Search

In this article, we present a terahertz (THz) metamaterial absorber that blends two types of coordinated materials: Dirac semimetals and vanadium dioxide. Compared to other absorbers on the market, which are currently non-adjustable or have a single adjustment method, our absorber is superior because it has two coordinated modes with maximum adjustment ranges of 80.7% and 0.288 THz. The device contains four flawless absorption peaks (M1, M2, M3, and M4) spanning the frequency range of 2.0 THz to 6.0 THz, all with absorption rates greater than 99%. After calculation, the relative impedance of the device matches with that in free space, resulting in perfect absorption. In addition, our absorber has extremely excellent polarization insensitivity but is highly sensitive to changes in the environmental refractive index, with the highest environmental refractive index sensitivity of 716 GHz/RIU (gigahertz per refractive index unit). To sum up, the terahertz metamaterial absorber we showed has four perfect absorption peaks, high sensitivity, and stable polarization. This means it could be useful in areas like changing electromagnetic waves, making new sensors, and switching.

Acid fracturing is a crucial stimulation technique to enhance hydrocarbon recovery in carbonate reservoirs. However, the interaction between acid fractures and natural fractures remains complex due to the combined effects of mechanical, chemical, and fluid flow processes. This study extends a previously developed hydro-mechano-reactive flow coupled model to analyze these interactions, focusing on the influence of acid dissolution. The model incorporates reservoir heterogeneity and simulates various scenarios, including different stress differences, approaching angles, injection rates, and acid concentrations. Numerical simulations reveal distinct propagation modes for acid and hydraulic fractures, highlighting the significant influence of acid dissolution on fracture behavior. Results show that hydraulic fractures are more likely to cross natural fractures, whereas acid fractures tend to be arrested due to wormhole formation. Increasing stress differences and approaching angles promote fracture crossing, while lower angles favor diversion into natural fractures. Higher injection rates facilitate fracture crossing by increasing pressure accumulation, but excessive acid concentrations hinder fracture initiation due to enhanced wormhole formation. The study demonstrates the importance of tailoring fracturing treatments to specific reservoir conditions, optimizing parameters to enhance fracture propagation and reservoir stimulation. These findings contribute to a deeper understanding of fracture mechanics in heterogeneous reservoirs and offer practical implications for improving the efficiency of hydraulic fracturing operations in unconventional reservoirs.

In recent years, solar energy has become popular because of its clean and renewable properties. Meanwhile, two-dimensional materials have become a new favorite in scientific research due to their unique physicochemical properties. Among them, monolayer molybdenum disulfide (MoS2), as an outstanding representative of transition metal sulfides, is a hot research topic after graphene. Therefore, we have conducted an in-depth theoretical study and design simulation using the finite-difference method in time domain (FDTD) for a solar absorber based on the two-dimensional material MoS2. In this paper, a broadband solar absorber and thermal emitter based on a single layer of molybdenum disulfide is designed. It is shown that the broadband absorption of the absorber is mainly due to the propagating plasma resonance on the metal surface of the patterned layer and the localized surface plasma resonance excited in the adjacent patterned air cavity. The research results show that the designed structure boasts an exceptional broadband performance, achieving an ultra-wide spectral range spanning 2040 nm, with an overall absorption efficiency exceeding 90%. Notably, it maintains an average absorption rate of 94.61% across its spectrum, and in a narrow bandwidth centered at 303 nm, it demonstrates a near-unity absorption rate, surpassing 99%, underscoring its remarkable absorptive capabilities. The weighted average absorption rate of the whole wavelength range (280 nm–2500 nm) at AM1.5 is above 95.03%, and even at the extreme temperature of up to 1500 K, its heat radiation efficiency is high. Furthermore, the solar absorber in question exhibits polarization insensitivity, ensuring its performance is not influenced by the orientation of incident light. These advantages can enable our absorber to be widely used in solar thermal photovoltaics and other fields and provide new ideas for broadband absorbers based on two-dimensional materials.

This paper presents a photonic crystal fiber (PCF) sensor that can be used to measure the temperature and magnetic field simultaneously, and to monitor the changes in them in the environment. When we designed the fiber structure, two circular channels of the same size were added to the fiber to facilitate the subsequent addition of materials. A gold film is added to the upper channel (ch1), and the channel is filled with a magnetic fluid (MF). The sensor can reflect changes in the temperature and magnetic field strength. The two channels containing MF and PDMS in the proposed fiber are called ch1 and ch2. The structure, mode and properties (temperature and magnetic field) were analyzed and discussed using the finite element method. By using the control variable method, the influence of Ta2O5 or no Ta2O5, the Ta2O5 thickness, the diameter of the special air hole, the distance from the fiber core and the distance between them in the displacement of the loss spectrum and the phase-matching condition of the coupling mode were studied. The resulting maximum temperature sensitivity is 6.3 nm/°C (SPR peak 5), and the maximum magnetic field sensitivity is 40 nm/Oe (SPR peak 4). Because the sensor can respond to temperature and magnetic field changes in the environment, it can play an important role in special environmental monitoring, industrial production and other fields.

Perovskite solar cells (PSCs) still suffer from varying degrees of optical and electrical losses. To enhance the light decoupling and capture ability of Planar PSCs, an ultra-thin PSC structure with an Al2O3 pyramid anti-reflection layer (Al2O3 PARL) is proposed. The effect of the structure of the Al2O3 PARL on the photoelectric performance of PSCs was investigated by changing various parameters. Under the AM1.5 solar spectrum (300–800 nm), the average light absorption rates and quantum efficiency (QE) of PSCs containing pyramid-array textured rear layers (PARLs) were significantly higher than those of planar PSCs. The Al2O3 PARL-based PSCs achieved a light absorption rate of 96.05%. Additionally, electrical simulations were performed using the finite element method (FEM) to calculate the short-circuit current density (JSC), open-circuit voltage (VOC), and maximum power (Pmax). Based on the maximum value of the average light absorbance, the geometric structure of the Al2O3 pyramid PSCs was optimized, and the optimization results coincided with the JSC and QE results. The results of the electrical simulation indicated that the maximum JSC was 23.54 mA/cm2. Additionally, the JSC of the Al2O3 pyramid PSCs was 22.73% higher than that of planar PSCs, resulting in a photoelectric conversion efficiency (PCE) of 24.34%. As a result, the photoelectric conversion rate of the solar cells increased from 14.01% to 17.19%. These findings suggest that the presence of the Al2O3 PARL enhanced photon absorption, leading to an increase in electron–hole pairs and ultimately improving the photocurrent of the solar cells.

The main development direction for current solar technology is to improve absorption efficiency and stability. To bridge this gap, we design in this paper a structure consisting of two multilayer disc stacks of different radii, one topped by a TiO2 disc and the other by a cascade disc stack composed of SiO2-Ti, for use in thermal emitters and solar absorbers. The innovation of our work is the exploitation of multiple Fabry–Perot resonances in SiO2-Ti cascade optical cavities to develop absorber bandwidths while investigating it in the field of thermal emission and many aspects affecting the efficiency of the absorber. The finite difference time domain method (FDTD) results show absorption averages as high as 96.68% with an absorption bandwidth of 2445 nm (A > 90%) at 280 nm–3000 nm solar incidence and even higher weighted averages as high as 98.48% at 1.5 solar air mass (AM) illumination. In order to investigate the physical mechanisms of our designed absorber in a high absorption state, we analyzed the electric field distributions of its four absorption peaks and concluded that its high absorption is mainly caused by the coupling of multiple Fabry–Perot resonance modes in the cascaded optical cavity. While considering this high efficiency, we also investigated the effect of complex environments such as extreme high temperatures and changes in the angle of incidence of the absorber, and the results show that the thermal radiation efficiency of the emitter is 96.79% at an operating temperature of 1700 K, which is higher than its thermal radiation efficiency of 96.38% at an operating temperature of 1500 K, which is a perfect result. On the other hand, we conclude that the designed structure is independent of polarization, while the absorber still has 88.22% absorption at incidence angles of up to 60°, both in transverse electric (TE) and transverse magnetic (TM) modes. The results of this study can help improve the performance of future solar absorbers and expand their application areas.

Crown rot (CR) is a soil-borne disease of wheat in arid and semiarid areas of the world. The incidence rate and severity of CR are increasing with each passing year, which seriously threatens the safety of world wheat production. Here, 522 wheat varieties/lines representing genetic diversity were used to identify and evaluate the resistance source to CR disease. Six varieties, including Zimai 12, Xinong 509, Mazhamai, Sifangmai, and Dawson, were classified as resistant ® to CR. Seventy-nine varieties were classified as moderately resistant (MR) to CR, accounting for 15.13% of the tested varieties. The wheat 660 K SNP array was used to identify resistance loci by genome-wide association analysis (GWAS). A total of 33 SNPs, located on chromosomes 1A, 1B, 1D, 4A, and 4D, were significantly correlated with seedling resistance to CR in two years. Among them, one SNP on chromosome 1A and nine SNPs on chromosome 1B showed most significant resistance to disease, phenotypic variance explained (PVE) by these SNPs were more than 8.45%. Except that significant locus AX-110436287 and AX109621209 on chromosome 1B and AX-94692276 on 1D are close to the already reported QTL, other SNPs are newly discovered resistance loci. These results could lay a strong theoretical foundation for the genetic improvement and breeding for CR resistance in wheat.

Stress shadowing affects the simultaneous propagation of fractures from multiple perforation clusters. Employing uniform perforation parameters for all clusters cause the unbalanced growth of fractures, which arouses the demand of optimizing non-uniform perforation parameters. An optimization workflow combining a fracture propagation model and the particle swarm optimization method (PSO) is proposed for multi-cluster fracturing in this study. The fracture model considers the coupling of rock deformation and fluid flow along the wellbore and fractures, and it is solved by using the Newton iteration method. The optimization is performed by taking the variance of multiple fracture lengths as fitness value function in the frame of the PSO method. Numerical results show that using the same spacings and perforation parameters for all clusters is detrimental to the balanced growth of multiple fractures. The variance of fracture lengths drops greatly through optimization of cluster spacings and perforation number/diameter. Properly increasing the spacing and perforation number/diameter for the middle clusters promotes the balanced growth of multiple fractures. This study provides an efficient optimization workflow for multi-cluster fracturing treatment in horizontal wells.

Rock yielding may well take place during hydraulic fracturing in deep reservoirs. The prevailing models based on the linear elastic fracture mechanics (LEFM) are incapable of describing the evolution process of hydraulic fractures accurately. In this paper, a hydro-elasto-plastic model is proposed to investigate the hydraulic fracture propagation in deep reservoirs. The Drucker–Prager plasticity model, Darcy’s law, cubic law and cohesive zone model are employed to describe the plastic deformation, matrix flow, fracture flow and evolution of hydraulic fractures, respectively. Combining the embedded discrete fracture model (EDFM), extended finite element method (XFEM) and finite volume method, a hybrid numerical scheme is presented to carry out simulations. A dual-layer iterative procedure is developed based on the fixed-stress split method, Picard iterative method and Newton–Raphson iterative method. The iterative procedure is used to deal with the coupling between nonlinear deformation with fracture extension and fluid flow. The proposed model is verified against analytical solutions and other numerical simulation results. A series of numerical cases are performed to investigate the influences of rock plasticity, internal friction angle, dilatancy angle and permeability on hydraulic fracture propagation. Finally, the proposed model is extended to simulate multiple hydraulic fracture propagation. The result shows that plastic deformation can enhance the stress-shadowing effect.

In this study, a coupled thermo-hydro-mechanical model to simulate multiple hydraulic fracture propagation is presented. Fracture propagation with elastic deformation is described by using a displacement discontinuity method. The temperature distribution and induced thermal stress are calculated via a semi-analytical method in an explicit way. An iterative scheme is proposed to solve the coupling between fracture propagation with fluid flow and induced thermal stress. The numerical model is validated against related analytical solutions. Several numerical cases are modeled to investigate the controlling factors for uniform growth of multiple fractures. Results show that using non-uniform fracture spacings and proper increasing the spacing for fractures away from the heel of wellbore promote the uniform growth of multiple fractures by comparison with using uniform fracture spacings. Increasing the perforation diameter for the middle cluster also works. Besides, single-wing fracturing could greatly improve the uniform growth of multiple hydraulic fractures. Finally, it shows that the thermal stress has a significant influence on fracture geometrical size but has limited effect on fracture propagation path. In addition, the thermal effect promotes the uniform growth of multiple fractures.

Fluid-solid coupling is ubiquitous in the process of fluid flow underground and has a significant influence on the development of oil and gas reservoirs. To investigate these phenomena, the coupled mathematical model of solid deformation and fluid flow in fractured porous media is established. In this study, the discrete fracture model (DFM) is applied to capture fluid flow in the fractured porous media, which represents fractures explicitly and avoids calculating shape factor for cross flow. In addition, the extended finite element method (XFEM) is applied to capture solid deformation due to the discontinuity caused by fractures. More importantly, this model captures the change of fractures aperture during the simulation, and then adjusts fluid flow in the fractures. The final linear equation set is derived and solved for a 2D plane strain problem. Results show that the combination of discrete fracture model and extended finite element method is suited for simulating coupled deformation and fluid flow in fractured porous media.