Search

Microliths–small, retouched, often-backed stone tools–are often interpreted to be the product of composite tools, including projectile weapons, and efficient hunting strategies by modern humans. In Europe and Africa these lithic toolkits are linked to hunting of medium- and large-sized game found in grassland or woodland settings, or as adaptations to risky environments during periods of climatic change. Here, we report on a recently excavated lithic assemblage from the Late Pleistocene cave site of Fa-Hien Lena in the tropical evergreen rainforest of Sri Lanka. Our analyses demonstrate that Fa-Hien Lena represents the earliest microlith assemblage in South Asia (c. 48,000–45,000 cal. years BP) in firm association with evidence for the procurement of small to medium size arboreal prey and rainforest plants. Moreover, our data highlight that the lithic technology of Fa-Hien Lena changed little over the long span of human occupation (c. 48,000–45,000 cal. years BP to c. 4,000 cal. years BP) indicating a successful, stable technological adaptation to the tropics. We argue that microlith assemblages were an important part of the environmental plasticity that enabled Homo sapiens to colonise and specialise in a diversity of ecological settings during its expansion within and beyond Africa. The proliferation of diverse microlithic technologies across Eurasia c. 48–45 ka was part of a flexible human ‘toolkit’ that assisted our species’ spread into all of the world’s environments, and the development of specialised technological and cultural approaches to novel ecological situations. [ABSTRACT FROM AUTHOR]

In this paper we describe two assemblages of flint retouchers or “bulb retouchers” retrieved from Nesher Ramla and Quneitra, two Middle Palaeolithic, open-air sites in the Levant. The site of Nesher Ramla yielded the largest assemblage of bulb retouchers (n = 159) currently known, allowing a detailed investigation of this poorly known phenomenon. An extensive experimental program and use-wear analysis enabled us to characterize the different sets of traces related to the retouching activity and to identify different motions applied by the knappers in the course of this action. In both sites, blanks used as bulb retouchers were almost exclusively retouched items, with a special emphasis on convergent morphotypes in Nesher Ramla. The use of retouched items as bulb retouchers is a common trait over different time spans and geographical areas. Our data suggests that bulb retouchers were versatile, multi-purpose tools with a long use-life, transported over long distances as components of the hunter-gatherer mobile tool kit. The high frequencies of bulb retouchers within some archaeological units of Nesher Ramla appear to be connected to the highly curated nature of the lithic assemblages, in turn reflecting a high mobility of the human groups that produced them. [ABSTRACT FROM AUTHOR]

Complex projectiles—propulsion via mechanical aid—are considered an important technological innovation, with possible relevance for the successful Out-of-Africa dispersal of our species. Conclusive evidence for the beginning of this technology, however, is lacking from the early Late Pleistocene (ca. 130 to 70 thousand years ago; ka). Given the extremely limited applicability of relatively robust methods for validating stone-tipped projectile use, such as through fracture propagation velocity, converging lines of circumstantial evidence remain the best way to examine early complex projectiles. We assess here suggestions for an early Late Pleistocene origin of complex projectiles in Africa. Results from both previous and present independent approaches suggest a trajectory in which complex projectiles were likely adopted during the early Late Pleistocene in eastern Africa. At Aduma (Middle Awash, Ethiopia), morphometric, hafting, and impact damage patterns in several lithic point assemblages suggest a shift from simple spear technologies (thrusting and/or hand-cast) to complex projectiles. Broadly dated to 80–100 ka, lithic points from later phases of the Aduma succession represent a particularly strong candidate for projectile armatures most comparable to ethnographically known spearthrower darts, lending support for previous suggestions and warranting further investigations. [ABSTRACT FROM AUTHOR]

Neanderthals had complex land use patterns, adapting to diversified landscapes and climates. Over the past decade, considerable progress has been made in reconstructing the chronology, land use and subsistence patterns, and occupation types of sites in the Rhône Valley, southeast France. In this study, Neanderthal mobility at the site of Payre is investigated by combining information from lithic procurement analysis (“chaîne evolutive” and “chaîne opératoire” concepts) and strontium isotope analysis of teeth (childhood foraging area), from two units (F and G). Both units date to the transition from Marine Isotope Stage (MIS) 8 to MIS 7, and show similar environmental conditions, but represent contrasting occupation durations. Level Gb (unit G) represents a long-term year-round use, in contrast to short-term seasonal use of the cave in level Fb (unit F). For both levels, lithic material and food were generally collected from a local to semi-local region. However, in level Gb, lithic materials were mainly collected from colluviums and food collected in the valley, whereas in level Fb, lithic procurement focused primarily on alluvial deposits and food was collected from higher elevation plateaus. These procurement or exchange patterns might be related to flint availability, knapping advantages of alluvial flint or occupation duration. The site of Payre is located in a flint rich circulation corridor and the movement of groups or exchanges between groups were organized along a north-south axis on the plateaus or towards the east following the river. The ridges were widely used as they are rich in flint, whereas the Rhône Valley is not an important source of lithic raw materials. Compared to other western European Middle Palaeolithic sites, these results indicate that procurement strategies have a moderate link with occupation types and duration, and with lithic technology. The Sr isotope ratios broadly match the proposed foraging areas, with the Rhône Valley being predominantly used in unit G and the ridges and limestone plateaus in unit F. While lithic reconstructions and childhood foraging are not directly related this suggests that the three analysed Neanderthals spend their childhood in the same general area and supports the idea of mobile Neanderthals in the Rhône Valley and neighbouring higher elevation plateaus. The combination of reconstructing lithic raw material sources, provisioning strategies, and strontium isotope analyses provides new details on how Neanderthals at Payre practised land use and mobility in the Early Middle Palaeolithic. [ABSTRACT FROM AUTHOR]

The lithic assemblage from Shizitan 29, a late Upper Paleolithic open-air site in Shanxi, China, provides evidence for the earliest, well-dated microblade production in East Asia, ca. 26/24 Ka cal BP. To pursue a behavioral rather than traditional typological understanding of this key adaptive technology, we apply a techno-functional approach that enables us to reconstruct the entire operational sequence in behavioral terms through the derivation of technical objectives. This methodology can serve as a model to be applied to other assemblages for greater understanding of the origins and spread of the broadly distributed eastern Asian Late Pleistocene microblade industries. Within the eight cultural layers at Shizitan 29, microblade production abruptly appears at the top of Layer 7 following earlier core-and-flake production, supporting hypotheses of microblade technology arising within adaptive strategies to worsening Late Glacial Maximum environments. Significantly, reconstruction of the operational sequence supports microblade technology being introduced into the North China Loess Plateau from regions further north. It also allows us to re-think microblades’ relationship in behavioral terms with earlier limited examples of East Asian blade production and the evolution and spread of microblade technology, providing new insights into the adaptive relationships between subsequent microblade productions. [ABSTRACT FROM AUTHOR]

The procurement of high-quality lithic resources is amongst the most indicative processes of decision-making in the archaeology of early human groups peopling the Americas. Directly dated deposits from quarry workshops have been absent of the late Pleistocene record of South America. We present the results of the excavations of a high-quality translucent quartz crystal workshop that yielded radiocarbon-dated coherently layered stratigraphic deposits that shed light into the behavior of the initial stages of lithic procurement. Based on a detailed analysis of the context of the Valiente site (32° S, Chile, South America), we discuss the stages of bifacial production of point technology. The deposit produced evidence of cumulative occupations over the period between 12,630 and 11,320 calibrated years before present. This ~1,300-year span is coincidental with a major environmental step-wise drying trend as indicated by the local and regional pollen records. Furthermore, it is synchronous to the process in which natural landscapes became the earliest taskscapes in the region, thereby encompassing major cultural changes related to the organization of the land use. These results are discussed in the frame of contemporaneous archaeological data to discuss specific aspects of technology and decision-making of the earliest settlers of South America. [ABSTRACT FROM AUTHOR]

Howiesons Poort (HP) sites, over the past decades, have provided exceptional access to anthropogenic remains that are enhancing our understanding of early modern human behaviour during the Middle Stone Age in southern Africa. Here, we analyse the technological and typological trends in the lithic record that form part of these behaviours, based on the HP sequence recently excavated at Klipdrift Shelter, located on the southern Cape coast of South Africa. This study contributes to enhance knowledge on the mechanisms of changes that occurred during the transition to the post-HP. Despite patterns of continuity observed, notably for core reduction methods, the seven successive lithic assemblages show significant changes in the typological characteristics and raw material selection but also in the relative importance of blade production over time. However, these changes are not necessarily synchronic and occur either as gradual processes or as abrupt technological shifts. Consequently, we cross-examine the association between the lithic phasing and other anthropogenic remains within the HP sequence at Klipdrift Shelter. We explore the implications of these patterns of changes in terms of cultural behaviours and population dynamics during the HP and we highlight the relationship between the different phases of the HP sequence at Klipdrift Shelter and those from other South African HP sites. [ABSTRACT FROM AUTHOR]

In the past few decades, a diverse array of research has emphasized the precocity of technically advanced and symbolic practices occurring during the southern African Middle Stone Age. However, uncertainties regarding the regional chrono-cultural framework constrain models and identification of the cultural and ecological mechanisms triggering the development of such early innovative behaviours. Here, we present new results and a refined chronology for the Pietersburg, a techno-complex initially defined in the late 1920’s, which has disappeared from the literature since the 1980’s. We base our revision of this techno-complex on ongoing excavations at Bushman Rock Shelter (BRS) in Limpopo Province, South Africa, where two Pietersburg phases (an upper phase called ‘21’ and a lower phase called ‘28’) are recognized. Our analysis focuses on the ‘28’ phase, characterized by a knapping strategy based on Levallois and semi-prismatic laminar reduction systems and typified by the presence of end-scrapers. Luminescence chronology provides two sets of ages for the upper and lower Pietersburg of BRS, dated respectively to 73±6ka and 75±6ka on quartz and to 91±10ka and 97±10ka on feldspar, firmly positioning this industry within MIS5. Comparisons with other published lithic assemblages show technological differences between the Pietersburg from BRS and other southern African MIS5 traditions, especially those from the Western and Eastern Cape. We argue that, at least for part of MIS5, human populations in South Africa were regionally differentiated, a process that most likely impacted the way groups were territorially and socially organized. Nonetheless, comparisons between MIS5 assemblages also indicate some typological similarities, suggesting some degree of connection between human groups, which shared similar innovations but manipulated them in different ways. We pay particular attention to the end-scrapers from BRS, which represent thus far the earliest documented wide adoption of such tool-type and provide further evidence for the innovative processes characterizing southern Africa from the MIS5 onwards. [ABSTRACT FROM AUTHOR]

Evidence for fire use becomes increasingly sparse the further back in time one looks. This is especially true for Palaeolithic assemblages. Primary evidence of fire use in the form of hearth features tends to give way to clusters or sparse scatters of more durable heated stone fragments. In the absence of intact fireplaces, these thermally altered lithic remains have been used as a proxy for discerning relative degrees of fire use between archaeological layers and deposits. While previous experimental studies have demonstrated the physical effects of heat on stony artefacts, the mechanisms influencing the proportion of fire proxy evidence within archaeological layers remain understudied. This fundamental study is the first to apply a computer-based model (fiReproxies) in an attempt to simulate and quantify the complex interplay of factors that ultimately determine when and in what proportions lithic artefacts are heated by (anthropogenic) fires. As an illustrative example, we apply our model to two hypothetical archaeological layers that reflect glacial and interglacial conditions during the late Middle Palaeolithic within a generic simulated cave site to demonstrate how different environmental, behavioural and depositional factors like site surface area, sedimentation rate, occupation frequency, and fire size and intensity can, independently or together, significantly influence the visibility of archaeological fire signals. [ABSTRACT FROM AUTHOR]

Twenty-Seven Lower and Middle Paleolithic sites from Europe and the Middle East are reported in the literature to have yielded incised stones. At eleven of these sites incisions are present on flint cortexes. Even when it is possible to demonstrate that the engravings are ancient and human made, it is often difficult to distinguish incisions resulting from functional activities such as butchery or use as a cutting board, from those produced deliberately, and even more difficult to identify the scope of the latter. In this paper we present results of the analysis of an engraved cortical flint flake found at Kiik-Koba, a key Mousterian site from Crimea, and create an interpretative framework to guide the interpretation of incised cortexes. The frame of inference that we propose allows for a reasoned evaluation of the actions playing a role in the marking process and aims at narrowing down the interpretation of the evidence. The object comes from layer IV, the same layer in which a Neanderthal child burial was unearthed, which contains a para-Micoquian industry of Kiik-Koba type dated to between c.35 and 37 cal kyr BP. The microscopic analysis and 3D reconstruction of the grooves on the cortex of this small flint flake, demonstrate that the incisions represent a deliberate engraving made by a skilled craftsman, probably with two different points. The lines are nearly perfectly framed into the cortex, testifying of well controlled motions. This is especially the case considering the small size of the object, which makes this a difficult task. The production of the engraving required excellent neuromotor and volitional control, which implies focused attention. Evaluation of the Kiik-Koba evidence in the light of the proposed interpretative framework supports the view that the engraving was made with a representational intent. [ABSTRACT FROM AUTHOR]

Most Chinese lithic industries dated between 300,000 and 40,000 are characterized by the absence of Levallois debitage, the persistence of core-and-flake knapping, the rarity of prepared cores, their reduction with direct hard hammer percussion, and the rarity of retouched flakes. Here we report the discovery of seven bone soft hammers at the early hominin Lingjing site (Xuchang County, Henan) dated to 125,000–105,000. These artefacts represent the first instance of the use of bone as raw material to modify stone tools found at an East Asian early Late Pleistocene site. Three types of soft hammers are identified. The first consists of large bone flakes resulting from butchery of large herbivores that were utilized as such for expedient stone tools retouching or resharpening. The second involved the fracture of weathered bone from medium size herbivores to obtain elongated splinters shaped by percussion into sub-rectangular artefacts. Traces observed on these objects indicate intensive and possibly recurrent utilization, which implies their curation over time. The last consists of antler, occasionally used. Lingjing bone tools complement what we know about archaic hominin cultural adaptations in East Asia and highlight behavioural consistencies that could not be inferred from other cultural proxies. This discovery provides a new dimension to the debate surrounding the existence of the Middle Palaeolithic in the region. The attribution of East Asian sites to the Middle Palaeolithic assumes that cultural traits such as the Levallois method represent evolutionary hallmarks applicable to regions of the world different from those in which they were originally found. Here, we promote an approach that consists in identifying, possibly from different categories of material culture, the original features of each regional cultural trajectory and understanding the behavioural and cognitive implications they may have had for past hominin populations. [ABSTRACT FROM AUTHOR]

We use stone tool refitting to assess palimpsest formation and stratigraphic integrity in the basal units of the Gruta da Oliveira archeo-stratigraphic sequence, layers 15–27, which TL and U-series dating places in late Marine Isotope Stage (MIS) 5 or early MIS 4. As in most karst contexts, the formation of this succession involved multiple and complex phenomena, including subsidence, bioturbation, carnivore activity and runoff as agents of potential post-depositional disturbance. During phases of stabilization, such as represented by layers 15, 21 and 22, the excavated area was inhabited and refits corroborate that post-depositional displacement is negligible. Layers 23–25 and 16–19 correspond to subdivisions that slice thick geological units primarily formed of material derived from the cave’s entrance via slope dynamics. Refit links are consistent with rapid fill-up of the interstitial spaces found in the Karren-like bedrock (for layers 23–25), or left between large boulders after major roof-collapse events (for layers 16–19). Layers 26 (the “Mousterian Cone”) and 27 are a “bottom-of-hourglass” deposit underlying the main sedimentary body; the refits show that this deposit consists of material derived from layers 15–25 that gravitated through fissures open in the sedimentary column above. Layer 20, at the interface between two major stratigraphic ensembles, requires additional analysis. Throughout, we found significant vertical dispersion along the contact between sedimentary fill and cave wall. Given these findings, a preliminary analysis of technological change across the studied sequence organized the lithic assemblages into five ensembles: layer 15; layers 16–19; layer 20; layers 21–22; layers 23–25. The lower ensembles show higher percentages of flint and of the Levallois method. Uniquely at the site, the two upper ensembles feature bifaces and cleavers. [ABSTRACT FROM AUTHOR]

During the Nubia Salvage Campaign and the subsequent expeditions from the 1960’s to the 1980’s, numerous sites attributed to the Late Palaeolithic (~25–15 ka) were found in the Nile Valley, particularly in Nubia and Upper Egypt. This region is one of the few to have allowed human occupations during the dry Marine Isotope Stage 2 and is therefore key to understanding how human populations adapted to environmental changes at this time. This paper focuses on two sites located in Upper Egypt, excavated by the Combined Prehistoric Expedition: E71K18, attributed to the Afian industry and E71K20, attributed to the Silsilian industry. It aims to review the geomorphological and chronological evidence of the sites, present a technological analysis of the lithic assemblages in order to provide data that can be used in detailed comparative studies, which will allow discussion of technological variability in the Late Palaeolithic of the Nile Valley and its place within the regional context. The lithic analysis relies on the chaîne opératoire concept combined with an attribute analysis to allow quantification. This study (1) casts doubts on the chronology of E71K18 and related Afian industry, which could be older or younger than previously suggested, highlights (2) distinct technological characteristics for the Afian and the Silsilian, as well as (3) similar technological characteristics which allow to group them under a same broad techno-cultural complex, distinct from those north or south of the area. [ABSTRACT FROM AUTHOR]

In the scenario of the spread of the anatomically modern humans (AMHs) into Europe, the techno-complex known as Protoaurignacian is defined by the production of blades and bladelets within a single and continuous stone knapping sequence from the same core as the result of its progressive reduction. However, the growing re-evaluation of some assemblages is revealing that bladelets are frequently obtained from independent reduction sequences, hence discouraging the direct application of the model developed in southwestern France. High-resolution regional signatures are thus needed to reconstruct a more accurate portrait of the AMH colonization dynamic. Northeastern Italy, with the key site of Fumane Cave, is one among the regions of Mediterranean Europe worthy of consideration for reconstructing this colonization process and its cultural dynamics. Within the framework of a critical discussion of the technological definition of the Protoaurignacian and its relationship with contemporaneous industries on a regional and supra-regional scale, we present the results of a detailed analysis of the lithic technology from units A2-A1 based on reduction sequence and attribute analyses. Results show that bladelets are the first goal of production and they do not originate from reduced blade cores but from a broad range of independent and simultaneous core reduction strategies. One implication is that the most commonly used technological trait that is said to define the Protoaurignacian has been over-emphasized and that the Protoaurignacian is technologically consistent across its geographical extent. Additional data based on carinated core technology imply that this techno-complex shares a common technological background with the Early Aurignacian and that no features are restricted to one of the two facies. Furthermore, the major difference between the Protoaurignacian and Early Aurignacian appears to be more typological in nature, with retouched bladelets being less common in the Early Aurignacian. [ABSTRACT FROM AUTHOR]

This paper focuses on the technological characteristics of Keilmesser with a lateral tranchet blow modification on the cutting edge. It examines the underlying technological production of these bifacial objects: this implies the evaluation of their working stage succession, as well as produced forms necessary for the execution of tranchet blow performance. Furthermore, it offers a techno-morphological description of these enigmatic tools. The Keilmesser with tranchet blow and corresponding blanks of tranchet blows from Grotte de la Verpillière I in Germolles (Saône-et-Loire, France) are used as case study. The collection of Keilmesser with tranchet blow and corresponding blanks of tranchet blow has been massively expanded with new fieldwork and the review of ancient assemblages. The majority of the pieces were made on blanks from local raw material. The evaluation of the underlying production concept shows that a Keilmesser with tranchet blow, regardless of the wide range of morphologies and matrix size, always consists of specific parts that are necessary for the production sequence and the assumed function. The production of these pieces follows highly specific working stages, some of which can be interchanged in sequence. However, it is always the goal to obtain a low-angled cutting edge. The performance of a tranchet blow is not only an integral part of production, but it is rather the aim of the entire production. [ABSTRACT FROM AUTHOR]

In the second half of the 19th century Pleistocene faunas were discovered in two sites, Sedia del Diavolo and Monte delle Gioie, contained in deposits of the Aniene River in the area of Rome (Latium, Italy). Fieldwork by A.C. Blanc in the late 1930’s proved the association of fauna and lithic industry within fluvial deposits interbedded with volcanoclastic layers. A human femoral diaphysis and a metatarsal were later identified in the faunal assemblage from Sedia del Diavolo and evaluated as Neandertal. The lithic assemblages from these two sites were the basis of the definition of the Protopontinian by M. Taschini, which she viewed as a late Middle Pleistocene industry very similar to the later, Upper Pleistocene Pontinian industries, thought to be characteristic of the Latium Mousterian. The chronostratigraphic framework of the Aniene river deposits has been recently updated and the lithic assemblages from these two sites are now confidently dated between 295 and 290 ka, close to the transition from MIS 9 to MIS 8. They fit chronologically between the industries of layers m and d from Torre in Pietra, a site 26 km northwest of Rome. The presence of the Levallois debitage is indisputable yet it occurs within an original technical context, different from what is known in other early occurrences of the Levallois. The date confirms the proposed chronology for the early Levallois in Europe. More importantly these two assemblages demonstrate that this technology can emerge in more diversified contexts than usually described. This suggests that its dispersal in Europe may have been rapid. [ABSTRACT FROM AUTHOR]

We evaluate the cultural variation between the youngest Howiesons Poort layer (GR) and the oldest post-Howiesons Poort layers (RB-YA) of Sibudu Cave (KwaZulu-Natal, South Africa). We first conducted a technological analysis, secondly we performed a cladistic study with all the technological traits and, finally, we compare the technological variability with other data from Sibudu (ochre, micromorphology, fauna and plant remains). The synapomorphies of the cladistical analysis show numerous lithic technological changes between the youngest Howiesons Poort and the oldest post-Howiesons Poort layers as previously concluded. However, some technological strategies that are present, yet uncommon, in the Howiesons Poort become abundant in the overlying layers, whereas others that were fundamental to the Howiesons Poort continue, but are poorly represented in the overlying layers. We further show that lithic technological strategies appear and disappear as pulses in the post-Howiesons Poort layers studied. Among the most notable changes in the post-Howiesons Poort layers is the importance of flake production from discoidal knapping methods, the unstandardized retouched pieces and their infrequent representation, and the higher than usual frequency of grindstones. We evaluate various hypotheses to explain the transformation of a Howiesons Poort formal industry to a more ‘expedient’ assemblage. Since no marked environmental changes are contemporary with the technological transformation, a change in residential mobility patterns seems a plausible explanation. This hypothesis is supported by the changes observed in stratigraphy, lithic technology, site management, ochre and firewood collection. [ABSTRACT FROM AUTHOR]

Donggutuo (DGT) is one of the richest archaeological localities in the Nihewan Basin of North China, thereby providing key information about the technological behaviours of early hominins in eastern Asia. Although DGT has been subject of multiple excavations and technological studies over the past several decades, few detailed studies on the lithic assemblages have been published. Here we summarize and describe the DGT lithic assemblages, examining stone tool reduction methods and technological skills. DGT dates to ca. 1.1 Ma, close to the onset of the mid-Pleistocene climate transition (MPT), indicating that occupations at DGT coincided with increased environmental instability. During this time interval, the DGT knappers began to apply innovative flaking methods, using free hand hard hammer percussion (FHHP) to manufacture pre-determined core shapes, small flakes and finely retouched tools, while occasionally using the bipolar technique, in contrast to the earlier and nearby Nihewan site of Xiaochangliang (XCL). Evidence for some degree of planning and predetermination in lithic reduction at DGT parallels technological developments in African Oldowan sites, suggesting that innovations in early industries may be situational, sometimes corresponding with adaptations to changes in environments and local conditions. [ABSTRACT FROM AUTHOR]

The study of the lithic assemblages of two French sites, the Bau de l’Aubesier and Payre, contributes new knowledge of the earliest Neanderthal techno-cultural variability. In this paper we present the results of a detailed technological analysis of Early Middle Palaeolithic lithic assemblages of MIS 8 and 7 age from the two sites, which are located on opposite sides of the Rhône Valley in the south-east of France. The MIS 9–7 period is considered in Europe to be a time of new behaviours, especially concerning lithic strategies. The shift from the Lower Palaeolithic to the Early Middle Palaeolithic is “classically” defined by an increase in the number of core technologies, including standardized ones, which are stabilized in the full Middle Palaeolithic (MIS 5–3), associated with the decline of the “Acheulean” biface. Applying a common technological approach to the analysis of the two assemblages highlights their technological variability with respect to reduction systems and end products. Differences between Payre and the Bau de l’Aubesier concerning raw material procurement and faunal exploitation only partially explain this multifaceted technological variability, which in our opinion also reflects the existence of distinct technological strategies within the same restricted geographic area, which are related to distinct traditions, site uses, and/or as yet unknown parameters. [ABSTRACT FROM AUTHOR]

There are multiple hypotheses for human responses to glacial cycling in the Late Pleistocene, including changes in population size, interconnectedness, and mobility. Lithic technological analysis informs us of human responses to environmental change because lithic assemblage characteristics are a reflection of raw material transport, reduction, and discard behaviors that depend on hunter-gatherer social and economic decisions. Pinnacle Point Site 5–6 (PP5-6), Western Cape, South Africa is an ideal locality for examining the influence of glacial cycling on early modern human behaviors because it preserves a long sequence spanning marine isotope stages (MIS) 5, 4, and 3 and is associated with robust records of paleoenvironmental change. The analysis presented here addresses the question, what, if any, lithic assemblage traits at PP5-6 represent changing behavioral responses to the MIS 5-4-3 interglacial-glacial cycle? It statistically evaluates changes in 93 traits with no a priori assumptions about which traits may significantly associate with MIS. In contrast to other studies that claim that there is little relationship between broad-scale patterns of climate change and lithic technology, we identified the following characteristics that are associated with MIS 4: increased use of quartz, increased evidence for outcrop sources of quartzite and silcrete, increased evidence for earlier stages of reduction in silcrete, evidence for increased flaking efficiency in all raw material types, and changes in tool types and function for silcrete. Based on these results, we suggest that foragers responded to MIS 4 glacial environmental conditions at PP5-6 with increased population or group sizes, ‘place provisioning’, longer and/or more intense site occupations, and decreased residential mobility. Several other traits, including silcrete frequency, do not exhibit an association with MIS. Backed pieces, once they appear in the PP5-6 record during MIS 4, persist through MIS 3. Changing paleoenvironments explain some, but not all temporal technological variability at PP5-6. [ABSTRACT FROM AUTHOR]

North American lithic analysis often assigns biface preforms to discrete, successive stages defined in Callahan’s influential study. Yet recent research questions the stage concept, emphasizing instead a continuous view of the reduction process. To compare stage and continuum approaches, their assumptions are tested in experimental replicas, including Callahan’s, and empirical Paleoindian preform assemblages. In these samples, biface reduction is a process that can be tracked and measured by continuous measures of size and reduction allometry. The process is characterized by continuous variation in the rate at which preform weight declines with preform volume. That is, weight declines at an ever-declining rate through the production process. Reduction is complex, but understood better as an allometric process than as a sequence of technological stages. “Stage” may be a useful heuristic or summary device, but preform assemblages should be analyzed in detail to reveal the continuous allometric processes that govern biface production. [ABSTRACT FROM AUTHOR]

The development of the Azilian in Western Europe 14,000 years ago is considered a “revolution” in Upper Paleolithic Archaeology. One of the main elements of this rapid social restructuring is the abandonment of naturalistic figurative art on portable pieces or on cave walls in the Magdalenian in favor of abstract expression on small pebbles. Recent work shows that the transformation of human societies between the Magdalenian and the Azilian was more gradual. The discovery of a new Early Azilian site with decorated stones in France supports this hypothesis. While major changes in stone tool technology between the Magdalenian and Azilian clearly mark important adaptive changes, the discovery of 45 engraved schist tablets from archaeological layers at Le Rocher de l’Impératrice attests to iconographic continuity together with special valorization of aurochs as shown by a “shining” bull depiction. This evidence suggests that some cultural features such as iconography may lag far behind technological changes. We also argue that eventual change in symbolic expression, which includes the later disappearance of figurative art, provides new insight into the probable restructuring of the societies. [ABSTRACT FROM AUTHOR]

We revise the chronostratigraphy of several sedimentary successions cropping out along a 5 km-long tract of the Aniene River Valley in Rome (Italy), which yielded six hominin remains previously attributed to proto- or archaic Neanderthal individuals, as well as a large number of lithic artefacts showing intermediate characteristics somewhere between the local Acheulean and Mousterian cultures. Through a method of correlation of aggradational successions with post-glacial sea-level rises, relying on a large set of published 40Ar/39Ar ages of interbedded volcanic deposits, we demonstrate that deposition of the sediments hosting the human remains spans the interval 295–220 ka. This is consistent with other well constrained ages for lithic industries recovered in England, displaying transitional features from Lower to Middle Paleolithic, suggesting the appearance of Mode 3 during the MIS 9-MIS 8 transition. Moreover, the six human bone fragments recovered in the Aniene Valley should be regarded as the most precisely dated and oldest hominin remains ascribable to Neanderthal-type individuals in Europe, discovered to date. The chronostratigraphic study presented here constitutes the groundwork for addressing re-analysis of these remains and of their associated lithic industries, in the light of their well-constrained chronological picture. [ABSTRACT FROM AUTHOR]

The Middle Pleistocene site of Ambrona (Soria, Spain) is a major reference for European Acheulean studies. The origin of the lithic and fauna accumulations at this site was first thought to be anthropogenic, but later studies showed that it was mainly natural. The first person to conduct excavations at the Ambrona site was the Marquis of Cerralbo, in 1914; other research groups followed in more recent times (the Howell & Freeman team and the Santonja & Pérez-González team). The digs yielded a great amount of information, but until now it had never been unified. In this paper, we compile all the available published and unpublished excavation documentation from the 1960s to the present. We use these maps and sections to present our spatial study of the LSM (Lower Stratigraphic Member) at the Ambrona site, combining stratigraphic criteria with GIS density and orientation analysis. This study enabled us to define the main concentrations of the LSM, providing an initial contribution to an assessment of their accumulation processes. Most of the concentrations preserved in the ancient shore area of the site display marked orientation patterns which coincide with the direction of the main water flows into the Ambrona wetland. However, random orientation patterns were observed in the central part of the site (Alpha concentration); they may be mostly preserved without undergoing transport processes, as previous taphonomic studies also confirm. [ABSTRACT FROM AUTHOR]

The notion that the evolution of core reduction strategies involved increasing efficiency in cutting edge production is prevalent in narratives of hominin technological evolution. Yet a number of studies comparing two different knapping technologies have found no significant differences in edge production. Using digital analysis methods we present an investigation of raw material efficiency in eight core technologies broadly representative of the long-term evolution of lithic technology. These are bipolar, multiplatform, discoidal, biface, Levallois, prismatic blade, punch blade and pressure blade production. Raw material efficiency is assessed by the ratio of cutting edge length to original core mass. We also examine which flake attributes contribute to maximising raw material efficiency, as well as compare the difference between expert and intermediate knappers in terms of cutting edge produced per gram of core. We identify a gradual increase in raw material efficiency over the broad sweep of lithic technological evolution. The results indicate that the most significant transition in efficiency likely took place with the introduction of small foliate biface, Levallois and prismatic blade knapping, all introduced in the Middle Stone Age / Middle Palaeolithic among early Homo sapiens and Neanderthals. This suggests that no difference in raw material efficiency existed between these species. With prismatic blade technology securely dated to the Middle Palaeolithic, by including the more recent punch and pressure blade technology our results dispel the notion that the transition to the Upper Palaeolithic was accompanied by an increase in efficiency. However, further increases in cutting edge efficiency are evident, with pressure blades possessing the highest efficiency in this study, indicating that late/epi-Palaeolithic and Neolithic blade technologies further increased efficiency. [ABSTRACT FROM AUTHOR]

A long held view about the occupation of southern proto-Jê pit house villages of the southern Brazilian highlands is that these sites represent cycles of long-term abandonment and reoccupation. However, this assumption is based on an insufficient number of radiocarbon dates for individual pit houses. To address this problem, we conducted a programme of comprehensive AMS radiocarbon dating and Bayesian modelling at the deeply stratified oversized pit House 1, Baggio I site (Cal. A.D. 1395–1650), Campo Belo do Sul, Santa Catarina state, Brazil. The stratigraphy of House 1 revealed an unparalleled sequence of twelve well preserved floors evidencing a major change in occupation dynamics including five completely burnt collapsed roofs. The results of the radiocarbon dating allowed us to understand for the first time the occupation dynamics of an oversized pit house in the southern Brazilian highlands. The Bayesian model demonstrates that House 1 was occupied for over two centuries with no evidence of major periods of abandonment, calling into question previous models of long-term abandonment. In addition, the House 1 sequence allowed us to tie transformations in ceramic style and lithic technology to an absolute chronology. Finally, we can provide new evidence that the emergence of oversized domestic structures is a relatively recent phenomenon among the southern proto-Jê. As monumental pit houses start to be built, small pit houses continue to be inhabited, evidencing emerging disparities in domestic architecture after AD 1000. Our research shows the importance of programmes of intensive dating of individual structures to understand occupation dynamics and site permanence, and challenges long held assumptions that the southern Brazilian highlands were home to marginal cultures in the context of lowland South America. [ABSTRACT FROM AUTHOR]

Xiaochangliang (XCL), located in the Nihewan Basin of North China, is a key archaeological locality for understanding the behavioural evolution of early humans. XCL dates to ca. 1.36 Ma, making it one of the earliest sites in Northeast Asia. Although XCL represents the first excavation of an Early Pleistocene site in the Nihewan Basin, identified and excavated in the 1970’s, the lithic assemblages have never been published in full detail. Here we describe the lithic assemblages from XCL, providing information on stone tool reduction techniques and the influence of raw materials on artefact manufacture. The XCL hominins used both bipolar and freehand reduction techniques to manufacture small flakes, some of which show retouch. Bipolar reduction methods at XCL were used more frequently than previously recognized. Comparison of XCL with other Early Pleistocene sites in the Nihewan Basin indicates the variable use of bipolar and freehand reduction methods, thereby indicating a flexible approach in the utilization of raw materials. The stone tools from XCL and the Nihewan sites are classifiable as Mode I lithic assemblages, readily distinguished from bifacial industries manufactured by hominins in Eastern Asia by ca. 800 ka. [ABSTRACT FROM AUTHOR]

There appears to be little doubt as to the existence of an intentional technological resolve to produce convergent tools during the Middle Palaeolithic. However, the use of these pieces as pointed tools is still subject to debate: i.e., handheld tool vs. hafted tool. Present-day technological analysis has begun to apply new methodologies in order to quantify shape variability and to decipher the role of the morphology of these pieces in relation to function; for instance, geometric morphometric analyses have recently been applied with successful results. This paper presents a study of this type of analysis on 37 convergent tools from level Ga of Payre site (France), dated to MIS 8–7. These pieces are non-standardized knapping products produced by discoidal and orthogonal core technologies. Moreover, macro-wear studies attest to various activities on diverse materials with no evidence of hafting or projectile use. The aim of this paper is to test the geometric morphometric approach on non-standardized artefacts applying the Elliptical Fourier analysis (EFA) to 3D contours and to assess the potential relationship between size and shape, technology and function. This study is innovative in that it is the first time that this method, considered to be a valuable complement for describing technological and functional attributes, is applied to 3D contours of lithic products. Our results show that this methodology ensures a very good degree of accuracy in describing shape variations of the sharp edges of technologically non-standardized convergent tools. EFA on 3D contours indicates variations in deviations of the outline along the third dimension (i.e., dorso-ventrally) and yields quantitative and insightful information on the actual shape variations of tools. Several statistically significant relationships are found between shape variation and use-wear attributes, though the results emphasize the large variability of the shape of the convergent tools, which, in general, does not show a strong direct association with technological features and function. This is in good agreement with the technological context of this chronological period, characterized by a wide diversity of non-standardized tools adapted to multipurpose functions for varied subsistence activities. [ABSTRACT FROM AUTHOR]

This study focuses on Kaizer Hill, a quarry site located in the vicinity of the city of Modiin where remains of a single prehistoric cultural entity assigned to the Pre-Pottery Neolithic A were discovered. A systematic survey revealed that large-scale quarrying activities have left damage markings on the bedrock of the Hilltop and its slopes. We aim to present here our findings from the Hilltop, which are concerned with the human impact on rock surfaces and the lithic artifacts retrieved during the survey. It is evident that the Pre-Pottery Neolithic A inhabitants of the area changed their landscape forever, “stripping” the caliche surface and penetrating it in search of flint bedded in the bedrock. [ABSTRACT FROM AUTHOR]

Recent research suggests that variation exists among and between Oldowan stone tool assemblages. Oldowan variation might represent differential constraints on raw materials used to produce these stone implements. Alternatively, variation among Oldowan assemblages could represent different methods that Oldowan producing hominins utilized to produce these lithic implements. Identifying differential patterns of stone tool production within the Oldowan has implications for assessing how stone tool technology evolved, how traditions of lithic production might have been culturally transmitted, and for defining the timing and scope of these evolutionary events. At present there is no null model to predict what morphological variation in the Oldowan should look like. Without such a model, quantifying whether Oldowan assemblages vary due to raw material constraints or whether they vary due to differences in production technique is not possible. This research establishes a null model for Oldowan lithic artifact morphological variation. To establish these expectations this research 1) models the expected range of variation through large scale reduction experiments, 2) develops an algorithm to categorize archaeological flakes based on how they are produced, and 3) statistically assesses the methods of production behavior used by Oldowan producing hominins at the site of DK from Olduvai Gorge, Tanzania via the experimental model. Results indicate that a subset of quartzite flakes deviate from the null expectations in a manner that demonstrates efficiency in flake manufacture, while some basalt flakes deviate from null expectations in a manner that demonstrates inefficiency in flake manufacture. The simultaneous presence of efficiency in stone tool production for one raw material (quartzite) and inefficiency in stone tool production for another raw material (basalt) suggests that Oldowan producing hominins at DK were able to mediate the economic costs associated with stone tool procurement by utilizing high-cost materials more efficiently than is expected and low-cost materials in an inefficient manner. [ABSTRACT FROM AUTHOR]