Search

Polyvinylidene fluoride (PVDF) is a very promising material for fabricating flexible infrared sensors due to its ferroelectricity as well as excellent flexibility and low fabrication cost. This work focuses on improving PVDF’s pyroelectric performance by creating microstructures in the film. Simulation results suggest that the pyroelectric response of PVDF film can be improved if micro groove, square-pit or sinusoidal patterns are created on the film surface, with the grooved film showing the best pyroelectric performance. Suggested by the simulation results, flexible PVDF samples with groove structure are prepared by casting the precursor solution on the mold with designed patterns. Measurement results demonstrate that the optimal microstructured PVDF film can improve its pyroelectric performance by as high as 146%, which is in good agreement with the simulations. This work provides an innovative way of achieving flexible infrared sensor devices with promoted performance based on pyroelectric polymers.

K0.5Na0.5NbO3 is considered as one of the most promising lead-free piezoelectric ceramics in the field of wearable electronics because of its excellent piezoelectric properties and environmental friendliness. In this work, the temperature-dependent longitudinal piezoelectric coefficient d33* was investigated in K0.5Na0.5NbO3 single crystals via the Landau–Ginzburg–Devonshire theory. Results show that the piezoelectric anisotropy varies with the temperature and the maximum of d33max* deviates from the polar direction of the ferroelectric phase. In the tetragonal phase, d33maxt* parallels with cubic polarization direction near the tetragonal-cubic transition region, and then gradually switches toward the nonpolar direction with decreasing temperatures. The maximum of d33o* in the orthorhombic phase reveals a distinct varying trend in different crystal planes. As for the rhombohedral phase, slight fluctuation of the maximum of d33r* was observed and delivered a more stable temperature-dependent maximum d33maxr* and its corresponding angle θmax in comparison with tetragonal and orthorhombic phases. This work not only sheds some light on the temperature-dependent phase transitions, but also paves the way for the optimization of piezoelectric properties in piezoelectric materials and devices.

An reduced graphene oxide (RGO) resistive gas sensor was prepared to detect ammonia at room temperature, the result indicated that the desorption of gas (NH 3 ) molecules from a graphene-based sensor was difficult, which lead to a baseline drift. The responses of different concentrations were compared and studied. It was found that both the response rate and its acceleration were affected by the gas concentration. An Intermolecular Forces Based Model was established to explain the adsorption and desorption dynamic response curves. A new method was proposed based on this model. The first and second derivative extrema (FSDE) of the response curve can be attained quickly to calibrate the gas concentrations. The experiment results demonstrated that this new method could eliminate the baseline drift and was capable of increasing the efficiency of gas calibration significantly.

Background: The tumor microenvironment (TME) plays a crucial role in the progression of lung adenocarcinoma (LUAD). However, understanding its dynamic immune and stromal modulation remains a complex challenge. Methods: We utilized the ESTIMATE algorithm to evaluate the immune and stromal components of the LUAD TME from the TCGA database. Correlations between these components and clinical characteristics and patient prognosis were analyzed. Toll-like receptor 7 (TLR7) was identified as a key prognostic biomarker through PPI network and COX regression analysis. Validation of TLR7 expression was conducted using GEO data, qPCR, WB, and IHC. A prognostic model was developed using a nomogram, incorporating TLR7 expression. Enrichment analysis, the Tumor Immune Estimation Resource database, and single-sample gene set enrichment analysis were used to explore TLR7’s potential function. The response of the TLR7 subgroup to immunotherapy and drug sensitivity was observed. Results: We found significant associations between the immune and stromal components of LUAD TME and clinical features and prognosis. Specifically, TLR7 was identified as a prognostic biomarker, where lower expression in tumor tissues was linked to worse outcomes. This finding was further confirmed by comparing TLR7 expression in LUAD cells to normal bronchial epithelial cells, revealing lower expression in the tumor cells. Incorporating TLR7 into a nomogram prognostic model resulted in a good predictor of patient survival. Additionally, TLR7 was associated with immune function and positively correlated with various immune cells. Importantly, patients with high TLR7 expression were more likely to benefit from anti-PD-1 checkpoint blockade therapy. We also identified four treatment candidates for patients with high TLR7 expression. Conclusion: TLR7 is a powerful clinical feature that predicts patient prognosis, immunotherapeutic response, and drug candidates, providing additional insights for the treatment of LUAD.

Background: Since 2019, the SARS-CoV-2 virus has been responsible for the global spread of respiratory illness. As of 1 September 2024, the cumulative number of infections worldwide exceeded 776 million. There are many structural proteins of the virus, among which the SARS-CoV-2 nucleocapsid (N) protein plays a pivotal role in the viral life cycle, participating in a multitude of essential activities following viral invasion. An important antiviral immune response is the major histocompatibility complex (MHC)-restricted differentiation cluster 8 (CD8+) T cell cytotoxicity. Therefore, understanding the immunogenicity of SARS-CoV-2 NP-specific MHC-I-restricted epitopes is highly important. Methods: MHC-I molecules from 11 human leukocyte antigen I (HLA-I) superfamilies with 98% population coverage and 6 mouse H2 alleles were selected. The affinity were screened by IEDB, NetMHCpan, SYFPEITHI, SMMPMBEC and Rankpep. Further immunogenicity and conservative analyses were performed using VaxiJen and BLASTp, respectively. EpiDock was used to simulate molecular docking. Cluster analysis was performed. Selective epitopes were validated by enzyme-linked immunospot (ELISpot) assay and flow cytometry in the mice with pVAX-NPSARS-CoV-2 immunization. Enzyme-Linked Immunosorbent Assay (ELISA) was used to detect whether the preferred epitope induced humoral immunity. Results: There were 64 dominant epitopes for the H-2 haplotype and 238 dominant epitopes for the HLA-I haplotype. Further analysis of immunogenicity and conservation yielded 8 preferred epitopes, and docking simulations were conducted with corresponding MHC-I alleles. The relationships between the NP peptides and MHC-I haplotypes were then determined via two-way hierarchical clustering. ELISA, ELISpot assay, and flow cytometry revealed that the preferred epitope stimulated both humoral and cellular immunity and enhanced cytokine secretion in mice. Conclusions: our study revealed the general patterns among multiple haplotypes within the humans and mice superfamily, providing a comprehensive assessment of the pan-MHC-I immunoreactivity of SARS-CoV-2 NP. Our findings would render prospects for the development and application of epitope-based immunotherapy in lasting viral epidemics.

Marburg hemorrhagic fever (MHF) is a fatal infectious disease caused by Marburg virus (MARV) infection, and MARV has been identified as a priority pathogen for vaccine development by the WHO. The glycoprotein (GP) of MARV mediates viral adhesion and invasion of host cells and therefore can be used as an effective target for vaccine development. Moreover, DNA vaccines have unique advantages, such as simple construction processes, low production costs, and few adverse reactions, but their immunogenicity may decrease due to the poor absorption rate of plasmids. Lysosome-associated membrane protein 1 (LAMP1) can direct antigens to lysosomes and endosomes and has great potential for improving the immunogenicity of nucleic acid vaccines. Therefore, we constructed a DNA vaccine based on a codon-optimized MARV GP (ID MF939097.1) fused with LAMP1 and explored the effect of a LAMP targeting strategy on improving the immunogenicity of the MARV DNA vaccine. ELISA, ELISpot, and flow cytometry revealed that the introduction of LAMP1 into the MARV DNA candidate vaccine improved the humoral and cellular immune response, enhanced the secretion of cytokines, and established long-term immune protection. Transcriptome analysis revealed that the LAMP targeting strategy significantly enriched antigen processing and presentation-related pathways, especially the MHC class II-related pathway, in the candidate vaccine. Our study broadens the strategic vision for enhanced DNA vaccine design and provides a promising candidate vaccine for MHF prevention.

Vaccines has long been the focus of antiviral immunotherapy research. Viral epitopes are thought to be useful biomarkers for immunotherapy (both antibody-based and cellular). In this study, we designed a novel vaccine molecule, the Hantaan virus (HTNV) glycoprotein (GP) tandem Th epitope molecule (named the Gnc molecule), in silico. Subsequently, computer analysis was used to conduct a comprehensive and in-depth study of the various properties of the molecule and its effects as a vaccine molecule in the body. The Gnc molecule was designed for DNA vaccines and optimized with a lysosomal-targeting membrane protein (LAMP) strategy. The effects of GP-derived Th epitopes and multiepitope vaccines were initially verified in animals. Our research has resulted in the design of two vaccines based on effective antiviral immune targets. The effectiveness of molecular therapies has also been preliminarily demonstrated in silico and in laboratory animals, which lays a foundation for the application of a vaccines strategy in the field of antivirals.

(1) Background and Purpose: Ebola virus (EBOV) is the causative agent of Ebola virus disease (EVD), which causes extremely high mortality and widespread epidemics. The only glycoprotein (GP) on the surface of EBOV particles is the key to mediating viral invasion into host cells. DNA vaccines for EBOV are in development, but their effectiveness is unclear. The lack of immune characteristics resides in antigenic MHC class II reactivity. (2) Methods: We selected MHC-II molecules from four human leukocyte antigen II (HLA-II) superfamilies with 98% population coverage and eight mouse H2-I alleles. IEDB, NetMHCIIpan, SYFPEITHI, and Rankpep were used to screen MHC-II-restricted epitopes with high affinity for EBOV GP. Further immunogenicity and conservation analyses were performed using VaxiJen and BLASTp, respectively. EpiDock was used to simulate molecular docking. Cluster analysis and binding affinity analysis of EBOV GP epitopes and selected MHC-II molecules were performed using data from NetMHCIIpan. The selective GP epitopes were verified by the enzyme-linked immunospot (ELISpot) assay using splenocytes of BALB/c (H2d), C3H, and C57 mice after DNA vaccine pVAX-GPEBO immunization. Subsequently, BALB/c mice were immunized with Protein-GPEBO, plasmid pVAX-GPEBO, and pVAX-LAMP/GPEBO, which encoded EBOV GP. The dominant epitopes of BALB/c (H-2-I-AdEd genotype) mice were verified by the enzyme-linked immunospot (ELISpot) assay. It is also used to evaluate and explore the advantages of pVAX-LAMP/GPEBO and the reasons behind them. (3) Results: Thirty-one HLA-II-restricted and 68 H2-I-restricted selective epitopes were confirmed to have high affinity, immunogenicity, and conservation. Nineteen selective epitopes have cross-species reactivity with good performance in MHC-II molecular docking. The ELISpot results showed that pVAX-GPEBO could induce a cellular immune response to the synthesized selective peptides. The better immunoprotection of the DNA vaccines pVAX-LAMP/GPEBO coincides with the enhancement of the MHC class II response. (4) Conclusions: Promising MHC-II-restricted candidate epitopes of EBOV GP were identified in humans and mice, which is of great significance for the development and evaluation of Ebola vaccines.

Food poisoning and infectious diseases caused by Salmonella typhimurium (S. typhimurium) are serious public health concerns for human health and food safety. The diversity and complexity of food matrices pose great challenges for rapid and ultra-sensitive detection of S. typhimurium in food samples. A method capable of identification, detection, and quantification of S. typhimurium is essential for addressing these issues. In this study, aptamer-coated magnetic beads (Apt-MBs) are employed as capture bio-probes to specifically and selectively concentrate S. typhimurium in food samples. A self-priming chip-based digital PCR was then presented as another biosensor for on-site detection and quantification of S. typhimurium cells. The chip we developed was robust and did not require any external power for sample loading. The combination of Apt-MBs with an on-chip digital detection realized the integration into lab-on-a-chip-based biosensors for on-site monitoring of foodborne pathogens. It was possible to capture and detect S. typhimurium cells as low as 90 CFU/reaction with a capture efficiency of 94.5%. Additionally, the whole process only took about 2 h. This unique platform could also be used to monitor other target bacteria with high specificity and sensitivity by utilizing different aptamers. Furthermore, the platform has potential applications in point-of-care testing in the future.