Search

Oral squamous cell carcinoma (OSCC) is characterized by poor survival, mostly due to local invasion, loco-regional recurrence, and metastasis. Given that the weakening of cell-to-cell adhesion is a feature associated with the migration and invasion of cancer cells, different studies have explored the prognostic utility of cell adhesion molecules such as E-cadherin (E-cad). This study aims to summarize current evidence in a meta-analysis, focusing on the prognostic role of E-cad in OSCC. To find studies meeting inclusion criteria, Scopus, Web of Science, EMBASE, Medline, and OpenGrey databases were systematically assessed and screened. The selection process led to 25 studies, which were considered eligible for inclusion in the meta-analysis, representing a sample of 2553 patients. E-cad overexpression was strongly associated with longer overall survival (OS) with Hazard Ratio (HR) = 0.41 95% confidence interval (95% CI) (0.32–0.54); p < 0.001 and disease-free survival with HR 0.47 95% CI (0.37–0.61); p < 0.001. In terms of OS, patients with tongue cancer experienced better survivability when expressing E-cad with HR 0.28 95% CI (0.19–0.43); p < 0.001. Globally, our findings indicate the prognostic role of the immunohistochemical assessment of E-cad in OSCC and its expression might acquire a different role based on the oral cavity subsites.

Air–powder abrasive treatment has shown interesting results for dental implant treatments; however, which powder is most effective is still an open question. This in vitro pilot study aims to compare the ability of six different powders (sodium bicarbonate powder—65 µm and 40 µm; glycine powder; erythritol powder—with and without cetylpyridinium chloride and calcium carbonate) to remove biofilm from contaminated titanium discs and to evaluate the physical effects of such treatments on surface topography. Seventy-four titanium discs with two different surface roughness were treated after S. sanguinis contamination. Cleaning ability and surface changes were assessed by scanning electron and confocal laser scanning microscopy as well as profilometry. All treated surfaces showed minimal bacterial residues compared to untreated ones, regardless of the treatment provided (remaining biofilm range 11.4% to 28.4% on machined discs—range 10.7% to 18.3% on moderately rough surface discs). No relevant changes on the microscopic ultrastructure of the disc surfaces were noted. The different treatments reduced biofilm up to 89.3 and 88.6% on moderately rough and machined discs, respectively, and they all showed statistically significant superiority over calcium carbonate powder. None of the tested treatments rendered the disc surfaces biofilm-free. Therefore, combined mechanical and chemical decontamination methods are still recommended to achieve maximum biofilm removal for peri-implantitis treatment.

Swallowing is a complex but stereotyped motor activity aimed at serving two vital purposes: alimentary function and the protection of upper airways. Therefore, any impairment of the swallowing act can represent a significant clinical and personal problem that needs an accurate diagnosis by means of reliable and non-invasive techniques. Thus, a systematic review and meta-analysis was performed to investigate the reliability of the Iowa Oral Pressure Instrument (IOPI) in distinguishing healthy controls (HC) from patients affected by swallowing disorders or pathologies and conditions that imply dysphagia. A comprehensive search was conducted following the Preferred Reporting Items for Systematic reviews and Meta-Analyses (PRISMA) guidelines and using PubMed, Scopus, Web of Science, Cochrane, and Lilacs databases. Overall, 271 articles were identified and, after a three-step screening, 33 case-control and interventional studies reporting IOPI measurements were included. The methodological quality of the retrieved studies resulted in being at a low risk of bias. The meta-analysis on case-control studies showed that maximum tongue pressure (MIP) values were always higher in HC than in patients, with an overall effect of the MIP difference of 18.2 KPa (17.7–18.7 KPa CI). This result was also confirmed when the sample was split into adults and children, although the MIP difference between HC and patients was greater in children than in adults (21.0 vs. 15.4 KPa in the MIP mean difference overall effect, respectively). Tongue endurance (TE) showed conflicting results among studies, with an overall effect among studies near zero (0.7 s, 0.2–1.1 s CI) and a slight tendency toward higher TE values in HC than in patients. Among the intervention studies, MIP values were higher after treatment than before, with a better outcome after the experimental tongue training exercise than traditional treatments (the MIP mean difference overall effect was 10.8 and 2.3 KPa, respectively). In conclusion, MIP values can be considered as a reliable measure of swallowing function in adults and in children, with a more marked MIP difference between HC and patients for the children population. MIP measures in patients are also able to detect the best outcome on the tongue function after the training exercise compared to traditional training.

Minimising marginal bone loss around dental implants is of paramount importance. The success of methods such as platform switching (PS) and laser-micro-texturing (LM) are well documented. Whether or not a combination of these designs will further improve outcomes has not been studied previously. Hence, this prospective, randomized controlled single-centre pilot study compared the clinical and microbiological outcomes of implants with both PS and LM (test) to implants with only LM (control). A test and control implant were placed in thirteen patients totalling 26 implants. The primary investigated outcome was marginal bone level (MBL); secondary outcomes were peri-implant probing depths (PPD), bleeding on probing (BOP) and marginal tissue height (MTH). Additionally, the presence of five putative periodontal pathogens were assessed using real-time polymerized chain reaction. At 12 months the overall implant survival rate was 95.8%. MBL change was not found to be different between test and control at any time points, but a significant change was detected within the test implants at 6 months compared to baseline (p = 0.006). No differences were found in the secondary outcomes. Average PPD at 12 months was 2.68 ± 0.73 mm and 2.30 ± 0.46 mm and average change in MTH was 0.05 ± 0.72 mm and −0.24 ± 0.59 mm at tests and controls. No differences were reported in BOP frequency. Total periodontal pathogens count revealed no significant difference among control, test implants and adjacent tooth sites. Within the limitations of this study, it can be concluded that the addition of PS to LM implants does not significantly alter either short-term clinical outcomes or the vulnerability to pathogenic microflora colonization.

Evaluating primary stability is important to predict the prognosis of dental implant treatment. Primary stability is decreased in a low bone density site such as osteoporosis. However, it is difficult to apply in small animal and the effect of the different implant surface topography for the primary stability at low bone density site has not yet fully been investigated. The purpose of the present study was to evaluate the influence of implant surface topography on primary stability in a standardized osteoporosis animal model. Six rabbits underwent ovariectomy and administrated glucocorticoid to induce an osteoporosis model. Sham-operations were performed in additional six rabbits. Implants with machined or oxidized-surfaces were inserted into the femur epiphyses and insertion torque (IT) and implant stability quotient (ISQ) were measured. In sham model, the IT and ISQ did not differ significantly between the both implant. However, the IT value of oxidized-surface implant was significantly higher than that of the machined implant in the osteoporosis model. Meanwhile, ISQ did not significantly differ between the machined and oxidized-surfaced implants. In conclusion, the IT of implants is higher with rough than with smooth surfaces but that there are no differences in ISQ value between different surfaces in a standardized osteoporosis bone reduced rabbit model.

This in vitro study aimed at evaluating the physical and mechanical properties of newly developed scaffolds of poly (lactic-co-glycolic acid) (PLGA) and biphasic ceramic (Hydroxyapatite HA + beta-tricalciumphosphate β-TCP) with or without collagen impregnation to be used for bone regeneration in the oral and maxillofacial district. Solvent casting and particle leaching techniques were used to produce the scaffolds, which were then divided into six groups according to PLGA/HA + β-TCP ratio and impregnation with collagen: G1 (50/50) + collagen; G2 (60/40) + collagen; G3 (40/60) + collagen; G4 (50/50); G5 (60/40); G6 (40/60). As control group, inorganic xenogenous bone was used. Structure and porosity were evaluated by scanning electron microscopy, and a chemical analysis was performed through an energy-dispersive spectrometer. Moreover, to evaluate the hydrophilicity of the samples, a wettability test was conceived, and finally, mechanical properties were examined by a compression test. High porosity and interconnectivity, resulting in a large surface area and great fluid retention capacity, were presented by the PLGA/HA + β-TCP scaffolds. In the composite groups, collagen increased the wettability and the mechanical resistance, although the latter was not statistically affected by the percentage of HA + β-TCP added. Further in vitro and in vivo studies are needed for a deeper understanding of the influence of collagen on the biological behavior of the developed composite materials and their potential, namely biocompatibility and bioactivity, for bone tissue regeneration.

During insertion of dental implants, measurement of dynamic parameters such as the torque-depth curve integral or insertion energy might convey more information about primary stability than traditional static parameters such as the insertion or removal torque. However, the relationship between these dynamic parameters, bone density, and implant geometry is not well understood. The aim of this investigation was to compare static and dynamic implant stability measurements concerning three different implant designs when implants were inserted into bovine bone ribs and dynamic parameters were collected using an instantaneous torque measuring implant motor. Standard implant osteotomies were created in segments of bovine ribs. After measuring the bone density using the implant motor, 10 cylindrical, 10 hybrid tapered-cylindrical, and 10 modified cylindrical implants were placed, and their primary stability was assessed by measuring the torque–depth curve integral, along with insertion and removal torque. The relationship between these quantities, bone density, and implant geometry was investigated by means of regression and covariance analysis. The regression lines describing the relationship between the torque–depth integral and bone density differed significantly from those describing the relationship between insertion torque, removal torque, and bone density for all three designs. The torque–depth curve integral provides different information about immediate primary stability than insertion and removal torque and in certain clinical conditions might be more reliable than these static parameters for assessing implant primary stability. Further research should be carried out to investigate the findings of the present study.