Search

In this paper, a novel, to the best of our knowledge, polymer-based negative curvature ring-core fiber (NC-RCF) is proposed and investigated. The hollow-core NC-RCF is composed of TOPAS as background material. The inner and outer negative curvature structure layers are connected to the annular area, and the orbital angular momentum (OAM) modes can propagate in the annular core. In the frequency region of 1.0-1.5 THz, the designed NC-RCF can stably transmit 82 OAM modes. Investigation results indicate that the effective refractive index differences between the corresponding HE and EH modes are above 10 -4 . The confinement losses of EH or HE modes are smaller than 10 -8 d B / m , and the dispersion variations are lower than 0.31 ps/THz/cm. Effective mode areas are larger than 5.14 m m 2 . Additionally, the highest mode purity of all vector modes is 99.78%. In addition, modal birefringence, also known as the walk-off length, has also been discussed. All these operation performances indicate that the designed NC-RCF make contributions to the optical communication systems.

A multifunctional design based on vanadium dioxide (VO 2 ) metamaterial structure is proposed. Broadband absorption, linear-to-linear (LTL) polarization conversion, linear-to-circular (LTC) polarization conversion, and total reflection can be achieved based on the insulator-to-metal transition (IMT) of VO 2 . When the VO 2 is in the metallic state, the multifunctional structure can be used as a broadband absorber. The results show that the absorption rate exceeds 90% in the frequency band of 2.17 - 4.94 THz, and the bandwidth ratio is 77.8%. When VO 2 is in the insulator state, for the incident terahertz waves with a polarization angle of 45°, the structure works as a polarization converter. In this case, LTC polarization conversion can be obtained in the frequency band of 0.1 - 3.5 THz, and LTL polarization conversion also can be obtained in the frequency band of 3.5 - 6 THz, especially in the 3.755 - 4.856 THz band that the polarization conversion rate is over 90%. For the incident terahertz waves with a polarization angle of 0°, the metamaterial structure can be used as a total reflector. Additionally, impacts of geometrical parameters, incidence angle and polarization angle on the operating characteristics have also been investigated. The designed switchable multifunctional metasurfaces are promising for a wide range of applications in advanced terahertz research and smart applications.

This publisher's note contains corrections to Opt. Lett.46, 290 (2021)OPLEDP0146-959210.1364/OL.412229.

At present, most of the gradient metasurfaces used to construct surface plasmon polaritons (SPPs)/spoof SPPs (SSPs) couplers are usually compact metal antennas working under reflection and transmission. In reflection mode, meta-couplers link propagating waves and surface waves (SWs), and SWs will undergo significant scattering before coupling to an Eigen SPP in the target system. In transmission mode, metal meta-couplers will encounter complex multilayer designing at the microwave/terahertz region and metal absorption loss at optical frequencies. In this Letter, to the best of our knowledge, a novel design using dielectric gradient metasurfaces instead of metal metasurface couplers is proposed to excite broadband SSPs on the metal groove array. We demonstrate that the well-designed phase dielectric gradient metasurface converts the normal incident terahertz wave to the predetermined angle in the dielectric substrate and then excites the broadband SSPs with the transmission coupling between the dielectric meta-coupler and SSPs surface. This research may open up new avenues in simple and broadband plane dielectric meta-couplers for SSPs in ultra-thin and compact functional devices for versatile applications.