Search

In the olive oil industry, a pit fraction is collected from olive pomace and split into a clean pit fraction and a residual olive skin-rich fraction, which does not an industrial application. Therefore, in this work, microwave-assisted extraction (MAE) was applied to obtain high-value triterpene acids (maslinic acid and oleanolic acid) from this biomass using the renewable solvent ethanol. The response surface methodology was used to gain a deeper understanding of how the solvent (ethanol–water, 50–100% v/v), time (4–30 min), and temperature (50–120 °C) affect the extraction performance, as well as the energy required for the process. The effect of milling was also studied and the solid-to-liquid ratio was also evaluated, and overall, a good compromise was found at 10% (w/v) using the raw sample (unmilled biomass). The optimised conditions were applied to residual olive skin sourced from various industries, yielding up to 5.1 g/100 g and 2.2 g/100 g dry biomass for maslinic acid and oleanolic acid, respectively. In conclusion, the residual olive skin is a promising natural source of these triterpene acids, which can be extracted using MAE, releasing extracted solids rich in polymeric carbohydrates and lignin that can be valorised under a holistic biorefinery process.

Exhausted olive pomace (EOP) represents the principal residue of olive pomace. Several studies have optimized the extraction of specialized metabolites from the EOP of Olea europaea L., but a comparison between different extractive methods has not been made. For this reason, the present investigation aims to compare four different extractive methods by using water and 15% ethanol/water as extractive solvents. Specifically, based on extract antioxidant activity, the methods compared were maceration (MAC), microwave-assisted extraction (MAE), ultrasound-assisted extraction (UAE), and Accelerated Solvent Extraction (ASE). Between these, the UAE and ASE hydroalcoholic EOP extracts were demonstrated to have the highest antioxidant activity. Subsequently, these extracts were investigated for their hypoglycemic and antiradical activity using in vitro cell-free and cell-based assays, respectively. ASE hydroalcoholic EOP extract demonstrated the greatest ability to inhibit the α-amylase enzyme and an in vitro antioxidant activity comparable to N-acetyl cysteine in HepG2 cells. UAE and ASE extracts’ phytochemical characterization was also performed, identifying seven phenolic compounds, including 3-hydroxytyrosol, tyrosol, and, for the first time, salidroside. The ASE hydroalcoholic EOP extract was the richest from a phytochemical point of view, thus confirming its major biological activity. Therefore, ASE and 15% ethanol/water may represent the best extractive method for EOP nutraceutical valorization.

Conducted in Southern Italy’s Calabria region, this study aimed to repurpose olive wastes, which are still a source of valuable biomolecules including plant nutrients, flavonoids, polysaccharides, and phenolic compounds, into compost to be used in sustainable agriculture as fertilizers, in alternative to synthetic substances. The compost underwent chemical analysis and soil fertility testing to support eco-friendly agricultural practices. Factors like extraction process, waste composition, and percentage of waste in composting were studied for their impact. The research evaluated compost fertilizing effectiveness by analyzing soil chemical and biological properties 180 days after the application. The results demonstrated that the proportion of olive oil waste and the olive oil extraction method significantly impacted compost quality and its environmental footprint. All composts improved soil properties but to a different extent. Compost olive waste 3 (OWC3; 34% olive oil waste, 33% buffalo manure, and 33% straw) was the most effective in enhancing soil fertility. Compost olive waste 1 (OWC1), with the same olive waste percentage as compost olive waste 2 (OWC2) but from a different extraction process, outperformed OWC2 in enhancing soil fertility and microbial activity. The research highlighted the importance of organic matter addition to soil and the significant role of both raw material percentage and extraction process in compost quality. Life cycle assessment indicated that OWC3 had the lowest environmental impact and the highest fertilizing power. Composting represents a practical way to manage organic wastes and improve soil quality, providing essential nutrients for soil health and ecosystem functioning.

Olive oil production is characterized by large amounts of waste, and yet is considerably highly valued. Olive pomace can serve as a cheap source of bioactive compounds (BACs) with important antioxidant activity. Novel technologies like Pulsed Electric Fields (PEF) and High Pressure (HP) and microwave (MW) processing are considered green alternatives for the recovery of BACs. Different microwave (150–600 W), PEF (1–5 kV/cm field strength, 100–1500 pulses/15 µs width), and HP (250–650 MPa) conditions, in various product/solvent ratios, methanol concentrations, extraction temperatures, and processing times were investigated. Results indicated that the optimal MW extraction conditions were 300 W at 50 °C for 5 min using 60% v/v methanol with a product/solvent ratio of 1:10 g/mL. Similarly, the mix of 40% v/v methanol with olive pomace, treated at 650 MPa for the time needed for pressure build-up (1 min) were considered as optimal extraction conditions in the case of HP, while for PEF the optimal conditions were 60% v/v methanol with a product/solvent ratio of 1:10 g/mL, treated at 5000 pulses, followed by 1 h extraction under stirring conditions. Therefore, these alternative extraction technologies could assist the conventional practice in minimizing waste production and simultaneously align with the requirements of the circular bioeconomy concept.

Olive pomace is an agro-industrial waste product generated from the olive oil industry and constituted by bioactive compounds with potential applications in several industrial sectors. The purpose of this work was to evaluate the effects of electron beam (e-beam) radiation on olive pomace, specifically on phenolic compounds (by HPLC–DAD–ESI/MS) and the bioactive properties (antioxidant, antiproliferative, and antimicrobial activities) of crude olive pomace (COP) and extracted olive pomace (EOP) extracts. The amount of total flavonoid content and the reducing power of COP extracts were higher than those obtained for EOP extracts. The results suggested that e-beam radiation at 6 kGy increased both total phenolic and total flavonoid contents as well as the reducing power of COP extracts, due to the higher extractability (>2.5-fold) of phenolic compounds from these samples, while decreasing the scavenging activity of extracts. The extracts of both olive pomaces showed antibacterial potential, and COP extracts at 400 µg/mL also presented antiproliferative activity against A549, Caco-2, 293T, and RAW264.7 cell lines, with both properties preserved with the e-beam treatment. All in all, e-beam radiation at 6 kGy appears to be a promising technology to valorize the pollutant wastes of the olive oil industry through enhancing phenolic extractability and bioactive properties, and, furthermore, to contribute to the environmental and economical sustainability of the olive oil industry.

The evolution of wheat bread as a dietary staple underscores its essential role in providing energy, protein, fiber, and vital nutrients. To address contemporary health challenges such as type 2 diabetes and cardiovascular diseases, fortifying wheat bread with health-promoting additives becomes imperative to mitigate deficiencies resulting from refined wheat flour consumption. Functional food innovations, aligned with sustainability goals and circular economy principles, offer promising approaches for addressing these concerns. Integrating by-products from fruits and oil crops into bread formulations enhances health benefits by boosting dietary fiber, bioactive compounds, and antioxidant potential. However, gaps persist in understanding anti-nutritional substances and contaminants in final products, necessitating further research for comprehensive safety assessments. The addition of by-product raw materials significantly influences dough rheology and sensory characteristics, potentially achieving quality comparable to traditional wheat bread. Challenges include inconsistencies in bread and by-product specifications across studies, hindering direct result comparison. Overcoming these obstacles is crucial for maximizing the potential of agri-food by-products in creating healthier, sustainable bread options while maintaining safety and quality standards.

This study explores the bioactive potential of olive mill waste derived from cultivars grown in the Maltese Islands through various analytical approaches. Cell culture, cell staining, allelopathic assays, shrimp brine lethality assays, and HPLC analysis were conducted to assess the efficacy and bioactivity of the extracts using different treatments, including methanolic extraction, acid, and alkaline hydrolysis. Notably, the results from cell lines revealed that NB4r2 cells exhibited high susceptibility to the tested extracts, with the lowest IC50 recorded after 72 h of exposure. Notably, the ‘Bajda’ cultivar displayed the most effectiveness, particularly with acid hydrolysis. In allelopathic assays, higher concentrations of ‘Malti’, ‘Bidni’, and ‘Bajda’ extracts significantly inhibited lettuce seed germination. Similarly, in the brine shrimp lethality assay, higher concentrations led to increased mortality rates of Artemia salina, though rates decreased at lower concentrations. The identification of phenolic compounds found in olive mill waste was conducted using high-performance liquid chromatography (HPLC) with the use of internal standards. The identification revealed a variety of compounds, with 3-hydroxytyrosol and oleacein being present in high abundance in nearly all hydrolyzed and methanolic extracts, whereas gallic acid was found to be the least abundant. These findings highlight the rich bioactive potential of olive mill waste and provide insights into its applications in pharmaceuticals, nutraceuticals, and agriculture, emphasizing the importance of further research to fully exploit these valuable resources.

At present, taking into account the sustainability of the starting matrices, the biogas production industry is continuously growing, especially in consideration of ecological transition and circularity. The present study deals with the development of anaerobic bioreactors aimed at valorizing two specific wastes of the olive oil supply chain, i.e., the residual of protein hydrolysis process of three-phases olive pomace (OP-PH) and that recovered after the extraction of bioactive molecules from olive mill wastewater (OMWW waste). The energy consumed for biogas production varied from 0.52 kJ (OP and OMWW waste) to 0.97 kJ (OP-PH), while the energy produced for OP, OP-PH and OMMW waste was equal to 1.73, 2.94 and 1.60 kJ, respectively. The optimal production period was defined by considering only the range showing energy production higher than its consumption. According to this, OMWW showed the best performances, since it required 9 days (instead of 12 of untreated and treated OP) to reach the completion. The biogas production efficiency of the three-phase OP-PH waste calculated in the optimal production period, i.e., 12 days, was higher than the other samples, with a yield of 76.7% and a quantity of energy potentially producible corresponding to 1727.8 kJ/kg of volatile solids. These results pave the way for possible applications of this procedure for the planning of a multi-purpose biorefinery fed with by-products from the olive supply chain waste, thus promoting the use of sustainable waste materials from a circular economy perspective.

Mediterranean countries are known for their high-quality olives and the production and consumption of olive oil. Olive pomace (OP), the major by-product of olive oil extraction, is receiving attention for its potential as a functional compound in food products, reflecting its physiology- and health-promoting attributes. This study assessed the physico-chemical characteristics of OP obtained from two Sardinian olive cultivars, Bosana and Semidana, and the effect of OP incorporation on the baking performance of wheat dough. We assessed the rheological parameters, pasting profile, and fermentation of doughs obtained through the partial substitution of wheat flour with OP at 0 (control), 1, 2, 3, and 5%. OP inclusion resulted in significant differences in the studied parameters compared with control samples. Positive effects included a decrease in development time, improved dough stability and storage, and superior loss modulus and gas retention capacity. Negative effects comprised an increase in dough resistance and a decrease in dough development height, gas production, gas retention, pasting profile, stickiness, and elasticity. These differences in the OP dough were due to the interactions between polyphenols and fibre with water and the starch–gluten matrix. This study found improvements in dough characteristics following the substitution of wheat flour with low percentages of OP, especially Semidana at 1%. Although higher percentages of OP would be associated with greater nutritional and health benefits, they resulted in a degradation of the dough’s attributes, producing a gluten-free-like matrix in the final product.

Olive pomace results from the production of olive oil. Even if olive pomace represents a potential environmental problem, it contains phenolic compounds, which are widely recognized for their beneficial properties for human health. In this study, an innovative and sustainable technological approach to extract phenolic compounds from fresh olive pomace, based on food-grade solvent instead of those usually adopted, is investigated. Characterization and shelf-life evaluation of the hydroalcoholic extracts obtained from the procedure developed for different industrial purposes were also carried out. The phenolic fractions of the different samples were studied with the Folin–Ciocâlteu method to quantify that the total reducing molecules and HPLC-MS/MS analysis was used to define the profile through the identification and quantification of 42 compounds, belonging to five chemical families. Regarding shelf-life, the hydroalcoholic extract showed no significant reduction in phenolic content, for both instrumental evaluations, retaining most of the phenolic compounds present in the raw material; negative attributes were not perceived by sensory evaluation. Thus, these lab-scale results can be the starting point to develop a procedure that is suitable for a real olive mill, representing a valorization strategy in a circular economy and the perspective of new business models.

The use of a two-phase decanter (TwPD) for olive-oil extraction produces wastes and byproducts (a small volume of water from oil washing, olive leaves from the defoliator, and a high moisture pomace which can be destoned) that contain valuable bioactive compounds, such as phenolics and/or triterpenic acids. So far, there is no (water) or limited information (leaves and the destoned pomace fraction) on their content of bioactives, especially triterpenic acids. To contribute to the characterization of such streams from cultivars of international interest, in the present study, samples obtained from five mills from the region of Laconia (from one or two harvests) in Greece, where Koroneiki cv dominates, were screened for phenols and/or triterpenic acids. The leaves and pomace were dried at two temperatures (70 °C and/or 140 °C), and the pomace was also destoned before analysis. The liquid wastes contained low amounts of total (TPC) phenols (

The integration of green technologies such as microwave- and enzyme-assisted extraction (MEAE) has been shown to improve the extraction efficiency of bioactive compounds while reducing processing time and costs. MEAE using tannase alone (MEAE-Tan), or in combination with cellulase and pectinase (MEAE-Tan-Cel-Pec), was optimized to produce enriched phenolic and antioxidant extracts from olive pomace. The individual and integrated impact of enzyme concentration, temperature, and pomace/water ratio were determined using a central composite rotatable design. Optimal extraction conditions for MEAE-Tan (60 °C, 15 min, 2.34% of enzyme (w/w), and 1:15 pomace/water ratio) and MEAE-Tan-Cel-Pec (46 °C, 15 min, 2% of enzymes (w/w), in the proportion of 1:1:1, and 1:20 pomace/water ratio) resulted in extracts containing 7110.6 and 2938.25 mg GAE/kg, respectively. The antioxidant activity of the extracts was correlated with phenolic acid release, which was enzyme-dependent, as determined with HPLC-DAD analysis. Enzyme selection had a significant impact on the phenolic profile of extracts, with tannase releasing high concentrations of chlorogenic acid and the combined use of enzymes releasing high concentrations of hydroxytyrosol and chlorogenic and ferulic acids. The novelty of this study relies on the integration and optimization of two green technologies (microwave- and enzyme-assisted extraction) to improve the extraction efficiency of bioactive phenolics from olive pomace while reducing processing time and costs. While these techniques have been evaluated isolated, the benefits of using both processing strategies simultaneously remain largely unexplored. This study demonstrates the effectiveness of the integration and processing optimization of two environmentally friendly technologies as a promising alternative to treat agro-industrial byproducts.

In the olive oil industry, a pit fraction is collected from olive pomace and split into a clean pit fraction and a residual olive skin-rich fraction, which does not an industrial application. Therefore, in this work, microwave-assisted extraction (MAE) was applied to obtain high-value triterpene acids (maslinic acid and oleanolic acid) from this biomass using the renewable solvent ethanol. The response surface methodology was used to gain a deeper understanding of how the solvent (ethanol-water, 50-100% v / v ), time (4-30 min), and temperature (50-120 °C) affect the extraction performance, as well as the energy required for the process. The effect of milling was also studied and the solid-to-liquid ratio was also evaluated, and overall, a good compromise was found at 10% ( w / v ) using the raw sample (unmilled biomass). The optimised conditions were applied to residual olive skin sourced from various industries, yielding up to 5.1 g/100 g and 2.2 g/100 g dry biomass for maslinic acid and oleanolic acid, respectively. In conclusion, the residual olive skin is a promising natural source of these triterpene acids, which can be extracted using MAE, releasing extracted solids rich in polymeric carbohydrates and lignin that can be valorised under a holistic biorefinery process.

In this study, the drying of olive pomace in a hot-air-assisted radio frequency system (HA–RF) was conducted, and its effects on crude olive pomace oil quality were investigated. In this respect, the effects of radiofrequency electrode distance (90, 105 and 120 mm), sample thickness (2.5, 5, 7.5 and 10 cm) and compaction density (~0.45, ~0.60 and ~0.82 g/cm3) on drying rate have been evaluated. The best drying, with a higher drying efficiency, was obtained with 1 kg of sample weight and a 10 cm product thickness, ~0.45 g/cm3 compaction density and 105 mm electrode distance. Moreover, the results showed that the compaction density significantly affects the drying rate. The drying time was prolonged by approximately four times by increasing the compaction density from ~0.45 to ~0.82 g/cm3. The drying rate of olive pomace in HA–RF drying was compared with drying performed using hot air (HA) and radiofrequency (RF). The results revealed that HA–RF application reduced the drying time by almost 1.7 times compared to hot air drying and by about 2.7 times compared to radiofrequency. The peroxide value, free fatty acid content, p-anisidine value, polyaromatic hydrocarbon content, L*, a*, b*, chlorophyll and total carotenoid content of the oil extracted from the olive pomace dried under the best drying conditions were 1.09%, 12.2 meq O2/kg oil, 3.01,

Maintaining adequate levels of soil organic matter in Mediterranean agro-ecosystems is a pressing need due to the increasing evidence of climate change. The use of by-products of the olive oil industry as organic amendments could contribute to this goal. We report the results of a 2-year research carried out in southern Italy on a clay loam soil for evaluating the effects of different olive oil industry by-products on soil organic carbon and other related soil characteristics. The treatments were: (i) Olive mill wastewater (OMW), (ii) compost from olive pomace (CP1), (iii) compost from olive pomace in double quantity (CP2), and (iv) organo-mineral fertilizer (OMF). Soil samples, collected at a depth of 0–20 cm, were analyzed for total organic carbon (TOC), its extractable (TEC) and humic fractions (HC), and aggregate stability (Ist). In addition, soil macroporosity, water retention, and penetration resistance (PR) were evaluated. CP1 induced the largest increase in soil TOC, TEC, and HC content, and a significant improvement in Ist; the addition of a large quantity of organic carbon (CP2) did not determine a proportional increase in soil organic matter content. The aggregate stability of the CP2 was the lowest; nevertheless, the characterization of macroporosity indicated an improvement of soil structure functionality. With respect to control (OMF), OMW had a significant decrease in Ist and an increase in PR of the uppermost soil layer.

Olive pomace is a by-product of olive oil production that is toxic to the environment. The purpose of this study was to evaluate the methods of olive pomace valorization through the implementation of novel technology, the so-called microwave-assisted extraction process. To determine the total polyphenol content (TPC) and antioxidant activity (AA), polyphenol extraction using MAE was performed. Response surface methodology was used to determine the best extraction conditions, whereby the effects of three factors, solid ratio (g/50 mL), time (s), and power (W), were measured. The ferric reducing antioxidant power (FRAP) method was used to assess AA, whereas the spectrophotometric Folin–Ciocalteu (FC) method was used to determine TPC. The highest TPC of 15.30 mg of gallic acid equivalents per gram of dried weight (mg GAE/gdw) was generated after 105 s at 450 W, with a solid concentration of 1 g/50 mL, while the maximum AA was 10 mg of ascorbic acid equivalents per gram of dried weight (mg AAE/gdw). Numerical optimization revealed that 800 W, 180 s, and 1 g/50 mL were the best conditions for obtaining maximum TPC and AA.

This work investigates olive pomace from olive mill factories as an adsorbent for the removal of total phenols from olive mill effluent (OME). This pathway of valorization of olive pomace reduces the environmental impact of OME while providing a sustainable and cost-effective wastewater treatment approach for the olive oil industry. Olive pomace was pretreated with water washing, drying (60 °C) and sieving (−1 for OPR and 66.67 mg·g−1 for OPB, respectively. Thermodynamic simulations indicated spontaneous and exothermic reaction. The rates of total phenol removal were within the range of 10–90% following 24 h batch adsorption in OME diluted at 100 mg/L total phenols, with the highest removal rates observed at pH = 10. Furthermore, solvent regeneration with 70% ethanol solution yielded partial regeneration of OPR at 14% and of OPB at 45% following the adsorption, implying a significant rate of recovery of phenols in the solvent. The results of this study suggest that adsorbents derived from olive pomace may be used as economical materials for the treatment and potential capture of total phenols from OME, also suggesting potential further applications for pollutants in industrial wastewaters, which can have significant implications in the field of environmental technologies.

The slow pyrolysis characteristics of lignocellulosic biomass and its three major components via a Thermogravimetric Analyzer coupled with a Fourier Transform Infrared Spectrometer (TGA-FTIR) was studied. Different compositions and ratios of cellulose, hemicellulose, and lignin, olive pomace, sunflower waste, and pinecone were selected. The main decomposition temperature ranges of xylose (hemicellulose) and lignin showed a broad range between 173–690 and 170–835 °C, respectively, whereas that of cellulose was detected to be 291–395 °C. All biomass samples presented a three-stage pyrolysis model that is explained by the superposition of the weight losses of major components. Simultaneous FTIR analysis of the evolved gases demonstrated that the greater the cellulose and hemicellulose contents, the higher the CO and CO2 concentrations. Chemical kinetics were computed with the Coats–Redfern model. The activation energy required for the initiation of the thermal decomposition of biomass samples is in the range of 53–94 kJ/mol. Moreover, the product yields of all samples were determined via laboratory-scale pyrolysis. Pyrolytic oil and char yields were determined to be between 18.9–32.4 wt.% and 26.6–31.2 wt.%, respectively, at 550 °C final temperature for the biomass samples. It is concluded that the bio-oil yield was not only controlled by the cellulose content but also affected by the presence of n-hexane soluble (oil) fraction as well as inorganics.

Cosmetic interest in agro-industrial byproducts is growing. In fact, many studies have shown that these residues present bioactive compounds with several skincare applications. One example is olive byproducts, such as olive pomace, which has a composition rich in phenolic compounds. As the production of olive oil is increasing, the amount of byproducts being generated is escalating, with significant constraints in their safe disposal due to their phytotoxic nature. The present study aimed to, from a zero-waste perspective, characterize and add value to a sub-byproduct, a semi-solid paste (SSP) derived from a patent process of olive pomace extraction. The chemical analysis of this residue revealed high moisture and significant protein, fat, and ash contents. Furthermore, vitamin E total phenolics and flavonoid content were assessed, as well as antioxidant activity, using DPPH• (2,2-diphenyl-1-picrylhydrazyl radical) and FRAP (ferric reducing antioxidant power) methods. Based on this primary assessment, a facial mask with antioxidant properties was developed. Rheological analysis showed that the developed mask presented shear thinning behavior, thixotropy, and texture characteristics desirable for skincare use. The results of this study showed the successful incorporation of SSP into facial masks and provides a preliminary assessment of this byproduct’s impact on the appearance and performance of these formulations.

Olive pomace is a by-product from olive oil production that can be further processed to obtain olive pomace paste. In this work, the influence of different time/temperature binomials (65 °C/30 min; 77 °C/1 min; 88 °C/15 s; and 120 °C/20 min) on the nutritional quality, chemical composition, and efficiency on control/elimination of natural microbial load of olive pomace paste was ascertained. The treatments significantly impacted the contents of ash, fat, vitamin E, phenolics (including hydroxytyrosol), flavonoids, and antioxidant activity, but not the fatty acids profile. The binomial 88 °C/15 s showed the greatest potential since it better preserved the phytochemical and antioxidant properties as well as the protein and fiber contents. This binomial is also faster and easy to be implemented at an industrial level, allowing the obtention of a safe functional ingredient to satisfy consumers’ demands for novel sustainable products, simultaneously, responding to food safety and food security concerns.

Olive pomace (OP) represents one of the main by-products of olive oil production, which still contains high quantities of health-promoting bioactive compounds. In the present study, three batches of sun-dried OP were characterized for their profile in phenolic compounds (by HPLC-DAD) and in vitro antioxidant properties (ABTS, FRAP and DPPH assays) before (methanolic extracts) and after (aqueous extracts) their simulated in vitro digestion and dialysis. Phenolic profiles, and, accordingly, the antioxidant activities, showed significant differences among the three OP batches, and most compounds showed good bioaccessibility after simulated digestion. Based on these preliminary screenings, the best OP aqueous extract (OP-W) was further characterized for its peptide composition and subdivided into seven fractions (OP-F). The most promising OP-F (characterized for its metabolome) and OP-W samples were then assessed for their potential anti-inflammatory properties in ex vivo human peripheral mononuclear cells (PBMCs) triggered or not with lipopolysaccharide (LPS). The levels of 16 pro-and anti-inflammatory cytokines were measured in PBMC culture media by multiplex ELISA assay, whereas the gene expressions of interleukin-6 (IL-6), IL-10 and TNF-α were measured by real time RT-qPCR. Interestingly, OP-W and PO-F samples had a similar effect in reducing the expressions of IL-6 and TNF-α, but only OP-W was able to reduce the release of these inflammatory mediators, suggesting that the anti-inflammatory activity of OP-W is different from that of OP-F.

In Greece biomass is often being disposed of uncontrollably, resulting in significant environmental impacts. The aim of this study is the single-stage anaerobic co-digestion assessment, valorizing Northern and Southern Greece mixtures, resulting from previous literature reviews, experimental designs, and biochemical methane potential (BMP) assays. Regarding the methane yield maximization, in Northern Greece, the most suitable mixture was 10% corn silage, 80% cattle manure, and 10% malt; while in Southern Greece it was 10% corn silage, 57% cattle manure, 23% orange peels, and 10% olive pomace for fall/winter season. The hydraulic retention time (HRT) was set at 20 d and an initial organic loading rate (OLR) of 2 g COD/(L·d) was applied, with a view to gradually increase it. However, volatile fatty acids accumulation was observed, which led to OLR reduction to 1.5 g COD/(L·d) for both experiments. The Northern Greece reactor operated successfully for OLR 1.5–5 g COD/(L·d), while further increase led to system failure. On the other hand, the reactor of the Southern Greece mixture operated successfully at OLR 1.5–2 g COD/(L·d), but further operation indicated inadequacy, probably due to inhibitor (such as limonene) accumulation. Mixtures consisting of corn silage, cattle manure, and malt can be successfully valorized at high OLR. However, further investigation for mixtures with orange peels is suggested due to the presence of inhibitors.

Biochar’s agricultural and environmental benefits have been widely demonstrated; however, it may cause environmental contamination if it contains large amounts of pollutants such as polycyclic aromatic hydrocarbons (PAHs) and heavy metals (HMs). Therefore, this study aimed to assess the contents of PAHs and HM in a range of biochars generated from different sources and pyrolysis temperatures. A range of feedstock was converted to biochar, including sewage sludge (SS), olive mill pomace (OP), feather meal (FM), soft offal meal (CSM), chicken manure (CM), and date palm residues (DPR). Each feedstock was then pyrolyzed at three temperatures of 300, 500, or 700 °C, thereby producing a total of 18 types of biochar. These biochar products were analyzed for 16 PAHs and eight metals (Cr, Mn, Fe, Ni, Cu, Zn, Cd, and Pb). Benzo[b]fluoranthene, benzo[k]fluoranthene, and benzo(a)pyrene were significantly greater in the biochar produced at 700 °C than in that produced at 300 °C, especially for CM. The concentrations of dibenz(a,h)anthracene were significantly lower at 700 °C but greater at 500 °C and 300 °C in DPR. Increasing the pyrolysis temperature from 300 to 700 °C significantly increased the concentrations of metals, including Cr in SS and OP; Mn in CM; and Fe, Ni, Cu, and Zn in SS. However, the concentration of Cd was significantly lower in the SS when biochar was produced at 700 °C than at 500 or 300 °C. The type of feedstock used and the pyrolysis temperature are key factors influencing the contents of PAHs and HMs in biochar, both of which need to be considered during the production and use of biochar. Further investigations are recommended to establish the relationships between pyrolysis temperature and types of feedstock and the formation of PAH or the concentrations of metals. Monitoring the concentrations of PAHs and HMs before applying biochar to soil is also recommended.

Exhausted olive pomace (EOP) represents the principal residue of olive pomace. Several studies have optimized the extraction of specialized metabolites from the EOP of Olea europaea L., but a comparison between different extractive methods has not been made. For this reason, the present investigation aims to compare four different extractive methods by using water and 15% ethanol/water as extractive solvents. Specifically, based on extract antioxidant activity, the methods compared were maceration (MAC), microwave-assisted extraction (MAE), ultrasound-assisted extraction (UAE), and Accelerated Solvent Extraction (ASE). Between these, the UAE and ASE hydroalcoholic EOP extracts were demonstrated to have the highest antioxidant activity. Subsequently, these extracts were investigated for their hypoglycemic and antiradical activity using in vitro cell-free and cell-based assays, respectively. ASE hydroalcoholic EOP extract demonstrated the greatest ability to inhibit the α-amylase enzyme and an in vitro antioxidant activity comparable to N-acetyl cysteine in HepG2 cells. UAE and ASE extracts' phytochemical characterization was also performed, identifying seven phenolic compounds, including 3-hydroxytyrosol, tyrosol, and, for the first time, salidroside. The ASE hydroalcoholic EOP extract was the richest from a phytochemical point of view, thus confirming its major biological activity. Therefore, ASE and 15% ethanol/water may represent the best extractive method for EOP nutraceutical valorization.

Olive pomace is the main by-product generated by the olive oil production process. Although toxic to the environment, olive pomace is an important source of natural antioxidants due to its high content of phenolic compounds. The aim of the current study is to maximize the extraction yields of the main phenolic compounds present in olive pomace using innovative green technologies. For this purpose, the present work is divided into two parts. The first part is based on a solubility study of targeted phenolic compounds in various ethanol/water ratios at two different temperatures (20 °C and 50 °C). A computational prediction using COSMO-RS software was applied for the calculation of eventual solubility, which was subsequently confirmed by practical experiments. The determination of the optimal extraction conditions of solvent ratio (EtOH/H2O) (60:40 v/v) and temperature (50 °C) led to the second part of the work, which concerns the intensification of extraction yields. Furthermore, various green extractions using innovative technologies, including accelerated solvent extraction (ASE), ultrasound with its both system (probe (UAE-P) and bath (UAE-B)), bead milling (BM) and microwave (MAE), were carried out and then compared to conventional maceration (CM). Results showed that ASE was the most effective method for extracting phenolic compounds from dried olive pomace powder (5.3 milligrams of tyrosol equivalent (TE) per gram of dried olive pomace powder (DOP)) compared to CM (3.8 mg TE/g DOP).

This study presents the effect of hydrolysis on the antioxidant activity of olive mill waste. The olive pomace samples were collected at different stages of maturity and were investigated for their phenolic content and antioxidant activity. Three different extraction procedures were employed, including methanolic maceration extraction and two hydrolysed procedures using 6 M HCL for acid hydrolysis and 10 M NaOH for alkaline hydrolysis. The total phenolic, flavonoid and ortho-diphenolic content, metal ion reducing activity, 2,2′-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) and 2,2-Diphenyl-1-picrylhydrazyl Radical Scavenging, hydrogen peroxide and superoxide scavenging activity assays were determined for the different extracts. In this study, cultivar and maturation of olives was one of the factors that affected the phenolic content in the olive pomace samples. Results show that alkaline hydrolysis had the highest antioxidant activity with respect to total phenolic content, 2,2-Diphenyl-1-picrylhydrazyl scavenging activity, metal ion reducing activity and superoxide scavenging activity, whereas acid hydrolysis had the highest 2,2′-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) scavenging activity. The correlation analysis carried out on the different phenolic classes revealed that the total phenolic, flavonoid and ortho-diphenolic content were correlated with metal ion reducing activity and Radical Scavenging activity.

Torrefaction is a promising pretreatment technology for valorizing biomass and upgrading pyrolysis products. This study sets out an original procedure consisting of subjecting the biomass to torrefaction before fast pyrolysis to increased value-added compounds based on agricultural waste biomasses production. This study uses a combined biomass treatment consisting of torrefaction (280–320 °C) and subsequent fast pyrolysis (500 °C) using the same reactor. Under different torrefaction temperatures and residence times, olive pomace (OP) and almond shell (AS) have been evaluated. The study demonstrated OP rather than AS was thermally unstable. The highest total yield of carboxylic acids (mainly acetic acid) was obtained by means of torrefaction at 280 °C with a residence time of 20 s for OP, and at 300 °C and 20 s for AS. Higher torrefaction temperature and residence time promoted phenolic compounds production for OP. However, OP had a higher lignin content and inherent metals that promoted a catalytic reaction during the procedure. The highest yield (47.7%) was obtained using torrefaction at 320 °C with a residence time of 240 s. Overall, the torrefaction of biomass combined with fast pyrolysis constituted a very simple and efficient strategy for valorizing the conversion of agricultural waste biomass into value-added chemicals.

Despite its severe toxicity and negative environmental impact, hexane remain the solvent of choice for the extraction of vegetable oils. This is in contrast with the constantly growing demand for sustainable and green extraction processes. In recent years a variety of alternatives to hexane have been reported, among them 2-methyloxolane (2-MeOx), which has emerged as a promising bio-based alternative. This study evaluates the possibility of replacing hexane, in the extraction of olive pomace (OP), with 2-MeOx, both dry and saturated with water (4.5%), the latter of which is called 2-MeOx 95.5%. The three solvents have been compared in terms of extraction yield and quality, as well as the lipid and polyphenol profiles of the extracts. The work concluded that both dry 2-MeOx and 2-MeOx 95.5% can replace hexane in OP extraction, resulting in higher yields and extracts richer in phenolic compounds. This study should open the road to further semi-industrial scale investigations toward more sustainable production processes.

Olive pomace is an agro-industrial waste product generated from the olive oil industry and constituted by bioactive compounds with potential applications in several industrial sectors. The purpose of this work was to evaluate the effects of electron beam (e-beam) radiation on olive pomace, specifically on phenolic compounds (by HPLC-DAD-ESI/MS) and the bioactive properties (antioxidant, antiproliferative, and antimicrobial activities) of crude olive pomace (COP) and extracted olive pomace (EOP) extracts. The amount of total flavonoid content and the reducing power of COP extracts were higher than those obtained for EOP extracts. The results suggested that e-beam radiation at 6 kGy increased both total phenolic and total flavonoid contents as well as the reducing power of COP extracts, due to the higher extractability (>2.5-fold) of phenolic compounds from these samples, while decreasing the scavenging activity of extracts. The extracts of both olive pomaces showed antibacterial potential, and COP extracts at 400 µg/mL also presented antiproliferative activity against A549, Caco-2, 293T, and RAW264.7 cell lines, with both properties preserved with the e-beam treatment. All in all, e-beam radiation at 6 kGy appears to be a promising technology to valorize the pollutant wastes of the olive oil industry through enhancing phenolic extractability and bioactive properties, and, furthermore, to contribute to the environmental and economical sustainability of the olive oil industry.

This study explores the bioactive potential of olive mill waste derived from cultivars grown in the Maltese Islands through various analytical approaches. Cell culture, cell staining, allelopathic assays, shrimp brine lethality assays, and HPLC analysis were conducted to assess the efficacy and bioactivity of the extracts using different treatments, including methanolic extraction, acid, and alkaline hydrolysis. Notably, the results from cell lines revealed that NB4r2 cells exhibited high susceptibility to the tested extracts, with the lowest IC 50 recorded after 72 h of exposure. Notably, the 'Bajda' cultivar displayed the most effectiveness, particularly with acid hydrolysis. In allelopathic assays, higher concentrations of 'Malti', 'Bidni', and 'Bajda' extracts significantly inhibited lettuce seed germination. Similarly, in the brine shrimp lethality assay, higher concentrations led to increased mortality rates of Artemia salina , though rates decreased at lower concentrations. The identification of phenolic compounds found in olive mill waste was conducted using high-performance liquid chromatography (HPLC) with the use of internal standards. The identification revealed a variety of compounds, with 3-hydroxytyrosol and oleacein being present in high abundance in nearly all hydrolyzed and methanolic extracts, whereas gallic acid was found to be the least abundant. These findings highlight the rich bioactive potential of olive mill waste and provide insights into its applications in pharmaceuticals, nutraceuticals, and agriculture, emphasizing the importance of further research to fully exploit these valuable resources.

Olive pomace (OP) is a valuable food byproduct that contains natural phenolic compounds with health benefits related to their antioxidant activities. Few investigations have been conducted on OP from the United States while many studies on European OP have been reported. OP of Arbequina, the most common cultivar from California, was collected and extracted by water, 70% methanol and 70% ethanol, followed by purification using macroporous absorbing resin. Results showed that the extractable total phenolic content (TPC) was 36–43 mg gallic acid equivalents (GAE)/g in pitted, drum-dried defatted olive pomace (DOP), with major contributions from hydroxytyrosol, oleuropein, rutin, verbascoside, 4-hydroxyphenyl acetic acid, hydroxytyrosol-glucoside and tyrosol-glucoside. Macroporous resin purification increased TPC by 4.6 times the ethanol crude extracts of DOP, while removing 37.33% total sugar. The antioxidant activities increased 3.7 times Trolox equivalents (TrE) by DPPH and 4.7 times TrE by ferric reducing antioxidant power (FRAP) in the resin purified extracts compared to the ethanol crude extracts. This study provided a new understanding of the extraction of the bioactive compounds from OP which could lead to practical applications as natural antioxidants, preservatives and antimicrobials in clean-label foods in the US.

This work analyzes the heat transfer and fluid flow within a batch reactor for hydrothermal carbonization (HTC) of raw olive pomace (ROP). The autoclave is partially filled with a mixture of ROP and distilled water and hence it is considered as a dispersed medium. The reactor is heated through its lateral surface, whereas the bottom wall and the upper surface of the mixture are thermally insulated. Under the effect of heat and pressure, the fluid moves inside the reactor, while particles are subject to other forces. Additionally, the biomass (ROP) is decomposed into very fine particles to produce a solid product (hydrochar). COMSOL Multiphysics software is used for the analysis of heat transfer and fluid dynamics. Chemical kinetics of the reactions are modeled by a basic kinetics model. Numerical results are validated using experimental data carried out in similar operating conditions. They are in good agreement since the deviation between them does not exceed 6%. Isotherms, velocity fields, and isobars are evaluated within the reactor as well as velocity and distribution of particles. These amounts are influenced by the imposed heat flux at the lateral wall (q0). Also, it has been shown that the temperature and pressure values reached are above those required by the HTC process and, consequently, a HTC reactor could be designed with optimal operating conditions.

Phenolic and triterpenoid compounds of the olive tree are recognized as having a key role in health promotion, thanks to their multiple protective actions in humans. To expand the source of these bioactive compounds, the phenolic and triterpenoid profiles of leaf, branch, destoned fruit, destoned pomace, shell, seed, and extra virgin olive oil from the Frantoio, Leccino, and Moraiolo olive cultivars were simultaneously characterized by HPLC-DAD-MS. Overall, 43 molecules were quantitated and expressed on the obtained dry extracts. Oleuropein was mainly concentrated in branches (82.72 g/kg), fruits (55.79 g/kg), leaves (36.71 g/kg), and shells (1.26 g/kg), verbascoside (4.88 g/kg) in pomace, and nüzhenide 11-methyl oleoside (90.91 g/kg) in seeds. Among triterpenoids, which were absent in shells, the highest amount of oleanolic acid was found in olive leaves (11.88 g/kg). HCT-116 colorectal cells were chosen to assess the cytotoxicity of the dry extract, using the phytocomplex from Frantoio, which was the richest in phenols and triterpenoids. The IC50 was also determined for 13 pure molecules (phenols and terpenoids) detected in the extracts. The greatest inhibition on the cell’s proliferation was induced by the branch dry extract (IC50 88.25 μg/mL) and by ursolic acid (IC50 24 μM). A dose-dependent relationship was observed for the tested extracts.

The disposal of olive wastes and their wastewater is a major problem worldwide. An important recycling chain can be formed through biogas production and energy conversion from olive waste. This study developed an efficient and effective sustainable model for biogas production using anaerobic digestion conditions with the co-digestion of pretreated olive waste. The sample used was hard olive pomace, which was dried in an oven before being crushed to fine particles with a mortar and pestle. The sample was analyzed by a CE-440 Elemental Analyzer, and Fourier Transform Infrared Spectrophotometer (FTIR) analysis was performed using Shimadzu IRTracer-100. Through the analysis, a substantial amount of electrical energy of 769 kWh/t was found to be generated per ton of olive pomace due to the high volatile solid (VS) percentage of organic waste material incorporated during the calculation. Reduced land area for landfilling olive waste was calculated to be 108 m2 per year, whereas the potential to reduce landfill leachate production was evaluated to be 0.32 m3 per year.

Nowadays, increasing interest in olive pomace (OP) valorization aims to improve olive’s industry sustainability. Interestingly, several studies propose a high-value application for OP extracts containing its main phenolic compounds, hydroxytyrosol and oleuropein, as therapy for ocular surface diseases. In this work, the stability and accessibility of OP total phenolic and flavonoid content, main representative compounds, and antioxidant activity were assessed under different pretreatment conditions. Among them, lyophilization and supercritical CO2 extraction were found to increase significantly most responses measured in the produced extracts. Two selected extracts (CONV and OPT3) were obtained by different techniques (conventional and pressurized liquid extraction); Their aqueous solutions were characterized by HPLC-DAD-MS/MS. Additionally, their safety and stability were evaluated according to EMA requirements towards their approval as ophthalmic products: their genotoxic effect on ocular surface cells and their 6-months storage stability at 4 different temperature/moisture conditions (CPMP/ICH/2736/99), together with pure hydroxytyrosol and oleuropein solutions. The concentration of hydroxytyrosol and oleuropein in pure or extract solutions was tracked, and possible degradation products were putatively identified by HPLC-DAD-MS/MS. Hydroxytyrosol and oleuropein had different stability as standard or extract solutions, with oleuropein also showing different degradation profile. All compounds/extracts were safe for ophthalmic use at the concentrations tested.

Olive pomace, an olive oil processing byproduct, can be upcycled and meet the current demand for natural and sustainable food ingredients. In this work, a patented process was used to obtain a functional ingredient from different olive pomaces. The nutritional, chemical and antioxidant profiles, as well as the antimicrobial activity against S. aureus, E. coli and C. albicans, were investigated for the first time. The amount of phenolics ranged between 3.1 and 3.8 g gallic acid eq./100 g in all samples and flavonoids between 2.0 and 3.2 g catechin eq/100 g. No significant differences were found regarding the antioxidant activity. The total fat varied between 5 and 11%, α-tocopherol being the major vitamer and oleic acid the main fatty acid. The protein and ash contents were 1–4% and 10–17%, respectively. The functional ingredient with a higher hydroxytyrosol content (220 mg/100 g) also presented the best minimal inhibitory concentration against the tested bacteria. No activity against C. albicans was verified. This new functional ingredient presents the potential to be used as a natural preservative or as a nutritional profile enhancer. Moreover, it can be an advantageous ingredient in food products, since it comprises specific lipid and hydrophilic bioactive compounds usually not present in other plant extracts.

Olive pomace, an environmentally detrimental residue generated during olive oil extraction, contains bioactive compounds in demand by the food industry. To valorize this waste product a suitable yield for the extraction process is required. Heat-assisted extraction of bioactive compounds from olive pomace was optimized by a circumscribed central composite design and response surface methodology. Our previous studies indicated that irradiation could improve 2.4-fold the extractability of the main phenolic compounds from olive pomace. The effect of extraction time, temperature and solvent concentration on the yield of polyphenols from irradiated olive pomace at 5 kGy was tested. Hydroxytyrosol-1-β-glucoside, hydroxytyrosol, tyrosol and caffeic acid were quantified by High Performance Liquid Chromatography to calculate the total polyphenol content. The optimal general conditions by RSM modeling were extraction time of 120 min, temperature of 85 °C, and 76% of ethanol in water. Using these selected conditions, 19.04 ± 1.50 mg/g dry weight, 148.88 ± 8.73 mg/g extract of total polyphenols were obtained, representing a yield of 13.7%, which was consistent with the value predicted by the model. This work demonstrated the potential of residues from the olive oil industry as a suitable alternative to obtain compounds that could be used as ingredients for the food industry.

At present the olive oil industry produces large amounts of secondary products once considered waste or by-products. In this paper, we present, for the first time, a new interesting olive by-product named “dried destoned virgin olive pomace” (DDVOP), produced by the pomace oil industry. The production of DDVOP is possible thanks to the use of a new system that differs from the traditional ones by having the dryer set at a lower temperature value, 350 °C instead of 550 °C, and by avoiding the solvent extraction phase. In order to evaluate if DDVOP may be suitable as a new innovative feeding integrator for animal feed, its chemical characteristics were investigated. Results demonstrated that DDVOP is a good source of raw protein and precious fiber; that it is consistent in total phenols (6156 mg/kg); rich in oleic (72.29%), linoleic (8.37%) acids and tocopherols (8.80 mg/kg). A feeding trial was, therefore, carried out on sheep with the scope of investigating the influence of the diet on the quality of milk obtained from sheep fed with DDVOP-enriched feed. The resulting milk was enriched in polyunsaturated (0.21%) and unsaturated (2.42%) fatty acids; and had increased levels of phenols (10.35 mg/kg) and tocopherols (1.03 mg/kg).

The aim of this study was to determine the potential use of rocket seed and chia seed gum as wall materials, to encapsulate and to prevent degradation of olive pomace extract (OPE) in polymeric nanoparticles, and to characterize olive pomace extract-loaded rocket seed gum nanoparticles (RSGNPs) and chia seed gum nanoparticles (CSGNPs). The phenolic profile of olive pomace extract and physicochemical properties of olive pomace, rocket seed gum (RSG), and chia seed gum (CSG) were determined. The characterization of the nanoparticles was performed using particle size and zeta potential measurement, differential scanning calorimeter (DSC), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), encapsulation efficiency (EE%), in vitro release, and antioxidant activity analyses. Nanoparticles were used to form oil in water Pickering emulsions and were evaluated by oxitest. The RSGNPs and CSGNPs showed spherical shape in irregular form, had an average size 318 ± 3.11 nm and 490 ± 8.67 nm, and zeta potential values of −22.6 ± 1.23 and −29.9 ± 2.57, 25 respectively. The encapsulation efficiency of the RSGNPs and CSGNPs were found to be 67.01 ± 4.29% and 82.86 ± 4.13%, respectively. The OPE-RSGNP and OPE-CSGNP presented peaks at the 1248 cm−1 and 1350 cm−1 which represented that C-O groups and deformation of OH, respectively, shifted compared to the OPE (1252.53 cm−1 and 1394.69 cm−1). The shift in wave numbers showed interactions of a phenolic compound of OPE within the RSG and CSG, respectively. In vitro release study showed that the encapsulation of OPE in RSGNPs and CSGNPs led to a delay of the OPE released in physiological pH. The total phenolic content and antioxidant capacity of RSGNPs and CSGNPs increased when the OPE-loaded RSGNPs and CSGNPs were formed. The encapsulation of OPE in RSGNPs and CSGNPs and the IP values of the oil in water Pickering emulsions containing OPE-RSGNPs and OPE-CSGNPs were higher than OPE, proving that OPE-loaded RSGNPs and CSGNPs significantly increased oxidative stability of Pickering emulsions. These results suggest that the RSG and CSG could have the potential to be utilized as wall materials for nanoencapsulation and prevent degradation of cold-pressed olive pomace phenolic extract.

Mediterranean countries are known for their high-quality olives and the production and consumption of olive oil. Olive pomace (OP), the major by-product of olive oil extraction, is receiving attention for its potential as a functional compound in food products, reflecting its physiology- and health-promoting attributes. This study assessed the physico-chemical characteristics of OP obtained from two Sardinian olive cultivars, Bosana and Semidana, and the effect of OP incorporation on the baking performance of wheat dough. We assessed the rheological parameters, pasting profile, and fermentation of doughs obtained through the partial substitution of wheat flour with OP at 0 (control), 1, 2, 3, and 5%. OP inclusion resulted in significant differences in the studied parameters compared with control samples. Positive effects included a decrease in development time, improved dough stability and storage, and superior loss modulus and gas retention capacity. Negative effects comprised an increase in dough resistance and a decrease in dough development height, gas production, gas retention, pasting profile, stickiness, and elasticity. These differences in the OP dough were due to the interactions between polyphenols and fibre with water and the starch-gluten matrix. This study found improvements in dough characteristics following the substitution of wheat flour with low percentages of OP, especially Semidana at 1%. Although higher percentages of OP would be associated with greater nutritional and health benefits, they resulted in a degradation of the dough's attributes, producing a gluten-free-like matrix in the final product.

Olive pomace results from the production of olive oil. Even if olive pomace represents a potential environmental problem, it contains phenolic compounds, which are widely recognized for their beneficial properties for human health. In this study, an innovative and sustainable technological approach to extract phenolic compounds from fresh olive pomace, based on food-grade solvent instead of those usually adopted, is investigated. Characterization and shelf-life evaluation of the hydroalcoholic extracts obtained from the procedure developed for different industrial purposes were also carried out. The phenolic fractions of the different samples were studied with the Folin-Ciocâlteu method to quantify that the total reducing molecules and HPLC-MS/MS analysis was used to define the profile through the identification and quantification of 42 compounds, belonging to five chemical families. Regarding shelf-life, the hydroalcoholic extract showed no significant reduction in phenolic content, for both instrumental evaluations, retaining most of the phenolic compounds present in the raw material; negative attributes were not perceived by sensory evaluation. Thus, these lab-scale results can be the starting point to develop a procedure that is suitable for a real olive mill, representing a valorization strategy in a circular economy and the perspective of new business models.

Platelet-activating factor (PAF), a proinflammatory lipid mediator, plays a crucial role in the formation of the atherosclerotic plaque. Therefore, the inhibition of endothelium inflammation by nutraceuticals, such as PAF inhibitors, is a promising alternative for preventing cardiovascular diseases. The aim of the present study was to evaluate the impact of a new functional yogurt enriched with PAF inhibitors of natural origin from olive oil by-products on PAF metabolism. Ninety-two apparently healthy, but mainly overweight volunteers (35–65 years) were randomly allocated into three groups by block-randomization. The activities of PAF’s biosynthetic and catabolic enzymes were measured, specifically two isoforms of acetyl-CoA:lyso-PAF acetyltransferase (LPCATs), cytidine 5′-diphospho-choline:1-alkyl-2-acetyl-sn-glycerol cholinephosphotransferase (PAF-CPT) and two isoforms of platelet activating factor acetylhydrolase in leucocytes (PAF-AH) and plasma (lipoprotein associated phospholipase-A2, LpPLA2). The intake of the enriched yogurt resulted in reduced PAF-CPT and LpPLA2 activities. No difference was observed in the activities of the two isoforms of lyso PAF-AT. In conclusion, intake of yogurt enriched in PAF inhibitors could favorably modulate PAF biosynthetic and catabolic pathways.

In recent years, a remarkable increase in olive oil consumption has occurred worldwide, favoured by its organoleptic properties and the growing awareness of its health benefits. Currently, olive oil production represents an important economic income for Mediterranean countries, where roughly 98% of the world production is located. Both the cultivation of olive trees and the production of industrial and table olive oil generate huge amounts of solid wastes and dark liquid effluents, including olive leaves and pomace and olive oil mill wastewaters. Besides representing an economic problem for producers, these by-products also pose serious environmental concerns, thus their partial reuse, like that of all agronomical production residues, represents a goal to pursue. This aspect is particularly important since the cited by-products are rich in bioactive compounds, which, once extracted, may represent ingredients with remarkable added value for food, cosmetic and nutraceutical industries. Indeed, they contain considerable amounts of valuable organic acids, carbohydrates, proteins, fibers, and above all, phenolic compounds, that are variably distributed among the different wastes, depending on the employed production process of olive oils and table olives and agronomical practices. Yet, extraction and recovery of bioactive components from selected by-products constitute a critical issue for their rational valorization and detailed identification and quantification are mandatory. The most used analytical methods adopted to identify and quantify bioactive compounds in olive oil by-products are based on the coupling between gas- (GC) or liquid chromatography (LC) and mass spectrometry (MS), with MS being the most useful and successful detection tool for providing structural information. Without derivatization, LC-MS with electrospray (ESI) or atmospheric pressure chemical (APCI) ionization sources has become one of the most relevant and versatile instrumental platforms for identifying phenolic bioactive compounds. In this review, the major LC-MS accomplishments reported in the literature over the last two decades to investigate olive oil processing by-products, specifically olive leaves and pomace and olive oil mill wastewaters, are described, focusing on phenolics and related compounds.

Investigations on the application of Life Cycle Assessment (LCA) to the construction sector have shown that the environmental impact of construction products can be significantly reduced. To achieve this, the use of best available techniques and eco-innovation in production plants must be promoted. In this way, the use of finite natural resources can be replaced by waste generated in other production processes, preferably available locally, stimulating the creation of more sustainable products. Conducting a comparative LCA study between the traditional ceramic brick manufacturing process and the ceramic brick manufacturing process incorporating ‘alperujo’ (waste generated in the virgin oil extraction process), is an inevitable step to achieve the integration of circularity and eco-innovation in the production system of traditional ceramic materials, through the CML(Centrum voor Milieukunde Leiden) and IPCC(The Intergovernmental Panel on Climate Change) methodology. The obtained results suggest that the environmental benefits in this practice are very limited, even taking into account the contribution of different amounts of this waste to the production of bricks.

Olive pomace, the solid by-product derived from olive oil production consists of a high concentration of bioactive compounds with antioxidant activity, such as phenolic compounds, and their recovery by applying innovative techniques is a great opportunity and challenge for the olive oil industry. This study aimed to point out a new approach for the integrated valorization of olive pomace by extracting the phenolic compounds and protecting them by encapsulation or incorporation in nanoemulsions. Innovative assisted extraction methods were evaluated such as microwave (MAE), homogenization (HAE), ultrasound (UAE), and high hydrostatic pressure (HHPAE) using various solvent systems including ethanol, methanol, and natural deep eutectic solvents (NADESs). The best extraction efficiency of phenolic compounds was achieved by using NADES as extraction solvent and in particular the mixture choline chloride-caffeic acid (CCA) and choline chloride-lactic acid (CLA); by HAE at 60 °C/12,000 rpm and UAE at 60 °C, the total phenolic content (TPC) of extracts was 34.08 mg gallic acid (GA)/g dw and 20.14 mg GA/g dw for CCA, and by MAE at 60 °C and HHPAE at 600 MPa/10 min, the TPC was 29.57 mg GA/g dw and 25.96 mg GA/g dw for CLA. HAE proved to be the best method for the extraction of phenolic compounds from olive pomace. Microencapsulation and nanoemulsion formulations were also reviewed for the protection of the phenolic compounds extracted from olive pomace. Both encapsulation techniques exhibited satisfactory results in terms of encapsulation stability. Thus, they can be proposed as an excellent technique to incorporate phenolic compounds into food products in order to enhance both their antioxidative stability and nutritional value.

Olive pomace is a semisolid by-product of olive oil production and represents a valuable source of functional phytocompounds. The valorization of agro-food chain by-products represents a key factor in reducing production costs, providing benefits related to their reuse. On this ground, we herein investigate extraction methods with supercritical carbon dioxide (SC-CO2) of functional phytocompounds from olive pomace samples subjected to two different drying methods, i.e., freeze drying and hot-air drying. Olive pomace was produced using the two most common industrial olive oil production processes, one based on the two-phase (2P) decanter and one based on the three-phase (3P) decanter. Our results show that freeze drying more efficiently preserves phytocompounds such as α-tocopherol, carotenoids, chlorophylls, and polyphenols, whereas hot-air drying does not compromise the β-sitosterol content and the extraction of squalene is not dependent on the drying method used. Moreover, higher amounts of α-tocopherol and polyphenols were extracted from 2P olive pomace, while β-sitosterol, chlorophylls, and carotenoids were more concentrated in 3P olive pomace. Finally, tocopherol and pigment/polyphenol fractions exerted antioxidant activity in vitro and in accelerated oxidative conditions. These results highlight the potential of olive pomace to be upcycled by extracting from it, with green methods, functional phytocompounds for reuse in food and pharmaceutical industries.

Background: olive pomace extract (OPE) is a rich source of health promoting polyphenols (hydroxytyrosol (HTS) and tyrosol (TS)) and can be used as a nutraceutical ingredient of dietary supplements and functional foods. Its adequate bioavailability is a prerequisite for excreting biological activity and can be significantly and specifically affected by different food matrices. Methods: in order to investigate food effects on polyphenol bioaccessibility, OPE was co-digested with different foods according to internationally harmonized in vitro digestibility method. Impact of particular nutrients on HTS and TS permeability was assessed on Caco-2 cell monolayer. Results: HTS and TS bioaccessibility and transepithelial permeability can be significantly affected by foods (nutrients), especially by casein and certain types of dietary fiber. Those effects are polyphenol-and nutrient-specific and are achieved either through complexation in gastrointestinal lumen and/or through direct effects of nutrients on intestinal monolayer. Conclusions: obtained results emphasize the significance and complexity of polyphenol interactions within the food matrix and the necessity of individual investigational approaches with respect to particular food/nutrient and interacting phenolic compounds.

In this study, the recovery of polyphenols from olive oil mill and winery waste was investigated. The performance of ultrasound assisted extraction (UAE), microwave assisted extraction (MAE), and pressurized liquid extraction (PLE) was assessed using ethanol–water mixtures, which are compatible with food, nutraceutical, and cosmetic applications. The extraction efficiency from olive pomace and lees samples was evaluated in terms of total polyphenol content (TPC), determined by high performance liquid chromatography (HPLC) and Folin–Ciocalteu assay. The effect of solvent composition, temperature, and time was analyzed by response surface methodology. Ethanol:water 50:50 (v/v) was found to be a suitable solvent mixture for both kinds of samples and all three extraction techniques. The performance of the extraction techniques was evaluated, under optimal experimental conditions, with a set of different representative samples of residues from olive oil and wine production. Overall, the best extraction efficiency for olive pomace residues was provided by MAE (ethanol:water 50:50 (v/v), 90 °C, 5 min), and for wine residues by PLE (ethanol:water 50:50 (v/v), 100 °C, 5 min, 1 cycle). However, the results provided by UAE (ethanol:water 50:50 (v/v), 30 min) were also suitable. Considering not only extraction performance, but also investment and operational costs, UAE is proposed for a future scaling up evaluation. Regarding olive pomace as a source for natural phenolic antioxidants, olive variety and climatic conditions should be taken into account, since both influence TPC in the extracts, while for winery residues, lees from red wines are more suitable than those from white wines.

A growing body of literature is available about the valorization of food by-products to produce functional foods that combine the basic nutritional impact with the improvement of the health status of consumers. In this context, this study had two main objectives: (i) An innovative multistep extraction process for the production of a refined olive oil enriched with phenolic compounds (PE-ROO) extracted from olive pomace, olive leaves, or grape marc was presented and discussed. (ii) The most promising PE-ROOs were selected and utilized in in vitro and in vivo trials in order to determine their effectiveness in the management of high fat diet-induced-metabolic syndrome and oxidative stress in rats. The best results were obtained when olive leaves were used as source of phenols, regardless of the chemical composition of the solvent utilized for the extraction. Furthermore, while ethanol/hexane mixture was confirmed as a good solvent for the extraction of phenols compounds soluble in oil, the mix ROO/ethanol also showed a good extracting power from olive leaves. Besides, the ROO enriched with phenols extracted from olive leaves revealed an interesting beneficial effect to counteract high fat diet-induced-metabolic disorder and oxidative stress in rats, closely followed by ROO enriched by utilizing grape marc.

Olive pomace management represents a great concern to the olive oil industry. This work focused on the development of a “zero waste” strategy for olive pomace based on a fractionation approach resulting in the obtention of different value-added fractions. The physicochemical composition of edible fractions obtained (liquid and pulp) was analysed. The potential use as a solid biofuel of the non-edible fraction (stones) was evaluated. High amounts of hydroxytyrosol (513.61–625.76 mg/100 g dry weight) were present in the liquid fraction. Pulp fraction was demonstrated to be a good source of fibre (53–59% dry weight) with considerable antioxidant activity both from free and bound phenolics. The stones fraction exhibited substantial high heating values (18.65–18.94 megajoule (MJ/kg). All these results support the added value of the olive pomace fractions combining the biofuel potential from the stones fraction and the functional food ingredients’ potential both from liquid and pulp fractions. The present methodology seems to be a feasible whole valorisation approach to achieve the circularity in the olive oil sector, prioritising obtaining high over low added-value products.