytic activity of WO3-CaFe2O4 pasted on porous Ni-foam heterostructure composite, several spectroscopic tests including X-ray diffraction (XRD), photoelectron spectroscopy (XPS), and electrochemical impedance spectroscopy (EIS) were used. The findings may also aid in the creation of useful cobalt-free electrocatalysts for LT-SOFCs.

Low-temperature solid fuel cells (LT-SOFCs) hold remarkable promise for the cooperative corporation of small- and large-scale applications. However, the meager oxygen-reduction retort of cathode materials mires the low operating temperature conditions of SOFCs. Herein, we have developed a perovskite structured LaFeO3 by the co-doping of Gd and Ce ions, and their electrochemical properties have been studied. The developed LaFe0.8Gd0.1Ce0.1O3-δ cathode exhibits very small-area-specific-resistance and good oxygen-reduction reaction (ORR) activity at low operating temperatures of 450–500 °C. We have demonstrated a high-power density of 0.419 W-cm−2 with a LaFe0.8Gd0.1Ce0.1O3-δ cathode operating at 550 °C with H2 and atmospheric air as fuels. Moreover, LaFe0.8Gd0.1Ce0.1O3-δ exhibits high activation energy as compared to individual LaFeO3, which helps to promote ORR activity. Various spectroscopic measurements such as X-ray diffraction, SEM, EIS, UV-visible, TGA, Ramana, and photoelectron spectroscopy were employed to understand the improved ORR electrocatalytic activity of Gd and Ce co-doped LaFeO3 cathode. The results can further help to develop functional cobalt-free electro-catalysts for LT-SOFCs.

In recent years, tuning perovskite and fluorite-based materials and modifying them to ionic conductors has been an interesting but challenging topic for advanced low-temperature ceramic fuel cells (LT-CFCs). In this regard, we prepared a new composite heterostructure, BaCe0.4Zr0.4Y0.1Yb0.1O3-Sm0.2Ce0.8O2 (BCZYYb-SDC), and evaluated it as an electrolyte to realize the fuel cell reaction. The developed electrolyte could be a hybrid ionic conductor, possess a very small ohmic area-specific resistance, and exhibit excellent fuel cell performance of over 1.0 W/cm2 along with higher OCV of more than 1.1 V at a low operating temperature of 550 °C. The attained performance and ionic conductivity are specially accredited to constructing the heterostructure of BCZYYb-SDC. Moreover, various spectroscopy and microscopic analysis methods have been used to investigate the ions’ transportation, while on the other hand suppressing the electronic conduction. The developed composite heterostructure proposes and suggests new insight to design new electrolytes for LT-CFCs.

Zinc oxide, a direct band gap semiconductor of ≥3.30 eV, is prevalent in potential requests for energy devices. The early-stage demonstration of ZnO provides a new method of developing high ionic conductivity in multifunctional semiconductors for electrolyte applications in ceramic fuel cells (CFCs). In the present work, we successfully synthesized Na-doped ZnO nanorods by a hydrothermal method and employed them as an electrolyte in CFCs. The synthesized Na-doped-ZnO nanorods showed an effective ionic conductivity of 8.75 × 10−2 S cm−1 along with an excellent power density of 609 mWcm−2 ± 5% when the fuel cell was operating at 550 °C. The enhanced ionic conductivity could be due to Na+ doping into Zn2+ and the high ionic radius of Na ions producing bulk oxygen vacancies in the ZnO structure to conduct oxygen ions or protons. Furthermore, we used experimental analysis, such as X-ray diffraction (XRD), high-resolution transmission electron microscopy (HR-TEM), scanning electron microscopy (SEM), ultraviolet–visible (UV–visible), X-ray photoelectron spectroscopy (XPS), and electrochemical impedance spectroscopy (EIS), to evaluate the change in structural properties and mechanism of ionic transport in ZnO nanorods with sodium doping. The presented work provides insight into a novel approach of developing the high ionic conductivity of electrolytes in a low-cost ZnO semiconductor material.

Lately, ceramic fuel cells (CFCs) have held exceptional promise for joint small- and large-scale applications. However, the low-oxygen reduction response of cathode materials has hindered the low operating temperature of CFCs. Herein, we have developed a semiconductor based on La and Ce co-doped SrCoO3 and embedded them in porous Ni-foam to study their electrochemical properties. The porous Ni-foam-pasted La0.2Sr0.8Co0.8Ce0.2O3‒δ cathode displays small-area-specific resistance and excellent ORR (oxygen reduction reaction) activity at low operating temperatures (LT) of 450–500 °C. The proposed device has delivered an impressive fuel cell performance of 440 mW-cm−2, using La0.2Sr0.8Co0.8Ce0.2O3−δ embedded on porous Ni-foam substrate cathode operation at 550 °C with H2 fuel and atmospheric air. It even can function well at a lower temperature of 450 °C. Moreover, La0.2Sr0.8Co0.8Ce0.2O3−δ embedded on porous Ni-foam shows very good activation energy compared to individual SrCoO3 and La0.1Sr0.9Co0.9Ce0.1O3−δ embedded on porous Ni-foam, which help to promote ORR activity. Different characterization has been deployed, likewise: X-ray diffraction, photoelectron-spectroscopy, and electrochemical impedance spectroscopy for a better understanding of improved ORR electrocatalytic activity of prepared La0.2Sr0.8Co0.8Ce0.2O3−δ embedded on porous Ni-foam substrate. These results can further help to develop functional cobalt-free electrocatalysts for LT-SOFCs.

Environmental variations caused by global climate change significantly affect plant yield and productivity. Because water scarcity is one of the most significant risks to agriculture’s future, improving the performance of plants to cope with water stress is critical. Our research scrutinized the impact of melatonin application on the photosynthetic machinery, photosynthetic physiology, root system, osmoprotectant accumulation, and oxidative stress in tomato plants during drought. The results showed that melatonin-treated tomato plants had remarkably higher water levels, gas exchange activities, root system morphological parameters (average diameter, root activity, root forks, projected area, root crossings, root volume, root surface area, root length, root tips, and root numbers), osmoprotectant (proline, trehalose, fructose, sucrose, and GB) accumulation, and transcript levels of the photosynthetic genes SlPsb28, SlPetF, SlPsbP, SlPsbQ, SlPetE, and SlPsbW. In addition, melatonin effectively maintained the plants’ photosynthetic physiology. Moreover, melatonin treatment maintained the soluble protein content and antioxidant capacity during drought. Melatonin application also resulted in membrane stability, evidenced by less electrolyte leakage and lower H2O2, MDA, and O2− levels in the drought-stress environment. Additionally, melatonin application enhanced the antioxidant defense enzymes and antioxidant-stress-resistance-related gene (SlCAT1, SlAPX, SlGR, SlDHAR, SlPOD, and SOD) transcript levels in plants. These outcomes imply that the impacts of melatonin treatment on improving drought resistance could be ascribed to the mitigation of photosynthetic function inhibition, the enhancement of the water status, and the alleviation of oxidative stress in tomato plants. Our study findings reveal new and incredible aspects of the response of melatonin-treated tomato plants to drought stress and provide a list of candidate targets for increasing plant tolerance to the drought-stress environment.

Zinc oxide (ZnO), a direct wide band gap semiconductor (≥3.30 eV), has widespread potential for applications in energy devices and related industries. The initial physical demonstration of ZnO in ceramic fuel cells (CFCs) gave a new view of developing high ionic conductivity for multifunctional semiconductor technology. However, in the present work, we successfully synthesized highly textured nanoparticles of ZnO using a hydrothermal method followed by sintering in a reducing atmosphere. The resultant ZnO materials as electrolytes showed efficient ionic conductivity (5.28 × 10−2 S cm−1) and an excellent power density of 520 mW cm−2 ± 5% at 550 °C for low-temperature ceramic fuel cells (LT-CFCs). The achievement of enhanced ionic conductivity without any external ions or cation doping in the CFC was anticipated, since there was a rare possibility of vacancies in the bulk ZnO structure to conduct oxygen ions or protons. Therefore, we found that laterally the surfaces of the ZnO nanoparticles could be textured to become oxygen-deficient when sintered in an H2 atmosphere, which suggests a special mechanism for effective ionic transport. Furthermore, experimental analyses such as SEM, XPS, UV–visible, and EIS methods were performed to analyze the changes in the structural properties and mechanism of ionic transport in ZnO nanoparticles. The presented work provides insights into a novel approach for developing high ionic conductivity in electrolytes in low-cost semiconductor oxides such as ZnO for energy storage and conversion devices.

Water scarcity has emerged as an intense global threat to humanity and needs prompt attention from the scientific community. Solar-driven interfacial evaporation and seawater desalination are promising strategies to resolve the primitive water shortage issue using renewable resources. However, the fragile solar thermal devices, complex fabricating techniques, and high cost greatly hinder extensive solar energy utilization in remote locations. Herein, we report the facile fabrication of a cost-effective solar-driven interfacial evaporator and seawater desalination system composed of carbon cloth (CC)-wrapped polyurethane foam (CC@PU). The developed solar evaporator had outstanding photo-thermal conversion efficiency (90%) with a high evaporation rate (1.71 kg m−2 h−1). The interfacial layer of black CC induced multiple incident rays on the surface allowing the excellent solar absorption (92%) and intensifying heat localization (67.37 °C) under 1 kW m−2 with spatially defined hydrophilicity to facilitate the easy vapor escape and validate the efficacious evaporation structure using extensive solar energy exploitation for practical application. More importantly, the long-term evaporation experiments with minimum discrepancy under seawater conditions endowed excellent mass change (15.24 kg m−2 in consecutive 8 h under 1 kW m−2 solar irradiations) and promoted its operational sustainability for multi-media rejection and self-dissolving potential (3.5 g NaCl rejected from CC@PU surface in 210 min). Hence, the low-cost and facile fabrication of CC@PU-based interfacial evaporation structure showcases the potential for enhanced solar-driven interfacial heat accumulation for freshwater production with simultaneous salt rejection.

Solar-driven evaporation is a promising technology for desalinating seawater and wastewater without mechanical or electrical energy. The approaches to obtaining fresh water with higher evaporation efficiency are essential to address the water-scarcity issue in remote sensing areas. Herein, we report a highly efficient solar evaporator derived from the nanocomposite of anatase TiO2/activated carbon (TiO2/AC), which was coated on washable cotton fabric using the dip-dry technique for solar water evaporation. The ultra-black fabric offers enhanced solar absorption (93.03%), hydrophilic water transport, and an efficient evaporation rate of 1.65 kg/m2h under 1 kW m−2 or one sun solar intensity. More importantly, the sideways water channels and centralized thermal insulation of the designed TiO2/AC solar evaporator accumulated photothermal heat at the liquid and air interface along with an enhanced surface temperature of 40.98 °C under one sun. The fabricated solar evaporator desalinated seawater (3.5 wt%) without affecting the evaporation rates, and the collected condensed water met the standard of drinking water set by the World Health Organization (WHO). This approach eventually enabled the engineering design groups to develop the technology pathways as well as optimum conditions for low-cost, scalable, efficient, and sustainable solar-driven steam generators to cope with global water scarcity.

Auxin/indole-3-acetic acid (Aux/IAA) is a transcriptional repressor in the auxin signaling pathway that plays a role in several plant growth and development as well as fruit and embryo development. However, it is unclear what role they play in Japanese apricot (Prunus mume) fruit development and maturity. To investigate the role of Aux/IAA genes in fruit texture, development, and maturity, we comprehensively identified and expressed 19 PmIAA genes, and demonstrated their conserved domains and homology across species. The majority of PmIAA genes are highly responsive and expressed in different hormone treatments. PmIAA2, PmIAA5, PmIAA7, PmIAA10, PmIAA13, PmIAA18, and PmIAA19 showed a substantial increase in expression, suggesting that these genes are involved in fruit growth and maturity. During fruit maturation, alteration in the expression of PmIAA genes in response to 1-Methylcyclopropene (1-MCP) treatment revealed an interaction between auxin and ethylene. The current study investigated the response of Aux/IAA development regulators to auxin during fruit ripening, with the goal of better understanding their potential application in functional genomics.

Environmental stresses negatively affect the growth and development of plants. Several previous studies have elucidated the response mechanisms of plants to drought and heat applied separately; however, these two abiotic stresses often coincide in environmental conditions. The global climate change pattern has projected that combined drought and heat stresses will tend to increase in the near future. In this study, we down-regulated the expression of a cytokinin receptor gene SlHK2 using RNAi and investigated the role of this gene in regulating plant responses to individual drought, heat, and combined stresses (drought + heat) in tomato. Compared to the wild-type (WT), SlHK2 RNAi plants exhibited fewer stress symptoms in response to individual and combined stress treatments. The enhanced abiotic stress tolerance of SlHK2 RNAi plants can be associated with increased membrane stability, osmoprotectant accumulation, and antioxidant enzyme activities. Furthermore, photosynthesis machinery was also protected in SlHK2 RNAi plants. Collectively, our results show that down-regulation of the cytokinin receptor gene SlHK2, and consequently cytokinin signaling, can improve plant tolerance to drought, heat, and combined stress.

High ionic conductivity in low-cost semiconductor oxides is essential to develop electrochemical energy devices for practical applications. These materials exhibit fast protonic or oxygen-ion transport in oxide materials by structural doping, but their application to solid oxide fuel cells (SOFCs) has remained a significant challenge. In this work, we have successfully synthesized nanostructured monoclinic WO3 through three steps: co-precipitation, hydrothermal, and dry freezing methods. The resulting WO3 exhibited good ionic conductivity of 6.12 × 10−2 S cm−1 and reached an excellent power density of 418 mW cm−2 at 550 °C using as an electrolyte in SOFC. To achieve such a high ionic conductivity and fuel cell performance without any doping contents was surprising, as there should not be any possibility of oxygen vacancies through the bulk structure for the ionic transport. Therefore, laterally we found that the surface layer of WO3 is reduced to oxygen-deficient when exposed to a reducing atmosphere and form WO3−δ/WO3 heterostructure, which reveals a unique ionic transport mechanism. Different microscopic and spectroscopic methods such as HR-TEM, SEM, EIS, Raman, UV-visible, XPS, and ESR spectroscopy were applied to investigate the structural, morphological, and electrochemical properties of WO3 electrolyte. The structural stability of the WO3 is explained by less dispersion between the valence and conduction bands of WO3−δ/WO3, which in turn could prevent current leakage in the fuel cell that is essential to reach high performance. This work provides some new insights for designing high-ion conducting electrolyte materials for energy storage and conversion devices.

Recently, appreciable ionic conduction has been frequently observed in multifunctional semiconductors, pointing out an unconventional way to develop electrolytes for solid oxide fuel cells (SOFCs). Among them, ZnO and Li-doped ZnO (LZO) have shown great potential. In this study, to further improve the electrolyte capability of LZO, a typical ionic conductor Sm0.2Ce0.8O1.9 (SDC) is introduced to form semiconductor-ionic composites with LZO. The designed LZO-SDC composites with various mass ratios are successfully demonstrated in SOFCs at low operating temperatures, exhibiting a peak power density of 713 mW cm−2 and high open circuit voltages (OCVs) of 1.04 V at 550 °C by the best-performing sample 5LZO-5SDC, which is superior to that of simplex LZO electrolyte SOFC. Our electrochemical and electrical analysis reveals that the composite samples have attained enhanced ionic conduction as compared to pure LZO and SDC, reaching a remarkable ionic conductivity of 0.16 S cm−1 at 550 °C, and shows hybrid H+/O2− conducting capability with predominant H+ conduction. Further investigation in terms of interface inspection manifests that oxygen vacancies are enriched at the hetero-interface between LZO and SDC, which gives rise to the high ionic conductivity of 5LZO-5SDC. Our study thus suggests the tremendous potentials of semiconductor ionic materials and indicates an effective way to develop fast ionic transport in electrolytes for low-temperature SOFCs.

Ischemic stroke is worsened by the presence of sudden high blood sugar levels, even in individuals without pre-existing diabetes. This elevated glucose concentration hampers the ability of energy-starved brain cells to efficiently use it as a source of energy. Consequently, this leads to the production of abundant amounts of toxic glucose metabolites, which trigger oxidative stress in the brain milieu, particularly in the microvasculature of the brain. A prominent feature of this oxidative stress is the demise of endothelial cells, causing detrimental changes in blood vessels, including a reduction in their vascular diameter, a decreased efficiency of vessel proliferation, and the impaired integrity of tight junctions. These vascular pathologies contributed to an increase in the volume of damaged tissues (infarct), an exacerbation of brain swelling (edema), and a decline in cognitive and motor functions. In a mouse model of ischemic stroke with induced acute hyperglycemia, a naturally occurring saturated fatty acid provides protective cover to the microvasculature by preventing damage related to oxidative stress. Our current research revealed that lauric acid (LA) attenuated infarct volume and reduced brain edema by reducing endothelial cell death, enhancing vessels’ diameter, promoting vascular angiogenesis, and stabilizing barrier functions. Animals administered with this natural compound showed a significant reduction in 4-HNE-positive vessels. In conclusion, natural saturated fatty acids help to preserve brain microvascular functions following ischemic insults in the presence of acute hyperglycemia.