Search

The performance of multimode interference (MMI) couplers is limited by the presence of phase errors that represent the deviation of the propagation constants of the modes from the quadratic dependence on their order. In this work, we propose a simple and effective method for reducing the phase errors of spatial modes to a relatively high order by forming rectangular grooves near the side edges of the MMI coupler along its entire length. The influence of the groove dimensions and position on the propagation constants of higher-order modes is analyzed using the perturbation method and strict vector simulations for high- and medium-index contrast material platforms. Through numerical simulations, we demonstrate the effectiveness of the proposed method in improving the performance of air-cladded dual-mode ( T E 0 and T E 1 ) MMI-based 50:50 and 100:0 splitters for 1.31 µm wavelength made of medium- and high-contrast materials, T i O 2 : S i O 2 / S i O 2 and S i / S i O 2 , respectively.

We report on the fabrication, experimental measurement, and numerical simulation of sol-gel diffraction grating structures deposited on the end-face of a single mode optical fiber. Using the imprint method, we manufactured surface relief grating structures in four configurations with different grating-relative-to-fiber arrangements. We demonstrate the high quality of the fabricated structures based on atomic force microscopy imaging and their operational characteristics, presenting measured and simulated far-field intensity distributions. Using a numerical model, we simulated the diffraction patterns in the far-field. We obtained strong agreement between the results of the simulations and the experiments in terms of the angular positions of the diffraction peaks. We also investigated the tolerance of fabricated structures to high-power lasers. Among the proposed structures, the most intriguing is the grism fabricated on a fiber end-face using sol-gel imprint technology for the first time, to the best of our knowledge.

This study demonstrated that two-step structuring of the waveguide thickness in a bent section significantly reduces bend-related inter-mode crosstalk, excess loss, and pure bending loss. A simple analytical formula was derived linking the thickness change required to compensate for bend-induced effects with geometrical parameters of the waveguide and bending radius. The effectiveness of the proposed approach was verified through rigorous numerical simulations of the loss and inter-mode crosstalk based on transformation optics formalism. The numerical results obtained for a T i O 2 : S i O 2 medium index contrast waveguide exhibited significant improvement of all relevant parameters for T E 00 and T E 01 modes.

We present experimental results on fiber Bragg gratings inscription in nanostructured graded-index (nGRIN) and multi-step index (MSIN) optical fibers, both having non-uniform radial distribution of GeO 2 dopant in the fiber cores. In particular, the positive role of radial shaping the GeO 2 distribution in the fiber core on grating reflection efficiency is reported. We postulate that an appropriate spatial distribution of the germanium concentration that matches the fundamental mode profile improves grating spectral response due to more efficient grating-mode interaction, as compared with uniformly doped step-index optical fibers with the same overall doping level. Moreover, we show that radially shaped fibers exhibit moderately higher temperature responses than their step-index counterparts.

We present an effective method for direct fiber coupling of a quantum dot (QD) that is deterministically incorporated into a cylindrical mesa. For precise positioning of the fiber with respect to the QD-mesa, we use a scanning procedure relying on interference of light reflected back from the fiber end-face and the top surface of the mesa, applicable for both single-mode and multi-mode fibers. The central part of the fiber end-face is etched to control the required distance between the top surface of the mesa and the fiber core. Emission around 1260 nm from a fiber-coupled InGaAs/GaAs QD is demonstrated and its stability is proven over multiple cooling cycles. Moreover, a single photon character of emission from such system for a line emitting above 1200 nm is proven experimentally by photon autocorrelation measurements with an obtained value of the second order correlation function at zero time-delay well below 0.5.

We studied vector frequency conversion in externally tuned microstructured fibers for applications as a novel, nonlinear fiber-optic sensor. We investigated both experimentally and numerically a possibility of shifting vector and scalar modulation instability gain bands by pressure-induced changes in the linear properties of a microstructured fiber. Our results show that polarization-dependent vector nonlinear processes sensitive to variation of fiber group velocity difference (group birefringence) exhibit a clear advantage for pressure-sensing applications compared with scalar nonlinear processes only sensitive to group velocity dispersion changes. Analytical predictions and numerical simulations confirm our measurement results.

We report on the sensing characteristics of rocking filters fabricated in two microstructured fibers with enhanced polarimetric sensitivity to hydrostatic pressure. The filter fabricated in the first fiber shows a very high sensitivity to pressure ranging from 16.2 to 43.4 nm/MPa, depending on the resonance order and features an extremely low cross-sensitivity between pressure and temperature 28 ÷ 89 × 10(3) K/MPa. The filter fabricated in the second fiber has an extreme sensitivity to pressure ranging from -72.6 to -177 nm/MPa, but a less favorable cross-sensitivity between pressure and temperature of 1.05 ÷ 3.50 × 10(3) K/MPa. These characteristics allow using the rocking filters for pressure measurements with mbar resolution.

We designed, manufactured and characterized two birefringent microstructured fibers that feature a 5-fold increase in polarimetric sensitivity to hydrostatic pressure compared to the earlier reported values for microstructured fibers. We demonstrate a good agreement between the finite element simulations and the experimental values for the polarimetric sensitivity to pressure and to temperature. The sensitivity to hydrostatic pressure has a negative sign and exceeds -43 rad/MPa x m at 1.55 microm for both fibers. In combination with the very low sensitivity to temperature, this makes our fibers the candidates of choice for the development of microstructured fiber based hydrostatic pressure measurement systems.

We studied both numerically and experimentally a birefringence in a microstructure fiber with elliptical inclusion highly doped with GeO(2). We demonstrate that such inclusion increases the phase modal birefringence and modifies its dispersion in the short wavelength range, thus causing that group birefringence crosses zero value at a certain wavelength. Moreover, we numerically analyzed different factors contributing to the overall fiber birefringence, including geometrical birefringence induced by holes distribution and ellipticity of the inclusion as well as stress birefringence associated with thermal shrinkage of the doped glass.

We demonstrate experimentally that bending loss in large mode area photonic crystal fibers oscillates with wavelength. To do so we carried out loss measurements for different fiber bend radii and for different angular orientations. These results confirm the oscillatory behavior of bending loss vs. wavelength as predicted recently by numerical analysis [J. Olszewski et al., Opt. Express 13, 6015 (2005)]. We also found good agreement between our measurement results and our simulations relying on a finite element method with perfectly matched layers and an equivalent index model.

The paper presents a fully vectorial analysis of bending losses in photonic crystal fibers employing edge/nodal hybrid elements and perfectly matched layers boundary conditions. The oscillatory character of losses vs. both the wavelength and the bending radius has been demonstrated. The shown oscillations originate from the coupling between the fundamental mode guided in the core and the gallery of cladding modes arising due to light reflection from the boundary between solid and holey part of the cladding.

We have manufactured and characterized a birefringent holey fiber of a new construction. The birefringence in this fiber is induced by the highly elliptical shape of the core, which consists of a triple defect in a hexagonal structure. Using a hybrid edge-nodal finite-element method, we calculated the spectral dependence of phase and group modal birefringence for spatial modes E11 and E21 in idealized and in real fiber, whose geometry we determined by using a scanning-electron microscope. Results of our calculations show that technological imperfections significantly affect the fiber's birefringence. Normalized cutoff wavelengths for higher-order modes relative to the filling factor were also determined for the idealized structure. We observed a significant disagreement between theoretical and experimental values of cutoff wavelengths, which was attributed to high confinement losses near the cutoff condition. We also measured the spectral dependence of the phase and the group modal birefringence for spatial modes E11 and E21. The measured parameters showed good agreement with the results of modeling.