Search

Shape-memory polyester films having functional groups were prepared and further grafted onto poly(N-isopropylacrylamide) (PNIPAAm) via atom-transfer radical polymerization. The grafting point of PNIPAAm was controlled by changing the composition of good and poor solvents. In the case of graft polymerization using only good solvents, the film swells, and polymerization proceeds not only from the surface but also from the internal polymerization initiation points. By increasing the proportion of poor solvents, PNIPAAm was grafted onto the surface of the film without swelling. The samples grafted to the interior regions of the film exhibited a decrease in the shape-memory recovery rate and recovery speed, whereas the samples grafted only to the surface of the film exhibited high shape-memory properties. Furthermore, contact-angle measurements revealed that the surface-grafted polymer exhibited changes in surface properties in response to film deformation. Because the deformation of the film is a large change, on the order of several millimeters, the deformation of the manually stretched film was shown to control molecular-level changes on the surface.

This paper presents a proposal of an efficient binaural room-acoustics auralization method, an essential goal of room-acoustics modeling. The method uses a massively parallel wave-based room-acoustics solver based on a dispersion-optimized explicit time-domain finite element method (TD-FEM). The binaural room-acoustics auralization uses a hybrid technique of first-order Ambisonics (FOA) and head-related transfer functions. Ambisonics encoding uses room impulse responses computed by a parallel wave-based room-acoustics solver that can model sound absorbers with complex-valued surface impedance. Details are given of the novel procedure for computing expansion coefficients of spherical harmonics composing the FOA signal. This report is the first presenting a parallel wave-based solver able to simulate room impulse responses with practical computational times using an HPC cloud environment. A meeting room problem and a classroom problem are used, respectively, having 35 million degrees of freedom (DOF) and 100 million DOF, to test the parallel performance of up to 6144 CPU cores. Then, the potential of the proposed binaural room-acoustics auralization method is demonstrated via an auditorium acoustics simulation of up to 5 kHz having 750,000,000 DOFs. Room-acoustics auralization is performed with two acoustics treatment scenarios and room-acoustics evaluations that use an FOA signal, binaural room impulse response, and four room acoustical parameters. The auditorium acoustics simulation showed that the proposed method enables binaural room-acoustics auralization within 13,000 s using 6144 cores.

Wave-based acoustics simulation methods such as finite element method (FEM) are reliable computer simulation tools for predicting acoustics in architectural spaces. Nevertheless, their application to practical room acoustics design is difficult because of their high computational costs. Therefore, we propose herein a parallel wave-based acoustics simulation method using dissipation-free and dispersion-optimized explicit time-domain FEM (TD-FEM) for simulating room acoustics at large-scale scenes. It can model sound absorbers with locally reacting frequency-dependent impedance boundary conditions (BCs). The method can use domain decomposition method (DDM)-based parallel computing to compute acoustics in large rooms at kilohertz frequencies. After validation studies of the proposed method via impedance tube and small cubic room problems including frequency-dependent impedance BCs of two porous type sound absorbers and a Helmholtz type sound absorber, the efficiency of the method against two implicit TD-FEMs was assessed. Faster computations and equivalent accuracy were achieved. Finally, acoustics simulation of an auditorium of 2271 m3 presenting a problem size of about 150,000,000 degrees of freedom demonstrated the practicality of the DDM-based parallel solver. Using 512 CPU cores on a parallel computer system, the proposed parallel solver can compute impulse responses with 3 s time length, including frequency components up to 3 kHz within 9000 s.

IoT-based measurement systems for manufacturing have been widely implemented. As components that can be implemented at low cost, BLE beacons have been used in several systems developed in previous research. In this work, we focus on the Kanban system, which is a measure used in manufacturing strategy. The Kanban system emphasizes inventory management and is used to produce only required amounts. In the Kanban system, the Kanban cards are rotated through the factory along with the products, and when the products change to a different process route, the Kanban card is removed from the products and the products are assigned to another Kanban. For this reason, a single Kanban cannot trace products from plan to completion. In this work, we propose a system that uses a Bluetooth low energy (BLE) beacon to connect Kanbans in different routes but assigned to the same products. The proposed method estimates the beacon status of whether the Kanban is inside or outside a postbox, which can then be computed by a micro controller at low computational cost. In addition, the system connects the Kanbans using the beacons as paired connection targets. In an experiment, we confirmed that the system connected 70% of the beacons accurately. We also confirmed that the system could connect the Kanbans at a small implementation cost.

This paper presents a crossed rib diffuser (CRD) as an effective tool for room acoustic control. We performed an experimental investigation of its effectiveness using a specimen manufactured for this trial. The CRD is constructed by overlapping two one-dimensional (1D) periodic rib diffusers with different specifications so that they are crossed at non-right angles. The CRD achieves a higher scattering coefficient than 1D periodic rib diffusers in a wide band while maintaining the simple and friendly design of 1D periodic rib diffusers applicable to various architectural spaces. Moreover, inserting an absorbing layer between upper and lower ribs of the CRD, (CRD-A) yields a high broadband absorption coefficient. We first evaluated the random-incidence scattering coefficient of CRD using a 1/5 scaled model in comparison with those of 1D periodic diffusers assessed with a numerical method. Then, absorption coefficients for the CRD and the CRD-A were measured using a reverberation room. Subsequently, an experiment on a small meeting room with a 1D periodic rib diffuser, the CRD and the CRD-A was conducted to present performance of the CRD in room acoustic control. Impulse response measurements and evaluations of reverberation parameters (T20 and EDT) and speech clarity (D50) were conducted. Additionally, we present differences in structure of reflected sounds found for the flat wall, the CRD and the CRD-A visually using a four-channel sound field microphone.

This paper presents a proposal of a time domain room acoustic solver using novel fourth-order accurate explicit time domain finite element method (TD-FEM), with demonstration of its applicability for practical room acoustic problems. Although time domain wave acoustic methods have been extremely attractive in recent years as room acoustic design tools, a computationally efficient solver is demanded to reduce their overly large computational costs for practical applications. Earlier, the authors proposed an efficient room acoustic solver using explicit TD-FEM having fourth-order accuracy in both space and time using low-order discretization techniques. Nevertheless, this conventional method only achieves fourth-order accuracy in time when using only square or cubic elements. That achievement markedly impairs the benefits of FEM with geometrical flexibility. As described herein, that difficulty is solved by construction of a specially designed time-integration method for time discretization. The proposed method can use irregularly shaped elements while maintaining fourth-order accuracy in time without additional computational complexity compared to the conventional method. The dispersion and dissipation characteristics of the proposed method are examined respectively both theoretically and numerically. Moreover, the practicality of the method for solving room acoustic problems at kilohertz frequencies is presented via two numerical examples of acoustic simulations in a rectangular sound field including complex sound diffusers and in a complexly shaped concert hall.