Search

The abundance and phylogenetic diversity of the microbial community in the hydrogenetic ferromanganese crust, sandy sediment and overlying seawater were investigated using a culture-independent molecular analysis based on the 16S rRNA gene. These samples were carefully collected from the Takuyo-Daigo Seamount, located in the northwest Pacific Ocean, by a remotely operated vehicle. Based on quantitative PCR analysis, Archaea occupy a significant portion of the prokaryotic communities in the ferromanganese crust and the sediment samples, while Bacteria dominated in the seawater samples. Phylotypes belonging to Gammaproteobacteria and to Marine group I (MGI) Crenarchaeota were abundant in clone libraries constructed from the ferromanganese crust and sediment samples, while those belonging to Alphaproteobacteria were abundant in that from the seawater sample. Comparative analysis indicates that over 80% of the total phylotype richness estimates for the crust community were unique as compared with the sediment and seawater communities. Phylotypes related to Nitrosospira belonging to the Betaproteobacteria and those related to Nitrosopumilus belonging to MGI Crenarchaeota were detected in the ferromanganese crust, suggesting that these ammonia-oxidizing chemolithoautotrophs play a role as primary producers in the microbial ecosystem of hydrogenetic ferromanganese crusts that was formed as precipitates from seawater.

The phylogenetic diversity of archaeal 16S rRNA genes in a thermoacidic spring field of Ohwakudani, Hakone, Japan, was investigated by PCR-based analysis using a novel Archaea -specific primer designed in the present study. Clone libraries of archaeal 16S rRNA genes were constructed from hot water (78°C) and mud (28°C) samples by PCR using a newly designed forward primer and a previously reported forward primer with reverse primers. Most phylotypes found in the libraries from the hot water sample were related to cultured (hyper)thermophiles. The phylotypes and their detection frequencies from the hot water sample were similar for the libraries amplified with the two different primer sets. In contrast, phylotypes having a low similarity (

Thermostabilization of enzymes is one of the greatest challenges of protein engineering. The ancestral mutation method, which introduces ancestral residues into a target enzyme, has previously been developed and used to improve the thermostabilities of thermophilic enzymes. Herein, we report a study that used the ancestral mutation method to improve the thermostability of Bacillus circulans beta-amylase, a mesophilic enzyme. A bacterial, common-ancestral beta-amylase sequence was inferred using a phylogenetic tree composed of higher plant and bacterial amylase sequences. Eighteen mutants containing ancestral residues were designed, expressed in Escherichia coli and purified. Several of these mutants were more thermostable than that of the wild-type amylase. Notably, one mutant had both greater activity and greater thermostability. The relationship between the extent to which the amino acid residues within 5 A of the mutation site were evolutionarily conserved and the extent to which thermostability was improved was examined. Apparently, it is necessary to conserve the residues surrounding an ancestral residue if thermostability is to be improved by the ancestral mutation method.

Group II chaperonins exist in archaea and the eukaryotic cytosol, and mediate protein folding in an ATP-dependent manner. We have been studying the reaction mechanism of group II chaperonins using alpha chaperonin, the recombinant chaperonin alpha subunit homo-oligomer from a hyperthermophilic archaeon, Thermococcus sp. strain KS-1 (T. KS-1). Although the high stability and activity of T. KS-1 alpha chaperonin provided advantages for our study, its high thermophilicity caused the difficulty in using various analytical methods. To resolve this problem, we tried to adapt T. KS-1 alpha chaperonin to moderate temperatures by mutations. The comparison of amino acid sequences between 26 thermophilic and 17 mesophilic chaperonins showed that three amino acid replacements are likely responsible for the difference of their optimal temperatures. We introduced three single mutations and also their double combinations into T. KS-1 alpha chaperonin. Among them, K323R single mutant exhibited the improvements of the folding activity and the ATP-dependent conformational change ability at lower temperatures, such as 50 degrees C and 40 degrees C. Since K323 may secure helix 12 in the closed conformation by interacting with D198, the replacement of Lys to Arg likely induced the higher mobility of the built-in lid, resulting in the higher activity at relatively low temperatures.

Internal symmetry is a common feature of the tertiary structures of proteins and protein domains. Probably, because the genes of homo-oligomeric proteins duplicated and fused, their evolutionary descendants are proteins with internal symmetry. To identify any advantages that cause monomeric proteins with internal symmetry to be selected evolutionarily, we characterized some of the physical properties of a recombinant protein with a sequence consisting of two tandemly fused copies of the Escherichia coli Lac repressor C-terminal alpha-helix. This polypeptide exists in solution mainly as dimer that likely maintains a four-helix bundle motif. Thermal unfolding experiments demonstrate that the protein is considerably more stable at elevated temperatures than is a homotetramer consisting of four non-covalently associated copies of a 21-residue polypeptide similar in sequence to that of the Lac repressor C-terminal alpha-helix. A tandem duplication of our helix-loop-helix polypeptide yields an even more thermally stable protein. Our results exemplify the concept that fusion of non-covalently assembled polypeptide chains leads to enhanced protein stability. Herein, we discuss how our work relates to the evolutionary selective-advantages realized when symmetrical homo-oligomers evolve into monomers. Moreover, our thermally stable single-chain four-helix bundle protein may provide a robust scaffold for development of new biomaterials.

3-Isopropylmalate dehydrogenase (IPMDH) is a dimeric enzyme with a strongly hydrophobic core that is composed of residues from four alpha-helices. We replaced Glu253, which is found in the hydrophobic core and is part of the subunit interface of the Bacillus subtilis (Bs) IPMDH, with several other amino acids to probe. The thermostabilities of the mutants were assessed by measuring the residual enzymatic activities at 40 degrees C after heat treatment and by monitoring changes in ellipticity at 222 nm as the environmental temperature increased incrementally. The results of these studies indicate that, for residues with non-polar side chains, when positioned at residue 253, the thermostabilities of their corresponding mutants correlate positively with the relative hydrophobicities of the side chains. Relative activities of all mutants are lower than that of the wild-type enzyme. For two of the mutants, we directly show that the substitution at position 253 negatively affects Mn(2+) binding, which is required for catalysis. When a lysine is the position 253 residue, the protein dissociates. The results presented herein increase our understanding of the role played by the BsIPMDH dimer interface on the stability and activity of BsIPMDH.

We constructed mutant genes of Caldococcus noboribetus isocitrate dehydrogenase containing ancestral amino acid residues that were inferred using the maximal likelihood method and a composite phylogenetic tree of isocitrate dehydrogenase and 3-isopropylmalate dehydrogenase. The mutant genes were expressed in Escherichia coli and the protein products purified. Thermostabilities, reported as the half-inactivation temperatures, for the purified enzymes were determined and compared with that of the wild-type enzyme. Four of the five mutant enzymes have greater thermal stabilities than wild-type isocitrate dehydrogenase. The results are compatible with the hyperthermophilic universal ancestor (commonote) hypothesis. Incorporation of ancestral residues into a modern-day protein sequence can be used to improve protein thermostability.

We have investigated factors affecting stability at the subunit-subunit interface of the dimeric enzyme 3-isopropylmalate dehydrogenase (IPMDH) from Bacillus subtilis. Site-directed mutagenesis was used to replace methionine 256, a key residue in the subunit interaction, with other amino acids. Thermal stability against irreversible inactivation of the mutated enzymes was examined by analyzing the residual activity after heat treatment. The mutations M256V and M256A increased thermostability by 2.0 and 6.0 degrees C, respectively, whereas the mutations M256L and M256I had no effect. Thermostability of the M256F mutated enzyme was 4.0 degrees C lower than that of the wild-type enzyme. To our surprise, increasing the hydrophobicity of residue 256 within the hydrophobic core of the enzyme resulted in a lower thermal stability. The mutated enzymes showed an inverse correlation between thermostability and the volume of the side chain at position 256. Based on the X-ray crystallographic structure of Escherichia coli IPMDH, the environment around M256 in the B.subtilis homolog is predicted to be sterically crowded. These results suggest that Met256 prevents favorable packing. Introduction of a smaller amino acid at position 256 improves the packing and stabilizes the dimeric structure of IPMDH. The van der Waals volume of the amino acid residue at the hydrophobic subunit interface is an important factor for maintaining the stability of the subunit-subunit interface and is not always optimized in the mesophilic IPMDH enzyme.

We purified a geranylgeranylglyceryl phosphate (GGGP) synthase from Thermoplasma acidophilum by several steps of chromatography. Based on the proteinase-fragment-mass-pattern analysis of the SDS-PAGE band of the partially purified protein, the DNA sequence encoding the protein was identified from the whole genome sequence database of the species. The gene encoding GGGP synthase in T. acidophilum was cloned after PCR amplification of the gene from the genomic DNA. The recombinant enzyme was expressed in Escherichia coli and purified. A single band with a molecular mass of 27 kDa was obtained by SDS-PAGE analysis. The apparent native molecular mass of the enzyme was about 50 kDa based on gel filtration chromatography, suggesting that the enzyme is active as a homodimer. As the GGGP synthase from Methanobacterium thermoautotrophicum has been reported as a pentamer, the enzymes of the two organisms have different oligomeric structures. Other characteristics, including substrate specificity, are similar for the GGGPs of these organisms.

Polypeptide synthesis at high temperature directed by single strand DNA as a messenger was investigated using cell-free extracts of an extremely thermophilic bacterium, Thermus thermophilus strain HB27, and a hyperthermophilic, acidophilic archaeon, Sulfolobus tokodaii strain 7. Aminoglycoside antibiotics enhanced the reaction; neomycin stimulated it most effectively when the extract of the thermophilic bacterium was used, and paromomycin was the best among the antibiotics tested for the extract of the hyperthermophilic archaeon. A common correlation was found between the stimulation of DNA-directed polypeptide synthesis and the misreading rate in RNA-directed polypeptide synthesis. Spermine stimulated the reaction directed by DNA like in the case of poly(Phe) synthesis directed by poly (rU). The cell-free systems can be used for direct production of proteins from genes in high throughput studies on the structural genomics of thermophilus.

To characterize the thermal stability of 3-isopropylmalate dehydrogenase (IPMDH) from an extreme thermophile, Thermus thermophilus, urea-induced unfolding of the enzyme and of its mesophilic counterpart from Escherichia coli was investigated at various temperatures. The unfolding curves were analyzed with a three-state model for E.coli IPMDH and with a two-state model for T.thermophilus IPMDH, to obtain the free energy change DeltaG degrees of each unfolding process. Other thermodynamic parameters, enthalpy change DeltaH, entropy change DeltaS and heat capacity change DeltaC(p), were derived from the temperature dependence of DeltaG degrees. The main feature of the thermophilic enzyme was its lower dependence of DeltaG degrees on temperature resulting from a low DeltaC(p). The thermophilic IPMDH had a significantly lower DeltaC(p), 1.73 kcal/mol.K, than that of E.coli IPMDH (20.7 kcal/mol.K). The low DeltaC(p) of T.thermophilus IPMDH could not be predicted from its change in solvent-accessible surface area DeltaASA. The results suggested that there is a large structural difference between the unfolded state of T.thermophilus and that of E.coli IPMDH. Another responsible factor for the higher thermal stability of T.thermophilus IPMDH was the increase in the most stable temperature T(s). The DeltaG degrees maximum of T.thermophilus IPMDH was much smaller than that of E.coli IPMDH. The present results clearly demonstrated that a higher melting temperature T(m) is not necessarily accompanied by a higher DeltaG degrees maximum.

Ancestral amino acid residues were inferred for 3-isopropylmalate dehydrogenase (IPMDH), and were introduced into the enzyme of an extreme thermophile, Sulfolobus sp. strain 7. The thermostability of the mutant enzymes was compared with that of the wild type enzyme. At least five of the seven mutants tested showed higher thermal stability than the wild type IPMDH. The results are compatible with the hyperthermophilic universal ancestor hypothesis. The results also provide a new method for designing thermostable enzymes. The method only relies on the first dimensional structures of homologous enzymes that can be obtained from genetic databases.

A Thermus thermophilus host strain of which the leuB gene was totally deleted was constructed from a delta pyrE strain by a two step method. First, the leuB gene was replaced with the pyrE gene. Second, the inserted pyrE gene was deleted by using 5-fluoroorotic acid. A plasmid vector with the leuB marker was constructed and the plasmid complemented the leuB deficiency of the host. When the leuB gene from Escherichia coli and its derivative encoding a stabilized enzyme were expressed with the host-vector system, their growth temperature reflected the stability of the enzyme. These results suggest that the gene replacement deletion method using the pyrE gene is useful for the construction of a reliable plasmid vector system and it can be applied to the selection of stabilized enzymes.

A mutant plasmid with elevated expression efficiency of GC-rich Thermus thermophilus leuB gene was screened in Escherichia coli. A wild-type plasmid pHB2 carrying T. thermophilus leuB gene was introduced into leuB-deficient E. coli C600 cells. During successive cultures of the transformant in leucine-free medium, the original plasmid was spontaneously replaced by a mutant plasmid. The expression efficiency of the leuB gene on the mutant plasmid was 4.8-fold higher than that of the wild-type plasmid. Sequencing of the mutant plasmid revealed that the open reading frame (ORF1) in front of the leuB gene was shortened from 822 to 306 bp. Several expression vectors were constructed to investigate the effect of the length of ORF1, and the optimal length for the expression of the following leuB gene was determined. It was also shown that the stop codon of ORF1 should be overlapped with the initiation codon of leuB gene for the highest efficiency.

The aspartate aminotransferase gene (AspAT, EC 2.6.1.1) of an extremely thermophilic bacterium, Thermus thermophilus HB8, was cloned and sequenced, and its gene product was overproduced. The purified T. thermophilus AspAT was stable up to about 80 degrees C at neutral pH. T. thermophilus AspAT was strictly specific for acidic amino acid substrates, such as aspartate, glutamate, and the respective keto acids. The gene coding for T. thermophilus AspAT showed that it comprised 1,155 bp with a high G+C content (70 mol%), and encoded a 385-residue protein with a molecular weight of 42,050. The amino acid sequence of T. thermophilus AspAT deduced from its gene showed about 15, 46, and 29% homology with those from Escherichia coli, Bacillus sp. YM-2, and Sulfolobus solfataricus, respectively. When the amino acid sequence of T. thermophilus AspAT was compared with that of E. coli AspAT, the number of Cys was found to have decreased from 5 to 1, that of Asn from 23 to 9, that of Gln from 16 to 8, and that of Asp from 20 to 13, all of which are known to be relatively labile at high temperatures. Conversely, the number of Pro was increased from 15 to 25, Arg from 22 to 32, and Glu 27 to 37. As shown by the E. coli AspAT structure, there was a marked tendency for the extra prolyl residues to be located around the surface of the molecule. This was quite different from that in the case of RecA protein, which shows an increased number of prolyl residues in the interior of its molecule. Different strategies of different proteins as to prolyl contribution to thermostability have been suggested. Despite the high degree of conservation of active-site residues, Arg292 in E. coli AspAT, which interacts with the distal carboxylate of the substrate, was not found in T. thermophilus AspAT. Arg89 may complement the function of Arg292.

Plasmids were detected in isolates of an acidothermophilic archaebacterium Thermoplasma acidophilum. One of the plasmids, pTA1, was characterized. The plasmid was a circular DNA of 15.2 kbp. A physical map was constructed using three restriction endonucleases. A copy number of this plasmid was estimated to be 7–13 per cell. The homologous sequence was not found in the chromosomal DNA of the host cell.

The effects of novel polyamines on aminoacyl-tRNA formation catalyzed by Escherichia coli., Sulfolobus acidocaldarius, and Thermus thermophilus HB8 S-100 extracts were investigated. These effects were diverse and differed depending on the amino acid and the enzyme used. A quaternary polyamine, tetrakis(3-aminopropyl)ammonium, inhibited phenylalanyl-tRNA synthesis catalyzed by the T. thermophilus extract, but not inhibit the other aminoacyl-tRNA formations tested. The inhibition was observed in hybrid reactions where the thermophile tRNA or extract was replaced by its E. coli counterpart, although the quaternary amine did not inhibit Phe-tRNA formation by the E. coli homologous system. Spermine relieved the inhibition of the reaction of thermophile enzyme and tRNA, but not the inhibition of the hybrid reactions. These results suggest that the branched polyamine interacts with both the thermophile enzyme and tRNA(Phe).

A continuous cell-free protein synthesis system of an extremely thermophilic eubacterium, Thermus thermophilus HB27, was constructed. This system produced MS2 phage RNA translation products at a rate of more than 5 micrograms per hour per 1.9 mg of ribosomes at 65 degrees C and the production continued linearly for at least 340 min. When no polyamine was added, the system did not produce the proteins. The highest activity was recorded when 0.1 mM tetrakis(3-aminopropyl)ammonium and 1.0 mM spermine were added simultaneously.