Search

Cyclohexylphenols are valuable intermediate chemicals applied in the manufacture of dyes, resins, and pharmaceutical drugs. However, they are synthesized using raw chemicals derived from fossil fuels rather than sustainable sources (e.g., lignin-derived phenol). In this article, we report a one-pot synthesis of cyclohexylphenols via phenol-assisted conversion with isopropyl alcohol over the tandem catalytic system formed by RANEY® Nickel plus hierarchical Beta zeolite. Over this tandem catalytic system, cyclohexylphenols were synthesized with remarkable selectivity (∼70%) at high conversion rates (64%) after 1 h of reaction at 150° C. In contrast, higher temperatures (175 °C) were required to obtain alkylphenols over the Al-SBA-15 catalyst, which is highly accessible thanks to its uniform mesoporous structure, albeit with weaker Lewis acid sites. Additionally, selectivity to cyclohexylphenols over Al-SBA-15 was far lower (19%) than over hierarchical Beta zeolite, and cresols were instead the most abundant alkylphenol (26%). Therefore, the combination of suitable accessibility and Brønsted acidity of hierarchical Beta with the hydrogenating ability of RANEY® Ni through catalytic hydrogen transfer from isopropyl alcohol drives the selectivity of this tandem system towards the production of cyclohexylphenols. [ABSTRACT FROM AUTHOR]

The dialkylation of 2,14-dithiacalix[4]arene was studied employing various synthetic procedures known for the parent macrocycles (thiacalixarenes and/or classical calixarenes). The best results for distal dialkylation were achieved using the Mitsunobu reaction with the corresponding alcohols. Interestingly, due to the lower symmetry of the starting compound, the dialkylated derivatives represent inherently chiral systems. The introduction of chiral substituents thus leads to mixtures of diastereomers potentially useful for the separation of individual stereoisomers as demonstrated by chiral HPLC. The conformational behavior of the novel compounds was studied both in solution (NMR) and in the solid state (X-ray). [ABSTRACT FROM AUTHOR]

The meta- and para-substituted aminocalix[4]arenes immobilized in the cone conformation were acylated to yield the corresponding acyl amides. Subsequent cyclization with aryl or alkyl cyanides afforded the expected quinazolines only in the case of the para-substituted series, while only complex reaction mixtures were obtained for the meta-substituted analogues. This finding was used as a strategy for the preparation of novel inherently chiral calixarenes with strong fluorescence. The structure of the products was proved by the combination of NMR and single crystal X-ray analyses. The dynamic NMR study of quinazoline derivatives revealed the existence of two different atropisomers in solution at lower temperatures. As evidenced by resolution with a chiral HPLC column and by the fluorescence titration experiments, novel quinazolines represent inherently chiral macrocycles of high potential for the design of chiral calixarene-based receptors. [ABSTRACT FROM AUTHOR]

Research activities and recent developments in the area of three-dimensional zeolites and their two-dimensional analogues are reviewed. Zeolites are the most important industrial heterogeneous catalysts with numerous applications. However, they suffer from limited pore sizes not allowing penetration of sterically demanding molecules to their channel systems and to active sites. We briefly highlight here the synthesis, properties and catalytic potential of three-dimensional zeolites followed by a discussion of hierarchical zeolites combining micro- and mesoporosity. The final part is devoted to two-dimensional analogues developed recently. Novel bottom-up and top-down synthetic approaches for two-dimensional zeolites, their properties, and catalytic performances are thoroughly discussed in this review. [ABSTRACT FROM AUTHOR]

The advanced investigation of pore networks in isoreticular zeolites and mesoporous materials related to the IPC family was performed using high-resolution argon adsorption experiments coupled with the development of a state-of-the-art non-local density functional theory approach. The optimization of a kernel for model sorption isotherms for materials possessing the same layer structure, differing only in the interlayer connectivity (e.g. oxygen bridges, single- or double-four-ring building units, mesoscale pillars etc.) revealed remarkable differences in their porous systems. Using high-resolution adsorption data, the bimodal pore size distribution consistent with crystallographic data for IPC-6, IPC-7 and UTL samples is shown for the first time. A dynamic assessment by positron annihilation lifetime spectroscopy (PALS) provided complementary insights, simply distinguishing the enhanced accessibility of the pore network in samples incorporating mesoscale pillars and revealing the presence of a certain fraction of micropores undetected by gas sorption. Nonetheless, subtle differences in the pore size could not be discriminated based on the widely-applied Tao–Eldrup model. The combination of both methods can be useful for the advanced characterization of microporous, mesoporous and hierarchical materials. [ABSTRACT FROM AUTHOR]

The ability of the antispasmodic agent trospium chloride (TCl) to form solvates was investigated by applying conventional solvate screening methods on 20 solvents. According to the solubility of TCl, different approaches were considered (slow evaporation, slurrying and anti-solvent addition). Five solvates, with the solvents methanol, acetonitrile, propionitrile, N,N-dimethylformamide, nitromethane and dihydrate, were identified and characterized by various analytical techniques. Moreover, a solvate with isopropyl alcohol and TCl sesquihydrate was prepared circumstantially outside the systematic screening. The structures of all the solvates were determined by single crystal X-ray diffraction. The reproducible forms were further characterized by powder X-ray diffraction and desolvation behaviour was observed by thermoanalytical (TGA/DSC) methods. Structural features of novel solvates and of previously described polymorphs and cocrystals of TCl were compared, presented by a tree diagram which classifies the structures according to their molecular packing. [ABSTRACT FROM AUTHOR]

The inter-layer interactions and the possible arrangements of MWW-type layers were investigated computationally at the non-local density functional theory level. Powder XRD patterns were simulated for structures obtained computationally and compared with experimental data. The MCM-22P material corresponds to the layers bound with relatively strong hydrogen bonds between surface silanol groups that is an energetically preferred structure in the presence of a structure directing agent (hexamethyleneimine). The powder XRD pattern of MCM-56 is best matched for relatively disordered (in the ab plane) MWW layers that are partially condensed. The appearance of the powder XRD pattern in the 2 range of 7.5-10° depends on the extent of interlayer condensation. The combination of density functional investigation of interactions between MWW layers together with simulation of powder XRD patterns brings atomistic insight into the inter-layer arrangement and better understanding of the effects responsible for the differences between various layered materials of the MWW family. [ABSTRACT FROM AUTHOR]

Nucleophilic fluorination of secondary aliphatic substrates, especially of halides, still remains a challenge. Among the available reagents, TBAT belongs to one of the best choices due to its stability, affordable price and low toxicity. With the aim to improve its selectivity, we synthesized three analogues modified in the aryl part of the TBAT reagent with one or two electron donating methoxy groups or with one electron withdrawing trifluoromethyl group. All three reagents are air-stable compounds and their structure was confirmed by a single crystal X-ray analysis. In testing the reactivity and selectivity of the reagents with a library of secondary bromides, as well as of other selected primary and secondary substrates, we found that substitution with methoxy groups mostly improves both reactivity and selectivity compared to TBAT, while the substitution with trifluoromethyl group leads to inferior results. Difluorosilicates modified by more than two electron donating methoxy groups proved to be unstable and decomposed spontaneously to the HF 2 - anion. DFT calculations of tetramethylammonium analogues of the studied reagents disclosed that the substitution of the phenyl group with the methoxy substituent lowers the transitions state energy of the decomposition to a fluorosilane-fluoride complex, while the substitution with the trifluoromethyl group has an opposite effect., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

A starting thiacalix[4]arene can be easily transformed into oxidized phenoxathiin-based macrocycles 9 and 9', representing an unusual structural motif in calixarene chemistry. The presence of electron-withdrawing groups (SO 2 , SO) and the considerable internal strain caused by the condensed heterocyclic moiety render these molecules susceptible to nucleophilic attack. The reaction with various organolithium reagents provides a number of different products resulting from the cleavage of either the calixarene skeleton or the phenoxathiin group or both ways simultaneously. This enables the preparation of thiacalixarene analogues with unusual structural features, including systems containing a biphenyl fragment as a part of the macrocyclic skeleton. The above-described transformations, unparalleled in classical calixarene chemistry, clearly demonstrate the synthetic potential of this thiacalixarene subgroup., Competing Interests: There are no conflicts of interest to declare., (This journal is © The Royal Society of Chemistry.)

TBAT (tetrabutylammonium difluorotriphenylsilicate) is an excellent homogeneous nucleophilic fluorination reagent, but a high excess of the reagent was reported to be essential. We hence optimized the reaction conditions and compared its nucleophilic fluorination reactivity with that of other common commercial nucleophilic fluorination reagents, such as anhydrous TBAF and TASF (tris(dimethylamino)sulfonium difluorotrimethylsilicate). As the substrates, we employed a standard set of primary and secondary octyl substrates under identical conditions. To eliminate the possibility of hydrogen fluoride elimination in the above reagents, we prepared four quaternary ammonium fluorides lacking β-elimination possibility in the hydrocarbon chain, transformed them to the corresponding difluorotriphenylsilicates, and compared their reactivity with that of the commercial reagents. Furthermore, attempts to isolate analogous tetrabutylammonium difluoromethyldiphenylsilicate or difluorodimethylphenylsilicate failed, as was confirmed by comparison of the published experimental data with computed 19 F NMR spectra. Finally, we studied the transition states of decomposition of various tetramethylammonium methylphenyldifluorosilicates by DFT methods and found that their relative energies increase with an increasing number of phenyl groups. The formation of difluorosilicates is a nearly barrierless process.

Oxidized phenoxathiin-based macrocycles, easily accessible thiacalix[4]arene derivatives, consist of a unique set of structural elements representing a key prerequisite for the unexpected reactivity described in this paper. As proposed, the internal strain, imposed by the presence of a heterocyclic moiety, together with a number of electron-withdrawing groups (SO 2 ) opens the way to the cleavage of the macrocyclic skeleton through a cascade of three S N Ar reactions triggered by the nucleophilic attack of an SH - anion. The whole transformation, which is unparalleled in classical calixarene chemistry, leads to unique linear sulfinic acid derivatives with a rearranged phenoxathiin moiety that can serve as building blocks for macrocyclic systems of a new type.

The assembly-disassembly-organisation-reassembly (ADOR) process has led to the discovery of numerous zeolite structures, albeit limited to materials with decreased pore size in relation to the parent germanosilicate zeolite. This limitation stems from the rapid decrease in d -spacing upon hydrolysis (disassembly). Nevertheless, we have artificially increased the d -spacing of layered IPC-1P by intercalating organic species. Furthermore, we have reconstructed double four rings (D4R) between layers, thus transforming IPC-1P back into the parent UTL zeolite. This reconstruction has provided not only germanosilicate but also a new, high-silica UTL zeolite (Si/Ge = 481). Therefore, our "reverse ADOR" opens up new synthetic routes towards promising extra-large-pore zeolite-based materials with new chemical compositions., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

The determination of the full crystal structure of the uranyl sulfate mineral uranopilite, (UO 2 ) 6 (SO 4 )O 2 (OH) 6 ·14H 2 O, including the positions of the hydrogen atoms within the corresponding unit cell, has not been feasible to date due to the poor quality of its X-ray diffraction pattern. In this paper, the complete crystal structure of uranopilite is established for the first time by means of first principles solid-state calculations based in density functional theory employing a large plane wave basis set and pseudopotential functions. The computed unit-cell parameters and structural data for the non-hydrogen atoms are in excellent agreement with the available experimental data. The computed X-ray diffraction pattern is also in satisfactory agreement with the experimental pattern. The infrared spectrum of uranopilite is collected from a natural crystal specimen originating in Jáchymov (Czech Republic) and computed employing density functional perturbation theory. The theoretical and experimental vibrational spectra are highly consistent. Therefore, a full assignment of the bands in the experimental infrared spectrum is performed using a normal mode analysis of the first principles vibrational results. One overtone and six combination bands are recognized in the infrared spectrum. The elasticity tensor and phonon spectra of uranopilite are computed from the optimized crystal structure and used to analyze its mechanical stability, to obtain a rich set of elastic properties and to derive its fundamental thermodynamic properties as a function of temperature. Uranopilite is shown to have a large mechanical anisotropy and to exhibit the negative Poisson's ratio and negative linear compressibility phenomena. The calculated specific heat and entropy at 298.15 K are 179.6 and 209.0 J K -1 mol -1 , respectively. The computed fundamental thermodynamic functions of uranopilite are employed to obtain its thermodynamic functions of formation in terms of the elements and the thermodynamic properties of a set of chemical reactions relating uranopilite with a representative group of secondary phases of spent nuclear fuel. From the reaction thermodynamic data, the relative stability of uranopilite with respect to these secondary phases is evaluated as a function of temperature and under different hydrogen peroxide concentrations. From the results, it follows that uranopilite has a very large thermodynamic stability in the presence of hydrogen peroxide. The high stability of uranopilite under this condition justify its early crystallization in the paragenetic sequence of secondary phases occurring when uranium dioxide is exposed to sulfur-rich solutions., Competing Interests: There are no conflicts of interest to declare., (This journal is © The Royal Society of Chemistry.)

We report the hydrothermal synthesis and characterization of two uranyl-oxide hydroxy-hydrate compounds with Pr(iii) (U-Pr) and Tb(iii) (U-Tb) ions prepared via direct hydrothermal reactions of lanthanide (Ln = Pr or Tb) ions with a uranyl-oxide hydroxy-hydrate phase, schoepite. Both compounds U-Pr and U-Tb show thin plate morphologies with atomic ratios of 2 (U : Pr) and 6 (U : Tb) and have been characterized by multiple techniques. The layered structures with interlayer hydrated Pr(iii) or Tb(iii) ions formed via uranyl-Pr/Tb interactions have been confirmed by synchrotron single crystal X-ray diffraction studies. In addition, the evolution of the uranyl oxide hydroxide layers and anion topologies upon increasing the concentration of interlayer cations by using different U : Ln (Ln = Pr or Tb) ratios has been discussed. The success in the preparation and characterization of compounds U-Pr and U-Tb with different U : Ln (Ln = Pr or Tb) ratios highlights the flexibility of the uranyl oxide hydroxide layers with respect to the incorporation of interlayer cations via a gradual hydroxyl to oxo transition. The study has direct implications in regard to the natural weathering of uraninite mineral and the alteration of spent nuclear fuels during the long-term geological disposal.

The full crystal structure of the copper-uranyl tetrahydroxide mineral (vandenbrandeite), including the positions of the hydrogen atoms, is established by the first time from X-ray diffraction data taken from a natural crystal sample from the Musonoi Mine, Katanga Province, Democratic Republic of Congo. The structure is verified using first-principles solid-state methods. From the optimized structure, the mechanical and dynamical stability of vandenbrandeite is studied and a rich set of mechanical properties are determined. The Raman spectrum is recorded from the natural sample and determined theoretically. Since both spectra have a high-degree of consistence, all spectral bands are rigorously assigned using a theoretical normal-coordinate analysis. Two bands in the Raman spectra, located at 2327 and 1604 cm -1 , are recognized as overtones and a band at 1554 cm -1 is identified as a combination band. The fundamental thermodynamic functions of vandenbrandeite are computed as a function of temperature using phonon calculations. These properties, unknown so far, are key-parameters for the performance-assessment of geological repositories for storage of radioactive nuclear waste and for understanding the paragenetic sequence of minerals arising from the corrosion of uranium deposits. The thermodynamic functions are used here to determine the thermodynamic properties of formation of vandenbrandeite in terms of the elements and the Gibbs free-energies and reaction constants for a series of reactions involving vandenbrandeite and a representative subset of the most important secondary phases of spent nuclear fuel. Finally, from the thermodynamic data of these reactions, the relative stability of vandenbrandeite with respect to these phases as a function of temperature and in the presence of hydrogen peroxide is evaluated. Vandenbrandeite is shown to be highly stable under the simultaneous presence of water and hydrogen peroxide., Competing Interests: There are no conflicts of interest to declare., (This journal is © The Royal Society of Chemistry.)

The crystal structure, hydrogen bonding, mechanical properties and Raman spectrum of the lead uranyl silicate monohydrate mineral kasolite, Pb(UO 2 )(SiO 4 )·H 2 O, are investigated by means of first-principles solid-state methods based on density functional theory using plane waves and pseudopotentials. The computed unit cell parameters, bond lengths and angles and X-ray powder pattern of kasolite are found to be in very good agreement with their experimental counterparts. The calculated hydrogen atom positions and associated hydrogen bond structure in the unit cell of kasolite confirmed the hydrogen bond scheme previously determined from X-ray diffraction data. The kasolite crystal structure is formed from uranyl silicate layers having the uranophane sheet anion-topology. The lead ions and water molecules are located in the interlayer space. Water molecules belong to the coordination structure of lead interlayer ions and reinforce the structure by hydrogen bonding between the uranyl silicate sheets. The hydrogen bonding in kasolite is strong and dual, that is, the water molecules are distributed in pairs, held together by two symmetrically related hydrogen bonds, one being directed from the first water molecule to the second one and the other from the second water molecule to the first one. As a result of the full structure determination of kasolite, the determination of its mechanical properties and Raman spectrum becomes possible using theoretical methods. The mechanical properties and mechanical stability of the structure of kasolite are studied using the finite deformation technique. The bulk modulus and its pressure derivatives, the Young and shear moduli, the Poisson ratio and the ductility, hardness and anisotropy indices are reported. Kasolite is a hard and brittle mineral possessing a large bulk modulus of the order of B ∼ 71 GPa. The structure is mechanically stable and very isotropic. The large mechanical isotropy of the structure is unexpected since layered structures are commonly very anisotropic and results from the strong dual hydrogen bonding among the uranyl silicate sheets. The experimental Raman spectrum of kasolite is recorded from a natural mineral sample from the Jánská vein, Příbram base metal ore district, Czech Republic, and determined by using density functional perturbation theory. The agreement is excellent and, therefore, the theoretical calculations are employed to assign the experimental spectrum. Besides, the theoretical results are used to guide the resolution into single components of the bands from the experimental spectrum. A large number of kasolite Raman bands are reassigned. Three bands of the experimental spectrum located at the wavenumbers 1015, 977 and 813 cm -1 , are identified as combination bands., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

The generation of solid salts of organic molecules is important to the chemical and pharmaceutical industry. Commonly used salt screening methods consume a lot of resources. We employed a combination of ion exchange screening and vapour diffusion for crystallization. This technique is semi-automatic and requires just nanoliters of the solution of the analyte to be crystallized. This high throughput screening yielded single crystals of sufficient size and quality for single-crystal X-ray structure determination using an in-house X-ray diffractometer. The broad scope of our method has been shown by challenging it with 7 very different organic cations, whose aqueous solubilities vary by a factor of almost 1000. At least one crystal structure for 6 out of 7 tested cations was determined; 4 out of the successful 6 ones had never been crystallized before. Our method is extremely attractive for high throughput salt screening, especially for active pharmaceutical ingredients (APIs), as about 40% of all APIs are cationic salts. Additionally, our screening is a new and very promising procedure for the crystallization of salts of organic cations.

IPC-12 zeolite is the first member of the ADOR family produced by the structural transformation of UOV. The details of the UOV rearrangement were studied to determine the influence of the properties of the parent zeolite and treatment conditions on the outcome of IPC-12 formation. It was established that incomplete disassembly of UOV can be caused by insufficient lability of interlayer connectivity in the parent material possessing Si-enriched D4Rs or by inhibition of hydrolysis by diluted acid at high temperature. The impacts of specific interactions of the framework with anions on controllable breaking of interlayer connectivity and the conditions of the treatment at low pH (<-1) on the characteristics of the produced IPC-12 were found to be negligible. The concentration of the acid significantly influences the extent and even the direction of UOV transformation. Layer disassembly is inhibited in 1-4 M acid solutions, and complete hydrolysis to a layered precursor can be achieved in 0.1 M solution, while application of 12 M solution led to direct formation of IPC-12. Layer reassembly followed using in situ XRD measurement with a synchrotron source was found to be a gradual process starting at 40 °C and completing at 200-220 °C.

Layered zeolite materials with FER layer topology can produce various condensed and expanded structures including zeolite frameworks, FER and CDO, their interlayer expanded forms (IEZ), and organic-intercalated and pillared derivatives. This work concerns pillaring of the surfactant-swollen derivative with a gallery height of ca. 2.5 nm between layers by treatment with tetraethylorthosilicate (TEOS) at room and elevated temperatures. The materials obtained at 100 °C and higher showed unusual properties including 2 nm pores on the micro/mesoporous border and disordered layer packing indicated by the absence of distinct low angle interlayer peaks at d-spacing >3 nm (∼3° 2θ Cu Kα radiation) in the X-ray diffraction pattern (XRD). TEOS treatment at room temperature produced a pillared molecular sieve with the expected mesoporous characteristics, namely a pore size of around 3 nm and a high intensity low angle (001) peak at 2.3° 2θ, and a d-spacing of 3.8 nm, in the XRD. The characterization aiming to elucidate the nature of the obtained unusual products included gas adsorption isotherms, aberration corrected (C s -corrected) Scanning Transmission Electron Microscopy (STEM) studies and 29 Si solid state NMR. BET surface area values decreased with the temperature of TEOS treatment from approximately 1200 m 2 g -1 to ∼900 and 600 m 2 g -1 , at room temperature, 100 °C, and 120 °C, respectively. The 29 Si solid state NMR revealed the presence of both Q 3 ((SiO) 3 SiOX, X = H or minus charge) and Q 4 ((SiO) 4 Si) centers giving separated signals up to the pillaring step. After pillaring at 100 °C and calcination, the nominal intensity ratios Q 4  : Q 3 were 2.17 and 2.61 but the signals were merged into one broad peak indicating the structural heterogeneity of Si-O coordination. The microscopy showed the presence of FER layers in the samples but the overall structure and composition were not well-defined. The observed unusual disorganization and possible partial degradation of layers during pillaring may result from the combination of high temperature, alkalinity (surfactant hydroxide) and siliceous composition of the layers. The obtained pillared products are of interest for the preparation of larger pore catalysts and sorbents or controlled drug delivery.

The disordered intermediate of the ADORable zeolite UTL has been structurally confirmed using the pair distribution function (PDF) technique. The intermediate, IPC-1P, is a disordered layered compound formed by the hydrolysis of UTL in 0.1 M hydrochloric acid solution. Its structure is unsolvable by traditional X-ray diffraction techniques. The PDF technique was first benchmarked against high-quality synchrotron Rietveld refinements of IPC-2 (OKO) and IPC-4 (PCR) - two end products of IPC-1P condensation that share very similar structural features. An IPC-1P starting model derived from density functional theory was used for the PDF refinement, which yielded a final fit of Rw = 18% and a geometrically reasonable structure. This confirms the layers do stay intact throughout the ADOR process and shows PDF is a viable technique for layered zeolite structure determination.

The tris-Tröger's bases (TBs) are electron-rich fluorescent concave receptors due to the incorporation of naphthalene or triphenylene moieties (calix-1 and calix-2). The structures of the TBs were studied using SXRD to reveal the propensity to bind nitroaromatics. Titration with explosive-related nitro-compounds suggests that the TBs may be used for sensing explosives.

The catalytic activity and the adsorption properties of zeolites depend on their topology and composition. For a better understanding of the structure-activity relationship it is advantageous to focus just on one of these parameters. Zeolites synthesized recently by the ADOR protocol offer a new possibility to investigate the effect of the channel diameter on the adsorption and catalytic properties of zeolites: UTL, OKO, and PCR zeolites consist of the same dense 2D layers (IPC-1P) that are connected with different linkers (D4R, S4R, O-atom, respectively) resulting in the channel systems of different sizes (14R × 12R, 12R × 10R, 10R × 8R, respectively). Consequently, extra-framework cation sites compensating charge of framework Al located in these dense 2D layers (channel-wall sites) are the same in all three zeolites. Therefore, the effect of the zeolite channel size on the Lewis properties of the cationic sites can be investigated independent of other factors determining the quality of Lewis sites. UTL, OKO, and PCR and pillared 2D IPC-1PI materials were prepared in Li-form and their properties were studied by a combination of experimental and theoretical methods. Qualitatively different conclusions are drawn for Li(+) located at the channel-wall sites and at the intersection sites (Li(+) located at the intersection of two zeolite channels): the Lewis acid strength of Li(+) at intersection sites is larger than that at channel-wall sites. The Lewis acid strength of Li(+) at channel-wall sites increases with decreasing channel size. When intersecting channels are small (10R × 8R in PCR) the intersection Li(+) sites are no longer stable and Li(+) is preferentially located at the channel-wall sites. Last but not least, the increase in adsorption heats with the decreasing channel size (due to enlarged dispersion contribution) is clearly demonstrated.

Porous organic-inorganic materials with tunable textural characteristics were synthesized using the top-down process by intercalating silsesquioxanes and polyhedral oligomeric siloxanes of different types between crystalline zeolite-derived layers. The influence of key parameters such as (i) linker nature (pure hydrocarbon, S-, N-containing); (ii) chain length in alkyl- and aryl bis(trialkoxysilyl) derivatives; (iii) denticity of the organic precursor molecules; (iv) nature and size of side chain in mono(trialkoxysilyl) substrates; (v) rigidity of the chain (saturated vs. unsaturated, aliphatic vs. aromatic); (vi) nature and size of leaving group on the structural and textural properties of formed hybrids was carefully addressed. It was established, that the optimal silsesquioxane appropriate for the formation of zeolite-derived hybrids with high textural characteristics should possess short alkyl or long aryl chains, relatively small leaving groups and denticity larger than 3. Addition of polydentate low-molecular binder improved the structural and textural characteristics of hybrids, especially when using bulky or hydrophilic linkers.

A solvothermal reaction of Zn(ii) salt with methanetetrabenzoic acid (H4MTB) and 1,4,8,11-tetraazacyclotetradecane (cyclam, CYC) created a new microporous metal-organic framework {[Zn2(μ4-MTB)(κ(4)-CYC)2]·2DMF·7H2O}n (DMF = N,N'-dimethylformamide). Single crystal X-ray diffraction showed that the complex exhibits a four-fold interpenetrated diamond-like structure topology with 1D jar-like channels with sizes about 14.1 × 14.1 and 2.4 × 2.4 Å(2). The stability of the framework and activation conditions of the compound have been studied by high-energy powder X-ray diffraction during in situ heating, thermogravimetric analysis coupled with mass spectrometry and infrared spectroscopy performed at different temperatures. The gas adsorption behaviour of {[Zn2(μ4-MTB)(κ(4)-CYC)2]·2DMF·7H2O}n was studied by adsorption of Ar, N2, CO2 and H2. Nitrogen and argon adsorption showed that the activated sample exhibits Brunauer-Emmet-Teller (BET) specific surface areas of 644 m(2) g(-1) (N2) and 562 m(2) g(-1) (Ar). The complex adsorbs carbon dioxide with a maximum storage capacity of 10.5 wt% at 273 K and 101 kPa. The observed hydrogen uptake was 1.27 wt% at 77 K and 800 Torr, which is the highest value reported for the compounds containing a MTB(4-) linker. The adsorption heats of carbon dioxide and hydrogen, calculated according to the Clausius-Clapeyron equation, were in the range 22.8-22.4 kJ mol(-1) for CO2 and 8.9-3.2 kJ mol(-1) for H2, indicating weak interactions of the gases with the framework.

The influence of swelling (i.e. the size of tetraalkylammonium surfactant molecule, the presence of tetrapropylammonium hydroxide (TPAOH), pH) and pillaring (i.e. the ratio between the swollen precursor IPC-1P and tetraethyl orthosilicate) conditions on the structure and textural properties of the resulting materials was studied in detail for IPC-1P, which is the layered precursor of zeolite PCR. The swelling of IPC-1P proceeds efficiently under basic conditions both in mixed C(n)H(2n+1)N(CH3)3Cl/TPAOH systems and in C(n)H(2n+1)N(CH3)3OH (n = 8, 10, 12, 14, 16, 18) solutions at pH = 13-14. The intercalation of C(n)H(2n+1)N(+)(CH3)3 in IPC-1P resulted in the formation of expanded materials with interlayer distances growing with increasing length of the alkyl chain in C(n)H(2n+1)N(CH3)3(+): 1.59-1.86 (n = 8) < 1.89-2.11 (10) < 2.05-2.26 (12) = 2.08-2.26 (14) < 2.37-2.43 (16) < 2.57-2.71 (18) Å. IPC-2 zeolite was formed during calcination of IPC-1P samples swollen in C(n)H(2n+1)N(CH3)3OH solution, while PCR zeolite can be obtained by calcination of IPC-1P treated with either C(n)H(2n+1)N(CH3)3Cl/TPAOH or C(n)H(2n+1)N(CH3)3Cl. The pillaring of IPC-1P samples swollen with C(n)H(2n+1)N(CH3)3OH provided mesoporous materials with narrow pore size distribution in the range 2.5-3.5 nm. Pillared materials derived from the samples swollen in the presence of TPAOH were characterized by a broader pore size distribution. The optimal TEOS/IPC-1PSW ratio being sufficient for the formation of well-ordered pillared derivatives characterized by improved textural properties (S(BET) = 878 m(2) g(-1), V(total) = 0.599 cm(3) g(-1)) was found to be 1 : 1.5.

The unilamellar form of zeolite MWW, MCM-56, which is obtained by direct hydrothermal synthesis has been studied with regard to acidity and porosity in its original and post-synthesis modified pillared and delaminated forms. The acidity measured by FTIR was found to be only slightly lower than the highly active 3-D MWW forms, MCM-22 and MCM-49. Pivalonitrile adsorption, which is a measure of spatial openness, showed 50% accessibility vs. <30% for MCM-22/49. It highlights the potential of MCM-56 as a layered material with increased access to acid sites because it does not entail laborious post-synthesis modification. Swelling, pillaring and delamination of MCM-56 are facile but result in a reduction in the number of Brønsted acid sites (BAS) while increasing accessibility to pivalonitrile. The delamination procedure involving sonication and acidification of the highly basic mother liquor produces the most visible increase in surface area and access to all BAS. The accompanying doubling of the solid yield and the decrease in absolute number of BAS suggest significant precipitation of dissolved silica generated during swelling and sonication in high pH medium. The viability of separating surfactant covered layers upon sonication with the consequence of exposing hydrophobic hydrocarbon tails to aqueous environment is addressed.

The inter-layer interactions and the possible arrangements of MWW-type layers were investigated computationally at the non-local density functional theory level. Powder XRD patterns were simulated for structures obtained computationally and compared with experimental data. The MCM-22P material corresponds to the layers bound with relatively strong hydrogen bonds between surface silanol groups that is an energetically preferred structure in the presence of a structure directing agent (hexamethyleneimine). The powder XRD pattern of MCM-56 is best matched for relatively disordered (in the ab plane) MWW layers that are partially condensed. The appearance of the powder XRD pattern in the 2θ range of 7.5-10° depends on the extent of interlayer condensation. The combination of density functional investigation of interactions between MWW layers together with simulation of powder XRD patterns brings atomistic insight into the inter-layer arrangement and better understanding of the effects responsible for the differences between various layered materials of the MWW family.

The action of a tetrapropylammonium hydroxide solution on lamellar zeolite precursor MCM-22P produced a stable aqueous colloidal suspension which was shown by X-ray diffraction, small angle X-ray scattering and atomic force microscopy to contain ultrathin two-dimensional (2D) crystallites, including one-unit cell thick (i.e., 2.5 nm) monolayers.

A general method for Cu-catalyzed C-H sulfenylation of purines, 7-deaza- and 9-deazapurines with aryl- or alkyldisulfides has been developed. In purines, the reaction occurs at position 8, in 7-deazapurines at position 7 and in 9-deazapurines at position 9, leading to new interesting arylsulfanyl derivatives of purine or deazapurine bases. The resulting 8-arylsulfanylpurines undergo Liebesking-Srogl coupling with arylstannanes or boronic acids, whereas the (arylsulfanyl)deazapurines are not reactive under these conditions.

Friedländer condensation between 2-aminoaryl ketones and different carbonyl compounds, catalyzed by CuBTC was investigated by a combination of various experimental techniques and by density functional theory based modelling. CuBTC exhibiting hard Lewis acid character showed highly improved catalytic activity when compared with other molecular sieves showing high concentraion of Lewis acid sites, e.g. in BEA and (Al)SBA-15. Polysubstituted quinolines were synthesized via a Friedländer reaction catalyzed by CuBTC under the solvent-free conditions. High concentration of active sites in CuBTC together with the concerted effect of a pair of adjacent Cu(2+) coordinatively unsaturated active sites are behind a very high quinoline yield reached within a short reaction time. Results reported here make CuBTC a promising catalyst for other Lewis acid-promoted condensations, including those leading to biologically active compounds with a particular relevance for the pharmaceutical industry. The mechanism of a catalyzed Friedländer reaction investigated computationally is also reported.

Proper combination of template and optimized reaction conditions provides zeolite FER with homogeneous distribution of Al in the framework; this results in a new zeolite adsorbent exhibiting a constant heat of CO(2) adsorption.

Siliceous SBA-15 mesoporous molecular sieves were functionalized with different amounts of 3-aminopropyl-trimethoxysilane. To obtain a more detailed insight into the material properties of the prepared samples, their textural parameters were combined with results of thermal analysis. Adsorption isotherms of carbon dioxide on parent and functionalized SBA-15 were measured in the temperature range from 273 to 333 K. From the temperature dependence of CO(2) isotherms the isosteric adsorption heats of CO(2) were determined and discussed. Information about the surface energetic heterogeneity caused by tethered 3-aminopropyl groups were obtained from CO(2) adsorption energy distributions calculated using the theoretical CO(2) adsorption isotherms derived from the non-local density functional theory. The values of isosteric heats and the energy distributions of CO(2) adsorption detect highly energetic sites and enabled quantification of their concentrations., (This journal is © the Owner Societies 2011)

Mesoporous aluminosilicate adsorbents for carbon dioxide were prepared by the grafting of aluminium into SBA-15 silica using an aqueous solution of aluminium chlorohydrate. As the ion exchange sites are primarily associated with the presence of tetrahedrally coordinated aluminium, extra-framework aluminium on the SBA-15 surface was inserted into the silica matrix by a treatment with an aqueous solution of NH(4)OH. Synthesized mesoporous aluminosilicate preserving all the characteristic features of a mesoporous molecular sieve was finally modified by the alkali metal cation exchange. To examine carbon dioxide adsorption on prepared materials, adsorption isotherms in the temperature range from 0 °C to 60 °C were measured. Based on the known temperature dependence of adsorption isotherms, isosteric adsorption heats giving information on the surface energetics of CO(2) adsorption were calculated and discussed. The comparison of carbon dioxide isotherms obtained on aluminosilicate SBA-15, aluminosilicate SBA-15 containing cations Na(+) and K(+) and activated alumina F-200 reveals that the doping with sodium or potassium cations dramatically enhances adsorption in the region of equilibrium pressures lower than 10 kPa. Therefore, synthesized aluminosilicate adsorbents doped with Na(+) or K(+) cations are suitable for carbon dioxide separation from dilute gas mixtures., (This journal is © the Owner Societies 2010)