Search

In this work, for the first time, the sorption behaviour of platinum and palladium on polyethylene microplastics (PE-MP) was studied. To simulate natural conditions, part of PE-MP was subjected to the ageing process in lake water under the influence of solar radiation. The original and aged PE-MP was characterised using elemental analysis, FT-IR, SEM-EDX, and nitrogen porosimetry methods. The studies on Pt and Pd sorption on PE-MP were carried out in batch mode in natural lake water at pH 7.6. It was found that the ageing process led to the degradation of the surface of the PE-MP and the formation of a biofilm. The sorption process of Pt and Pd on PE-MP particles proceeds according to pseudo-second-order kinetics. A good fit of the experimental data to the Freundlich and Langmuir isotherm model indicates the mixed nature of Pt and Pd sorption on PE-MP. It was clearly indicated that Pt and Pd sorption from natural waters can occur on the surface of inert polyethylene particles, which can lead to the preconcentration of these elements, even from waters with a very low content, and transferring them over longer distances. This poses a threat to the health of living organisms and humans.

This study investigates the applicability of the Peleg model to the osmotic dehydration of various sweet potato variety samples in sugar beet molasses, addressing a notable gap in the existing literature. The osmotic dehydration was performed using an 80% sugar beet molasses solution at temperatures of 20 °C, 35 °C, and 50 °C for periods of 1, 3, and 5 h. The sample-to-solution ratio was 1:5. The objectives encompassed evaluating the Peleg equation’s suitability for modeling mass transfer during osmotic dehydration and determining equilibrium water and solid contents at various temperatures. With its modified equation, the Peleg model accurately described water loss and solid gain dynamics during osmotic treatment, as evidenced by a high coefficient of determination value (r2) ranging from 0.990 to 1.000. Analysis of Peleg constants revealed temperature and concentration dependencies, aligning with previous observations. The Guggenheim, Anderson, and de Boer (GAB) model was employed to characterize sorption isotherms, yielding coefficients comparable to prior studies. Effective moisture diffusivity and activation energy calculations further elucidated the drying kinetics, with effective moisture diffusivity values ranging from 1.85 × 10−8 to 4.83 × 10−8 m2/s and activation energy between 7.096 and 16.652 kJ/mol. These findings contribute to understanding the complex kinetics of osmotic dehydration and provide insights into the modeling and optimization of dehydration processes for sweet potato samples, with implications for food processing and preservation methodologies.

Sustainable methods such as convective drying have regained interest in reducing the loss and waste of food produce. Combined with techniques like blanching and edible coatings, they could serve as useful tools in food processing development. Composite coatings comprising pectin, soy protein isolate, and xanthan gum were optimized using response surface methodology with the Box–Behnken design. This optimization aimed to investigate their effects on the moisture content, water activity, total color, and rehydration ratio of fresh and blanched chayote slices. Additionally, the study explored the modeling of the drying kinetics and sorption isotherms of chayote (Sechium edule) slices. Soy protein and xanthan gum were found to primarily influence the moisture content (ranging from 5.44% to 9.93%), and pectin influenced water activity (033 to 0.53) of the fresh-coated chayote, while pectin affected the aw (2.13–8.28) and rehydration of the blanch-coated chayote. The optimized formulations for both fresh and blanched chayote were utilized to assess the drying kinetics behavior and sorption isotherms. The best fit (R2: 0.996 to 0.999) was achieved with the parabolic model for thin-layer materials. Furthermore, the sorption isotherms of chayote displayed a Type IV behavior, with the BET model being the most suitable for describing the sorption behavior of materials with low water activity. The predicted values offer valuable data for optimizing processing conditions to enhance the quality and stability of dried chayote.

Agglomeration is a technological process that is widely applied to obtain powdered products with the appropriate shape and particle size and different physical characteristics and stabilities. The purpose of this research was to study the influences of the composition and storage of powdered infant formulas on their thermal behaviours, as analysed by differential scanning calorimetry (DSC); fatty acid compositions, as determined by gas chromatography; and water activity and water content. This study investigated the influence of the storage time (six months) at temperatures of 20–22 °C and air humidities of 42–45% on powder mixtures and agglomerates. The isotherms of the agglomerates presented a shape and course similar to those of the isotherms of the mixtures from which they were obtained. The agglomeration process affected the stability of the fatty acids in the stored powdered infant formulas. The composition of the fatty acids changed during the storage process. The thermal properties of the powdered infant formulas were not significantly influenced by agglomeration. The compositions of the mixtures and agglomerates influenced the shape and course of the DSC diagrams. Using the DSC method, it was determined whether the fat was a natural component of the powder or it was added in the form of fatty acid preparations. Differences were observed between the shape and course of the DSC curves (heating and cooling) obtained for fresh and 6-month-stored mixtures and agglomerates.

The effect of organic matter (OM) on soil phosphorus (P) sorption is controversial, as there is still no clear answer whether organic matter inhibits or increases P sorption. Despite the great need for renewable sources of available P and OM in agricultural soils, little is known about the interaction between P and dissolved organic matter (DOM) in natural soil systems. The aim of this research was to uncover if and how soil saturation with DOM derived from different types of abundant agricultural wastes (cattle manure, horse manure, biogas digestate, compost) affects the phosphate sorption. We examined the P sorption process in control and DOM-saturated sandy soils. The results indicated that OM introduced with agricultural waste did not always reduce P sorption, but certainly had an effect on impairing P fixation, and thus, may result in potentially greater P mobility in the soil, including P availability. Among these waste materials, DOM from horse manure had the most positive effect on P mobilization; thus, horse manure—if available—is recommended for spreading on soils with low P mobility.

In this study, sorption distribution coefficients were determined for 71 pharmaceuticals, aiming to describe their sorption behavior to powder activated carbon (PAC). The data are expected to be applied when designing and upgrading wastewater treatment plants (WWTP) for improved removal of pharmaceuticals by applying sorption to PAC as an additional removal technique. Sorption isotherms were determined for the pharmaceuticals over a concentration interval covering a wide range from 0.08 to 10 µg/L using PAC at a concentration of 10 mg/L. The best fitted sorption isotherms were used to calculate the distribution coefficients (Kd) and these were applied to estimate that the PAC doses needed to achieve a target concentration of 10 ng/L in the effluent. A target concentration was used since neither discharge limit values nor environmental quality standards in general have been defined for these compounds. Using a %-removal approach does not guarantee achievement of concentrations low enough to protect the water ecosystems. Some of the pharmaceuticals will be reduced by the addition of small amounts of PAC. Examples are atenolol, carbamazepine, citalopram, codeine, fluoxetine and ibuprofen. For others, e.g., oxazepam, an alternative treatment has to be considered since the requested dose is too high to be realistic for a target concentration of 10 ng/L.

Heavy metal exposure from wastewater is an important environmental issue worldwide. In the search for more efficient treatment technologies, biosorption has been presented as an alternative for contaminant removal from wastewaters. The aim of this work is to determine the operation parameters of copper adsorption followed by biosorbent regeneration. The algae Durvillaea antarctica and Lessonia trabeculata were used as biosorbents in batch experiments. These biosorbents were exposed to different conditions, such as pH, copper concentration, exposure time, mass-to-volume ratios and regeneration reagents. Batch sorption tests revealed an adequate pH of 4.5–5.0. The selected biosorbent was D. antarctica due to a considerably higher copper retention capacity. As a regenerating reagent, sulfuric acid was more efficient. For diluted copper solutions (10 to 100 mg L−1), a biosorbent particle size of between 1.70 and 3.36 mm showed better retention capacity than larger particles and a biosorbent mass-to-volume ratio of 10 g L−1 was desirable for these metal concentrations.

Water absorption capacity is a key characteristic of cellulosic pulps used for different commodities. This property is influenced by the affinity of the pulp fiber surface with water, chemical composition of the pulp, morphology, and organization of fibers in the network. In this study, surface properties of six industrial Eucalyptus bleached kraft pulps (fluff pulps) dry-defiberized in a Hammermill, which were obtained by wood pulping and pulp bleaching under different production conditions, were studied while employing dynamic water vapor sorption and contact angles measurements. The absorption properties of air-laid pulp pads were analyzed following the absorbency testing procedure and the relationship between these properties and pulp’s chemical composition and fiber network structure were assessed by multivariate analysis. The results showed that the accessibility of the fiber surface is related to the reduction of the contact angles, but, at the same time, to the longer absorption time and less absorption capacity of the fiber network. Therefore, the absorption properties of the pulps are not necessarily directly related to their surface properties. Indeed, absorptivity is related to the surface chemical composition, fiber morphology, and fiber network structure. Thus, surface carboxylic groups promote total water uptake, resulting in better absorption capacity. Greater fiber coarseness and deformations (curl and kink) provide a less wettable surface, but a more porous network with higher specific volume, resulting in more absorbent air-laid formulations.

The development of new materials based on biopolymers (as renewable resources) is substantial for environmental challenges in the heavy metal and radionuclide ions removal contaminations. Functionalization of chitosan with sulfonic groups was achieved for improving the uranium sorption, not only from slightly acidic leachate, but also for the underground water. The prepared hydrogel based on chitosan was characterized by series of analysis tools for structure elucidation as FTIR spectroscopy, textural properties using nitrogen adsorption method, pHPZC (by pH-drift method), thermogravimetric analysis (TGA), SEM, and SEM-EDX analyses. The sorption was performed toward uranium (VI) ions for adjustment of sorption performances. The optimum sorption was performed at pH 4 (prior to the precipitation pH). The total sorption was achieved within 25 min (relatively fast kinetics) and was fitted by pseudo-first order rate equation (PFORE) and resistance to intraparticle diffusion equation (RIDE). The maximum sorption capacity was around 1.5 mmol U g−1. The sorption isotherms were fitted by Langmuir and Sips equations. Desorption was achieved using 0.3 M HCl solution and the complete desorption was performed in around 15 min of contact. The sorption desorption cycles are relatively stable during 5 cycles with limit decreasing in sorption and desorption properties (around 3 ± 0.2% and 99.8 ± 0.1%, respectively). The sorbent was used for removal of U from acid leachate solution in mining area. The sorbent showed a highly performance for U(VI) removal, which was considered as a tool material for radionuclides removing from aquatic medium.

To reduce the energy consumption during the drying of agricultural and food products, the optimization of the drying process with regard to the drying behavior and the quality of the end products is necessary. Therefore, much effort is spent designing and developing dryers to study the drying behavior of a wide range of products. This often results in a trade-off between measurement accuracy and the sufficient production of dried material required for the product quality analysis. Therefore, a laboratory dryer was developed consisting of three high-precision drying columns, each able to process 600 g of sample mass, and a flatbed dryer that can be loaded with 20 kg of fresh product. Drying curves could be recorded simultaneously by electronic balances in the three precision dryers and the flatbed dryer. The high-precision laboratory dryer HPD TF3+ proved to be suitable for establishing drying curves for a defined temperature, rel. humidity and velocity of the drying air.

Powders based on plant raw materials have low storage stability due to their sorption and thermal properties and generate problems during processing. Therefore, there is a need to find carrier agents to improve their storage life as well as methods to evaluate their properties during storage. Water adsorption isotherms and thermal characteristics of the pumpkin powder with various inulin additions were investigated in order to develop state diagrams. Differential scanning calorimetry (DSC) was used to obtained glass transition lines, freezing curves and maximal-freeze-concentration conditions. The glass transition lines were developed using the Gordon–Taylor model. Freezing data were modeled employing the Clausius–Clapeyron equation and its development–Chen model. The glass transition temperature of anhydrous material (Tgs) and characteristic glass transition temperature of maximum-freeze-concentration (Tg′) increased with growing inulin additions. Sorption isotherms of the powders were determined at 25 °C by the static-gravimetric method and the experimental data was modeled with four different mathematical models. The Peleg model was the most adequate to describe the sorption data of the pumpkin–inulin powders. Guggenheim-Anderson-de Boer (GAB) monolayer capacity decreased with increasing inulin concentration in the sample.

The aim of this study was to determine the effect of incorporation of apple puree and maltodextrin to agar sol on the sorption properties and structure of the dried gel. The effect of different drying methods on the sorption behaviour of aerated apple puree gels was also observed. The gels with the addition of 25% and 40% concentration of apple puree and with or without maltodextrin were prepared and dried. The foamed agar gel was subjected to freeze-drying, air-drying and vacuum-drying. The sorption properties of dried gels (adsorption isotherms, water uptake in time) were investigated. The relations between the glass transition temperature, water activity and water content were also obtained for some apple snacks. The increase in apple puree in freeze-dried gels increased the hygroscopicity and decreased the glass transition temperature (Tg). The water content at given activity and hygroscopicity were reduced by the addition of maltodextrin, which also caused the increase in Tg. The application of different drying methods enabled obtaining different structures of material. The open-pore, fragile materials were obtained by freeze-drying, the expanded matrix with big holes was characteristic for vacuum-dried gels, but the closed pores with thick walls were created during the air-drying.

With the target of recovering rare earth elements (REEs) from acidic leachates, a new functionalized hydrogel was designed, based on the phosphorylation of algal/polyethyleneimine beads. The functionalization strongly increased the sorption efficiency of the raw material for Pr(III) and Tm(III). Diverse techniques were used for characterizing this new material and correlating the sorption performances and mechanisms to the physicochemical structure of the sorbent. First, the work characterized the sorption properties from synthetic solutions with the usual procedures (study of pH effect, uptake kinetics, sorption isotherms, metal desorption and sorbent recycling, and selectivity from multi-element solutions). Optimum pH was found close to 5; sorption isotherms were fitted by the Langmuir equation (maximum sorption capacities close to 2.14 mmol Pr g−1 and 1.57 mmol Tm g−1). Fast uptake kinetics were modeled by the pseudo-second order rate equation. The sorbent was highly selective for REEs against alkali-earth and base metals. The sorbent was remarkably stable for sorption and desorption operation (using 0.2 M HCl/0.5 M CaCl2 solutions). The sorbent was successfully applied to the leachates of Egyptian ore (pug leaching) after a series of pre-treatments (precipitation steps), sorption, and elution. The selective precipitation of REEs using oxalic acid allows for the recovery of a pure REE precipitate.

The strong demand for rare-earth elements (REEs) is driven by their wide use in high-tech devices. New processes have to be developed for valorizing low-grade ores or alternative metal sources (such as wastes and spent materials). The present work contributed to the development of new sorbents for the recovery of rare earth ions from aqueous solutions. Functionalized mesoporous silica composite was synthesized by grafting diethylenetriamine onto composite support. The physical and chemical properties of the new sorbent are characterized using BET, TGA, elemental analysis, titration, FTIR, and XPS spectroscopies to identify the reactive groups (amine groups: 3.25 mmol N g−1 and 3.41 by EA and titration, respectively) and their mode of interaction with Nd(III) and Gd(III). The sorption capacity at the optimum pH (i.e., 4) reaches 0.9 mmol Nd g−1 and 1 mmol Gd g−1. Uptake kinetics are modeled by the pseudo-first-order rate equation (equilibrium time: 30–40 min). At pH close to 4–5, the sorbent shows high selectivity for rare-earth elements against alkali-earth elements. This selectivity is confirmed by the efficient recovery of REEs from acidic leachates of gibbsite ore. After elution (using 0.5 M HCl solutions), selective precipitation (using oxalate solutions), and calcination, pure rare earth oxides were obtained. The sorbent shows promising perspective due to its high and fast sorption properties for REEs, good recycling, and high selectivity.

The aim of this study was to investigate selected physical and biochemical properties of four vegetable freeze-dried soups. The water content, water activity, pH, color parameters, antioxidant activity (EC50), total polyphenolic content of fresh tomato, pumpkin, beetroot, and cucumber, and freeze-dried soups were measured. Sensory analysis was applied to compare sensory attributes of fresh and rehydrated soups. The sorption isotherms of freeze-dried soups were obtained with the application of the static and dynamic vapor sorption (DVS) method. The application of the freeze-drying method enabled the obtaining of dry soups with a low water content of 2–3%. The drying caused a significant change of color of all soups. The redness of soups decreased after drying for the beetroot soups from +39.64 to +21.91. The lower chroma value of 25.98 and the highest total color change ΔE*ab = 36.74 were noted for freeze-dried beetroot soup. The antioxidation activity and total polyphenolic content were reduced after drying, especially for the cucumber and tomato soups. The Peleg model was selected to describe the sorption isotherms of dried soups. The sorption isotherm of freeze-dried cucumber and beetroot soups had a sigmoidal shape of type II. The shape of the moisture sorption isotherm for freeze-dried tomato and pumpkin soups corresponded more with type III isotherms. The DVS method can be used to characterize the moisture sorption isotherms of freeze-dried products.

Experimental and mathematical modeling of the moisture sorption isotherms for biomass pellets during storage is performed in this study. The tested pellets are a mixture of 50% wood: spruce or pine, and 50% switchgrass agricultural biomass. Storage conditions, i.e., temperature and humidity, are tested by varying the environment conditions in a conditioning chamber. The experimental results show that the moisture sorption isotherms are not affected by the temperature. Nevertheless, the equilibrium moisture content depends on the kind of the tested pellets. Mathematical modeling of the experimental isotherms is performed using four common models: the Oswin, GAB, Henderson and Peleg models. The Oswin model is defined as the most appropriate model to predict the moisture sorption isotherms of the spruce–switchgrass pellets. It presents a coefficient of determination equal to 0.998, a standard error around 0.049 and a chi-square approaching 0.007. On the other hand, Henderson and GAB models show the best results for pine–switchgrass pellets, with a coefficient of determination varying between 0.998 and 0.997, a standard error range 0.054–0.065 and chi-square error between 0.008 and 0.009. The thermodynamic properties, which include the net isosteric of heat and the entropy changes of sorption, are also determined for all tested samples.

Cysteine-functionalized chitosan magnetic nano-based particles were synthesized for the sorption of light and heavy rare earth (RE) metal ions (La(III), Nd(III) and Yb(III)). The structural, surface, and magnetic properties of nano-sized sorbent were investigated by elemental analysis, FTIR, XRD, TEM and VSM (vibrating sample magnetometry). Experimental data show that the pseudo second-order rate equation fits the kinetic profiles well, while sorption isotherms are described by the Langmuir model. Thermodynamic constants (ΔG°, ΔH°) demonstrate the spontaneous and endothermic nature of sorption. Yb(III) (heavy RE) was selectively sorbed while light RE metal ions La(III) and Nd(III) were concentrated/enriched in the solution. Cationic species RE(III) in aqueous solution can be adsorbed by the combination of chelating and anion-exchange mechanisms. The sorbent can be efficiently regenerated using acidified thiourea.

Sorption isotherm is an essential property for the processing of biological materials. In this study, a component model for the prediction of the sorption isotherm was evaluated. In order to validate this component model, the moisture sorption isotherms for Chrysanthemum morifolium flowers and the orchid Anoectochilus formosanus Hayata were determined. The sorption isotherm was measured by using the equilibrium relative humidity technique for five temperatures. Seven sorption isotherm models were selected with four quantitative criteria and residual plots to evaluate fitting ability and prediction performance for these products. The results indicated that the sorption temperature did not significantly affect the adsorption isotherm. The Caurie and Henderson equations could be used for C. morifolium flowers and A. formosanus Hayata. The isotherm data of raw bamboo, elecampe and three varieties of corn kernels from the literature were adopted to validate the component model. Comparing with the predicted values of component values and actual isotherm moisture, the component model has good predictive ability at the aw range smaller than 0.7. Considering the practical application, the aw range below 0.7 is the main range for the processing of agricultural products, and the predictive values of this component model could be helpful for food engineering and for the food industry.