Search

A comparison among ten market pulps at a laboratory scale using uncreped tissue handsheets was performed to study the performance of wood and non-wood pulps for tissue manufacturing, evaluate what fiber features are desired for a specific tissue property, and determine how non-wood pulps can be used to replace or complement wood pulps in tissue products. A characterization of the fiber morphology and handsheet properties (softness, water absorbency, and strength) was performed at different mechanical refining levels. The results showed that the fiber morphology had a major impact on tissue properties. Market pulps with a combination of long fibers, high coarseness, and low fines content can provide superior bulk and water absorbency. Short fibers with thin cell walls and low fines content can impart superior softness. Bleached bamboo soda pulp can replace hardwood and softwood pulps to provide an excellent combination of water absorbency and strength. Bleached bamboo soda pulp can also replace Northern bleached softwood kraft (NBSK) pulp to impart strength without sacrificing softness. Bleached and semi-bleached wheat straw soda pulps presented a similar combination of softness and strength as Southern bleached hardwood kraft (SBHK) pulp. The wheat straw pulps can be used to replace deinked pulp (DIP) pulp to impart intermediate levels of water absorbency and strength. [ABSTRACT FROM AUTHOR]

Based on publications related to the use of micro- and nanofibrillated cellulose (MNFC) in papermaking applications, three sets of parameters (intrinsic and extrinsic variables, furnish composition, and degree of dispersion) were proposed. This holistic approach intends to facilitate understanding and manipulation of the main factors describing the colloidal behavior in systems comprising of MNFC, pulp fibers, and additives, which directly impact paper product performance. A preliminary techno-economic assessment showed that cost reductions driven by the addition of MNFC in paper furnishes could be as high as USD 149 per ton of fiber (up to 20% fiber reduction without adverse effects on paper's strength) depending on the cost of papermaking fibers. It was also determined that better performance in terms of strength development associated with a higher degree of MNFC fibrillation offset its high manufacturing cost. However, there is a limit from which additional fibrillation does not seem to contribute to further strength gains that can justify the increasing production cost. Further research is needed regarding raw materials, degree of fibrillation, and combination with polyelectrolytes to further explore the potential of MNFC for the reduction of weight of paper products. [ABSTRACT FROM AUTHOR]

New alternatives to plastic straws are being considered due to consumer demands for sustainability and recent changes in government policies and regulations, such as bans on single-use plastic products. There are concerns regarding paper straw quality and stability over time when in contact with beverages. This study evaluated the performance and properties of commercially available paper straws and their counterpart plastic straws in various intended applications. The physical, mechanical, and compositional characteristics, as well as the liquid interaction properties of the straws, were determined. The paper straws were composed mainly of hardwood fibers that were hard sized with a hydrophobic sizing agent to achieve a contact angle of 102° to 125°. The results indicated that all the evaluated paper straws lost 70% to 90% of their compressive strength after being in contact with the liquid for less than 30 min. Furthermore, the paper straws absorbed liquid at approximately 30% of the straw weight after liquid exposure for 30 min. Increased liquid temperatures caused lower compressive strengths and higher liquid uptake in the paper straws. This report provides directions and methods for testing paper straws and defines current property limitations of paper straws relative to plastic straws. [ABSTRACT FROM AUTHOR]