Search

OBJECTIVE: To determine whether radiochemical purity is affected when 99mTc radiopharmaceuticals are prepared using sodium chloride injection from plastic ampoules that have been exposed to light. METHODS: Sodium chloride injection from plastic ampoules that were either exposed to light for 7 days or protected from light was used in the preparation of nine common 99mTc radiopharmaceuticals: albumin nanocolloid, exametazime, macrosalb, mebrofenin, medronate, pentetate, sestamibi, succimer and tetrofosmin. Five different batches of ampoules (exposed and unexposed) were used for each radiopharmaceutical. Radiochemical purity was measured by established analytical methods (thin-layer chromatography, liquid chromatography and nuclepore filtration) as specified in the European Pharmacopoeia or by the manufacturer. Analysis was performed within 1 h of preparation and at the products' expiries. RESULTS: The radiochemical purity of each 99mTc radiopharmaceutical was satisfactory when unexposed sodium chloride injection was used in its preparation. There was a significant difference between exposed and unexposed results (P < 0.05) for 99mTc exametazime (69.0 ± 9.3% vs. 88.6 ± 0.8%), 99mTc albumin nanocolloid (94.3 ± 1.1% vs. 98.8 ± 0.4%) and 99mTc macrosalb (84.0 ± 4.1% vs. 98.0 ± 2.2%) after preparation. Unsatisfactory radiochemical purity was the result of 99mTc pertechnetate impurity. The radiochemical purities of 99mTc albumin nanocolloid and 99mTc macrosalb increased over time and were satisfactory at their expiries. CONCLUSION: When 99mTc albumin nanocolloid, 99mTc macrosalb and 99mTc exametazime are prepared using sodium chloride injection from plastic ampoules that have been exposed to light, radiochemical purity is adversely affected. The other 99mTc radiopharmaceuticals tested are unaffected.

To determine if 99mTc-Nanocoll is affected by storage in a syringe, passage through an R-Lock or mixing with Patent Blue V dye.A Nanocoll kit was reconstituted at 280 MBq/5 ml. Samples of 0.5 ml were drawn into 3 ml Plastipak syringes. After 1 h and 6 h, adsorption of 99mTc on a syringe was measured and the following tests of quality were performed on samples from the kit and a syringe: 99mTc-pertechnetate impurity by thin-layer chromatography, the percentage of 99mTc on particles100 nm by Nuclepore filtration and particle size by photon correlation spectroscopy. These tests were also applied to samples that had been passed through an R-Lock or mixed with Patent Blue V. Each experiment was performed five times.In all samples, adsorption of 99mTc on syringes was1%, 99mTc-pertechnetate impurity was2%,95% of 99mTc was labelled to particles100 nm in diameter, the mean particle diameter was 6.6 nm and the particles had a diameter of12 nm. All tests showed no significant difference (P0.05, n = 5) between 99mTc-Nanocoll from the original kit and a syringe at either 1 h or 6 h. Similar results were obtained with samples that had been passed through an R-Lock or mixed with Patent Blue V.A capped 3 ml Plastipak syringe is a suitable container in which to supply 99mTc-Nanocoll. Neither passage through an R-Lock nor mixing with Patent Blue V affects the quality of 99mTc-Nanocoll.

Routine technetium-99m mercaptoacetyltriglycine (99mTc-MAG3) radiochemical purity measurements have revealed occasional unacceptably low values. Preliminary investigations suggested a causal link with the residence time of sodium chloride injection in the syringe used to reconstitute the MAG3 kit.To investigate the cause of this phenomenon, determine how it can be avoided and establish whether it occurs with other 99mTc radiopharmaceuticals.99mTc-MAG3 was prepared by drawing sodium chloride injection into a lubricated, three-part, 10 ml Plastipak syringe and using it to reconstitute a MAG3 kit immediately or after a 15 min incubation period. The radiochemical purity was measured by high-performance liquid chromatography. The experiment was repeated using lubricant-free, two-part, Norm-Ject syringes and lubricated, two-part, Monoject syringes (15 min incubation only). To investigate the influence of Plastipak's rubber components on the radiochemical purity, samples were prepared using sodium chloride injection that had been incubated with lubricated or lubricant-free rubber plunger ends. Similar experiments were performed to determine the effect of Plastipak on 99mTc-exametazime, 99mTc-sestamibi and 99mTc-tetrofosmin.The radiochemical purities of 99mTc-MAG3 prepared with sodium chloride injection incubated for 0 and 15 min in Plastipak syringes were 96.4+/-0.5% and 89.4+/-5.5%, respectively. The difference was significant (P0.05, n=10). With Norm-Ject syringes, the radiochemical purities were 96.5+/-0.5% and 96.6+/-0.5%, respectively. The difference was not significant (P0.05, n=10). With Monoject syringes, the radiochemical purity was 96.6+/-0.4% (n=10). 99mTc-MAG3 prepared using sodium chloride injection treated with lubricated and unlubricated syringe rubber plunger ends had radiochemical purities of 85.3+/-6.6% and 82.1+/-6.5% (n=5), respectively. The radiochemical purities of other 99mTc radiopharmaceuticals prepared using sodium chloride injection incubated for 0 or 15 min in Plastipak syringes were as follows: 99mTc-exametazime, 95.3+/-0.6% and 94.5+/-1.8%; 99mTc-sestamibi, 98.0+/-0.6% and 97.7+/-0.6%; 99mTc-tetrofosmin, 96.5+/-0.2% and 97.0+/-0.4%. None of the differences was significant (P0.05, n=5).A lipophilic impurity, originating from the rubber plunger of a three-part Plastipak syringe, is formed in 99mTc-MAG3 when the sodium chloride injection used to reconstitute the kit is in the syringe for a prolonged time. The effect is eliminated by using a two-part syringe or by injecting the sodium chloride injection into the kit immediately. The phenomenon does not occur with 99mTc-exametazime, 99mTc-sestamibi or 99mTc-tetrofosmin.

Objectives To simulate 9 0 Y-Zevalin thin-layer chromatograms representing a range of radiochemical purities, to compare the radiochemical purities obtained with five techniques used to quantify 9 0 Y on the plates and tomeasure the reproducibility of the five techniques at the minimum acceptable radiochemical purity of 95%. Methods Yttrium-90 solutions were pipetted onto the origin and solvent front lines of thin-layer chromatography (TLC) plates to simulate radiochemical purities of 90%, 92%, 94%, 95%, 96%, 98% and 100%. Each plate was analysed using three TLC scanners (Bioscan AR2000, Bioscan Mini-scan and an instrument constructed in-house) and two cut-and-count techniques: one using a sodium iodide well detector and the other a liquid scintillation counter. The reproducibility of each technique was measured by analysing the 95% plate 10 times. Results The radiochemical purities measured by the five techniques agreed well. The means of the seven results obtained with each agreed within 0.7%. The reproducibility of each technique was excellent. The coefficient of variation for 10 measurements was ≤ 0.3%. The signal to background ratios were satisfactory, ranging from 24 to 2.1 × 10 5 . Conclusion Each technique is suitable for analysing 9 0 Y-Zevalin TLC plates.