Search

A two-dimensional (2D) covalent monolayer based on [4 + 4] cycloaddition reactions between adjacent anthracene units was synthesized at an air/water interface. For structural analysis, tip-enhanced Raman spectroscopy (TERS) provides direct evidence for the covalent bonds formed between monomer molecules. For the first time, progress of the photopolymerization reaction was monitored by irradiation ( λ = 385 nm) of the monomer monolayer for different times, based on averaged TER spectra extracted from maps. In addition, a 2D polymerization on a Au (111) substrate was realized, which opens up new possibilities for such chemical transformations. This work uses TERS as a minimally invasive tool to investigate how the reaction conditions affect polymerization conversion. We show that the high sensitivity and the high spatial resolution of TERS can be used to estimate the crystallinity of 2D covalent monolayers, which is a key question in polymer synthesis., (This journal is © The Royal Society of Chemistry 2019.)

Dendronized polymers (DPs) are large and compact main-chain linear polymers with a cylindrical shape and cross-sectional diameters of up to ∼15 nm. They are therefore considered molecular objects, and it was of interest whether given their experimentally accessible, well-defined dimensions, the density of individual DPs could be determined. We present measurements on individual, deposited DP chains, providing molecular dimensions from scanning and transmission electron microscopy and mass-per-length values from quantitative scanning transmission electron microscopy. These results are compared with density values obtained from small-angle X-ray scattering on annealed bulk specimen and with classical envelope density measurements, obtained using hydrostatic weighing or a density gradient column. The samples investigated comprise a series of DPs with side groups of dendritic generations g = 1-8. The key findings are a very large spread of the density values over all samples and methods, and a consistent increase of densities with g over all methods. While this work highlights the advantages and limitations of the applied methods, it does not provide a conclusive answer to the question of which method(s) to use for the determination of densities of individual molecular objects. We are nevertheless confident that these first attempts to answer this challenging question will stimulate more research into this important aspect of polymer and soft matter science.

We present a comprehensive investigation of main-chain scission processes affecting peripherally charged and neutral members of a class of dendronized polymers (DPs) studied in our laboratory. In these thick, sterically highly congested macromolecules, scission occurs by exposure to solvents, in some cases at room temperature, in others requiring modest heating. Our investigations rely on gel permeation chromatography and atomic force microscopy and are supported by molecular dynamics simulations as well as by electron paramagnetic resonance spectroscopy. Strikingly, DP main-chain scission depends strongly on two factors: first the solvent, which must be highly polar to induce scission of the DPs, and second the dendritic generation g . In DPs of generations 1 ≤ g ≤ 8, scission occurs readily only for g = 5, no matter whether the polymer is charged or neutral. Much more forcing conditions are required to induce degradation in DPs of g ≠ 5. We propose solvent swelling as the cause for the main-chain scission in these individual polymer molecules, explaining in particular the strong dependence on g : g < 5 DPs resemble classical polymers and are accessible to the strongly interacting, polar solvents, whereas g > 5 DPs are essentially closed off to solvent due to their more closely colloidal character. g = 5 DPs mark the transition between these two regimes, bearing strongly sterically congested side chains which are still solvent accessible to some degree. Our results suggest that, even in the absence of structural elements which favour scission such as cross-links, solvent swelling may be a generally applicable mechanochemical trigger. This may be relevant not only for DPs, but also for other types of sterically strongly congested macromolecules.

A series of novel quinones was synthesized by reacting tetrabromo- p -benzoquinone with amino oligo(ethylene glycol) dendrons of generation numbers g = 0-2. According to the performed shake-flask experiments, their aqueous solubility ( S = 18 mg l -1 -1.6 g ml -1 ) and partition coefficients (log  P oct/wat = 2.53-0.21) can be tuned in a wide range as a function of g . In vitro cytotoxicity assays of tetrabromo- p -benzoquinone and its derivatives against MCF-7 human breast cancer cells showed a concentration- and generation-specific biological activity with IC 50 -values as low as 0.8 μM. Further investigations revealed a considerable selectivity against cancer cells, as indicated by a weak cytotoxicity against human skin fibroblast cells (>80% survival) within the studied range of concentrations. The results demonstrate that these novel amino oligo(ethylene glycol) dendrons depict versatile tools to ameliorate physical and pharmacological characteristics of extremely hydrophobic molecules and make them susceptible to biological applications.

Two series of dendronized polymers (DPs) of generations g = 1-4 with different levels of dendritic substitution (low and high) and a solvatochromic probe at g = 1 level are used to study their swelling behavior in a collection of solvents largely differing in polarity as indicated by the Kamlet-Taft parameters. This is done by measuring the UV-Vis spectra of all samples in all solvents and determining the longest wavelength absorptions ( λ max ). The λ max values fall into a range defined by the extreme situations, when the solvatochromic probe is either fully surrounded by solvent or completely shielded against it. The former situation is achieved in a model compound and the latter situation is believed to be reached when in a poor solvent the dendritic shell around the backbone is fully collapsed. We observe that solvent penetration into the interior of the DPs decreases with increasing g and does so faster for the more highly dendritically substituted series than for the less highly substituted one. Interestingly, the swelling of the more highly substituted DP series already at the g = 4 level has decreased to approximately 20% of that at the g = 1 level which supports an earlier proposal that high g DPs can be viewed as nano-sized molecular objects. Furthermore, when comparing these two DP series with a g = 1-6 series of dendrimers investigated by Fréchet et al. it becomes evident that even the less substituted series of DPs is much less responsive to solvent changes as assessed by the solvatochromic probe than the dendrimers, suggesting the branches around the (polymeric) core in DPs to be more densely packed compared to those in dendrimers, thus, establishing a key difference between these two dendritic macromolecules.

Creation of polymers comprised of repeat units that can create topologically planar macromolecules (rather than linear) has been the topic of several recent studies in the field of synthetic polymer chemistry. Such novel macromolecules, known as 2D polymers, are the result of advanced synthetic methodology which allows creation of monolayer sheets with a periodic internal structure and functional groups placed at predetermined sites under mild conditions. Given the promising potentials of 2D polymers, this feature paper aims at discussing the concept of these novel macromolecules from a topological viewpoint in Section 1. This is followed by spotlighting the expected behavior of 2D polymers in the context of polymer physics (entropy elasticity, strength, percolation, and persistence) and polymer chemistry (copolymers and growth kinetics) in Section 2. Section 3 delineates synthetic and analytical matters associated with 2D polymers followed by a brief final section highlighting the potential of these sheet-like macromolecules for application purposes. We hope this article will trigger the interest of chemists, physicists and engineers to help develop this encouraging new class of materials further such that societally relevant applications will be accessible in the market soon.

The internal organization of macromonomers (MGs) consisting of all-thiophene dendrons of generation g = 2 and 3 attached to a phenyl core, as well as of the dendronized polymers resulting from polymerization of these macromonomers (PG2 and PG3, respectively), has been investigated using theoretical methods. The conformational preferences of the MGs, determined using density functional theory calculations, are characterized by the relative orientation between dendrons and core. We find that the strain of the MGs increases with the generation number and is alleviated by small conformational re-arrangements of the peripheral thiophene rings. The conformations obtained for the MGs have subsequently been used to construct models for the dendronized polymers. Classical molecular dynamics simulations have evidenced that the interpenetration of dendrons belonging to different repeat units is very small for PG2. In contrast, the degree of interpenetration is found to be very high for PG3, which also shows a significant degree of backfolding (i.e. occurrence of peripheral methyl groups approaching the backbone). Consequently, PG2 behaves as a conventional linear flexible polymer bearing bulk pendant groups, whereas PG3 is better characterized as a semirigid homogeneous cylinder. The two polymers are stabilized by π-π stacking interactions, even though these are significantly more abundant for PG3 than for PG2; the average numbers of interactions per repeat unit are 3.0 and 8.8 for PG2 and PG3, respectively. While in these interactions the thiophene rings can adopt either parallel (sandwich) or perpendicular (T-shaped) dispositions, the former scenario turns out to be the most abundant.

In an attempt to relate atomistic information to the rheological response of a large dendritic object, interand intramolecular hydrogen bonds and p,p-interactions have been characterized in a dendronized polymer (DP) that consists of a polymethylmethacrylate backbone with tree-like branches of generation four (PG4) and contains both amide and aromatic groups. Extensive atomistic molecular dynamics simulations have been carried out on (i) an isolated PG4 chain and (ii) ten dimers formed by two PG4 chains associated with different degrees of interpenetration. Results indicate that the amount of nitrogen atoms involved in hydrogen bonding is ~11% while ~15% of aromatic groups participate in p,pinteractions. Furthermore, in both cases intramolecular interactions clearly dominate over intermolecular ones, while exhibiting markedly different behaviors. Specifically, the amount of intramolecular hydrogen bonds increases when the interpenetration of the two chains decreases, whereas intramolecular p,pinteractions remain practically insensitive to the amount of interpenetration. In contrast, the strength of the corresponding two types of intermolecular interactions decreases with interpenetration. Although the influence of complexation on the density and cross-sectional radius is relatively small, interpenetration affects significantly the molecular length of the DP. These results support the idea of treating DPs as long colloidal molecules.

Novel first (G1) and second (G2) generation dendrimers based on three-fold branched oligoethylene glycol dendrons are efficiently synthesized which show characteristic thermoresponsive behavior and negligible cytotoxicity (for G2).

A series of first (PG 1) and second generation (PG 2) dendronized polymers were synthesized which exhibit fast and sharp phase transitions with negligible hystereses in aqueous solutions and apparent lower critical solution temperatures (LCSTs) in the range of 33-49 degrees C.

A novel one-pot "AB2 + AC2" approach based on palladium catalyzed Suzuki polycondensation was developed to prepare hyperbranched aryl/alkyl polymers with a high degree of branching.