Search

The aim of this study was to investigate the effects of Lentilactobacillus plantarum (LP), cellulase (CE), and xylanase (XE) supplementation on the fermentation quality, chemical composition, and bacterial community of Caragana korshinskii Kom. silage. Four groups were designed for the study. No additives were used in the control group (CK), and LP (1 × 106 cfu/g), CE (1 × 104 IU/g) and XE (2 × 105 IU/g) were added to the experimental groups on a fresh matter basis, with three replicates per group. To promote fermentation, 5% molasses was added to all of the groups. On days 15 and 60, fermentation quality, chemical composition and the bacterial community were analysed. The pH of groups CE and XE was lower than that of the CK group at 60 days. During ensiling, the lactic acid (LA) content in the experimental groups and the acetic acid (AA) content in the CK and LP groups increased. At 60 days, the dominant genera in the CK and LP groups was Weissella and the dominant genera in the CE and XE groups was Lentilactobacillus. At different times during silage, nucleotide metabolism was enhanced, whereas the metabolism of carbohydrate, amino acids, energy, cofactors and vitamins was inhibited in the LP group. However, the metabolism of amino acids, energy, cofactors and vitamins in the CE and XE groups was increased, whereas the metabolism of nucleotides was inhibited. In conclusion, LP, CE and XE could exert a positive effect on the fermentation quality of C. korshinskii Kom. silage by shifting the bacterial community composition.

China’s rapid urbanization drive, marked by extensive urban renewal projects, necessitates a meticulous examination of their transformational impact on the human settlement environment (HSE) across urban landscapes. This study investigates the impact of China’s urban renewal progress on the spatial–temporal changes in the HSE from 2009 to 2019, using data from 40 prefecture-level cities in the Yangtze River Delta. Our findings reveal an overall positive relationship between the spatio–temporal evolution of urban renewal and the HSE, suggesting that urban renewal projects have had a beneficial impact, particularly following the announcement of China’s New Urbanization policy in 2014. However, the extent of this positive impact varied among different areas, with more significant improvements observed in core cities and economically developed areas. Additionally, our study uncovered significant variations in how urban renewal influenced the HSE over time. We found that the primary influencing factor shifted from material renewal to industrial renewal. These findings offer valuable insights for improving the HSE during urban renewal processes, both in China and other regions undergoing rapid urbanization.

Cinnamomum camphora is a traditional aromatic plant used to produce linalool and borneol flavors in southern China; however, its leaves also contain many other unutilized essential oils. Herein, we report geographic relationships for the yield and compositional diversity of C. camphora essential oils. The essential oils of 974 individual trees from 35 populations in 13 provinces were extracted by hydrodistillation and analyzed qualitatively and quantitatively by gas chromatography-mass spectrometry and gas chromatography-flame ionization detection, respectively. Oil yields ranged from 0.01% to 3.46%, with a significantly positive correlation with latitude and a significantly negative correlation with longitude. In total, 41 compounds were identified, including 15 monoterpenoids, 24 sesquiterpenoids, and two phenylpropanoids. Essential oil compositions varied significantly among individuals and could be categorized into various chemotypes. The six main chemotypes were eucalyptol, nerolidol, camphor, linalool, selina, and mixed types. The other 17 individual plants were chemotypically rare and exhibited high levels of methyl isoeugenol, methyl eugenol, δ-selinene, or borneol. Eucalyptol-type plants had the highest average oil yield of 1.64%, followed in decreasing order by linalool-, camphor-, mixed-, selina-, and nerolidol-type plants. In addition, the five main compounds exhibited a clear geographic gradient. Eucalyptol and linalool showed a significantly positive correlation with latitude, while selina-6-en-4-ol was significantly and negatively correlated with latitude. trans-Nerolidol and selina-6-en-4-ol showed significantly positive correlations with longitude, whereas camphor was significantly and negatively correlated with longitude. Canonical correspondence analysis indicated that environmental factors could strong effect the oil yield and essential oil profile of C. camphora.

Acute skin damage caused by burns or cuts occurs frequently in people’s daily lives. Such wounds are difficult to heal normally and have persistent inflammation. Wound dressings not only improve the speed of wound healing, but also protect and cover the wound well. Hydrogels have the characteristics of good flexibility, high water content, and good biocompatibility, and are widely used in biomedicine and other fields. Common hydrogels are mainly natural hydrogels and synthetic hydrogels. Hydrogels cross-linked using different raw materials and different methods have different performance characteristics. Natural hydrogels prepared using polysaccharides are simple to obtain and have good biocompatibility, but are inferior to synthetic hydrogels in terms of mechanical properties and stability, and a single polysaccharide hydrogel cannot meet the component requirements for wound healing. Therefore, functional composite hydrogels with high mechanical properties, high biocompatibility, and high antibacterial properties are the current research hotspots. In this review, several common polysaccharides for hydrogel synthesis and the synthesis methods of polysaccharide hydrogels are introduced, and functional composite hydrogel dressings from recent years are classified. It is hoped that this can provide useful references for relevant research in this field.

Antibacterial hydrogel has excellent antibacterial property and good biocompatibility, water absorption and water retention, swelling, high oxygen permeability, etc.; therefore, it widely applied in biomedicine, intelligent textiles, cosmetics, and other fields, especially for medical dressing. As a wound dressing, the antibacterial hydrogel has the characteristics of absorbing wound liquid, controlling drug release, being non-toxic, being without side effects, and not causing secondary injury to the wound. Its preparation method is simple, and can crosslink via covalent or non-covalent bond, such as γ-radiation croFsslinking, free radical polymerization, graft copolymerization, etc. The raw materials are easy to obtain; usually these include chondroitin sulfate, sodium alginate, polyvinyl alcohol, etc., with different raw materials being used for different antibacterial modes. According to the hydrogel matrix and antibacterial mode, the preparation method, performance, antibacterial mechanism, and classification of antibacterial hydrogels are summarized in this paper, and the future development direction of the antibacterial hydrogel as wound dressing is proposed.

Crocins are valuable bioactive components of gardenia fruit, and their biosynthesis and accumulation have attracted widespread interest. Studies have investigated the biosynthesis and accumulation of crocin based on Illumina sequencing, but there is a lack of reports based on full-length transcriptome sequencing. Utilising SMRT sequencing and high-performance liquid chromatography (HPLC), we explored crocin biosynthesis and accumulation in the fruit of Gardenia jasminoides. HPLC analysis showed that crocins specifically exist in fruit and that the content of crocins increases gradually during fruit development. SMRT sequencing generated 46,715 high-quality full-length isoforms, including 5230 novel isoforms that are not present in the G. jasminoides genome. Furthermore, a total of 46 genes and 91 lncRNAs were involved in the biosynthesis and accumulation of crocin. The qRT-PCR indicated that genes involved in crocin biosynthesis reached a peak in the NOV stage. These findings contributed to our understanding of crocin biosynthesis and accumulation.

Current acoustic modeling methods face problems such as complex processes or inaccurate sound absorption coefficients, etc. Therefore, this paper studies the topic. Firstly, the material samples were prepared, and standing wave tube method experiments were conducted. Material acoustic data were obtained, while a model using improved genetic algorithm and neural network was subsequently proposed. Secondly, the acoustic data obtained from the experiment were analyzed; a neural network structure was designed; and the training, verification, and test data were all divided. In order to facilitate data processing, a symmetrical method was used to inversely normalize all the data. Thirdly, by the design of real coding scheme, fitness function, crossover, and mutation operators, an improved genetic algorithm was proposed to obtain the optimal solution, as the initial weight and threshold, which were then input into the neural network along with the training and verification data. Finally, the test data were input into the trained neural network in order to test the model. The test results and statistical analysis showed that compared with other algorithms, the proposed model has the lower root mean squared error (RMSE) value, the maximum coefficient of determination (R2) value, and shorter convergence time.

Antibiotic contamination has received widespread attention globally. In this work, the oxygen-doped porous graphite carbonitride (g-C3N4) was prepared with urea and ammonium oxalate (CNUC) or urea and glycine (CNUG) as precursors by thermal polymerization. Using bisphenol A (BPA) as a probe and CNUC or CNUG as photocatalysts, the removal performance test was carried out. Meanwhile, all prepared photocatalysts were characterized by XRD, FT-IR, SEM, TEM, XPS, UV-Vis DRS, PL and EIS. Under visible light irradiation, both CNUC and CNUG exhibited about seven and five times greater photocatalytic activity than that of pure g-C3N4, respectively. The radical capture experiments verified that superoxide radicals (•O2−) and holes (h+) were the main active species in the photocatalytic degradation of BPA by CNUC, and the possible photocatalytic mechanism of CNUC was proposed. In addition, all these results indicate that CNUC catalyst can effectually inhibit the photocorrosion and keep superior stability. The proposed technique provides a prospective approach to develop nonmetal-modified photocatalysts for future applications.

A micro-channel distillation device was used for the process intensification method to separate boron isotopes, 10B and 11B. Three-dimensional (3D) printing technology was introduced to manufacture the micro-channel device, which used the chemical exchange method with anisole as the donor to separate the boron isotopes. This device was tested in total reflux mode, and the height of an equivalent theoretical plate of the micro-channel distillation equipment was reduced to 1.56 cm. The accurate control of pressure and temperature, as well as the flow rate of the complex, were factors that affected separation ability. Thus, for process intensification, this micro-channel distillation device can be operated horizontally and connected in series into similar modules to effectively improve separation efficiency and reduce the size of the equipment.