Search

A brushless double-fed induction generator (BDFIG) has shown tremendous success in wind turbines due to its robust brushless design, smooth operation, and variable speed characteristics. However, the research regarding controlling of machine during low voltage ride through (LVRT) need greater attention as it may cause total disconnection of machine. In addition, the BDFIG based wind turbines must be capable of providing controlled amount of reactive power to the grid as per modern grid code requirements. Also, a suitable dynamic response of machine during both normal and fault conditions needs to be ensured. This paper, as such, attempts to provide reactive power to the grid by analytically calculating the decaying flux and developing a rotor side converter control scheme accordingly. Furthermore, the dynamic response and LVRT capability of the BDFIG is enhanced by using one of the very intelligent optimization algorithms called the Salp Swarm Algorithm (SSA). To prove the efficacy of the proposed control scheme, its performance is compared with that of the particle swan optimization (PSO) based controller in terms of limiting the fault current, regulating active and reactive power, and maintaining the stable operation of the power system under identical operating conditions. The simulation results show that the proposed control scheme significantly improves the dynamic response and LVRT capability of the developed BDFIG based wind energy conversion system; thus proves its essence and efficacy. [ABSTRACT FROM AUTHOR]

In this study, multilayer perception neural network (MLPNN) was employed to predict thermal conductivity of PVP electrospun nanocomposite fibers with multiwalled carbon nanotubes (MWCNTs) and Nickel Zinc ferrites [(Ni0.6Zn0.4) Fe2O4]. This is the second attempt on the application of MLPNN with prey predator algorithm for the prediction of thermal conductivity of PVP electrospun nanocomposite fibers. The prey predator algorithm was used to train the neural networks to find the best models. The best models have the minimal of sum squared error between the experimental testing data and the corresponding models results. The minimal error was found to be 0.0028 for MWCNTs model and 0.00199 for Ni-Zn ferrites model. The predicted artificial neural networks (ANNs) responses were analyzed statistically using z-test, correlation coefficient, and the error functions for both inclusions. The predicted ANN responses for PVP electrospun nanocomposite fibers were compared with the experimental data and were found in good agreement. [ABSTRACT FROM AUTHOR]

Particle swarm optimization (PSO) is employed to investigate the overall performance of a pin fin.The following study will examine the effect of governing parameters on overall thermal/fluid performance associated with different fin geometries, including, rectangular plate fins as well as square, circular, and elliptical pin fins. The idea of entropy generation minimization, EGM is employed to combine the effects of thermal resistance and pressure drop within the heat sink. A general dimensionless expression for the entropy generation rate is obtained by considering a control volume around the pin fin including base plate and applying the conservations equations for mass and energy with the entropy balance. Selected fin geometries are examined for the heat transfer, fluid friction, and the minimum entropy generation rate corresponding to different parameters including axis ratio, aspect ratio, and Reynolds number. The results clearly indicate that the preferred fin profile is very dependent on these parameters. [ABSTRACT FROM AUTHOR]