Search

Scraper conveyor is the most important transportation equipment in the comprehensive mining equipment, and the chain drive system is its core subsystem, its dynamic characteristics will significantly affect the efficiency of coal transportation in the comprehensive mining face. In this paper, the dynamic characteristics of chain drive system when impacted by falling coal are investigated by means of test. The impact test bench of scraper conveyor was set up to analyze the effects of chain speed, impact height and impact load mass on the dynamic characteristics of the chain drive system of scraper conveyor under the working conditions of unloaded and loaded. The results show that the longitudinal vibration of the scraper conveyor is most obvious when it is impacted by the falling coal, and the chain speed, impact height and impact load mass of the scraper conveyor all play an excitation role on the vibration of the chain drive system, and the vibration of the chain ring is the most intense in the chain drive system, and the loaded coal pile conveyed on the scraper conveyor plays an inhibiting role on the vibration of the chain drive system. This study can help to identify the location where the scraper conveyor fails first in the impact condition, so as to provide a basis for its structural design and improvement, which is of great significance for the stable operation and structural optimization of the scraper conveyor. [ABSTRACT FROM AUTHOR]

To study the influence of the gangue content of coal gangue particles on the vibration signal of the tail beam under sliding condition, this paper combines three-dimensional(3D) laser scanning technology with the finite element method, establishes a finite element model of the real shape of coal gangue particles and the hydraulic support in top coal caving in LS-DYNA, analyzes the influence of gangue content on some characteristics of the acceleration signal on the tail beam in the time and frequency domains, and then studies the influence of the size and total mass of the rock, and the angle of the tail beam on the characteristics. The following conclusions are obtained: when the coal gangue particles slip on the tail beam, an increase in gangue content significantly improves the effective value of the acceleration signal of the tail beam in the time domain and the average power and average amplitude in the frequency domain. With different sizes, total masses, and tail beam angles, the increase in gangue content always causes an increase in acceleration signal characteristics. In terms of the influence of various factors on the same gangue content, at the same total mass, the larger the rock mass size is, the faster the characteristic value increases with the increase in gangue content. The greater the total mass, the greater the value of the acceleration signal characteristics. A smaller angle between the tail beam and the ground increases the value of each characteristic. The results of this study provide a reference for further research on coal gangue identification based on vibrations. [ABSTRACT FROM AUTHOR]

To improve the safety and the stability of the support under mines and reduce the cost, we design a new slipper-type hydraulic support with energy-efficiency and high reliability. To study its dynamics, we build a reverse kinematics model. We analyze the motion and the force for each component of the new support with a simulation in Matlab/Simulink. The results show that it has appropriate structures with the required four-bar linkages. To compare the performance between the new slipper-type support and the traditional support, we design their mechanics models, deduce their mechanics relations and obtain the force curves for each component of both supports under the same loads. The results prove that the new slipper-type support has less demand on oil pressure for the hydraulic cylinder when working at middle and high positions and it has a larger supporting force and a higher supporting stability which would be more energy-efficient. [ABSTRACT FROM AUTHOR]