Search

The global demand for mineral resources has led to the gradual transformation of the mining industry from the traditional shallow, small-scale mining mode to the high-intensity mining of deep underground mines. Due to the high stress, high temperature, high permeability, and easy disturbance of deep mines, new challenges have been brought to the mining of materials. Some scholars have improved the thermal insulation performance of concrete by adding low thermal conductivity materials such as ceramsite, shell, and natural fiber to traditional shotcrete, but there are still high costs, insufficient support strength, and unsatisfactory thermal insulation effects. Given the background related to the fact that it is still not possible to fully recycle the large amount of solid waste generated by mining activities, this paper, with traditional shotcrete as its basis, uses coal fly ash to replace part of the cement and tailings to replace part of the sand and gravel aggregate. In addition, it adds basalt fiber to reduce thermal conductivity and restore strength. An orthogonal experiment of three factors and three levels was designed to explore a new type of solid waste-based thermal insulation support shotcrete material. Through the testing and analysis of the mechanical and thermal properties of the specimens, it was concluded that the optimal ratio of the materials was 45% fly ash, 50% tailings, and 25% basalt fiber (the percentage of the total mass of fly ash and cement). The compressive strength of the specimens after curing for 28 days could reach 16.26 MPa, and the thermal conductivity and apparent density were 0.228561 W/(m·k) and 1544.00 kg/m3, respectively. By using COMSOL Multiphysics multi-physics coupling software to analyze the coupling of the stress field and temperature field, it was concluded that the optimum thickness of the thermal insulation layer of this material was 150 mm. The field application in a mine in Shandong Province proved that it met the effects of thermal insulation (the ability to isolate heat conduction) and support. The successful trial of this material provides a new idea for the solving of the problem of heat damage and solid waste utilization in deep mines, which has a certain practical significance.

We report that, for the first time, a low-temperature GaN (LT-GaN) layer prepared by metal–organic chemical vapor deposition (MOCVD) regrowth was used as a Mg stopping layer (MSL) for a GaN trench current–aperture vertical electron transistor (CAVET) with p-GaN as a carrier blocking layer (CBL). Inserting LT-GaN on top of the p-GaN effectively suppresses Mg out-diffusion into the regrown AlGaN/GaN channel, contributing to the high current capability of GaN vertical devices with a p-GaN CBL. With different MOCVD growth conditions, MSLs inserted in trench CAVETs were comprehensively investigated for the influence of MSL regrowth temperature and thickness on device performance. With the best on-state current performance obtained in this study, the trench CAVET with a 100 nm thick MSL regrown at 750 °C shows a high drain current of 3.2 kA/cm2 and a low on-state resistance of 1.2 mΩ∙cm2. The secondary ion mass spectrometry (SIMS) depth profiles show that the trench CAVET with the 100 nm thick MSL regrown at 750 °C has a dramatically decreased Mg diffusion decay rate (~39 nm/decade) in AlGaN/GaN channel, compared to that of the CAVET without a MSL (~104 nm/decade). In developing GaN vertical devices embedded with a Mg-doped p-type layer, the LT-GaN as the MSL demonstrates a promising approach to effectively isolate Mg from the subsequently grown layers.

Long-term monocultures of tea and the excessive use of chemical fertilizer lead to the degradation of soil quality. Improving the soil quality of ex-tea plantations through vegetation restoration is an important task. However, the changes in soil nutrients, fungal communities, and the effects of microorganisms on soil nutrients after reforestation remain unclear. Therefore, in this study, we aimed to explore the effects of Pinus and Chinese fir on soil nutrients and fungal communities in ex-tea plantation areas that were subjected to the reforestation modes of pure forest and mixed forest by measuring soil chemical properties and ITS rRNA gene sequences. The results showed that (1) after reforestation, the relative normalized difference vegetation index (NDVI) of the Mixed forest, Mixed Pine and Mixed Fir areas increased (p < 0.05) compared to that of pure forest; (2) the soil organic carbon (SOC), total nitrogen (TN), and N:P ratios of the mixed forest increased by an average of 54%, 90%, and 299% (p < 0.05) compared to pure forest, whereas the total phosphorus (TP) and available potassium (AK) decreased by an average of 39% and 89% (p < 0.05); and (3) there was no significant difference in the diversity of the fungal communities of the pure and mixed forests, but the fungal phyla Mucoromycota, Glomeromycota, and Rozellomycota were significantly different in the pure and mixed forests. This differing microbial composition led to a significant increase (p < 0.05) in symbiotrophs (ecotomycorhizal, ericoid mycorhizal) in the mixed forest, which was negatively correlated with the soil TP and positively correlated with the TN and the N:P ratio. In addition, there was also a significant decrease (p < 0.05) in complex nutrient types (ectomycorrhizal-fungal parasite-plant saprotroph-wood saprotroph), which were negatively correlated with the SOC and TN, and arbuscular mycorrhizas, which were positively correlated with the TP. Our results show that the chemical properties of soils and the structure of the fungal communities changed significantly due to the reforestation of Chinese fir and Pinus, and the mixed forest mode of reforestation was more conducive to improving the soil quality; therefore, a mixed forest of Chinese fir and Pinus can be used to improve degraded soils in ex-tea planting areas.

Background: This study aimed to estimate the impact of the COVID-19 lockdown on fitness performance among Chinese college men during the pandemic period and to explore how fitness changed with a different college grade. Methods: We conducted repeated measures of 1000 m running and pull-up testing on students from one university in China before and after the lockdown. A total of 7107 (age 19.21 ± 1.17 yr.) male students who completed the same 1000 m running and pull-up testing in 2019 and 2020 were included in the analysis. Results: The paired t-test result indicates a reduction in 1000 m running and pull-up performance by 10.91% (95% CI = 0.89, 0.95) and 23.89% (95% CI = −0.36, −0.31), respectively. Interestingly, college men in the 2017 grade (the third-year college men) had more decreases than in the 2019 grade (the first-year college men). The 1000 m running performance was decreased by 14.43% and 6.48% in the third- and the first-year college men, respectively. The pull-up performance was decreased by 39.11 % in the third-year college men while increased by 10.98% in the first-year college men. Conclusions: The COVID-19 lockdown reduced 1000 m running and pull-up performances among Chinese college men. The reduction varies by grade and it seems to be particularly seriously decreased for the third-year college men while being modest for the first-year college men. Public policy was urgently needed to improve Chinese college men’s fitness performance after the lockdown.