Search

In this study, an upflow anaerobic packed-bed reactor (UAPB) produced biobutanol from the main byproduct of biodiesel plants, commonly known as glycerol. Currently, butanol production is mostly limited to pure cultures and sterilized feedstocks. Using glycerol wastes from biodiesel production demands a new paradigm because sterilization is not economically feasible for the elevated amount of glycerol generated by the biodiesel industry. Different microbial consortia were evaluated as inoculum sources to convert glycerol to butanol. In the first stage, operations were carried out with an average organic loading rate (OLR) of 13 g COD L−1 d−1. Kefir grains, sucrose auto-fermentation consortium, and heat-treated anaerobic sludge produced 16.7, 48.5, and 12.8 mg of butanol per gram of chemical oxygen demand (COD), respectively. Besides butanol production, a significant amount of ethanol (241.5 mg g−1 COD), acetate (30.3 mg g−1 COD), and butyrate (183.4 mg g−1 COD) were generated with glycerol processed by sucrose auto-fermentation consortium. In the second stage, the organic loading rates of 6.5, 13.0, and 26.0 g COD L−1 d−1 were applied to the UAPB reactor inoculated with sucrose auto-fermentation consortium. The OLR of 13.0 g COD L−1 d−1 yielded the highest production of butanol (41.5 mg g−1 COD) and generated other valuable co-products such as butyrate (246.1 mg g−1 COD), acetate (37.3 mg g−1 COD), and propionate (19.6 mg g−1 COD).

The aim of the present in vitro comparative study is to validate a novel composite polymer, named “ONLY”, developed to overcome the mechanical drawbacks of conventional, metal-reinforced poly(methyl methacrylate) (PMMA) interim restoration. Ten interim restorations were designed and fabricated (five in the composite “ONLY” group, and five in the metal-reinforced PMMA group). All the samples were screwed into the prototype models, simulating a complete edentulous mandible rehabilitated with six straight implants. Outcome measures were break point (load, N) and displacement (mm) through a static compression test, and material behavior through a dynamic cyclic test method (fatigue test). A total of 20 samples were tested (10 for static and 10 for dynamic). In each group, five samples (test and control) were used. All the specimens completed the mechanical tests, as planned. There was no statistically significant difference between groups for any test. In the test group, the break point was 1953.19 ± 543.73 N, while it was 2031.10 ± 716.68 N in the control group (p = 0.775). The displacement was 1.89 ± 0.34 mm in the test group and 1.98 ± 0.75 mm in the control group (p = 0.763). Using the dynamic cyclic test method, in the control group the mean load was 2504.60 ± 972.15 N, while in the test group the mean load was 3382.00 ± 578.50 N. The difference between groups was 877.40 ± 579.30 N (p value = 0.121). Within the limitations of this in vitro study, the novel composite polymer can be used to immediately load dental implants. Further clinical research is needed to confirm these preliminary results.

This report aims to clinically evaluate the feasibility of a novel biological-oriented digital impression method for teeth prepared with a vertical preparation technique. Something that makes this case unique is that the definitive impression is taken without cord displacement, reducing the invasiveness for the patient. In addition, dental technicians can reproduce the exact emergence profile of the temporary restoration used to reshape the soft tissue contours and define the accurate finish line at the established prosthetic junction, potentially avoiding the aesthetic and biological issues of the double-cord technique. The finish line and emergence profile are transferred using the temporary restoration through a simple CAD procedure performed using the same software used to take the impression. This makes the proposed biological-oriented digital impression technique (BODIT) easy to perform, avoiding adjunctive time and costs for clinicians and patients. Conclusions: Finally, patients' satisfaction could be significantly improved.

This paper investigates the threshold voltage shift (ΔVTH) induced by positive bias temperature instability (PBTI) in silicon carbide (SiC) power MOSFETs. By analyzing ΔVTH under various gate stress voltages (VGstress) at 150 °C, distinct mechanisms are revealed: (i) trapping in the interface and/or border pre-existing defects and (ii) the creation of oxide defects and/or trapping in spatially deeper oxide states with an activation energy of ~80 meV. Notably, the adoption of different characterization methods highlights the distinct roles of these mechanisms. Moreover, the study demonstrates consistent behavior in permanent ΔVTH degradation across VGstress levels using a power law model. Overall, these findings deepen the understanding of PBTI in SiC MOSFETs, providing insights for reliability optimization.

Obstructive sleep apneas (OSAs) and central sleep apneas (CSAs) are the most common comorbidities in Heart Failure (HF) that are strongly associated with all-cause mortality. Several therapeutic approaches have been used to treat CSA and OSA, but none have been shown to significantly improve HF prognosis. Our study evaluated the effects of a 3-months treatment with sodium-glucose cotransporter type 2 inhibitor (SGLT2i) on polygraphic parameters in patients with sleep apnea (SA) and HF, across the spectrum of ejection fraction, not treated with continuous positive air pressure (CPAP). A group of 514 consecutive elderly outpatients with HF, type 2 diabetes mellitus (T2DM) and SA, eligible for treatment with SGLT2i, were included in the investigation before starting any CPAP therapy. The two groups were compared with the t-test and Mann–Whitney test for unpaired data when appropriate. Then, a simple logistic regression model was built using 50% reduction in AHI as the dependent variable and other variables as covariates. A multivariate stepwise logistic regression model was constructed using the variables that linked with the dependent variable to calculate the odds ratio (OR) for the independent predictors associated with the reduction of 50% in AHI. The treated group experienced significant improvements in polygraphic parameters between baseline values and follow-up with reduction in AHI (28.4 ± 12.9 e/h vs. 15.2 ± 6.5 e/h; p < 0.0001), ODI (15.4 ± 3.3 e/h vs. 11.1 ± 2.6 e/h; p < 0.0001), and TC90 (14.1 ± 4.2% vs. 8.2 ± 2.0%; p < 0.0001), while mean SpO2 improved (91. 3 ± 2.3 vs. 93.8 ± 2.5); p < 0.0001. These benefits were not seen in the untreated population. The use of SGLT2i in patients suffering from HF and mixed-type SA not on CPAP therapy significantly contributes to improving polygraphic parameters.

Temporal lobe epilepsy (TLE) represents the most common form of refractory focal epilepsy. The identification of innovative clinical biomarkers capable of categorizing patients with TLE, allowing for improved treatment and outcomes, still represents an unmet need. Circulating microRNAs (c-miRNAs) are short non-coding RNAs detectable in body fluids, which play crucial roles in the regulation of gene expression. Their characteristics, including extracellular stability, detectability through non-invasive methods, and responsiveness to pathological changes and/or therapeutic interventions, make them promising candidate biomarkers in various disease settings. Recent research has investigated c-miRNAs in various bodily fluids, including serum, plasma, and cerebrospinal fluid, of TLE patients. Despite some discrepancies in methodologies, cohort composition, and normalization strategies, a common dysregulated signature of c-miRNAs has emerged across different studies, providing the basis for using c-miRNAs as novel biomarkers for TLE patient management.

Aim: The aim of this in vitro study is to present a debonding protocol developed to remove a screw-retained, monolithic, zirconia restoration from its titanium-base abutment, and to microscopically evaluate the abutment integrity at both the prosthetic and connection levels. Materials and Methods: A total of 30 samples were tested. Each sample consisted of a monolithic zirconia restoration bonded on a titanium link abutment. Five different shapes were designed and fabricated. Randomly, one-third of the Ti-link abutments were subjected to an anodizing process. Then, all the zirconia samples were bonded to the Ti-link abutments according to a pre-established protocol. Forty-eight hours later, the samples were debonded according to the experimental protocol. The outcomes were evaluated by a visual inspection with an optical microscope, scanning electron microscopy (SEM), and chemical composition analysis. Results: Thirty samples were collected and visually analyzed. Seven samples were randomly evaluated via scanning electron microscopy. In all the examinations, no relevant changes were reported. Chemical composition analysis also relieved no changes in the chemical structure of the titanium. Conclusions: The titanium-base abutments do not alter the structure and properties of the material, not creating phase changes or the birth of oxides such as to induce fragility. Further clinical studies with longer follow-up periods are needed to confirm these preliminary results.

Fully digital workflow in implant dentistry is ever increasing. Treatment of partial edentulous cases is well-documented; nevertheless, complete edentulous cases are still a challenge. To present several innovations in the treatment of complete edentulous patients using digital solutions, both for implant placement and restoration delivery, was the objective of this study. It was designed as a retrospective case series study, aimed to tune further research with larger sample size, and a longer follow-up. Patients requiring complete, implant-supported restoration were asked to participate in this study. Enrolled patients were treated with four implants, immediate loading and a definitive complete arch restoration. Patients were treated using computer-assisted, template-based surgery. Multi-piece surgical templates were used to accurately place the implants, to manage the bone if needed and to make immediate loading procedure quicker and easier. After osseointegration period, definitive, extra-oral, digital impressions were taken using newly developed scan analogs, connected in the patient mouth using temporary cylinders and stabilized by means of the low-shrinkage, flowable, resin composite. Outcomes were implant and prosthesis survival rate, complications, accuracy, and patient satisfaction. Radiographic evaluation performed with a preliminary, radiopaque aluminum try-in, was used to test the accuracy of the digital impressions. Overall, 20 implants were placed in five patients. All the implants osseointegrated without complications. One impression was taken a second time due to inaccuracy of the aluminum tray-in. Finally, all of the patients were completely satisfied with both surgical and prosthetic procedures. Within the limitations of this case series, multi-piece surgical templates showed promising results improving the clinician’s confidence in the case of bone reduction, post-extractive implants and immediate loading. The prosthetic template increased the trueness of the digital impression for complete edentulous patients. Finally, even if an impression was performed again, the scan-analog used for extra-oral chair-side digital impressions seemed to be a promising tool. Continuous improvements and further study are needed to confirm these preliminary results.

Chronic urticaria (CU) is one of the most common skin disorders worldwide. Among the inducible subgroup of CU, cold urticaria (ColdU) can affect both children and adults and is the only type associated with the risk of anaphylaxis without cofactors. In the scientific literature, data about cold anaphylaxis (ColdA) are poor, especially at pediatric age, and little is known about risk factors associated with the onset of systemic reactions and about the criteria for prescribing adrenaline auto-injectors (AAIs) in these patients. We describe the clinical characteristics and management of a case series of 21 patients with a history of ColdA, and we compare them with the pediatric case reports and case series published so far. On the basis of the scientific literature and of our case series of patients, we suggest that AAI should be prescribed to all high-risk patients: those with urticaria caused by cold-water immersion, oropharyngeal reactions, and with a previous history of systemic symptoms or anaphylaxis.

This study evaluated the prophylactic effect of localized biomimetic minocycline and systemic amoxicillin on immediate implant placement at infected extraction sites. Twelve mongrels with six implants each were randomly assigned to five groups: uninfected negative control (Group N); infected with oral complex bacteria (Group P); infected and treated with amoxicillin one hour before implant placement (Group A); infected and treated with minocycline during implant placement (Group B); and infected and treated with amoxicillin one hour before implant placement and with minocycline during implant placement (Group C). Radiographic bone level, gingival index (GI), probing depth (PD), papillary bleeding index (PBI), and removal torque (RT) were recorded. There was no significant difference between Groups A, B, and C for bone loss. Group A showed the highest RT, the lowest PBI, and significantly lower GI and PD values than Group P. Group B exhibited significantly higher RT value than Group N and significantly smaller PD value than Group P at 6 w postoperatively. Localized minocycline could improve implant success by reducing bone loss and increasing RT and systemic amoxicillin could maintain the stability of the peri-implant soft tissue. However, combined use of these two antibiotics did not augment the prophylactic effect.

Numerous types of prosthodontics surgical guides, with and without metallic sleeves, have been found to be useful in clinical studies. The aim of this in vitro research was to compare the time required to complete the surgical procedure with two differently designed surgical prosthetic templates. Ten identical prototype models of mandible based on a CBCT and optical scan of a partially edentulous patient with missing teeth numbers 37, 46, and 47 were prepared and then printed. Five of these models were used for implant site preparation with a surgical guide without metal sleeves and dedicated surgical kit, and the other five models were used for the same procedure performed with a surgical guide with metal sleeves and a dedicated surgical kit. The time of implant site preparation was measured and recorded. Statistical analysis was performed using Student’s t-test for independent samples. Differences between groups were found to be statistically significant (t = −9.94; df = 28; p = 0.0000) with a lower value in favor of the surgical templates without metallic sleeves. Different types of prosthodontics surgical guides, with or without metallic sleeves, seemed to be an important factor which can significantly impact the time of implant site preparation and, therefore, the overall surgical procedure.

Background: Riluzole (RLZ) has demonstrated neuroprotective effects in several neurological disorders. These neuroprotective effects seem to be mainly due to its ability to inhibit the excitatory glutamatergic neurotransmission, acting on different targets located both at the presynaptic and postsynaptic levels. Methods: In the present study, we evaluated the effects of Riluzole (RLZ) against limbic seizures, induced by AMPA, kainate, and NMDA receptor agonists in Sprague–Dawley rats, and in a well-validated genetic model of absence epilepsy, the WAG/Rij rat. Furthermore, in this latter model, we also studied the effect of RLZ in co-administration with the competitive NMDA receptor antagonist, CPP, or the non-competitive AMPA receptor antagonist, THIQ-10c, on spike-wave discharges (SWDs) in WAG/Rij rats, to understand the potential involvement of AMPA and NMDA receptors in the anti-absence effect of RLZ. Results: In Sprague–Dawley rats, RLZ pretreatment significantly reduced the limbic seizure severity induced by glutamatergic agonists, suggesting an antagonism of RLZ mainly on NMDA rather than non-NMDA receptors. RLZ also reduced SWD parameters in WAG/Rij rats. Interestingly, the co-administration of RLZ with CPP did not increase the anti-absence activity of RLZ in this model, advocating a competitive effect on the NMDA receptor. In contrast, the co-administration of RLZ with THIQ-10c induced an additive effect against absence seizure in WAG/Rij rats. Conclusions: these results suggest that the antiepileptic effects of RLZ, in both seizure models, can be mainly due to the antagonism of the NMDA glutamatergic receptors.

Implants fracture is a rare but possible complication that leads to implants failure after prostheses delivery. Mechanical properties play a key role in the failure of dental implant systems. The aim of this narrative review was to evaluate the existing evidence in identifying etiology risk factors for implants fracture. The focused question was to evaluate whether there was any possible factors influencing the fracture of dental implants. A literature search of papers written in English, published from 1967 to July 2021, and reporting incidence of implants fracture in human with at least 15 participants (and one year of follow-up) was conducted using PubMed database including MeSH and free text terms and filters. Selected manuscripts were analyzed and discussed. The outcomes were the incidence of implants failure due to a fracture and the associated risk factors. A total of 96 articles were initially selected, but only eight articles were included according to the search criteria (two systematic reviews and six retrospective evaluation). Incidence of implants fracture ranged from 0.2 to 2.3%, with a mean value of 0.52%. Poor implant planning, including implant design and diameter, and occlusal overloading, were the most common variables associated with implants fracture. Implant removal is the only possible treatment and hence prevention, including stability of the marginal bone loss, is mandatory.

Dental implants represent the gold standard for the treatment of single edentulism, even in anterior areas. Today, the basic criteria for implant success has changed from mobility, pain, radiolucency, and peri-implant bone loss (>1.5 mm) to prosthetic level success, aesthetics, soft tissue parameters, as well as patient satisfaction. This case report documents a combination of surgical and prosthetic procedures for the treatment of gingival recessions in the anterior maxilla, appearing after tooth extraction, socket preservation, and staged guided implant placement. Prosthetic management of the temporary restoration, orthodontic treatment, and a connective tissue graft were performed. The decision-making process and step-by-step execution of the treatments are presented to describe the entire clinical and surgical management of the reported case. Finally, good aesthetic outcomes, patient satisfaction, and recovery of the soft tissue recession were observed with the combination of these techniques.

Purpose: To evaluate preliminary data on survival and success rates of immediately loaded, screw-retained, restorations delivered on lower arches using narrow and low-profile OT Equator abutments. Methods: This retrospective study analyzed data of patients rehabilitated with OT Bridge (fixed prosthetic system built on OT Equator) prosthetic concept from November 2017 to February 2019 in five different centers. Outcome measures were implant and prosthetic survival rates, biological and technical complications, marginal bone loss (MBL), oral health impact profile (OHIP), bleeding on probing, and plaque index. Results: A total of 60 implants were inserted in 12 patients. Patients were followed for a mean period of 15.8 months (range 12–24). All the patients received OT Equator as intermediate abutments. Four out of 60 implants were connected to the prosthetic framework using only the Seeger system, without a screw. One year after loading, three implants failed (implant survival rate of 95.0%) in two patients. No prosthesis failed and no major biological and technical complications were experienced. One year after initial loading, the marginal bone level was 0.32 ± 0.2 mm. The OHIP before treatment was 87.7 ± 6.0. One year after treatment, OHIP was 23.6 ± 1.2. The difference was statistically significant (64.1 ± 7.2; p = 0.0000). One year after loading, 8.9% of the examined implant sites present positive bleeding on probing, while 5.8% of the implant sites presented plaque. Conclusions: The OT Equator abutments showed successful results when used to support mandible fixed dental prosthesis delivered on 4–6 implants. Whole prosthetic survival and success rates, high patient satisfaction, and good biological parameters were experienced one year after function. Further prospective studies are needed to confirm these preliminary results.

Non-small cell lung cancer (NSCLC) is one of the deadliest diseases worldwide and represents an impending burden on the healthcare system. Despite increasing attention, the mechanisms underlying tumorigenesis in cancer-related diseases such as COPD remain unclear, making novel biomarkers necessary to improve lung cancer early diagnosis. MicroRNAs (miRNAs) are short non-coding RNA that interfere with several pathways and can act as oncogenes or tumor suppressors. This study aimed to compare miRNA lung expression between subjects with NSCLC and COPD and healthy controls to obtain the miRNA expression profile by analyzing shared pathways. Lung specimens were collected from a prospective cohort of 21 sex-matched subjects to determine the tissue miRNA expression of hsa-miR-34a-5p, 33a-5p, 149-3p, 197-3p, 199-5p, and 320a-3p by RT-PCR. In addition, an in silico prediction of miRNA target genes linked to cancer was performed. We found a specific trend for has-miR-149-3p, 197-3p, and 34a-5p in NSCLC, suggesting their possible role as an index of the tumor microenvironment. Moreover, we identified novel miRNA targets, such as the Cyclin-Dependent Kinase (CDK) family, linked to carcinogenesis by in silico analysis. In conclusion. this study identified lung miRNA signatures related to the tumorigenic microenvironment, suggesting their possible role in improving the evaluation of lung cancer onset.

Background: The use of immune-modifying biological agents has markedly changed the clinical course and the management of Inflammatory bowel diseases (IBDs). Active post-marketing surveillance programs are fundamental to early recognize expected and unexpected adverse events (AEs), representing a powerful tool to better determine the safety profiles of biologics in a real-world setting. Methods: This study aimed to identify the occurrence of AEs and therapeutic failures linked to biological drugs used in gastroenterology units during a prospective pharmacovigilance program in Southern Italy. Patients affected by IBDs and treated with a biologic agent, from 1 January 2019, to 31 December 2021 (study period) in three gastroenterology units were enrolled. Results: Overall, 358 patients with a diagnosis of active Crohn’s disease or ulcerative colitis satisfying inclusion criteria have been enrolled. Infliximab (IFX) was the most administered drug at the index date (214; 59.8%), followed by Adalimumab (ADA; 89; 24.9%), Golimumab (GOL; 37; 10.3%), Vedolizumab (VDZ; 17; 4.7%) and Ustekimumab (UST; 1; 0.3%). Seventy-three patients (20.4%) experienced at least one AE, while 62 patients (17.3%) had therapeutic ineffectiveness. No serious AEs were reported in the follow-up period in the enrolled patients. AEs have been described with IFX (50/214; p = 0.47), GOL (7/37; p = 0.78), ADA (13/89; p = 0.18), and VDZ (3/17; p = 0.52), no AEs have been noticed with UST (0/1). Conclusions: Based on the low rate of AEs observed and withdrawal from treatment, our data seem to corroborate the favorable beneficial/risk profile of biologics for IBDs.

The purpose of this multicenter randomized controlled trial was to compare the clinical, radiographic, and patient-centered outcomes of early loaded mandibular overdentures deliberately placed on two or three implants. The outcomes were: implant and prosthesis success and survival rates; biological and technical complications; marginal bone loss; patient satisfaction; and periodontal parameters. The results showed no differences between the groups in any of the outcomes analyzed. With the limitations of the present study, and looking at long-term follow-up, the gold standard of prosthetic rehabilitations with attachments, in agreement with the scientific community, should prefer two non-splinted implants.

Here, we describe the dataset of seismic envelopes used to study the S-wave Q-coda attenuation quality factor Qc of the Gargano Promontory (Southern Italy). With this dataset, we investigated the crustal seismic attenuation by the Qc parameter. We collected this dataset starting from two different earthquake catalogues: the first regarding the period from April 2013 to July 2014; the second regarding the period from July 2015 to August 2018. Visual inspection of the envelopes was carried out on recordings filtered with a Butterworth two-poles filter with central frequency fc = 6 Hz. The obtained seismic envelopes of coda decay can be linearly fitted in a bilogarithmic diagram in order to obtain a series of single source-receiver measures of Qc for each seismogram component at different frequency fc. The analysis of the trend Qc(fc) gives important insights into the heterogeneity and the anelasticity of the sampled Earth medium.

We investigate crustal seismic attenuation by the coda quality parameter (Qc) in the Gargano area (Southern Italy), using a recently released dataset composed of 191 small earthquakes (1.0 ≤ ML ≤ 2.8) recorded by the local OTRIONS and the Italian INGV seismic networks, over three years of seismic monitoring. Following the single back-scattering theoretical assumption, Qc was computed using different frequencies (in the range of 2–16 Hz) and different lapse times (from 10 to 40 s). The trend of Qc vs. frequency is the same as that observed in the adjacent Umbria-Marche region. Qc at 1 Hz varies between 11 and 63, indicating that the area is characterized by active tectonics, despite the absence of high-magnitude earthquakes in recent decades. The 3D mapping procedure, based on sensitivity kernels, revealed that the Gargano Promontory is characterized by very low and homogeneous Qc at low frequencies, and by high and heterogeneous Qc at high frequencies. The lateral variations of Qc at 12 Hz follow the trend of the Moho in this region and are in good agreement with other geophysical observations.

The transient scattering of in-plane elastic waves from a finite-sized periodic structure, comprising a regular grid of Swiss-cross holes arranged according to a square lattice, is considered. The theoretical and numerical modelling focuses on the unexplored ultrasonic frequency regime, well beyond the first, wide, locally resonant band-gap of the structure. Dispersive properties of the periodic array, determined by Bloch–Floquet analysis, are used to identify candidates for high-fidelity GPU-accelerated transient scattering simulations. Several unusual wave phenomena are identified from the simulations, including negative refraction, focusing, partial cloaking, and wave trapping. The transient finite element modelling framework offers insights on the lifetimes of such phenomena for potential practical applications. In addition, nonideal counterparts with rough edges are modelled using characteristic statistical parameters commonly observed in additive manufacturing. The analysis shows that the identified wave effects appear likely to be robust with respect to potential manufacturing uncertainties in future studies.

Schistosomiasis is a parasitic disease that affects more than 250 million people. The treatment is limited to praziquantel and the control of the intermediate host with the highly toxic molluscicidal niclosamide. Marine algae are a poorly explored and promising alternative that can provide lead compounds, and the use of multivariate analysis could contribute to quicker discovery. As part of our search for new natural compounds with which to control schistosomiasis, we screened 45 crude extracts obtained from 37 Brazilian seaweed species for their molluscicidal activity against Biomphalaria glabrata embryos and schistosomicidal activities against Schistosoma mansoni. Two sets of extracts were taxonomically grouped for metabolomic analysis. The extracts were analyzed by GC–MS, and the data were subjected to Pattern Hunter and Pearson correlation tests. Overall, 22 species (60%) showed activity in at least one of the two models. Multivariate analysis pointed towards 3 hits against B. glabrata veliger embryos in the Laurencia/Laurenciella set, 5 hits against B. glabrata blastula embryos, and 31 against S. mansoni in the Ochrophyta set. Preliminary annotations suggested some compounds such as triquinane alcohols, prenylated guaianes, dichotomanes, and xenianes. Despite the putative identification, this work presents potential candidates and can guide future isolation and identification.

The aim of this retrospective study was to clinically evaluate the five-year outcomes of implants placed following a combined approach to the sinus, consisting of sequential drills and osteotomes. Medical records of patients with implants placed in combination with crestal sinus lift using sequential drills and osteotomes, with a residual alveolar bone crest between 4 to 8 mm, and a follow-up of at least five years after final loading, were evaluated. Outcomes were implant and prosthetic survival and success rates, any complication, and marginal bone loss. Data from 96 patients (53 women and 43 men; mean age 54.7 years; range 23–79 years) were collected. A total of 105 single implants were analyzed. After five years of function, two implants were lost and two prostheses failed. No major biological or prosthetic complications occurred. At the five-year examination, the marginal bone loss was 1.24 ± 0.28 mm. Within the limitations of this retrospective study it can be concluded that implants placed following a combined approach to the sinus consisting of sequential drills and osteotomes seem to be a viable option for the treatment of posterior atrophic edentulous maxilla.

Crest module can be defined as the portion of a two-piece implant designed to retain the prosthetic components and to allows the maintenance of the peri-implant tissues in the transition zone. Aim: To evaluate the three-year after loading clinical and radiographic data, collected from patients that received a prosthetic rehabilitation on conical connection implants with partial machined collar (PMC; CC Group) and same body-designed implants, with flat-to-flat connection and groovy neck design (FC Group). Materials and Methods: A retrospective chart review of previously collected data, including documents, radiographs, and pictures of patients who received at least one implant-supported restoration on NobelReplace CC PMC or NobelReplace Tapered Groovy implants was performed. Patients with at least three years of follow-up after final loading were considered for this study. Outcomes measures were implant and prosthesis failures, any biological or technical complications, marginal bone loss. Results: Eight-two patients (44 women, 38 men; average age 55.6) with 152 implants were selected and divided in two groups with 77 (CC group) and 75 (FC group), respectively. Three years after final loading, one implant in CC group failed (98.7% survival rate), while no implants failed in FC group (100% survival rate). One restoration failed in CC group (98.7% survival rate) with no restoration failing in the FC one (100% survival rate). Differences were not statistically significant (p = 1.0). Three years after final loading, mean marginal bone loss was 0.22 ± 0.06 mm (95% CI 0.2–0.24) in CC group and 0.62 ± 0.30 mm (95% CI 0.52–0.72) in FC group. The difference was statistically significant (0.40 ± 0.13 mm; 95% CI 0.3–0.5; p = 0.003). Conclusion: with the limitation of this retrospective comparative study, implants with conical connection and partial machined collar seem to achieve a trend of superior outcomes if compared with implants with flat connection and groovy collar design.

In this new century, sustainable development challenges chemical sciences to develop new and clean technological processes. The agri-food industry produces significant quantities of waste, raising significant economic and environmental concerns. Food waste valorization using environmentally friendly procedures is of increasing importance. This study describes the use of several Natural Deep Eutectic Solvents (NADESs) for the microwave-assisted extraction (MAE) of valuable bioactive phenolic compounds from olive oil processing wastes. The extracted samples were characterized by liquid chromatography electrospray ionization quadrupole time-of-flight mass spectrometry (LC-ESI-QTOF/MS) analysis and the quantification of the phenolic compounds was performed by HPLC analysis. The obtained data were compared with those obtained using water as the solvent in the same extraction conditions. The extraction process is nontoxic, simple and selective and meets most of the criteria to be considered as a sustainable process, with the solvents arising directly from nature.

Purpose: To evaluate implant and prosthetic survival rates, complications, patient satisfaction, and biological outcomes of patients rehabilitated with a ball attachment system for implant retained- and supported-overdentures (IOV), which was in function for 3 to 5 years. Methods: This retrospective study evaluated data collected from patients treated between April 2001 and May 2018 with IOV on splinted and non-splinted implants and a ball attachment system. Patients were followed for 36 to 206 months (mean follow-up was 128.1 ± 51.9 months). Data were collected at the 3- and 5-year follow-up examination. Outcome measures were implant and prosthetic survival rates, technical complications, marginal bone loss (MBL), oral health impact profile (OHIP), and periodontal parameters (bleeding on probing and plaque index). Results: A total of 46 patients (16 males and 30 females) with 124 implants were included in this study. Twenty-five implant-retained overdentures were delivered on 53 unsplinted implants, while the other 21 patients received an implant-supported overdentures and the implants were splinted. At the five-year follow-up examination, one implant and one prosthesis failed in the unsplinted group, resulting in a cumulative survival rate of 97.8% at the patient level. Two minor technical complications were experienced. Conclusions: Implant overdenture retained or supported by ball attachment systems showed high implant and prosthetic survival and success rates. A low number of complications, high patient satisfaction, and successful biological parameters were experienced in the mid-term follow-up. Data need to be confirmed by further randomized trials.

Purpose: To compare virtual planning accuracy of novel computer-assisted, template-based implant placement techniques, which make use of CAD/CAM stereolithographic surgical templates with or without metallic sleeves. Furthermore, to compare open versus closed sleeves for templates without metallic sleeves. Materials and methods: Any partially edentulous patients requiring at least one implant to be placed according to a computer-assisted template-based protocol were enrolled. Patients were randomized according to a parallel group design into two arms: Surgical template with or without metallic sleeves. Three deviation parameters (angular, horizontal, vertical) were defined to evaluate the discrepancy between the planned and placed implant positions. Results: No implants failed, and no complications were experienced. Forty-one implants were placed using surgical templates with metallic sleeves while 49 implants were placed with a surgical template without metallic sleeves. Of these, 16 implants were placed through open sleeves and 33 through closed sleeves. There was a statistically significant difference in angle (p = 0.0212) and in the vertical plan (p = 0.0073) with lower values for implants placed with a surgical template without metallic sleeves. In the test group, close sleeves were more accurate compared with open sleeves in angle (p = 0.0268) and in horizontal plan (p = 0.0477). Conclusion: With the limitations of the present study, surgical templates without metallic sleeves were more accurate in the vertical plan and angle compared to the conventional template with metallic sleeves. Open sleeves should be used with caution in the molar region only in case of reduced interarch space. Further research is needed to confirm these preliminary results.

Purpose: To analyze implant and prosthetic survival rates, complications, patient satisfaction, and biological parameters of patients rehabilitated with implant overdentures (IOV) on splinted and nonsplinted implants and different attachment systems, in function for one to 17 years. Methods: This retrospective study evaluated data collected from patients rehabilitated with implant overdentures between January 2001 and December 2016 in nine different centers. Outcome measures were implant and prosthetic success rates, mechanical complications, marginal bone loss (MBL), oral health impact profile (OHIP), bleeding on probing, and plaque index. Results: A total of 581 implants were installed in 194 patients. Patients were followed for a mean period of 60.6 months (range 6⁻206). Eighty-nine patients received 296 low profile attachment (OT Equator), 62 patients received 124 ball attachments, and 43 patients received 107 Locator attachments. In eighty-three patients the implants were splinted with computer aided design/computer aided manufacturing (CAD/CAM) or casted bar. At the last follow-up, 10 implants failed in eight patients. Statistical significance was found for failed prostheses (P = 0.0723) and complications (P = 0.0165), with better values for splinted implants. No statistically significant differences were found in proportion of implant and prosthetic failure (P > 0.05). At a five-year follow-up, proportion of complications (P = 0.0289) and failed prostheses (P = 0.0069) were statistically higher for IOV on Locator attachments. No difference was founded in MBL at one- and two-year follow-up between different attachment systems (P > 0.05). Statistically significant improvement in all the OHIP categories was reported in all the patients, after one year of function. Conclusions: Implant overdenture showed high implant and prosthetic survival rates, low complications, high patient satisfaction, and good biological parameters in the long-term follow-up. Splinting the implants may reduce number of mechanical complications. Locator attachments showed higher number of complications. Further studies are needed to confirm these preliminary results.