Search

In this letter, a sub-pm linewidth, high pulse energy and high beam quality microsecond-pulse 766.699 nm Ti:sapphire laser pumped by a frequency-doubled Nd:YAG laser is demonstrated. At an incident pump energy of 824 mJ, the maximum output energy of 132.5 mJ at 766.699 nm with linewidth of 0.66 pm and a pulse width of 100 µs is achieved at a repetition rate of 5 Hz. To the best of our knowledge, this is the highest pulse energy at 766.699 nm with pulse width of hundred micro-seconds for a Ti:sapphire laser. The beam quality factor M2 is measured to be 1.21. It could be precisely tuned from 766.623 to 766.755 nm with a tuning resolution of 0.8 pm. The wavelength stability is measured to be less than ±0.7 pm over 30 min. The sub-pm linewidth, high pulse energy and high beam quality Ti:sapphire laser at 766.699 nm can be used to create a polychromatic laser guide star together with a home-made 589 nm laser in the mesospheric sodium and potassium layer for the tip-tilt correction resulting in the near-diffraction limited imagery on a large telescope.

We report the first demonstration on three types of 1.3 μm spectral region in a Q -switched Nd:YAG laser. In order to dissipate the heat deposition effectively to obtain good beam quality, the Nd:YAG rod crystal with 1° cut-angle on end faces is side-pumped by the quasi-continuous-wave pulsed laser diode. A Suprasil etalon is well designed as the intracavity mode-selector to obtain wavelength-tunable single line or power-ratio-controllable dual line operation at 1319 nm and 1338 nm. With the pump pulse width of 200 μs and pump power of 410 W, the acousto-optic Q -switched laser delivered a pulse width of 117 ns at 400 Hz repetition rate, and the M 2 factor was measured to be about 1.87. 1319 nm together with 1338 nm single-wavelength laser achieved an average output power of 47.6 W and 39.9 W with a linewidth of 0.48 nm and 0.32 nm, and a tunable range of 111.2 pm and 108.6 pm, respectively. Among dual-wavelength oscillation, both lines can be tuned at almost equal intensity level with 45.7 W total output power, which is input into an LBO crystal to generate red light of 11.4 W for 659 nm, 6.7 W for 664 nm, and 7.5 W for 669 nm. The 1.3 μm wavelength-selectable operation realized by using the same laser configuration may enhance the application in the fields of tunable lasers and THz frequency generation.

A 100 W level kilohertz repetition-rate microsecond (µs)-pulse all-solid-state sodium beacon laser at 589 nm is demonstrated for the first time, to the best of our knowledge, via combining two independent µs-pulsed lasers. Each beamlet is generated by the sum-frequency mixing of pulsed 1064 and 1319 nm lasers in a lithium triborate (LBO) crystal, which operate at 500 Hz pulse repetition frequency with 61 W p -polarized and 53 W s -polarized output, respectively. An incoherent sequence combining technology of polarized laser beams is employed to add the two beamlets. The average power of the combined beam is up to 107.5 W with a combining efficiency of 94.3%. The combined beam has a 1 kHz repetition rate with ∼ 120 µ s pulse duration and beam quality M 2 = 1.41 . The central wavelength with a linewidth of ∼ 0.3 G H z is locked to a sodium D 2 a absorption line. To the best of our knowledge, this is a record-high power operating at kilohertz for µs-pulsed solid-state sodium beacon lasers.

A void-free bonding technique was demonstrated for a large slab Nd: YAG crystal with a bonding surface dimension of ∼ 160 m m × 70 m m . By using the novel fluxless oxide layer removal technology, the indium-oxide barrier problem was resolved. With the help of electrochemical-polished indium solder and a plasma-cleaned heat sink, the solderability of the indium was enhanced; in particular, the contact angle of the solder was improved from 51° to 31°. With the largest-bonding-size slab, a single-slab laser created a maximum output power of 7.3 kW under an absorbed pump power of 12.8 kW, corresponding to an optical to optical efficiency of 57% and a slope conversion of 67.8%. By detecting the wavefront of the interferometer before and after bonding, the RMS of wavefront was 0.192 λ and 0.434 λ ( λ = 633 n m ), respectively. To the best of our knowledge, this is the largest void-free bonding size for a laser slab and the highest output power achieved from a single-slab crystal laser oscillator.