Search

We synthesized Fe3O4nanoparticle/reduced graphene oxide (RGO-Fe3O4) nanocomposites and evaluated their performance as anodes in both half and full coin cells. The nanocomposites were synthesized through a chemical co-precipitation of Fe2橷 Fe3 the presence of graphene oxides within an alkaline solution and a subsequent high-temperature reduction reaction in argon (Ar) environment. The morphology and microstructures of the fabricated RGO-Fe3O4nanocomposites were characterized using various techniques. The results indicated that the Fe3O4nanoparticles had relatively homogeneous dispersions on the RGO sheet surfaces. These as-synthesized RGO-Fe3O4nanocomposites were used as anodes for both half and full lithium-ion cells. Electrochemical measurement results exhibit a high reversible capacity which is about two and a half times higher than that of graphite-based anodes at a 0.05C rate, and an enhanced reversible capacity of about 200 mAh g−1even at a high charge/discharge rate of 10C (9260 mA g−1) in half cells. Most important of all, these fabricated novel nanostructures also show exceptional capacity retention with the assembled RGO-Fe3O4/LiNi1/3Mn1/3Co1/3O2full cell at different C rates. This outstanding electrochemical behavior can be attributed to the unique microstructure, morphology, texture, surface properties of the nanocomposites, and combinative effects from the different chemical composition in the nanocomposites. [ABSTRACT FROM AUTHOR]

SnS2 nanoparticle-loaded graphene nanocomposites were synthesized via one-step hydrothermal reaction. Their electrochemical performance was evaluated as the anode for rechargeable lithium-ion batteries after thermal treatment in an Ar environment. The electrochemical testing results show a high reversible capacity of more than 800 mA h g(-1) at 0.1 C rate and 200 mA h g(-1) for up to 5 C rate. The cells also exhibit excellent capacity retention for up to 90 cycles even at a high rate of 2 C. This electrochemical behavior can be attributed to the well-defined morphology and nanostructures of these as-synthesized nanocomposites, which is characterized by high-resolution transmission electron microscopy and electron energy-loss spectroscopy.

We synthesized Fe(3)O(4) nanoparticle/reduced graphene oxide (RGO-Fe(3)O(4)) nanocomposites and evaluated their performance as anodes in both half and full coin cells. The nanocomposites were synthesized through a chemical co-precipitation of Fe(2+) and Fe(3+) in the presence of graphene oxides within an alkaline solution and a subsequent high-temperature reduction reaction in argon (Ar) environment. The morphology and microstructures of the fabricated RGO-Fe(3)O(4) nanocomposites were characterized using various techniques. The results indicated that the Fe(3)O(4) nanoparticles had relatively homogeneous dispersions on the RGO sheet surfaces. These as-synthesized RGO-Fe(3)O(4) nanocomposites were used as anodes for both half and full lithium-ion cells. Electrochemical measurement results exhibit a high reversible capacity which is about two and a half times higher than that of graphite-based anodes at a 0.05C rate, and an enhanced reversible capacity of about 200 mAh g(-1) even at a high charge/discharge rate of 10C (9260 mA g(-1)) in half cells. Most important of all, these fabricated novel nanostructures also show exceptional capacity retention with the assembled RGO-Fe(3)O(4)/LiNi(1/3)Mn(1/3)Co(1/3)O(2) full cell at different C rates. This outstanding electrochemical behavior can be attributed to the unique microstructure, morphology, texture, surface properties of the nanocomposites, and combinative effects from the different chemical composition in the nanocomposites.