Search

Cemented paste backfill (CPB) technology is widely used for environmental protection and underground goaf treatment. The influences of solid concentration, coarse aggregates dosage, and cement dosage on the rheological properties and compressive strength of CPB blended with coarse aggregates (CA-CPB) are investigated through three-factor and four-level orthogonal experiments. The dynamic shear stress and plastic viscosity are selected to characterize the rheological properties of CA-CPB. The uniaxial compressive strength (UCS) is used to describe the compressive strength. The effect of each factor on rheological properties is different from that on UCS. The most significant influences on rheological properties and UCS are solid concentration and cement dosage, respectively. The optimal levels of each factor for rheological properties and UCS are different, resulting in different optimal combinations obtained through range analysis. Therefore, the overall desirability function approach is employed to perform multiple response optimization. The optimal parameters for high fluidity and strength obtained provide valuable information for the CA-CPB process in the Chifeng Baiyinnuoer Lead and Zinc Mine.

To study the mechanism of reverse percolation and drainage of unclassified tailings, improve the disposal concentration of tailings and solve the bottleneck in the development of filling technology, this study performed semi-industrial flocculation and sedimentation tests using macroscopic continuous thickener tests and a self-developed continuous thickener test platform to observe the evolution pattern and formation mechanism of unclassified tailings flocs. Then, in situ sampling was performed on the compressed thickener zone of tailings at the bottom of the bed with the help of industrial CT scanning tests and 3D images. Avizo software was used to establish the seepage channels and construct an evolutionary model to analyze the effect of tailings dewatering and concentration on tailings concentration from a microscopic perspective. The study shows that the distribution of seepage channels is closely related to the height of the bed. As the bed height increases, the bed concentration increases; shear has a significant effect on the water flow inside the pore space. After shear, the water between the sample pores has been discharged. Therefore, the flow rate is relatively slow. Shear produces pressure and tension effects, breaking the static equilibrium between flocs and water forming seepage channels. Shear can effectively break the floc structure and release the water so that the mutual position between flocs and water constantly changes, The concentration of the tailings bed is increased.

Shear-induced polymer-bridging flocculation is widely used in the solid–liquid separation process in cemented paste backfill, beneficial to water recycling and tailings management in metal mines. A flocculation kinetics model based on Population Balance Model (PBM) is proposed to model the polymer-bridging flocculation process of total tailings. The PBM leads to a system of ordinary differential equations describing the evolution of the size distribution, and incorporates an aggregation kernel and a breakage kernel. In the aggregation kernel, a collision frequency model describes the particle collision under the combined effects of Brownian motions, shear flow, and differential sedimentation. A semi-empirical collision efficiency model with three fitting parameters is applied. In the breakage kernel, a new breakage rate coefficient model with another three fitting parameters is introduced. Values of the six fitting parameters are determined by minimizing the difference between experimental data obtained from FBRM and modeling result through particle swarm global optimization. All of the six fitting parameters vary with flocculation conditions. The six fitting parameters are regressed with the flocculation factors with six regression models obtained. The validation modeling demonstrates that the proposed PBM quantifies well the dynamic evolution of the floc size during flocculation under the given experimental setup. The investigation will provide significant new insights into the flocculation kinetics of total tailings and lay a foundation for studying the performance of the feedwell of a gravity thickener.

Adding basalt fiber into concrete can significantly improve its mechanical properties. In order to explore the influence of basalt fiber content on the uniaxial compressive strength and splitting tensile strength of concrete and the mechanism of fiber action, this paper conducts compressive and splitting tensile tests on three kinds of basalt fiber concrete specimens with different fiber content and obtains the relationship between the macro mechanical properties and the fiber content. At the same time, with the help of CT scanning equipment and digital image processing technology, the microstructure of basalt fiber concrete with three groups of fiber content is reconstructed, and the pore, crack, and fiber distribution are quantitatively described using the calculation and processing function of the Avizo reconstruction software. The results show that when the optimal fiber content is 3 kg/m3, the improvement rates of uniaxial compressive strength and splitting tensile strength are 31.9% and 23.7%, respectively. The network structure formed by fiber in concrete has the best compactness and the least number of pores, with an average sphericity of 0.89 and an average pore volume of 20.26 μm3. Through analysis, it was found that the initial defects of basalt fiber concrete exist in the form of pores, and the addition of basalt fiber will destroy the large pore size of concrete, change the pore size distribution, and increase the average sphericity; The distribution of the fiber in the concrete is a three-dimensional network, and the distribution of the fiber in the initial defect distribution area is parallel to the direction of pore arrangement.