Search

Flow resistance is a fundamental control of flow hydraulics in streams and rivers. In this paper, five dimensionless factors affecting the Manning roughness coefficient n and attributed to the external roughness coefficient n1 and the internal roughness coefficient n2 were analyzed comprehensively. And then, dimensionless factors affecting n1 and n2 with precise physical meanings were proposed. With a calculation method for roughness coefficient fitted and analyzed based on observation data from published research papers, the analysis results showed that the external resistance coefficient is closely related to the dimensionless factor D84/R. The correlation between the dimensionless factor (D16/D50) and the internal roughness coefficient n2 was not significant. While the factors H/D50, J, and Sv showed significant correlation. In addition, the expression of external roughness n1 is calibrated based on the observation data of 102 cross-sections listed in previous works, while the internal roughness n2 is calibrated by 20 experimental model tests. Finally, an equation describing the Manning&rsquo, s roughness coefficient is presented and verified based on 24 groups of observation data from Dongchuan Debris Flow Observation Station (DDFORS) in China. This study is contributing toward a comprehensive model for the Manning coefficient, which provide a scientific reference for the research on disaster prevention and mitigation of debris flow.

Mine waste debris flows are a type of man-made debris flow that commonly lead to major disasters. In this study, the Xiaotong Gully, which is located in the Xiaoqinling gold mining area in China and contains a typical mine waste debris flow gully, was selected as the study area. Since a debris flow can be classified as either a geotechnical debris flow or hydraulic debris flow based on its initiation mode, we conducted 46 experimental model tests to explore the initiation conditions of these two different types of debris flows. According to our tests, the initiation conditions of hydraulic debris flows were mainly affected by the flume gradient, the water content of the mine waste, the inflow discharge, the water supply modes, and the clay particle content. A larger flume gradient and higher mine waste water content were more conducive to initiating a hydraulic debris flow. However, the influence of the water supply mode on the initiation of a hydraulic debris flow was complex (influenced by factors such as water content of mine waste, runoff discharge rate and rainfall intensity). The critical runoff of a hydraulic debris flow, which starts with a parabolic relationship to the clay particle content of the mine waste, decreased with increasing clay particle content and then increased. There was a minimum critical runoff when the clay content of the mine waste was 30%. The initiation conditions of a geotechnical debris flow were mainly affected by the flume gradient, the water content, and the clay particle content. The critical gradient of a geotechnical debris flow decreased with increasing water content and had a parabolic relationship to the clay particle content. In tests 31&ndash, 46 of this study, the second and third critical slopes both decreased and then increased with increasing clay particle content. These preliminary research results provide a scientific reference for subsequent research on the prevention and mitigation of mine waste debris flows.

Cadmium telluride (CdTe) films were deposited on glass substrates by direct current (DC) magnetron sputtering, and the effect of substrate-target distance (Dts) on properties of the CdTe films was investigated by observations of X-ray diffraction (XRD) patterns, atomic force microscopy (AFM), UV-VIS spectra, optical microscopy, and the Hall-effect measurement system. XRD analysis indicated that all samples exhibited a preferred orientation along the (111) plane, corresponding to the zinc blende structure, and films prepared using Dts of 4 cm demonstrated better crystallinity than the others. AFM studies revealed that surface morphologies of the CdTe films were strongly dependent on Dts, and revealed a large average grain size of 35.25 nm and a high root mean square (RMS) roughness value of 9.66 nm for films fabricated using Dts of 4 cm. UV-VIS spectra suggested the energy band gap (Eg) initially decreased from 1.5 to 1.45 eV, then increased to 1.68 eV as Dts increased from 3.5 to 5 cm. The Hall-effect measurement system revealed that CdTe films prepared with a Dts of 4 cm exhibited optimal electrical properties, and the resistivity, carrier mobility, and carrier concentration were determined to be 2.3 &times, 105 Ω∙cm, 6.41 cm2∙V&minus, 1∙S&minus, 1, and 4.22 &times, 1012 cm&minus, 3, respectively.