Search

Early works that used thermoluminescent dosimeters (TLDs) to measure absorbed dose from alpha particles reported relatively high variation (10%) between TLDs, which is undesirable for modern dosimetry applications. This work outlines a method to increase precision for absorbed dose measured using TLDs with alpha-emitting radionuclides by applying an alpha-specific chip factor (CF) that individually characterizes the TLD sensitivity to alpha particles. Variation between TLDs was reduced from 21.8% to 6.7% for the standard TLD chips and 7.9% to 3.3% for the thin TLD chips. It has been demonstrated by this work that TLD-100 can be calibrated to precisely measure the absorbed dose to water from alpha-emitting radionuclides., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Larry A. DeWerd reports a relationship with Standard Imaging Inc that includes: board membership and equity or stocks. Co-author is an editor for Applied Radiation and Isotopes - W.C. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

A Fano cavity test was implemented in GEANT4 Monte Carlo code to evaluate the alpha particle transport algorithm. GEANT4 alpha emission data for 212 Pb, 223 Ra, 227 Th, and 225 Ac was compared with the MIRD and RADAR decay databases. Optimal electromagnetic transport parameters (dRover of 0.1 and final range of 1 μm) were recommended since the calculated results with the default parameters differed up to 4.7% from the theoretical results. Good agreement was found between the three decay databases besides a few discrepancies., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

(90)Y is utilized as a therapeutic radioisotope in radiolabeled monoclonal antibodies and in microspheres for targeted radiation therapy of the liver. Currently, the widely used dose calibrator assay of (90)Y can have uncertainties exceeding +/-10%. A non-destructive assay using spectroscopy is possible by reducing the currently published uncertainty (+/-12%) in the internal pair production branching ratio for the 0(+)-0(+) transition of (90)Zr. A high-purity germanium detector was used to determine the branching ratio to be (31.86+/-0.47) x 10(-6).

The use of X-rays for diagnosis has been significant since its discovery. A measurement of the X-ray dose is the main determinant for risk vs benefit of these examinations. Radiation detectors are important for dose measurement. A description of these detectors, including the most frequently used ionization chamber, aids in the understanding necessary for their use. Proper and accurate use of detectors depends on an understanding of their calibration and their characteristics. Detectors such as ionization chamber, including specialized chambers, and solid detectors, including luminescent detectors, are described. This is followed by a description of the calibration process. The precision of measurements can be greatly affected by an understanding of the detector in use.