Search

Derived from the lateral fusion of benzene rings, acenes are a class of π-conjugated molecules containing a single aromatic sextet, where system size is inversely correlated with chemical stability. In the pursuit of creating graphene nanoribbons/nanowires, several extended-ring structures have been synthesized through linear combinations of azaacenes and pyrene. Importantly, these extended systems demonstrate enhanced chemical stability and allow for the construction of macromolecular-sized structures. Here, we present a combined quantum-chemical and experimental study to reveal the cost of these improved characteristics in fully carbon-based systems. The results clearly show that pyrene moieties inserted among acene units do not result in long acene-like structures, rather the pyrene-inserted acene is, electronically, a series of (nearly) isolated acenes. The origin of pyrene's electronic blocking effect and implications on oxidized and photoexcited states of these extended-ring systems are detailed. The results of this investigation definitively show that coupling pyrene in an orthogonal orientation (through the 4, 5/9, 10 positions or e/l faces) to acenes should be eschewed if nanographene-/nanowire-like structures are desired. [ABSTRACT FROM AUTHOR]

Highly oxidizing radical cation salts can be used as chemical oxidants in a wide variety of applications. While some are commercial and others can be made, stability has been a problem with many of these organic-based reagents. We sought a method to increase redox potentials of organic compounds, to yield radical cation salts that do not suffer the same instability as their triarylamine counterparts. Using phenothiazines, we (i) blocked the positions para to nitrogen with a substituent containing strong covalent bonds, using an electron-withdrawing group to increase oxidation potential, while at the same time (ii) introduced strain at the positions ortho to nitrogen to further raise the oxidation potential by preventing geometric relaxation of the oxidized state. Here we synthesized the phenothiazine derivative, N-ethyl-1,9-dimethyl-3,7-bis(trifluoromethyl)phenothiazine to test this hypothesis. Indeed, oxidation potentials reflect additive substituent effects, yielding a high-potential redox couple with a stable radical cation. Stability tests in solution and the solid state show that the radical cation form of this phenothiazinium is stable and can be used to oxidize other organic compounds in solution. [ABSTRACT FROM AUTHOR]

Androgen-deprivation therapy (ADT) is only a palliative measure, and prostate cancer invariably recurs in a lethal, castration-resistant form (CRPC). Prostate cancer resists ADT by metabolizing weak, adrenal androgens to growth-promoting 5α-dihydrotestosterone (DHT), the preferred ligand for the androgen receptor (AR). Developing small-molecule inhibitors for the final steps in androgen metabolic pathways that utilize 17-oxidoreductases required probes that possess fluorescent groups at C-3 and intact, naturally occurring functionality at C-17. Application of the Pictet–Spengler condensation to substituted 4-(2-aminoethyl)coumarins and 5α-androstane-3-ones furnished spirocyclic, fluorescent androgens at the desired C-3 position. Condensations required the presence of activating C-7 amino or N,N-dialkylamino groups in the 4-(2-aminoethyl)coumarin component of these condensation reactions. Successful Pictet–Spengler condensation, for example, of DHT with 9-(2-aminoethyl)-2,3,6,7-tetrahydro-1H,5H,11H-pyrano[2,3-f]pyrido[3,2,1-ij]quinolin-11-one led to a spirocyclic androgen, (3R,5S,10S,13S,17S)-17-hydroxy-10,13-dimethyl-1,2,2′,3′,4,5,6,7,8,8′,9,9′,10,11,12,12′,13,13′,14,15,16,17-docosahydro-7′H,11′H-spiro-[cyclopenta[a]phenanthrene-3,4′-pyrido[3,2,1-ij]pyrido[4′,3′:4,5]pyrano[2,3-f]quinolin]-5′(1′H)-one. Computational modeling supported the surrogacy of the C-3 fluorescent DHT analog as a tool to study 17-oxidoreductases for intracrine, androgen metabolism. [ABSTRACT FROM AUTHOR]

N-Ethyl-3,7-bis(trifluoromethyl)phenothiazine is a highly soluble redox shuttle for overcharge protection in lithium-ion batteries with an oxidation potential of ca. 3.8 V vs. Li+/0 in carbonate solvents. This compound has enabled extensive overcharge protection of LiFePO4/graphite cells and does so at high charging rates at high concentrations. Our initial synthesis of this compound suffered from low yields and difficult purifications. Here we report a cleaner, higher-yielding synthesis and additional characterization of the product and its stable radical cation salt. [ABSTRACT FROM AUTHOR]

Stable electron-donating organic compounds are of interest for numerous applications that require reversible electron-transfer reactions. Although many organic compounds are stable one-electron donors, removing a second electron from a small molecule to form its dication usually leads to rapid decomposition. For cost-effective electrochemical energy storage utilizing organic charge-storage species, the creation of high-capacity materials requires stabilizing more charge whilst keeping molecular weights low. Here we report the simple modification of N-ethylphenothiazine, which is only stable as a radical cation (not as a dication), and demonstrate that introducing electron-donating methoxy groups para to nitrogen leads to dramatically improved stability of the doubly oxidized (dication) state. Our results reveal that this derivative is more stable than an analogous compound with substituents that do not allow for further charge delocalization, rendering it a promising scaffold for developing atom-efficient, two-electron donors. [ABSTRACT FROM AUTHOR]

Quantitative singlet fission has been observed for a variety of acene derivatives such as tetracene and pentacene, and efforts to extend the library of singlet fission compounds is of current interest. Preliminary calculations suggest anthradithiophenes exhibit significant exothermicity between the first optically-allowed singlet state, S1, and 2 × T1 with an energy difference of ＞5000 cm−1. Given the fulfillment of this ingredient for singlet fission, here we investigate the singlet fission capability of a difluorinated anthradithiophene dimer (2ADT) covalently linked by a (dimethylsilyl)ethane bridge and derivatized by triisobutylsilylethynyl (TIBS) groups. Photophysical characterization of 2ADT and the single functionalized ADT monomer were carried out in toluene and acetone solution via absorption and fluorescence spectroscopy, and their photo-initiated dynamics were investigated with time-resolved fluorescence (TRF) and transient absorption (TA) spectroscopy. In accordance with computational predictions, two conformers of 2ADT were observed via fluorescence spectroscopy and were assigned to structures with the ADT cores trans or cis to one another about the covalent bridge. The two conformers exhibited markedly different excited state deactivation mechanisms, with the minor trans population being representative of the ADT monomer showing primarily radiative decay, while the dominant cis population underwent relaxation into an excimer geometry before internally converting to the ground state. The excimer formation kinetics were found to be solvent dependent, yielding time constants of ∼1.75 ns in toluene, and ∼600 ps in acetone. While the difference in rates elicits a role for the solvent in stabilizing the excimer structure, the rate is still decidedly long compared to most singlet fission rates of analogous dimers, suggesting that the excimer is neither a kinetic nor a thermodynamic trap, yet singlet fission was still not observed. The result highlights the sensitivity of the electronic coupling element between the singlet and correlated triplet pair states, to the dimer conformation in dictating singlet fission efficiency even when the energetic requirements are met. [ABSTRACT FROM AUTHOR]

We report substituent effects on conformational preferences and hole mobilities of 2,5-bis-(thiophen-2-yl)thieno[3,2-b]thiophenes (BTTT) monomer and dimer, and hexyl derivatives. We employ single-crystal X-ray diffraction, quantum mechanical calculations, and thin-film transistors to explore the difference between monomer, dimer, and effect of hexyl substitution. The hexyl-substituted molecules show marked differences in solid-state packing compared to the unsubstituted analogs. Most notably, the alkylated monomer crystal structure exhibits terminal thiophenes in the syn conformation. In contrast, the unsubstituted monomer adopts the more common anti conformation. The hexyl-substituted dimer, however, features a mixture of syn and anti thiophenes. Gas phase conformations of oligomers rationalize the intrinsic conformational preferences. We use a multimode simulation to compute hole mobilities and find excellent agreement with experiment. Theoretical results support our hypothesis that alkyl side chains cause these small molecules to adopt orientations that enhance hole mobilities by an order of magnitude upon hexyl substitution of the monomer. [ABSTRACT FROM AUTHOR]

Electron-withdrawing substituents are introduced onto the phenothiazine core to raise its oxidation potential for use as a redox shuttle in high-voltage lithium-ion batteries. A perfluorinated derivative oxidizes at 4.3 V vs. Li+/0, and functions for ca. 500 h of 100% overcharge in LiNi0.8Co0.15Al0.05O2/graphite coin cells at a charging rate of C/10. [ABSTRACT FROM AUTHOR]

Two new small-molecule enzyme mimics of carbonic anhydrase were prepared and characterized. These complexes contain the salen-like ligand bis(hydroxyphenyl)phenanthroline. This ligand is similar to the salen-type ligands previously incorporated into carbonic anhydrase mimics but contains no hydrolyzable imine groups and therefore serves as a promising ligand scaffold for the synthesis of a more robust CO2 hydration catalyst. These homogeneous catalysts were investigated for CO2 hydration in concentrated primary amine solutions through which a dilute CO2 (14%) fluid stream was flowed and showed exceptional activity for increased CO2 absorption rates. [ABSTRACT FROM AUTHOR]

Anthradithiophenes (ADTs) are typically synthesized as inseparable mixtures of regioisomers. In this paper, we describe the synthesis of desymmetrized anthradithiophenes containing one trialkylsilylethyne solubilizing group, which allowed chromatographic separation of the three resulting isomers. Cyclic voltammograms, as well as absorption and emission spectra for all isomers, were nearly identical. However, X-ray crystallography revealed that the positions of the sulfur atoms in each isomer strongly influence crystal packing, corroborating calculations that show the S–π interaction to be less stabilizing than the C–H–π interaction. Isomer 3c packs in a pseudo 1-D fashion while isomers 3a and 3b pack as isolated π-stacked pairs. Isomer 3c shows a field-effect mobility four orders of magnitude higher than isomers 3a and 3b, presumably due to this difference in packing motif. [ABSTRACT FROM AUTHOR]

Understanding the solid-state structure of the bulk heterojunction provides insight into how to improve the performance of nonfullerene acceptors in organic solar cells. We have characterized the self-assembly of three functionalized pentacene acceptors in single crystals, neat films and bulk heterojunctions formed by blending with a diketopyrrolopyrrole-based molecular donor. Atomic force microscopy, grazing incidence wide-angle X-ray scattering and optical spectroscopy indicate that the presence of the donor perturbs the packing and texture of acceptors with smaller substituents. The structural characterization explains the differences in performance among the three acceptors studied and suggests that, unlike fullerenes, disordered domains of molecular acceptors with planar molecular structure have inefficient electron transport in BHJ thin films. [ABSTRACT FROM AUTHOR]

3,7-Disubstituted N-ethylphenothiazine derivatives were synthesized as redox shuttle candidates for lithium-ion batteries. Battery cycling results show that three derivatives prevent overcharge. [ABSTRACT FROM AUTHOR]

Two new small-molecule enzyme mimics of carbonic anhydrase were prepared and characterized. These complexes contain the salen-like ligand bis(hydroxyphenyl)phenanthroline. This ligand is similar to the salen-type ligands previously incorporated into carbonic anhydrase mimics but contains no hydrolyzable imine groups and therefore serves as a promising ligand scaffold for the synthesis of a more robust CO2 hydration catalyst. These homogeneous catalysts were investigated for CO2 hydration in concentrated primary amine solutions through which a dilute CO2 (14%) fluid stream was flowed and showed exceptional activity for increased CO2 absorption rates.

Acenes larger than pentacene are predicted to possess enticing electronic properties, but are insoluble and prone to rapid decomposition. Utilizing a combination of functionalization strategies, we present stable, solution-processable hexacenes and an evaluation of their hole and electron transport properties.

Amide functionalized anthradithiophenes (ADTs) play active acceptor roles in polymer bulk-heterojunction solar cells. The first separation of ADT isomers is reported, and the regiochemistry of the ADT has significant impact on crystal packing and solar cell performance. Cell efficiency up to 0.80%, due in large part to high open-circuit voltage (V(OC) > 1.0 V), is achieved in bulk-heterojunction solar cells comprising syn-ADT and poly(3-hexylthiophene).

Functionalization of the pro-cata positions of pentacene with groups held perpendicular to the aromatic plane, in this case through a rigid 1,3-dioxole unit, yields pentacene derivatives that are stable and soluble, and still maintain edge-to-face interactions in the solid state.