Search

McGuigan, MR, Newton, MJ, Winchester, JB, and Nelson, AG. Relationship between isometric and dynamic strength in recreationally trained men. Strength Cond Res 24(9): 2570-2573, 2010--The purpose of this investigation was to examine the relationships between measures of maximal isometric force (peak force [PF]), rate of force development (RFD), vertical jump performance (VJ) and 1-repetition maximum (1RM) strength in recreationally trained men. The subjects in this study were 26 men ([mean [+ or -] SD]: age 22 [+ or -] 1 years; height 175 [+ or -] 7 cm; mass 90 [+ or -] 10 kg). They were tested for PF using the isometric midthigh pull exercise. The 1RM for the squat and bench press exercise were determined as a measure of dynamic strength. Explosive strength was measured as RFD from the isometric force-time curve. Correlations between the variables were calculated using Pearson product moment correlation coefficient. There was a nearly perfect correlation between measures of PF and 1RM squat (r = 0.97, p < 0.05) and 1RM bench press (r = 0.99, p < 0.05). The correlations were very strong between VJ and PF (r = 0.72, p < 0.05) and 1RM bench press (r = 0.70, p < 0.05). There were also strong correlations between VJ and 1RM squat (r = 0.69, p < 0.05). There were no significant correlations with RFD. The results showed that isometric maximum strength determined during the isometric midthigh pull test correlated well with 1RM and VJ testing. However, RFD measured during the same test did not appear to correlate as well with other measures. The isometric midthigh pull provides an efficient method for assessing strength in recreationally trained individuals. Practioners wishing to obtain performance data related to maximum strength may wish to consider isometric testing as a less time intensive method of testing. KEY WORDS isometric strength, power, vertical jump 1 repetition maximum, resistance training

Rubber-based resistance (RBR) bands and standard link steel (SLS) chains are 2 forms of variable resistance used throughout the strength and conditioning and rehabilitation communities. The purpose of this study was to quantify the tension of RBR bands and the mass of SLS chains as a function of displacement (increasing in 10-cm increments). Five sets of RBR bands (14-, 22-, 30-, 48-, and 67-mm widths) and 5 sets of SLS chains (6-, 8-, 10-, 13-, 16-mm diameters) were measured using a load cell and a force plate. The RBR bands exhibited curvilinear tension-deformation relationships and were best represented ([R.sup.2] greater than or equal to] 0.99) by second-order polynomial functions, whereas the SLS chains exhibited linear mass-displacement relationships and were best represented ([R.sup.2] = 1) by first-order polynomial functions. There were no significant differences (p > 0.05) in force outputs between the load cell and the force plate testing, although the strain gauge is a relatively cheap and viable method of quantifying the variable resistance of chains and bands. The strength and conditioning practitioner when purchasing bands needs to be aware of resting length differences (3.5-5.2%), which resulted in mean tension imbalances of 8-19% in the same color band. This study provides the strength and conditioning coach and clinician with a methodology to quantify variable resistance, which may be useful in the prescription of specific loading intensities. KEY WORDS material properties, standard link steel chains, variable resistance, biomechanics

The purpose of this study was to investigate (a) the cross-sectional relationship of strength, power, and performance variables in trained female athletes and (b) determine if the relationship between these variables changes over the course of a season. Ten female softball players (age = 18.1 [+ or -] 1.6 years, height = 166.5 [+ or -] 8.9 cm, and weight = 72.4 [+ or -] 10.8 kg) from a state Australian Institute of Sport softball team were tested for maximal lower body strength (one repetition maximum [1 RM]), peak force (PF), peak velocity (PV), and peak power (PP) during jump squats unloaded and loaded, unloaded countermovement vertical jump height (VJH) 1 base and 2 base sprint performance and change of direction performance on dominant and nondominant sides. The testing sessions occurred pre, mid, and post a 20-week training period. Relationship between body weight (BW), relative strength (1RM/BW), VJH, relative PP, relative PF, PV, speed, and change of direction variables were assessed by Pearson product--moment correlation coefficient at each testing session. Significant relationships were found across all time points with BW, speed, and change of direction measures (r = 0.70-0.93) and relative strength and measures of speed and change of direction ability (r = 0.73-0.85). There were no significant relationships between VJH and any measure of performance at any time point. In conclusion, BW and relative strength have strong to very strong correlations with speed and change of direction ability, and these correlations remain consistent over the course of the season. However, it seems as if many relationships vary with time, and their relationships should therefore be investigated longitudinally to better determine if these cross-sectional relationships truly reflect a deterministic relationship. KEY WORDS fastpitch, women, agility, correlation, relative strength

The purpose of this study was to investigate the effect of concurrent resistance and endurance cycle training on physiologic and performance parameters of cyclists. Before and after a 6-week training intervention period, 14 well-trained male cyclists completed a maximal graded exercise test, a 30-km dynamic cycling test with 3 intermittent 250-m and 1 -km sprints, and a 1 repetition maximum (1 RM) squat test for the assessment of lower-limb strength. Subjects were allocated into 2 groups: a resistance training group (RT; n = 7) that completed a 6-week undulating, periodized resistance training program (3/wk) in conjunction with their regular cycle training and a control group (CON; n = 7) that maintained their usual cycle training. Upon completion of the training intervention, there was no change in graded exercise test parameters in either group, but the RT group showed a significantly greater increase in 1RM squat strength compared with CON (p < 0.05). Moreover, the change in 30-km time trial and sprinting performance did not differ between RT and CON, except for the final 1-km sprint where the percent change in 1-km final sprint performance was greater in CON (+11%) compared with RT (-5%). In conclusion, although concurrent resistance and endurance training in well-trained cyclists enhanced 1RM strength, it did not improve overall cycle time trial performance and in fact was shown to reduce 1-km final cycle sprint performance compared with a CON group performing their normal cycle training. KEY WORDS power output, sprinting, strength, athlete

The purpose of this investigation was to examine the strength, power, and anthropometric contributors to vertical jump performances that are considered specific to volleyball success, including countermovement vertical jump (CMVJ) and spike jump (SPJ), by examining changes across 12 months in elite volleyball players. Anthropometry (height, mass, [[ZIGMA].sup.7] skinfolds), vertical jump ability (CMVJ, SPJ, and depth jumps from 35 cm), kinetic and kinematic data from an unloaded and loaded (body mass + 50%) jump squat were assessed before and after 12 months of training in 20 elite male volleyball players. To examine the association between the change in each of the strength, power, and anthropometric variables with the changes in CMVJ and SPJ, a correlation analysis of the percent change of each variable with the percent change in CMVJ and SPJ was performed. A significant correlation (r = 0.47; p = 0.04) was observed between changes in CMVJ and SPJ. Significant (p = 0.006-0.02) improvements in CMVJ were associated with increased peak force in the unloaded (r = 0.61 ) and loaded jump squat (r = 0.59) and greater relative power and peak velocity in the loaded jump squat (r = 0.49 and 0.51, respectively). The significant increase in CMVJ was strongly associated (r = 0.865; p < 0.001) with an improved depth-jump ability. Significant (p = 0.003-0.03) increases in SPJ were related to increases in relative power (r = 0.64), peak force (r = 0.46), and peak velocity (r = 0.49) in the loaded jump and improved depth-jumping ability (r = 0.591). This study demonstrates that, in an elite population of volleyball players, stretch shortening cycle performance and the ability to tolerate high stretch loads, as in the depth jump, are critical to improving jumping performance. KEY WORDS spike jump, jump, testing, performance

The Eccentric Utilization Ratio (EUR), which is the ratio of countermovement jump (CMJ) to squat jump (SJ) performance measures, is a useful indicator of training status in elite athletes and their utilization of the stretch-shortening cycle. This investigation sought to determine if EUR was sensitive to different types of resistance training in untrained college-aged males. Twenty-nine college-aged males completed 8 weeks of training and were randomly allocated to 1 of 3 training programs: weight training (n = 10), plyometrics (n = 10), or weightlifting (n = 9). Testing occurred 3 times (pre, mid, post) with a CMJ and SJ conducted on a force plate integrated with a position transducer. Height, weight, and a 1RM (repetition maximum) squat also were measured. Weightlifting significantly (p < 0.05) helped subjects jump higher and produce more power than plyometrics for height and power for both CMJ and SJ results. This investigation indicated EUR did not significantly change, suggesting that this type of performance indicator may not be useful in a recreationally active population. Alternatively, an 8-week training program might not be a long enough time period to see changes in this group of participants. Results did indicate that high-velocity and high-force training programs, consisting of weightlifting and plyometrics, improved lower-body performance, especially in the areas of jump height and power. KEY WORDS exercise test, muscle development, weightlifting

The purpose of this study was to investigate the effects of different durations of resistance training on body composition and power in children. The study was a 24-week longitudinal design involving 31 preadolescent children who were overweight or obese (ages 7-12 years), divided into 3 groups and resistance trained 3 times per week. Group 8 (G8) trained for 8 weeks, group 16 (G16) trained for 16 weeks, and group 24 (G24) trained for 24 weeks. All participants were measured at weeks 0, 8, 16, and 24 for body composition and power. Subjects in G8 and G16 continued to be tested during the testing weeks after cessation of their training programs. Body composition and bone mineral content were measured by dual-energy X-ray absorptiometry. Significant improvements in body composition were seen in the initial 8-week training phase, and these improvements were maintained for the subsequent 16 weeks. Significant changes in percent body fat (~5-7%) were observed at 8 weeks in all 3 groups. Total fat mass decreased significantly at week 8 in G16 and G24 (5.9%). By week 24, total fat mass was significantly reduced by 8.1% in G24. Significant improvements were observed in static jump power, which improved by 10.5% at week 16 in G24. These results suggest that an 8-week resistance training program is sufficient time to significantly change body composition, strength, and power measures in children who are overweight or obese. However, further improvements are realized with longer-duration resistance training programs. On cessation of the training programs, the G8 and G16 groups maintained the benefits of the exercise program until the end of the study period. KEY WORDS strength training, obesity, exercise

Force platforms are used extensively to measure force and power output during countermovement jump (CMJ). The purpose of this study was to examine measurement reliability and validity of commonly used performance measurements derived from ground reaction force (GRF)--time data during CMJ and the influence of sampling at different frequencies. Twenty-four men performed 2 trials of CMJ on a force platform, and GRF-time data were sampled at a rate of 500 Hz. Data obtained at 500 Hz were considered as the reference, and then data were resampled at 400, 250, 200, 100, 50, and 25 Hz, using interpolation. Commonly used power, force, and velocity performance measures were obtained from GRF-time data. Reliability was assessed by intraclass correlation coefficient (ICC) and coefficient of variation (CV) between the 2 trials within the session. Peak power, peak force, and peak velocity were highly reliable across all sampling frequencies (ICC = 0.92-0.98, CV = 1.3-4.1). Percentage differences from 500-Hz reference values ranged from -0.85 to 0.20% at 400 Hz, -1.88 to 0.89% at 250 Hz, -1.80 to 1.31% at 200 Hz, -3.63 to 3.34% at 100Hz, -11.37 to 6.51% at 50Hz, and -13.17 to 9.03% at 25 Hz. In conclusion, peak power, force, and velocity measurements derived from GRF to assess leg extensor capabilities are reliable within a test session except for peak rate of force development and time to peak power. With regard to sampling frequency, scientists and practitioners may consider sampling as low as 200 Hz, depending on the purpose of measurement, because the percentage difference is not markedly enlarged until the frequency is 100 Hz or lower. KEY WORDS velocity, impulse, momentum, force platform, vertical jump

This research aimed to critically examine the effectiveness of a time-limited and distance-regulated interval training program on subelite field hockey players. Subjects comprised 22 women (26.1 [+ or -] 4.5 years, 62.8 [+ or -] 7.4 kg, 1.7 [+ or -] 0.9 m) and 22 men (22.1 [+ or -] 3.2 years, 74.9 [+ or -] 5.4 kg, 1.8 [+ or -] 0.5 m) field hockey players. Performance tests included a standard 20-m multiple-stage shuttle run (MSSR), a 1000-m repeated-effort (x 3) time trial (RTT), and a 100-m repeated-effort (x 3) shuttle run (RSR) in an ascending pyramid order. The training program was administered separately to the women and men after a traditional, single-peak, 4-week mesocycle, with the fourth week for recovery. Training consisted of an average total sprint distance of 3000 m per session during a 20-week data collection period, with testing administered pre and post. Initial athlete profiling showed a significant (p < 0.05) gender difference on all performance tests. The MSSR results were 8.6 [+ or -] 2.5 (range 6.7-10.7) and 12.1 [+ or -] 2.4 (10.2-13.5) women and men, respectively. The RTT and RSR times for women and men were 5:34 [+ or -] 0:30 seconds (4:31-6:21), 5:14 [+ or -] 0:30 seconds (4:27-6:02), 4:12 [+ or -] 0:13 seconds (3:50-4:36), and 4:06 [+ or -] 0:13 seconds (3:47-6:02), respectively. After 20 weeks of training, a small to moderate effect size (ES) was calculated for the women's (n = 12) MSSR (ES = 0.74) and RSR (ES = 0.50) results. A distinct improvement in the MSSR resulted after training for men (n = 16), with a moderate ES (1.34). In contrast, completion times in RSR were marginally reduced, with a small ES (0.49). The findings demonstrate that a 3000-m interval-based conditioning program, when conducted in conjunction with normal-skill game play training, can lead to significant improvements in player conditioning during a competitive season. Future research should employ modified performance tests that more accurately reflect the nature of the game. KEY WORDS adaptation, overground running, physical performance

The purpose of this study was to investigate the effect of an 8-week resistance training program on children who were overweight or obese. Forty-eight children (n = 26 girls and 22 boys; mean age = 9.7 years) participated in an 8-week undulating periodized resistance training program for 3 d x [wk.sup.-1]. Measures of body composition via dual-energy X-ray absorptiometry, anthropometry, strength, and power were made before and after the training intervention. There was a significant decrease in absolute percent body fat of 2.6% (p = 0.003) and a significant increase in lean body mass of 5.3% (p = 0.07). There were no significant changes in height, weight, body mass index, total fat mass, or bone mineral content. There were significant increases in 1-repetition maximum squat (74%), number of push-ups (85%), countermovement jump height (8%), static jump height (4%), and power (16%). These results demonstrate that the resistance training program implemented produces significant changes in body composition and strength and power measures, as well as being well tolerated by the participants. An undulating periodized program provides variation and significantly increases lean body mass, decreases percent body fat, and increases strength and power in children who are overweight and obese. Key Words strength training, obesity, exercise

Measuring and tracking performance variables such as peak power output is essential for assessing the effects of training and for informing adjustments to optimize program design. The purpose of this study was to track the long-term changes in muscular power, velocity, and jump height of elite Australian Rules Football (ARF) players during a 3-year period. Twelve members of an ARF team were tracked during the study. The physical characteristics of the subjects were age, 25.3 [+ or -] 2.8 years; body mass, 93.0 [+ or -] 6.8 kg; and height, 192 [+ or -] 6 cm. The subjects performed unweighted and weighted (40 kg) countermovement jumps (CMJ) and static jumps (SJ). Peak power, jump height, and bar velocity were determined using a force plate and position transducer. Measures of peak power output during both the CMJ and SJ indicated significant (p [less than or equal to] 0.001) increases of 13% (effect size [ES] = 0.70) and 17% (ES = 1.77), respectively, during the course of the tracking period. There was also a significant 9% (ES = 0.71) increase in CMJ40 peak power. The subjects' CMJ peak velocity improved by 10.7% (ES = 0.34), and SJ peak velocity improved by 12.6% (ES = 0.37). The data from this study show that elite-level ARF players can continue to increase muscular power and velocity. This information is of interest to strength and conditioning coaches who are interested in improving power performance of their athletes for a long-term period. Key Words jump squat, assessment, velocity, training

This study investigated the effects of ballistic resistance training and strength training on muscle fiber composition, peak force (PF), maximal strength, and peak power (PP). Fourteen males (age = 21.3 [+ or -] 2.9, body mass = 77.8 [+ or -] 10.1 kg) with 3 months of resistance training experience completed the study. Subjects were tested pre and post for their squat one-repetition maximum (1RM) and PP in the jump squat (JS). Peak force and rate of force development (RFD) were tested during an isometric midthigh pull. Muscle biopsies were obtained from the vastus lateralis for analysis of muscle fiber type expression. Subjects were matched for strength and then randomly selected into either training (T) or control (C) groups. Group T performed 8 weeks of JS training using a periodized program with loading between 26 and 48% of 1RM, 3 days per week. Group T showed significant improvement in PP from 4088.9 [+ or -] 520.6 to 5737.6 [+ or -] 651.8 W. Rate of force development improved significantly in group T from 12687.5 [+ or -] 4644.0 to 25343.8 [+ or -] 12614.4 N x [s.sup.-1]. PV improved significantly from 1.59 [+ or -] 0.41 to 2.11 [+ or -] 0.75 m x [s.sup.-1]. No changes occurred in PF, 1RM, or muscle fiber type expression for group T. No changes occurred in any variables in group C. The results of this study indicate that using ballistic resistance exercise is an effective method for increasing PP and RFD independently of changes in maximum strength (1RM, PF), and those increases are a result of factors other than changes in muscle fiber type expression. KEY WORDS training, resistance, isometric, jumping, force

The purpose of this research project was to evaluate the methodology of an iso-inertial force-velocity assessment utilizing a range of loads and a group of high-performance athletes. A total of 26 subjects (19.8 [+ or -] 2.6 years, 196.3 [+ or -] 9.6 cm, 88.6 [+ or -] 8.9 kg) participated in this study. Interday reliability of various force-time measures obtained during the performance of countermovement jumps with a range of loads was examined, followed by a validity assessment of the various measures' ability to discriminate among performance levels, while the ability of the test protocol to detect training-induced changes was assessed by comparing results before and after an intensive 12-week training period. Force and velocity variables were observed to be reliable (intraclass correlation coefficient 0.74-0.99). Large effect size statistic (ES > 0.50) differences among player groups were observed for peak power (1.36-2.25), relative peak power (1.57-2.42), and peak force (0.74-0.95). Significant (p < 0.05) and large (ES > 0.50) improvements were observed in the kinetic values after the intensive training period. The results of this study indicate that the incremental load power profile is an acceptably reliable, valid, and sensitive method of assessing force and power capabilities of the leg extensors in high-performance and elite volleyball players. KEY WORDS assessment, jump squat, volleyball, football

The purpose of this investigation was to examine the potential strength, power, and anthropometric contributors to vertical jump performances that are considered specific to volleyball success: the spike jump (SPJ) and counter-movement vertical jump (CMVJ). To assess the relationship among strength, power, and anthropometric variables with CMVJ and SPJ, a correlation and regression analysis was performed. In addition, a comparison of strength, power, and anthropometric differences between the seven best subjects and the seven worst athletes on the CMVJ test and SPJ test was performed. When expressed as body mass relative measures, moderate correlations (0.53-0.65; p [less than or equal to] 0.01) were observed between the 1RM measures and both relative CMVJ and relative SPJ. Very strong correlations were observed between relative (absolute heightstanding reach height) depth jump performance and relative SPJ (0.85; p [less than or equal to] 0.01) and relative CMVJ (0.93; p [less than or equal to] 0.01). The single best regression model component for relative CMVJ was the relative depth jump performance, explaining 84% of performance. The single best predictor for relative SPJ was also the relative depth jump performance (72% of performance), with the three-component models of relative depth jump, relative CMVJ, spike jump contribution (percent difference between SPJ and CMVJ), and relative CMVJ, spike jump contribution, and peak force, accounting for 96% and 97%, respectively. The results of this study clearly demonstrate that in an elite population of volleyball players, stretch-shortening cycle performance and the ability to tolerate high stretch loads, as in the depth jump, is critical to performance in the jumps associated with volleyball performance. KEY WORDS spike jump, countermovement, jump, testing

The primary purpose of this study was to investigate whether the athlete who has high performance in hang power clean, a common weight-lifting exercise, has high performances in sprinting, jumping, and changing of direction (COD). As the secondary purpose, relationships between hang power clean performance, maximum strength, power and performance of jumping, sprinting, and COD also were investigated. Twentynine semiprofessional Australian Rules football players (age, height, and body mass [mean [+ or -] SD]: 21.3 [+ or -] 2.7 years, 1.8 [+ or -] 0.1 m, and 83.6 [+ or -] 8.2 kg) were tested for one repetition maximum (1RM) hang power clean, 1RM front squat, power output during countermovement jump with 40-kg barbell and without external load (CMJ), height of CMJ, 20-m sprint time, and 5-5 COD time. The subjects were divided into top and bottom half groups (n = 14 for each group) based on their 1RM hang power clean score relative to body mass, then measures from all other tests were compared with one-way analyses of variance. In addition, Pearson's product moment correlations between measurements were calculated among all subjects (n = 29). The top half group possessed higher maximum strength (P < 0.01), power (P < 0.01), performance of jumping (P < 0.05), and sprinting (P < 0.01). However, there was no significant difference between groups in 5-5 COD time, possibly because of important contributing factors other than strength and power. There were significant correlations between most of, but not all, combinations of performances of hang power clean, jumping, sprinting, COD, maximum strength, and power. Therefore, it seems likely there are underlying strength qualities that are common to the hang power clean, jumping, and sprinting. KEY WORDS weightlifting, jump squat, counter movement jump, power, maximum strength, athletic performance

The purpose of this study was to investigate the effect of weighted jump squat training with and without eccentric braking. Twenty male subjects were divided into two groups (n = 10 per group), Non-Braking Group and Braking Group. The subjects were physically active, but not highly trained. The program for Non-Braking Group consisted of 6 sets of 6 repetitions of weighted jump squats without reduction of eccentric load for 8 weeks. The training program for the Braking Group consisted of the same sets and repetitions, but eccentric load was reduced by using an electromagnetic braking mechanism. Jump and reach, countermovement jump, static jump, drop jump, one repetition maximum half squat, weighted jump squat, and isometric/isokinetic knee extension/flexion at several different positions/angular velocities were tested preand posttraining intervention. The Non-Braking Group exhibited greater improvement in peak torque during isokinetic concentric knee flexion at 300[degrees]/s [Non-Braking Group: (mean [+ or -] SD) 124.0 [+ or -] 22.6 Nm at pre- and 134.1 [+ or -] 18.4 Nm at posttraining, and Braking Group: 118.5 [+ or -] 32.7 Nm at pre- and 113.2 [+ or -] 26.7 Nm at posttraining]. Braking Group exhibited superior adaptations in peak power relative to body mass during weighted jump squat [Non-Braking Group: (mean [+ or -] SD) 49.1 [+ or -] 8.6 W/kg at pre- and 50.9 [+ or -] 6.2 W/kg at posttraining, and Braking Group: 47.9 [+ or -] 6.9 W/kg at pre- and 53.7 [+ or -] 7.3 W/kg at posttraining]. It appears that power output in relatively slow movement (weighted jump squat) was improved more in the Braking Group, however strength in high velocity movements (isokinetic knee flexion at 300[degrees]/s) was improved more in NonBraking Group. This study supports load and velocity specific effects of weighted jump squat training. KEY WORDS power, strength, landing impact, stretch shortening cycle, specificity

The eccentric utilization ratio (EUR), which is the ratio of countermovement jump (CMJ) to static jump (SJ) performance, has been suggested as a useful indicator of power performance in athletes. The purpose of the study was to compare the EUR of athletes from a variety of different sports and during different phases of training. A total of 142 athletes from rugby union, Australian Rules Football, soccer, softball, and field hockey were tested. Subjects performed both CMJ and SJ on a force plate integrated with a position transducer. The EUR was measured as the ratio of CMJ to SJ for jump height and peak power. The rugby union, Australian Rules Football, and hockey athletes were tested during off-season and preseason to provide EUR data during different phases of training. For men, EUR for soccer, Australian Rules Football, and rugby was greater than softball (effect size range, 0.83-0.92). For women, EUR for soccer was greater than field hockey and softball (0.86-1.0). There was a significant difference between the jump height and peak power method for the Australian Rules Football, rugby, and field hockey tests conducted preseason (p < 0.05). For field hockey, there was a significant increase in EUR from off-season to preseason. Athletes in sports such as soccer, rugby union, and Australian Rules Football appear to have higher EUR values, which reflects the greater reliance on stretch shortening activities in these sports. It does appear that EUR can be used to track changes in training with the values significantly increasing from off-season to preseason. The EUR provides the practitioner with information about the performance of athletes and appears to be sensitive to changes in the type of training being undertaken. KEY WORDS. countermovement jump, squat jump, stretch-shortening cycle, power

Athletes commonly use elastic bands as a training method to increase strength and performance. The purpose of this study was to investigate the effect of elastic bands on peak force (PF), peak power (PP), and peak rate of force development (RFD) during the back-squat exercise (BSE). Ten recreationally resistance-trained subjects (4 women, 6 men, mean age 21.3 [+ or -] 1.5 years) were tested for their 1 repetition maximum (1RM) in the BSE (mean 117.6 [+ or -] 48.2 kg) on a Smith machine. Testing was performed on 2 separate days, with 2 sets of 3 repetitions being performed for each condition. Testing was conducted at 60% and 85% of 1RM with and without using elastic bands. In addition, 2 elastic band loading conditions were tested (B1 and B2) at each of the 2 resistances. No bands (NB) represents where all of the resistance was acquired from free-weights. B1 represents where approximately 80% of the resistance was provided by free-weights, and approximately 20% was provided by bands. B2 represents where approximately 65% of the resistance was provided by free-weights, and approximately 35% was provided from bands. The subjects completed the BSE under each condition, whereas PF, PP, and RFD was recorded using a force platform. There was a significant (p < 0.05) increase in PF between NB-85 and B2-85 of 16%. Between B1-85 and B2-85, PF was increased significantly by 5% (p < 0.05). There was a significant (p < 0.05) increase in PP between NB-85 and B2-85 of 24%. No significant differences were observed in RFD during the 85% conditions or for any of the measured variables during the 60% conditions (p < 0.05). The results suggest that the use of elastic bands in conjunction with free weights can significantly increase PF and PP during the BSE over free-weight resistance alone under certain loading conditions. The greatest differences are observed during the higher loading conditions, with the B1-85 condition appearing to be optimal for athletic performance of the ones we tested. The strength training professional could use variable resistance training (VRT) to increase PF and PP more than the traditional BSE can. VRT could also be used to train these 2 performance characteristics together, which might be especially useful in season, when weight-room training volume can sometimes be limited. KEY WORDS. variable resistance, resistance training, strength, biomechanics

Hatfield, D.L., W.J. Kraemer, J.S. Volek, M.R. Rubin, B. Grebien, A.L. Gcentsmez, D.N. French, T.P. Scheett, N.A. Ratamess, M.J. Sharman, M.R. McGuigan, R.U. Newton, and K. Hakkinen. The effects of carbohydrate loading on repetitive jump squat power performance. J. Strelzgth Cond. Res. 20(1): 167-171. 2006.--The beneficial role of carbohydrate (CHO) supplementation in endurance exercise is well documented. However, only few data are available on the effects of CHO loading on resistance exercise performance. Because of the repetitive use of high-threshold motor units, it was hypothesized that the power output (power-endurance) of multiple sets of jump squats would be enhanced following a high-CHO (6.5 g CHO kg body [mass.sup.-1]) diet compared to a moderate-CHO (4.4 g CHO kg body [mass.sup.-1]) diet. Eight healthy men (mean [+ or -] SD: age 26.3 [+ or -] 2.6 years; weight 73.0 [+ or -] 6.3 kg; body fat 13.4 [+ or -] 5.0%; height 178.2 [+ or -] 6.1 cm) participated in 2 randomly assigned counterbalanced supplementation periods of 4 days after having their free-living habitual diet monitored. The resistance exercise test consisted of 4 sets of 12 repetitions of maximal-effort jump squats using a Plyometric Power System unit and a load of 30% of 1 repetition maximum (IRM). A 2-minute rest period was used between sets. Immediately before and after the exercise test, a blood sample was obtained to determine the serum glucose and blood lactate concentrations. No significant difference in power performance existed between the 2 diets. As expected, there was a significant (p [less than or equal to] 0.05) decrease in power performance between the repetitions in every set. Blood lactate concentrations were significantly higher postexercise with both the high-CHO and the moderate- or lower-CHO diet, but there were no differences between conditions. The results indicated that the power output during multiple sets of maximal jump squats was not enhanced following a higher-CHO diet compared to a moderate- or lower-CHO diet. These data show that elevated carbohydrate intake is not needed to optimize a repetitive power-endurance performance when it is done as the first exercise in a workout. KEY WORDS. nutrition, supplementation, power, recovery

The purpose of this study was to determine the early phase adaptations in short-term traditional (TRT) versus superslow (SST) resistance training. Sixteen apparently healthy subjects participated in this study. Subjects were pretested and posttested for their 1 repetition maximums (1RM) in the squat and bench press, peak power in a countermovement jump (CMJ) and squat jump (SJ), and body composition using dual energy x-ray absorptiometry. Subjects participated in an 8-week resistance training program in either SST (n = 9, 3 men, 6 women), using 50% of 1RM, or TRT (n = 7, 3 men, 4 women), using 80% of 1RM. Both groups trained 3 days per week. The TRT and SST groups improved in strength by 6.8 and 3.6% in the squat exercise and by 8.6 and 9.1% in the bench press, respectively. Peak power for the CMJ increased significantly in the TRT group, from 23.0 [+ or -] 5.5 W/kg to 25.0 [+ or -] 6.3 W/kg; no such increase was seen with respect to the SST group. Both groups' 1RM increased significantly for both the bench press and the squat. No changes in body composition were seen for either group. The results of this study suggest that TRT is more effective for improving peak power than SST. Key Words. 1 repetition maximum, countermovement jump, squat jump, peak power, superslow

We investigated the effect of 'psyching-up' on force production during the bench press. Twelve men (mean age [+ or -] SD: 27.4 [+ or -] 11.2 years) and 8 women (20.9 [+ or -] 2.5 years) with strength-training experience performed 5 bench press repetitions on a modified Biodex isokinetic dynamometer during 3 interventions. The interventions were counterbalanced and included a free-choice psych-up, a cognitive distraction, and an attention-placebo. Peak force recorded after psyching-up (mean [+ or -] SD: 764 [+ or -] 269 N*m) was significantly different from both distraction (703 [+ or -] 282 N*m, p = 0.003) and attention-placebo (708 [+ or -] 248 N*m, p = 0.01). The mean percentage increase in peak force from distraction to psyching-up was 11.8% (6 to 18%, 95% confidence interval [CI]) and 8.1% from placebo to psyching-up (3 to 13%, 95% CI). The results of the present study indicate that psyching-up may increase force production during the bench press exercise in participants with at least 1 year strength-training experience. Key Words. mental preparation, psychology, performance enhancement, strength

The purpose of this study was to apply the session rating of perceived exertion (RPE) method, which is known to work with aerobic training, to resistance training. Ten men (26.1 [+ or -] 10.2 years) and 10 women (22.2 [+ or -] 1.8 years), habituated to both aerobic and resistance training, performed 3 x 30 minutes aerobic training bouts on the cycle ergometer at intensities of 56%, 71%, and 83% V[O.sub2] peak and then rated the global intensity using the session RPE technique (e.g., 0-10) 30 minutes after the end of the session. They also performed 3 x 30 minutes resistance exercise bouts with 2 sets of 6 exercises at 50% (15 repetitions), 70% (10 repetitions), and 90% (4 repetitions) of 1 repetition maximum (1RM). After each set the exercisers rated the intensity of that exercise using the RPE scale. Thirty minutes after the end of the bout they rated the intensity of the whole session and of only the lifting components of the session, using the session RPE method. The rated intensity of exercise increased with the %V[O.sub.2] peak and the %1RM. There was a general correspondence between the relative intensity (%V[O.sub.2] peak and % 1RM) and the session RPE. Between different types of resistance exercise at the same relative intensity, the average RPE after each lift varied widely. The resistance training session RPE increased as the intensity increased despite a decrease in the total work performed (p < 0.05). Mean RPE and session RPE-lifting only also grew with increased intensity (p < 0.05). In many cases, the mean RPE, session RPE, and session RPE-lifting only measurements were different at given exercise intensities (p < 0.05). The session RPE appears to be a viable method for quantitating the intensity of resistance training, generally comparable to aerobic training. However, the session RPE may meaningfully underestimate the average intensity rated immediately after each set. KEY WORDS. weight lifting, Borg CR-10 scale, training intensity

There are no published data on the reliability of competitive strength performance, even though it has a pronounced effect on athletes' medal prospects and the ability of coaches and athletes to identify factors that affect competitive performance. The purpose of this investigation was to analyze the reliability of elite olympic weightlifters over a series of international weightlifting meets. We obtained official results of international competitions over an 18-month period from 1999 until the 2000 Olympic Games at the International Weightlifting Federation website. The measure of reliability was the typical within-athlete variation, derived as the coefficient of variation (CV) by 2-way analysis of variance of log-transformed weights lifted for the snatch, clean and jerk, and total. The results of this analysis were (a) within-athlete variations were as follows: snatch, 2.7% (95% likely range, 2.4-3.2%); clean and jerk, 2.3% (1.7-3.6%); total weight lifted, 2.5% (2.2-2.9%); (b) men and women: the variation was higher for the women compared with the men in both snatch (ratio of CV, 1.4) and clean and jerk (ratio of CV, 1.5), and for the total weight lifted (ratio of CV, 1.3); and (c) the top 5 athletes were almost always more reliable than the bottom-half athletes. Recent work has shown that the smallest worthwhile performance is about half the within-athlete variation, so coaches and sport scientists should focus on enhancements of as little as 1.2% in total weight lifted for elite olympic weightlifters. KEY WORDS. reliability, olympic weightlifting, coefficient of variation, elite athletes

This study investigated the reliability of the session rating of perceived exertion (RPE) scale to quantify exercise intensity during high-intensity (H), moderate-intensity (M), and low-intensity (L) resistance training. Nine men (24.7 [+ or -] 3.8 years) and 10 women (22.1 [+ or -] 2.6 years) performed each intensity twice. Each protocol consisted of 5 exercises: back squat, bench press, overhead press, biceps curl, and triceps pushdown. The H consisted of 1 set of 4-5 repetitions at 90% of the subject's 1 repetition maximum (1RM). The M consisted of 1 set of 10 repetitions at 70% 1RM, and the L consisted of 1 set of 15 repetitions at 50% 1RM. RPE was measured following the completion of each set and 30 minutes postexercise (session RPE). Session RPE was higher for the H than M and L exercise bouts (p [less than or equal to] 0.05). Performing fewer repetitions at a higher intensity was perceived to be more difficult than performing more repetitions at a lower intensity. The intraclass correlation coefficient for the session RPE was 0.88. The session RPE is a reliable method to quantify various intensities of resistance training. KEY WORDS. strength training, Borg CR-10 scale, reliability

The purpose of this study was to determine if a short-term exercise program (6 weeks) could improve subjective physical appearance ratings. Twenty-five previously sedentary adult men (aged 18-40 years) were randomly assigned to one of 3 training groups: cardiovascular, strength, or control. Subjects participating in an exercise group trained for an average of 34 minutes, 3 times per week. All subjects were pre- and posttested to determine body composition, strength, and cardiovascular fitness. Subjects were also digitally photographed from 4 angles. The photographs were rated by the subjects and by a panel of 6 judges using an analog scale. There was no significant difference in the groups by trials interaction effect for pre- and post-V[O.sub.2]max, percent fat, total lean tissue, percent limb fat, percent trunk fat, lean trunk tissue, or lean limb tissue. The subjects rated themselves higher than the panel, with average scores of 4.74 vs. 3.46, 4.26 vs. 3.10, and 4.61 vs. 3.49 for the cardiovascular, strength, and control groups, respectively (p < 0.05). The men of the panel rated the subjects significantly higher than did the women, with average scores of 4.61 vs. 2.31, 4.13 vs. 2.06, and 4.53 vs. 2.18 for the cardiovascular, resistance, and control groups, respectively (p < 0.05). This study showed that a 6-week training program did not change self-rated or panel-rated appearance scores. KEY WORDS. fitness programs, attractiveness, shoulder-to-waist ratio, self-perception

The purpose of this investigation was to evaluate changes in myosin heavy chain (MyHC) and titin isoforms after using various loads during explosive jump squat training. Twenty-four male athletic subjects were recruited for this study. Two experimental groups performed 8-weeks of jump squats using either 30% (n = 9) or 80% (n = 9) of their previously determined 1 repetition maximum. A third group served as controls (n = 6). Muscle biopsies were obtained before and after 8 weeks from vastus lateralis. The analysis of titin within these subjects confirmed that human skeletal muscle contains 2 isoforms of titin. There was no significant group X time interaction for MyHC or titin isoform expression. The data from this investigation indicates that a relatively short period of explosive resistance training results in negligible changes in the expression of MyHC or titin isoforms. Key Words: muscle proteins, SDS-PAGE