Search

This review article was prompted by a remarkable growth in the number of scientific publications dealing with the use of nanocellulose (especially nanofibrillated cellulose (NFC), cellulose nanocrystals (CNC), and bacterial cellulose (BC)) to enhance the barrier properties and other performance attributes of new generations of packaging products. Recent research has confirmed and extended what is known about oxygen barrier and water vapor transmission performance, strength properties, and the susceptibility of nanocellulose-based films and coatings to the presence of humidity or moisture. Recent research also points to various promising strategies to prepare ecologically-friendly packaging materials, taking advantage of nanocellulose-based layers, to compete in an arena that has long been dominated by synthetic plastics. Some promising approaches entail usage of multiple layers of different materials or additives such as waxes, high-aspect ratio nano-clays, and surface-active compounds in addition to the nanocellulose material. While various high-end applications may be achieved by chemical derivatization or grafting of the nanocellulose, the current trends in research suggest that high-volume implementation will likely incorporate water-based formulations, which may include water-based dispersions or emulsions, depending on the enduses. [ABSTRACT FROM AUTHOR]

Soda-anthraquinone (soda-AQ) pulping of barley straw was used to obtain cellulosic pulps for papermaking purposes. The identified parameters, or variables to be optimized, were operating time, anthraquinone concentration, and PFI refiner revolutions, and the influence of these operating variables on pulp properties was studied. A polynomial model that reproduced the experimental results with errors less than 6% was developed. Operating variables were found (46 min of processing time, 0.4 wt.% of anthraquinone concentration, and 3000 rpm of PFI revolution) that yielded competitive pulp properties (82 °SR beating grade number, 870 mL/g of viscosity, Kappa number of 13, 77 Nm/g of tensile index, and 30% ISO brightness) at reasonable chemical and energy costs. On the other hand, this study highlights the usefulness of this polynomial model as a method to minimize the use of anthraquinone in these pulping processes and to be able to predict what the pulp properties will be. For comparison purposes, new operating conditions were found, and the pulp properties still remain at a very good level for this cereal straw. [ABSTRACT FROM AUTHOR]

Empty fruit bunches (EFB) from palm oil were characterized. The holocellulose (66.97%), α-cellulose (47.91%), and lignin (24.45%) are similar to wood materials, and various non-wood materials, but the fiber length is shorter (0.53 mm). The influence of operational variables in the EFB pulping [formic acid (75-95%), hydrochloric acid (0.05-0.15%), and time (30-150 min)], on the yield, kappa number, viscosity, and brightness of the pulps was studied. By using a factorial design, equations that reproduced the experimental results for the dependent variables, errors less than 10% were obtained. These equations could be used to find suitable conditions, so that operating with not too high values of operating variables (with minor costs of capital and of operation), pulps could be obtained with acceptable properties. In this way, a cellulosic pulp with a 42.3% yield, 22.7% brightness, and a 512 mL/g viscosity was obtained under the following conditions: 92.5% of formic acid, 0.075% of hydrochloric acid, and a time of 60 min. A pulp (31.1 kappa number and 606 mL/g viscosity) was bleached by EPabOPoP sequence, achieving a brightness of 69.4%, a loss of viscosity and yield of 34.8% and 13.1%, respectively. The residual liquor from the pulping with formic acid 95%, 0.05% hydrochloric acid and 30 min, provides a liquor with 18.2% residual lignin, 4.1% glucose, 9.8% xylose, and 1.2% arabinose, all on dry weight of original material. [ABSTRACT FROM AUTHOR]