Search

This paper investigated the possibility of using very fine wood chips for the production of P5 type building boards according to the EN 312 (2010) standard. Small wood chips are more evenly compressed during mat pressing because they have a high bulk density. Therefore, the beneficial effects of forming denser outer layers is lost. To achieve the desired shape of the density profile curve of a board, the moisture content of the chips used in the outer face layers was increased considerably (up to about 30%). As a result of the conducted tests, the mechanical properties of the manufactured boards met the EN 312 requirements for P5 boards above a density of 650 kg/m³. In cases when the additional conditions are being met, the standard requirements may be met at an even lower density level of approximately 550 kg/m³. [ABSTRACT FROM AUTHOR]

This study evaluated the possibility of producing oriented strand boards (OSB) from non-strand chips. Properties of the produced boards were compared with commercially available OSB/3. Research has shown that replacing the strand chips of external layers with smaller chips allowed for the manufacturing of OSB/3 using chips up to four times shorter than standard strand chips. Oriented strand board manufacturers should consider preparing a new standard and introducing the market to a new type of OSB with very good mechanical properties and made of selected strand chips comprising one of the fractions obtained during screening. [ABSTRACT FROM AUTHOR]