Search

We discuss the design and characterization of a micro ring laser with on-chip filtered optical feedback. The laser and feedback section have been fabricated on a generic photonic integration platform using only standard building blocks. The filtering process in the feedback scheme is based on the reflection from a distributed Bragg reflector. We include several control pads in the feedback section which allows us to control separately the wavelength, the strength and the phase of the filtered feedback. By controlling the phase of the feedback, we can fine-tune the longitudinal mode selection and wavelength of the laser output, while changing the strength of the feedback allows us to control the power distribution between the two directions of the micro ring laser. Numerical simulations reproduce our experimental observations.

We report on a novel speckle reduction scheme using microlens arrays as screen material for application in laser-based projection systems. The scheme is based on properly adjusting the coherence properties on the screen: when the coherence area on the microlens-array screen is smaller than the microlens footprint, there is no interference between the fields emitted by the different microlenses and as a result no speckle is formed. We measured and modelled the speckle properties of microlens arrays with regular and irregular structure and lens sizes, and also a paper screen for comparison. In the experiments, we tune the laser beam's spatial coherence by sending it through a rotating diffuser. We show the amount of speckle reduction that can be achieved, which mechanisms influence the observed speckle contrast and we discuss the limitations due to increased non-uniformity in the projected image.

With the development of new applications using semiconductor ring lasers (SRLs) subject to optical feedback, the stability properties of their outputs becomes a crucial issue. We propose a systematic bifurcation analysis in order to properly identify the best parameter ranges for either steady or self-pulsating periodic regimes. Unlike conventional semiconductor lasers, we show that SRLs exhibit both types of outputs for large and well defined ranges of the feedback strength. We determine the stability domains in terms of the pump parameter and the feedback phase. We find that the feedback phase is a key parameter to achieve a stable steady output. We demonstrate that the self-pulsating regime results from a particular Hopf bifurcation mechanism referred to as bifurcation bridges. These bridges connect two distinct external cavity modes and are fully stable, a scenario that was not possible for diode lasers under the same conditions.

Optical implementations of reservoir computing systems are very promising because of their high processing speeds and the possibility to process several tasks in parallel. These systems can be implemented using semiconductor lasers subject to optical delayed feedback and optical injection. While the amount of the feedback/injection can be easily controlled, it is much more difficult to control the optical feedback/injection phase. We present extensive numerical investigations of the influence of the feedback/injection phases on laser-based reservoir computing systems with feedback. We show that a change in the phase can lead to a strong reduction in the reservoir computing system performance. We introduce a new readout layer design that -at least for some tasks- reduces this sensitivity to changes in the phase. It consists in optimizing the readout weights from a coherent combination of the reservoir's readout signal and its delayed version rather than only from the reservoir's readout signal as is usually done.

We study the perception of speckle by human observers in a laser projector based on a 40 persons survey. The speckle contrast is first objectively measured making use of a well-defined speckle measurement method. We statistically analyse the results of the user quality scores, revealing that the speckle perception is not only influenced by the speckle contrast settings of the projector, but it is also strongly influenced by the type of image shown. Based on the survey, we derive a speckle contrast threshold for which speckle can be seen, and separately we investigate a speckle disturbance limit that is tolerated by the majority of test persons.

Semiconductor lasers subject to delayed optical feedback have recently shown great potential in solving computationally hard tasks. By optically implementing a neuro-inspired computational scheme, called reservoir computing, based on the transient response to optical data injection, high processing speeds have been demonstrated. While previous efforts have focused on signal bandwidths limited by the semiconductor laser's relaxation oscillation frequency, we demonstrate numerically that the much faster phase response makes significantly higher processing speeds attainable. Moreover, this also leads to shorter external cavity lengths facilitating future on-chip implementations. We numerically benchmark our system on a chaotic time-series prediction task considering two different feedback configurations. The results show that a prediction error below 4% can be obtained when the data is processed at 0.25 GSamples/s. In addition, our insight into the phase dynamics of optical injection in a semiconductor laser also provides a clear understanding of the system performance at different pump current levels, even below solitary laser threshold. Considering spontaneous emission noise and noise in the readout layer, we obtain good prediction performance at fast processing speeds for realistic values of the noise strength.

In laser projection applications, laser light modules are often combined with rotating diffusers in order to reduce the appearance of speckle on the projection screen. The rotation of a diffuser in a laser beam generates a beam of partially coherent light. Propagation of this light through the different optical components constituting the laser projector is thus essential when investigating the appearance of speckle. In this paper, a computationally efficient simulation model is presented to propagate partially coherent light through a homogenizing rectangular light pipe. The light pipe alters the coherence properties of the light and different consequences are discussed. The outcomes of the simulation model are experimentally verified using a reversing wavefront Michelson interferometer.

The use of the postprocessing method consisting of bitwise Exclusive-OR and least significant bits extraction to generate random bit sequences typically requires two distinct chaotic outputs. While the two signals are, in general, generated using two separated devices, e.g. two Fabry-Perot lasers, a single semiconductor ring laser can be used as an alternative due to its circular symmetry which facilitates lasing in two counterpropagating mode directions. We consider a chaotic semiconductor ring laser and investigate both numerically and experimentally its characteristics for fast random bit generation. In particular, we show that by sampling each directional mode's output signal using a 8-bit analog-digital converter and through Exclusive-OR operation applied to the two resulting signals (after throwing away 4 most significant bits), we can achieve fast random bit-streams with a bit rate 4 × 10 = 40 Gbit/s, passing the statistical randomness tests. To optimize the system performance, we also study the dependence of randomness on the main system parameters and on noise.

We analyze experimentally and theoretically the effects of delayed optical cross-feedback in semiconductor ring lasers. We show that under appropriate conditions, feeding of only one directional mode back into the counter-propagating mode leads to square-wave oscillations. In this regime, the laser switches regularly between the two counter-propagating modes with a period close to twice the roundtrip time in the external feedback loop. We find that these oscillations are robust and appear for a wide range of parameters as long as a small asymmetry in the linear coupling between both modes is present. We show that by increasing the feedback strength or the injection current, the square-wave oscillations gradually disappear. Due to noise, mode-hopping between stable lasing in one directional mode and square wave oscillations is observed in this transition region.

We present a standardized procedure to measure the amount of speckle in laser based projection systems. The parameters of the measurement procedure are chosen such that the measured speckle contrast values are in correspondence with the subjective speckle perception of a human observer, independent of the particularities of the laser projector's illumination configuration. The resulting measurement configuration consists of a single digital image sensor in combination with a camera lens of which the settings are related to the human eye. In addition, a standardized measurement procedure and speckle pattern analysis method are suggested. Finally, the speckle measurement set-up is applied to a laser projection system and corresponding subjective speckle perception results of a large test public are discussed.

We demonstrate low-speckle laser projection using a broad-area vertical-cavity surface-emitting laser (VCSEL) emitting at 840 nm wavelength as the illumination source. By driving the source in a nonmodal emission regime, we were able to achieve speckle contrast values as low as 3.5% in a realistic projection setup. This was done by driving the VCSEL with specific current pulses without using any additional or mechanically moving components to destroy the coherence of the laser beam. We quantitatively model the speckle contrast reduction based on polarization scrambling and the reduced temporal and spatial coherence of the VCSEL.

Broad-area vertical-cavity surface-emitting lasers (BA-VCSELs) can exhibit a state of spatially incoherent emission, as we recently reported in [M. Peeters et al., Opt. Express, 13, 9337 (2005)]. Here, we experimentally study the evolution of a BA-VCSEL under pulsed operation from well-defined modal emission with a multitude of transverse cavity modes to such spatially incoherent emission. The transition is studied using a high-speed intensified CCD camera and differential image analysis with which single-shot measurements of the imaged nearfield, farfield, spatial coherence, and spectral emission properties are acquired. This combination of experimental characterization tools allows for a detailed description of the BA-VCSEL's emission behavior, which is necessary for an in-depth understanding of the processes involved. We find the interplay between the thermal chirp and the build-up of a spatially distributed thermal lens to be decisive for the break-up of the global cavity modes.

We report a strong reduction of spatial coherence of the emission of large aperture vertical-cavity surface-emitting lasers when they are driven by microsecond electrical pulses. We give evidence that this is due to a breakdown of the modal emission of these lasers. The spatial decoherence manifests itself in the formation of a Gaussian far field intensity distribution. The coherence radius we extract is 1.4 micrometer under these operating conditions, irrespective of the Fresnel number of the vertical-cavity surface-emitting laser. Finally, the spatial coherence properties can be varied by changing the pulse duration or pulse amplitude.