Search

Quantitative modeling of specific absorption rate and temperature rise within the human body during 1.5 T and 3 T MRI scans is of clinical significance to ensure patient safety. This work presents justification, via validation and comparison, of the potential use of the Visible Human Project (VHP) derived Computer Aided Design (CAD) female full body computational human model for non-clinical assessment of female patients of age 50–65 years with a BMI of 30–36 during 1.5 T and 3 T based MRI procedures. The initial segmentation validation and four different application examples have been identified and used to compare to numerical simulation results obtained using VHP Female computational human model under the same or similar conditions. The first application example provides a simulation-to-simulation validation while the latter three application examples compare with measured experimental data. Given the same or similar coil settings, the computational human model generates meaningful results for SAR, B1 field, and temperature rise when used in conjunction with the 1.5 T birdcage MRI coils or at higher frequencies corresponding to 3 T MRI. Notably, the deviation in temperature rise from experiment did not exceed 2.75° C for three different heating scenarios considered in the study with relative deviations of 10%, 25%, and 20%. This study provides a reasonably systematic validation and comparison of the VHP-Female CAD v.3.0–5.0 surface-based computational human model starting with the segmentation validation and following four different application examples. [ABSTRACT FROM AUTHOR]

Defined daily doses (DDD) have been established in human medicine to standardize the measurement of treatment in a population. In veterinary medicine, the European Medicine Agency published defined daily dose (DDDvet) values for antimicrobial agents used in food-producing animals in 2016. National defined doses (DDDjp) for antimicrobials used for pigs in Japan have recently been determined. The aim of this study was to compare the results of calculated antimicrobial use in the field using the DDDjp and DDDvet values. Data from 74 pig farms in Japan relative to antimicrobial use in 2019 was collected. The numbers of DDDs (the weight of biomass treated in kg-days) using DDDjp and DDDvet values for each farm and for different antimicrobial classes were compared. Associations between calculated numbers of DDDjp and DDDvet on farm level were investigated. In addition, differences in antimicrobial use were investigated between different production types of farms (farrowing, finishing and farrow-to-finish farms). Using DDDjp and DDDvet values, the aggregated number of DDDs for 74 farms were 4,099,188 and 2,217,085 respectively, with the former being larger by 1.85 times than the latter. The most frequently used antimicrobial class was penicillin regardless of whether DDDjp or DDDvet was used. The absence of DDDvet values for certain antimicrobial agents used in Japan and the differences in the number of DDDjps/PCU and DDDvets/PCU indicated the need for Japanese DDDs. The number of DDDs per kg population correction unit (PCU) per farm tended to be higher in farrowing farms than in farrow-to-finish farms and finishing farms, with no significant difference (P = 0.19). [ABSTRACT FROM AUTHOR]

Monitoring of antimicrobial use is essential in the management of the development and selection of antimicrobial resistance. A variety of indicators has become available to monitor antimicrobial use in human and animal medicine. One of them is an indicator based on defined daily dose (DDD). By using the number of DDDs administered and normalising it by the population at risk of being treated over a defined period, one can estimate the number of treatment days with antimicrobial agents in a population. For veterinary medicine, the European Medicines Agency (EMA) has published the European values of DDD (DDDvet) for food-producing animals. In this study, we defined Japanese defined daily doses for antimicrobial agents (DDDjp) using DDD values that we previously assigned for antimicrobial products approved for use in pigs, cattle and poultry in Japan and compared them with DDDvet values. For the comparison, the quotient of Japanese and European values (QDDD) was calculated and the effect of the administration route and the number of active substances contained in the preparation was investigated. A total of 59 DDDjp values were defined for 43 antimicrobial agents using the data of 276 products approved for use in pigs. Likewise, a total of 55 DDDjp values were defined for 32 antimicrobial agents using the data of 196 products for use in cattle, and a total of 27 DDDjps values were defined for 25 antimicrobial agents using the data of 131 products approved for use in poultry. A comparison was made for 42, 28 and 17 pairs of DDDjp and DDDvet values for antimicrobial agents used for pigs, cattle and poultry respectively. The comparison showed median QDDD value of 0.61 and 0.66 for antimicrobial agents used for pigs and cattle respectively (p<0.01), indicating that the Japanese daily doses are significantly lower than the corresponding EMA values in these species. For the antimicrobial agents used for poultry, no significant difference was observed between DDDjp and DDDvet values with a median QDDD value of 1.15. The difference between DDDvet and DDDjp values and absence of DDDvet values for some antimicrobial agents marketed in Japan indicate that DDDjp rather than DDDvet should be used as the basis for the calculation of antimicrobial use monitoring in farm animals in Japan. [ABSTRACT FROM AUTHOR]

Numerical body models of children are used for designing medical devices, including but not limited to optical imaging, ultrasound, CT, EEG/MEG, and MRI. These models are used in many clinical and neuroscience research applications, such as radiation safety dosimetric studies and source localization. Although several such adult models have been reported, there are few reports of full-body pediatric models, and those described have several limitations. Some, for example, are either morphed from older children or do not have detailed segmentations. Here, we introduce a 29-month-old male whole-body native numerical model, "MARTIN", that includes 28 head and 86 body tissue compartments, segmented directly from the high spatial resolution MRI and CT images. An advanced auto-segmentation tool was used for the deep-brain structures, whereas 3D Slicer was used to segment the non-brain structures and to refine the segmentation for all of the tissue compartments. Our MARTIN model was developed and validated using three separate approaches, through an iterative process, as follows. First, the calculated volumes, weights, and dimensions of selected structures were adjusted and confirmed to be within 6% of the literature values for the 2-3-year-old age-range. Second, all structural segmentations were adjusted and confirmed by two experienced, sub-specialty certified neuro-radiologists, also through an interactive process. Third, an additional validation was performed with a Bloch simulator to create synthetic MR image from our MARTIN model and compare the image contrast of the resulting synthetic image with that of the original MRI data; this resulted in a "structural resemblance" index of 0.97. Finally, we used our model to perform pilot MRI safety simulations of an Active Implantable Medical Device (AIMD) using a commercially available software platform (Sim4Life), incorporating the latest International Standards Organization guidelines. This model will be made available on the Athinoula A. Martinos Center for Biomedical Imaging website. [ABSTRACT FROM AUTHOR]

The use of antimicrobial agents in food-producing animals may lead to the emergence and spread of antimicrobial resistance in bacteria of animal origin. The use of antimicrobial agents in pigs in 2018 in Japan was evaluated in terms of the weight of active ingredient and number of defined daily doses (DDD), using annual sales data of veterinary antimicrobials sold for use in pigs. In addition, the use of antimicrobial agents in the Japanese pig sector in 2008 to 2017 was evaluated to determine whether or not there were any differences in temporal change pattern by use of different metrics. In 2018, 447 metric tons of active ingredient, corresponding to 77,379 × 106 kg-days (Japanese DDD) and 34,903 × 106 kg-days (European DDD) were sold. The proportion of the sales amount of sulfonamides, trimethoprim and lincosamides to the total sales amount was significantly different depending on the metric used. For most antimicrobial classes, the number of Japanese DDDs was greater than the number of European DDDs. These results indicate that the DDD-based metric, which is more reflective of the selective pressure of antimicrobials, is recommended for use in monitoring the antimicrobial use in pigs in Japan. The differences in the number of Japanese DDDs and European DDDs appear to confirm the need for Japanese DDDs. [ABSTRACT FROM AUTHOR]

Intracranial electrocortical recording and stimulation can provide unique knowledge about functional brain anatomy in patients undergoing brain surgery. This approach is commonly used in the treatment of medically refractory epilepsy. However, it can be very difficult to integrate the results of cortical recordings with other brain mapping modalities, particularly functional magnetic resonance imaging (fMRI). The ability to integrate imaging and electrophysiological information with simultaneous subdural electrocortical recording/stimulation and fMRI could offer significant insight for cognitive and systems neuroscience as well as for clinical neurology, particularly for patients with epilepsy or functional disorders. However, standard subdural electrodes cause significant artifact in MRI images, and concerns about risks such as cortical heating have generally precluded obtaining MRI in patients with implanted electrodes. We propose an electrode set based on polymer thick film organic substrate (PTFOS), an organic absorbable, flexible and stretchable electrode grid for intracranial use. These new types of MRI transparent intracranial electrodes are based on nano-particle ink technology that builds on our earlier development of an EEG/fMRI electrode set for scalp recording. The development of MRI-compatible recording/stimulation electrodes with a very thin profile could allow functional mapping at the individual subject level of the underlying feedback and feed forward networks. The thin flexible substrate would allow the electrodes to optimally contact the convoluted brain surface. Performance properties of the PTFOS were assessed by MRI measurements, finite difference time domain (FDTD) simulations, micro-volt recording, and injecting currents using standard electrocortical stimulation in phantoms. In contrast to the large artifacts exhibited with standard electrode sets, the PTFOS exhibited no artifact due to the reduced amount of metal and conductivity of the electrode/trace ink and had similar electrical properties to a standard subdural electrode set. The enhanced image quality could enable routine MRI exams of patients with intracranial electrode implantation and could also lead to chronic implantation solutions. [ABSTRACT FROM AUTHOR]