Search

Corn ( Zea mays ) is the most widely planted crop in the world. Dalbulus maidis (Hemiptera: Cicadellidae) is currently a primary corn pest. The starting point for the development of pest control decision-making systems is the determination of a conventional sampling plan. Therefore, this study aimed to determine a practical conventional sampling plan for D. maidis in corn crops. Insect density was evaluated in 28 commercial fields. Subsequently, D. maidis densities were sampled from fields ranging from 1 to 100 ha. Insect density conformed to a negative binomial distribution in 89.29% of the fields. The insect densities determined using the sampling plan had a low error rate (up to 15%). Sampling time and costs ranged from 2.06 to 39.45 min/ha and 0.09 to 1.81 USD/ha for fields of 1-100 ha, respectively. These results provide the first precise and representative conventional sampling plan for scouting D. maidis adults grown in corn fields. Therefore, the conventional sampling plan for D. maidis determined in this study is practical and can be incorporated into integrated pest management programs for corn crops owing to its representativeness, precision, speed, and low cost.

The uterine tube extracellular matrix is a key component that regulates tubal tissue physiology, and it has a region-specific structural distribution, which is directly associated to its functions. Considering this, the application of biological matrices in culture systems is an interesting strategy to develop biomimetic tubal microenvironments and enhance their complexity. However, there are no established protocols to produce tubal biological matrices that consider the organ morphophysiology for such applications. Therefore, this study aimed to establish region-specific protocols to obtain decellularized scaffolds derived from porcine infundibulum, ampulla, and isthmus to provide suitable sources of biomaterials for tissue-engineering approaches. Porcine uterine tubes were decellularized in solutions of 0.1% SDS and 0.5% Triton X-100. The decellularization efficiency was evaluated by DAPI staining and DNA quantification. We analyzed the ECM composition and structure by optical and scanning electronic microscopy, FTIR, and Raman spectroscopy. DNA and DAPI assays validated the decellularization, presenting a significative reduction in cellular content. Structural and spectroscopy analyses revealed that the produced scaffolds remained well structured and with the ECM composition preserved. YS and HEK293 cells were used to attest cytocompatibility, allowing high cell viability rates and successful interaction with the scaffolds. These results suggest that such matrices are applicable for future biotechnological approaches in the reproductive field.

Leucoptera coffeella (Lepidoptera: Lyonetiidae) is one of the main pests in coffee crops. The economic injury level (EIL) is the lowest density of the pest at which economic damages match the costs of control measures. The economic threshold (ET) is the density of the pest at which control measures must be taken so that this population does not reach the EIL. These are the main indices used for pest control decision-making. Control of L. coffeella is carried out by manual, tractor, airplane or drone applications. This work aimed to determine EILs and ETs for L. coffeella as a function of insecticide application technology in conventional and organic Coffea arabica crops. Data were collected over five years in commercial C. arabica crops on seven 100 ha central pivots. The cost of control in organic crops was 16.98% higher than conventional. The decreasing order of control cost was manual > drone > airplane > tractor application. Coffee plants were tolerant to low densities (up to 15% mined leaves) of the pest that caused losses of up to 6.56%. At high pest densities (54.20% mined leaves), losses were high (85.62%). In organic and conventional crops and with the use of different insecticide application technologies, EIL and ET were similar. The EIL and ET were 14% and 11% of mined leaves, respectively. Therefore, these indices can be incorporated in integrated pest management programs in C. arabica crops. The indices determined as a function of insecticide application technology in organic and conventional coffee are important as they serve producers with different technological levels. Additionally, EILs and ETs can contribute to more sustainable production, as control methods will only be employed when the pest density reaches these indices., Competing Interests: The authors declare no conflicts of interest. The funders had no role in the design of the study; in the collection, analyses or interpretation of data; in the writing of the manuscript or in the decision to publish the results.

The citrus blackfly (CBF), Aleurocanthus woglumi Ashby, is an exotic pest native to Southeast Asia that has spread rapidly to the world's main centers of citrus production, having been recently introduced to Brazil. In this study, a maximum entropy niche model (MaxEnt) was used to predict the potential worldwide distribution of CBF under current and future climate change scenarios for 2030 and 2050. These future scenarios came from the Coupled Model Intercomparison Project Phase 6 (CMIP6), SSP1-2.6, and SSP5-8.5. The MaxEnt model predicted the potential distribution of CBF with area under receiver operator curve (AUC) values of 0.953 and 0.930 in the initial and final models, respectively. The average temperature of the coldest quarter months, precipitation of the rainiest month, isothermality, and precipitation of the driest month were the strongest predictors of CBF distribution, with contributions of 36.7%, 14.7%, 13.2%, and 10.2%, respectively. The model based on the current time conditions predicted that suitable areas for the potential occurrence of CBF, including countries such as Brazil, China, the European Union, the USA, Egypt, Turkey, and Morocco, are located in tropical and subtropical regions. Models from SSP1-2.6 (2030 and 2050) and SSP5-8.5 (2030) predicted that suitable habitats for CBF are increasing dramatically worldwide under future climate change scenarios, particularly in areas located in the southern US, southern Europe, North Africa, South China, and part of Australia. On the other hand, the SSP5-8.5 model of 2050 indicated a great retraction of the areas suitable for CBF located in the tropical region, with an emphasis on countries such as Brazil, Colombia, Venezuela, and India. In general, the CMIP6 models predicted greater risks of invasion and dissemination of CBF until 2030 and 2050 in the southern regions of the USA, European Union, and China, which are some of the world's largest orange producers. Knowledge of the current situation and future propagation paths of the pest serve as tools to improve the strategic government policies employed in CBF's regulation, commercialization, inspection, combat, and phytosanitary management.

Tracheal replacement with a bioengineered tracheal substitute has been developed for long-segment tracheal diseases. The decellularized tracheal scaffold is an alternative for cell seeding. It is not defined if the storage scaffold produces changes in the scaffold's biomechanical properties. We tested three protocols for porcine tracheal scaffold preservation immersed in PBS and alcohol 70%, in the fridge and under cryopreservation. Ninety-six porcine tracheas (12 in natura, 84 decellularized) were divided into three groups (PBS, alcohol, and cryopreservation). Twelve tracheas were analyzed after three and six months. The assessment included residual DNA, cytotoxicity, collagen contents, and mechanical properties. Decellularization increased the maximum load and stress in the longitudinal axis and decreased the maximum load in the transverse axis. The decellularization of the porcine trachea produced structurally viable scaffolds, with a preserved collagen matrix suitable for further bioengineering. Despite the cyclic washings, the scaffolds remained cytotoxic. The comparison of the storage protocols (PBS at 4 °C, alcohol at 4 °C, and slow cooling cryopreservation with cryoprotectants) showed no significant differences in the amount of collagen and in the biomechanical properties of the scaffolds. Storage in PBS solution at 4 °C for six months did not change the scaffold mechanics.

Urochloa panicoides P. Beauv. is considered one of the most harmful weeds in the United States and Australia. It is invasive in Pakistan, Mexico, and Brazil, but its occurrence is hardly reported in China and European countries. Species distribution models enable the measurement of the impact of climate change on plant growth, allowing for risk analysis, effective management, and invasion prevention. The objective of this study was to develop current and future climate models of suitable locations for U. panicoides and to determine the most influential climatic parameters. Occurrence data and biological information on U. panicoides were collected, and climatic parameters were used to generate the Ecoclimatic Index (EI) and to perform sensitivity analysis. The future projections for 2050, 2080, and 2100 were modeled under the A2 SRES scenario using the Global Climate Model, CSIRO-Mk3.0 (CS). The potential distribution of U. panicoides coincided with the data collected, and the reliability of the final model was demonstrated. The generated model identified regions where the occurrence was favorable, despite few records of the species. Sensitivity analysis showed that the most sensitive parameters of the model were related to temperature, humidity, and cold stress. Future projections predict reductions in climate suitability for U. panicoides in Brazil, Australia, India, and Africa, and an increase in suitability in Mexico, the United States, European countries, and China. The rise in suitability of China and Europe is attributed to predicted climate change, including reduction in cold stress. From the results obtained, preventive management strategies can be formulated against the spread of U. panicoides , avoiding economic and biodiversity losses.

The effect of bovine serum albumin (BSA) upon interaction between CdTe QD functionalized by 3-Mercaptopropionic Acid (CdTe-3-MPA QD) and two water soluble porphyrins: positively charged meso -tetra methyl pyridyl porphyrin (TMPyP) and negatively charged meso -tetrakis(p-sulfonato-phenyl) porphyrin (TPPS 4 ), was studied in function of pH using the steady-state and time resolved optical absorption and fluorescence spectroscopies. It was shown that, depending on the charge state of the components, interaction with albumin could either prevent the formation of the QD…PPh complex, form a mixed QD…PPh…BSA complex or not affect PPh complexation with QD at all. The obtained results may be of interest for application in photomedicine.