Search

The vast majority of droplet-based microfluidic devices are made from polydimethylsiloxane (PDMS). Unfortunately PDMS is not suitable for high frequency droplet generation at high operating pressure due to its low shear modulus. In this paper, we report the fabrication and testing of microfluidic devices using thermoset polyester (TPE). The optical characteristics of the fabricated devices were assessed and substrate resistance to pressure also investigated. TPE devices bonded using an O2plasma treated PET substrate at 76 °C were shown to function efficiently at pressures up to 18 MPa. TPE material retains many of the attractive features of PDMS such as ease of fabrication but significantly, has superior mechanical properties. The improved resistance of TPE to high pressures enabled investigation of high frequency droplet generation as a function of a wide range of flow-rates with three different oils as continuous phase. [ABSTRACT FROM AUTHOR]

We have developed a generic platform to undertake the analysis of protein copy number from single cells. The approach described here is ‘all-optical’ whereby single cells are manipulated into separate analysis chambers using an optical trap; single cells are lysed by a shock wave caused by laser-induced microcavitation, and the protein released from a single cell is measured by total internal reflection microscopy as it is bound to micro-printed antibody spots within the device. The platform was tested using GFP transfected cells and the relative precision of the measurement method was determined to be 88%. Single cell measurements were also made on a breast cancer cell line to measure the relative levels of unlabelled human tumour suppressor protein p53 using a chip incorporating an antibody sandwich assay format. These results suggest that this is a viable method for measuring relative protein levels in single cells. [ABSTRACT FROM AUTHOR]

We describe a simple technique for fabricating non-emissive colour filters based on the sensitisation of a highly porous nanostructured metal-oxide film with a monolayer of dye molecules. Ultrafast electron transfer at the oxide/dye interface induces efficient quenching of photogenerated excitons in the dye, reducing the photoluminescence quantum yield by many orders of magnitude. The resultant filters exhibit much less autofluorescence than conventional colour filters (where the chromophore is dispersed in a glass or polymer host), and are a viable low cost alternative to interference filters for microfluidic devices and other applications requiring non-emissive filtering. [ABSTRACT FROM AUTHOR]

We describe the design, fabrication and use of a single-layered poly(dimethylsiloxane) microfluidic structure for the entrapment and release of microdroplets in an array format controlled entirely by liquid flow. Aqueous picoliter droplets are trapped en masse and optically monitored for extended periods of time. Such an array-based approach is used to characterize droplet shrinkage, aggregation of encapsulated E. colicells and enzymatic reactions. We also demonstrate that trapped droplets may be recovered from the microfluidic array for further processing. [ABSTRACT FROM AUTHOR]

A novel method is presented for controllably merging aqueous microdroplets within segmented flow microfluidic devices. Our approach involves exploiting the difference in hydrodynamic resistance of the continuous phase and the surface tension of the discrete phase through the use of passive structures contained within a microfluidic channel. Rows of pillars separated by distances smaller than the representative droplet dimension are installed within the fluidic network and define passive merging elements or chambers. Initial experiments demonstrate that such a merging element can controllably adjust the distance between adjacent droplets. In a typical scenario, a droplet will enter the chamber, slow down and stop. It will wait and then merge with the succeeding droplets until the surface tension is overwhelmed by the hydraulic pressure. We show that such a merging process is independent of the inter-droplet separation but rather dependent on the droplet size. Moreover, the number of droplets that can be merged at any time is also dependent on the mass flow rate and volume ratio between the droplets and the merging chamber. Finally, we note that the merging of droplet interfaces occurs within both compressing and the decompressing regimes. [ABSTRACT FROM AUTHOR]

The exploitation of microdroplets produced within microfluidic environments has recently emerged as a new and exciting technological platform for applications within the chemical and biological sciences. Interest in microfluidic systems has been stimulated by a range of fundamental features that accompany system miniaturization. Such features include the ability to process and handle small volumes of fluid, improved analytical performance when compared to macroscale analogues, reduced instrumental footprints, low unit cost, facile integration of functional components and the exploitation of atypical fluid dynamics to control molecules in both time and space. Moreover, microfluidic systems that generate and utilize a stream of sub-nanolitre droplets dispersed within an immiscible continuous phase have the added advantage of allowing ultra-high throughput experimentation and being able to mimic conditions similar to that of a single cell (in terms of volume, pH, and salt concentration) thereby compartmentalizing biological and chemical reactions. This review provides an overview of methods for generating, controlling and manipulating droplets. Furthermore, we discuss key fields of use in which such systems may make a significant impact, with particular emphasis on novel applications in the biological and physical sciences. [ABSTRACT FROM AUTHOR]

A droplet-based microfluidic system combined with high-sensitivity optical detection is used as a tool for high-throughput confinement and detection of single DNA molecules. [ABSTRACT FROM AUTHOR]

The synthesis of one-dimensional titanium oxide nanostructures has been accelerated by performing the reaction in a microfluidic environment as opposed to a classical batch process. [ABSTRACT FROM AUTHOR]